1.首先引入下面两个NuGet包
2.安装完成后App_Start文件夹下出现SwaggerConfig.cs和SwaggerNet.cs
3.打开SwaggerNet.cs文件,注释下面的代码:
4.右键项目属性,在Web选项中,启动操作勾选特定页,输入swagger/ui/index#/ 当然这不是必须的
在项目属性的生成项中勾选输出XML文档
5.在App_Start文件夹下创建SwaggerCacheProvider.cs
using Swashbuckle.Swagger; using System; using System.Collections.Concurrent; using System.Collections.Generic; using System.IO; using System.Linq; using System.Web; using System.Xml; namespace WebApi.App_Start { public class SwaggerCacheProvider : ISwaggerProvider { private readonly ISwaggerProvider _swaggerProvider; private static ConcurrentDictionary<string, SwaggerDocument> _cache = new ConcurrentDictionary<string, SwaggerDocument>(); private readonly string _xml; ////// /// /// /// xml文档路径 public SwaggerCacheProvider(ISwaggerProvider swaggerProvider, string xml) { _swaggerProvider = swaggerProvider; _xml = xml; } public SwaggerDocument GetSwagger(string rootUrl, string apiVersion) { var cacheKey = string.Format("{0}_{1}", rootUrl, apiVersion); SwaggerDocument srcDoc = null; //只读取一次 if (!_cache.TryGetValue(cacheKey, out srcDoc)) { srcDoc = _swaggerProvider.GetSwagger(rootUrl, apiVersion); srcDoc.vendorExtensions = new Dictionary<string, object> { { "ControllerDesc", GetControllerDesc() } }; _cache.TryAdd(cacheKey, srcDoc); } return srcDoc; } /// /// 从API文档中读取控制器描述 /// /// 所有控制器描述 public ConcurrentDictionary<string, string> GetControllerDesc() { string xmlpath = _xml; ConcurrentDictionary<string, string> controllerDescDict = new ConcurrentDictionary<string, string>(); if (File.Exists(xmlpath)) { XmlDocument xmldoc = new XmlDocument(); xmldoc.Load(xmlpath); string type = string.Empty, path = string.Empty, controllerName = string.Empty; string[] arrPath; int length = -1, cCount = "Controller".Length; XmlNode summaryNode = null; foreach (XmlNode node in xmldoc.SelectNodes("//member")) { type = node.Attributes["name"].Value; if (type.StartsWith("T:")) { //控制器 arrPath = type.Split('.'); length = arrPath.Length; controllerName = arrPath[length - 1]; if (controllerName.EndsWith("Controller")) { //获取控制器注释 summaryNode = node.SelectSingleNode("summary"); string key = controllerName.Remove(controllerName.Length - cCount, cCount); if (summaryNode != null && !string.IsNullOrEmpty(summaryNode.InnerText) && !controllerDescDict.ContainsKey(key)) { controllerDescDict.TryAdd(key, summaryNode.InnerText.Trim()); } } } } } return controllerDescDict; } } }
6.配置SwaggerConfig.cs //注下面代码已对Swagger默认接口做了隐藏
(需要修改XML文件和swagger.js文件的路径，注意：swagger.js文件的路径区分大小写，支持项目名称为.命名的项目，如：API项目名称为Shop.API，js文件放在Scripts下面，则路径为：Shop.API.Scripts.swagger.js，路径不正确或者路径大小写不正确，会导致JS文件不能正常加载汉化。)
using System.Web.Http; using WebActivatorEx; using WebApi; using Swashbuckle.Application; using System; using Swashbuckle.Swagger; using System.Web.Http.Description; using System.Linq; using WebApi.App_Start; [assembly: PreApplicationStartMethod(typeof(SwaggerConfig), "Register")] namespace WebApi { ////// 配置SwaggerConfig /// public class SwaggerConfig { /// /// Register /// public static void Register() { var thisAssembly = typeof(SwaggerConfig).Assembly; GlobalConfiguration.Configuration .EnableSwagger(c => { c.SingleApiVersion("v1", "WebApi User Guide"); c.IncludeXmlComments(GetXmlCommentsPath(GetXmlCommentsPath(thisAssembly.GetName().Name))); c.CustomProvider((defaultProvider) => new SwaggerCacheProvider(defaultProvider, string.Format(@"{0}\bin\WebApi.XML", System.AppDomain.CurrentDomain.BaseDirectory))); c.DocumentFilter ();//隐藏Swagger 自带API及隐藏具体Api }) .EnableSwaggerUi(c => { c.InjectJavaScript(System.Reflection.Assembly.GetExecutingAssembly(), "WebApi.scripts.swagger.js"); }); } /// /// 获取接口的注释 /// /// /// protected static string GetXmlCommentsPath(string name) { return string.Format(@"{0}\bin\WebApi.XML", AppDomain.CurrentDomain.BaseDirectory, name); } } } /// /// 隐藏Swagger默认接口 /// [AttributeUsage(AttributeTargets.Method | AttributeTargets.Class)] public partial class HiddenApiAttribute : Attribute { } /// /// 隐藏Swagger默认接口 /// public class HiddenApiFilter : IDocumentFilter { public void Apply(SwaggerDocument swaggerDoc, SchemaRegistry schemaRegistry, IApiExplorer apiExplorer) { foreach (ApiDescription apiDescription in apiExplorer.ApiDescriptions) { var _key = "/" + apiDescription.RelativePath.TrimEnd('/'); // 过滤 swagger 自带的接口 if (_key.Contains("/api/Swagger") && swaggerDoc.paths.ContainsKey(_key)) swaggerDoc.paths.Remove(_key); //隐藏具体Api接口 需要在想隐藏的api 上面添加特性[HiddenApi] if (Enumerable.OfType (apiDescription.GetControllerAndActionAttributes ()).Any()) { string key = "/" + apiDescription.RelativePath; if (key.Contains("?")) { int idx = key.IndexOf("?", System.StringComparison.Ordinal); key = key.Substring(0, idx); } swaggerDoc.paths.Remove(key); } } } }
7.创建js文件把下面代码拷贝进去保存即可 并做嵌入的资源 js代码如下： //这一步是为了汉化使用
'use strict'; window.SwaggerTranslator = { _words: [], translate: function () { var $this = this; $('[data-sw-translate]').each(function () { $(this).html($this._tryTranslate($(this).html())); $(this).val($this._tryTranslate($(this).val())); $(this).attr('title', $this._tryTranslate($(this).attr('title'))); }); }, setControllerSummary: function () { try { console.log($("#input_baseUrl").val()); $.ajax({ type: "get", async: true, url: $("#input_baseUrl").val(), dataType: "json", success: function (data) { var summaryDict = data.ControllerDesc; console.log(summaryDict); var id, controllerName, strSummary; $("#resources_container .resource").each(function (i, item) { id = $(item).attr("id"); if (id) { controllerName = id.substring(9); try { strSummary = summaryDict[controllerName]; if (strSummary) { $(item).children(".heading").children(".options").first().prepend('
8.因对swagger默认接口做了隐藏所以我们要自己写一下 //我就随便写了一下 具体需求你们自己定义
9.效果如图所示：
转：https://www.cnblogs.com/exyz/p/11449591.html