Assignment Operator
The assignment operator (a = b) initializes or updates the value of a with the value of b:
let b = 10
var a = 5
a = b
// a is now equal to 10
If the right side of the assignment is a tuple with multiple values, its elements can be decomposed into multiple constants or variables at once:
let (x, y) = (1, 2)
// x is equal to 1, and y is equal to 2
Unlike the assignment operator in C and Objective-C, the assignment operator in Swift does not itself return a value. The following statement is not valid:
if x = y {
// This is not valid, because x = y does not return a value.
}
This feature prevents the assignment operator (=) from being used by accident when the equal to operator (==) is actually intended. By making if x = y invalid, Swift helps you to avoid these kinds of errors in your code.
Arithmetic Operators
Swift supports the four standard arithmetic operators for all number types:
Addition (+)
Subtraction (-)
Multiplication (*)
Division (/)
1 + 2 // equals 3
5 - 3 // equals 2
2 * 3 // equals 6
10.0 / 2.5 // equals 4.0
Unlike the arithmetic operators in C and Objective-C, the Swift arithmetic operators do not allow values to overflow by default. You can opt in to value overflow behavior by using Swift’s overflow operators (such as a &+ b). See Overflow Operators.
The addition operator is also supported for String
concatenation:
"hello, " + "world" // equals "hello, world"
Remainder Operator
The remainder operator (a % b) works out how many multiples of b will fit inside a
and returns the value that is left over (known as the remainder).
Here’s how the remainder operator works. To calculate 9 % 4
, you first work out how many 4
s will fit inside 9:
You can fit two 4s inside 9, and the remainder is 1 (shown in orange).In Swift, this would be written as:
9 % 4 // equals 1
To determine the answer for a % b, the % operator calculates the following equation and returns remainder as its output:
a = (b x some multiplier) + remainder
where some multiplier is the largest number of multiples of b that will fit inside a.
Inserting 9 and 4 into this equation yields:
9 = (4 x 2) + 1
The same method is applied when calculating the remainder for a negative value of a:
-9 % 4 // equals -1
Inserting -9 and 4
into the equation yields:
-9 = (4 x -2) + -1
giving a remainder value of -1.
The sign of b is ignored for negative values of b. This means that a % b and a % -b always give the same answer.
Unary Minus Operator
The sign of a numeric value can be toggled using a prefixed -, known as the unary minus operator:
let three = 3
let minusThree = -three // minusThree equals -3
let plusThree = -minusThree // plusThree equals 3, or "minus minus three"
The unary minus operator (-) is prepended directly before the value it operates on, without any white space.
Unary Plus Operator
The unary plus operator (+) simply returns the value it operates on, without any change:
let minusSix = -6
let alsoMinusSix = +minusSix // alsoMinusSix equals -6
Although the unary plus operator doesn’t actually do anything, you can use it to provide symmetry in your code for positive numbers when also using the unary minus operator for negative numbers.
Compound Assignment Operators
Like C, Swift provides compound assignment operators that combine assignment (=) with another operation. One example is the addition assignment operator (+=):
var a = 1
a += 2
// a is now equal to 3
The expression a += 2 is shorthand for a = a + 2. Effectively, the addition and the assignment are combined into one operator that performs both tasks at the same time.
Comparison Operators
Swift supports all standard C comparison operators:
Equal to (a == b)
Not equal to (a != b)
Greater than (a > b)
Less than (a < b)
Greater than or equal to (a >= b)
Less than or equal to (a <= b)
Each of the comparison operators returns a Bool value to indicate whether or not the statement is true:
1 == 1 // true because 1 is equal to 1
2 != 1 // true because 2 is not equal to 1
2 > 1 // true because 2 is greater than 1
1 < 2 // true because 1 is less than 2
1 >= 1 // true because 1 is greater than or equal to 1
2 <= 1 // false because 2 is not less than or equal to 1
Comparison operators are often used in conditional statements, such as the if statement:
let name = "world"
if name == "world" {
print("hello, world")
} else {
print("I'm sorry \(name), but I don't recognize you")
}
// Prints "hello, world", because name is indeed equal to "world".
Ternary Conditional Operator
The ternary conditional operator is a special operator with three parts, which takes the form question ? answer1 : answer2
. It is a shortcut for evaluating one of two expressions based on whether question
is true or false. If question
is true, it evaluates answer1
and returns its value; otherwise, it evaluates answer2
and returns its value.
The ternary conditional operator is shorthand for the code below:
if question {
answer1
} else {
answer2
}
Here’s an example, which calculates the height for a table row. The row height should be 50 points taller than the content height if the row has a header, and 20 points taller if the row doesn’t have a header:
let contentHeight = 40
let hasHeader = true
let rowHeight = contentHeight + (hasHeader ? 50 : 20)
// rowHeight is equal to 90
The preceding example is shorthand for the code below:
let contentHeight = 40
let hasHeader = true
let rowHeight: Int
if hasHeader {
rowHeight = contentHeight + 50
} else {
rowHeight = contentHeight + 20
}
// rowHeight is equal to 90
Nil-Coalescing Operator
The nil-coalescing operator (a ?? b) unwraps an optional a if it contains a value, or returns a default value b if a is nil. The expression a is always of an optional type. The expression b must match the type that is stored inside a.
The nil-coalescing operator is shorthand for the code below:
a != nil ? a! : b
The code above uses the ternary conditional operator and forced unwrapping (a!) to access the value wrapped inside a when a is not nil, and to return b
otherwise. The nil-coalescing operator provides a more elegant way to encapsulate this conditional checking and unwrapping in a concise and readable form.
The example below uses the nil-coalescing operator to choose between a default color name and an optional user-defined color name:
let defaultColorName = "red"
var userDefinedColorName: String? // defaults to nil
var colorNameToUse = userDefinedColorName ?? defaultColorName
// userDefinedColorName is nil, so colorNameToUse is set to the default of "red"
The userDefinedColorName variable is defined as an optional String, with a default value of nil. Because userDefinedColorName is of an optional type, you can use the nil-coalescing operator to consider its value. In the example above, the operator is used to determine an initial value for a String variable called colorNameToUse. Because userDefinedColorName is nil, the expression userDefinedColorName ?? defaultColorName returns the value of defaultColorName, or "red".
If you assign a non-nil value to userDefinedColorName and perform the nil-coalescing operator check again, the value wrapped inside userDefinedColorName is used instead of the default:
userDefinedColorName = "green"
colorNameToUse = userDefinedColorName ?? defaultColorName
// userDefinedColorName is not nil, so colorNameToUse is set to "green"
Range Operators
Swift includes two range operators, which are shortcuts for expressing a range of values.
Closed Range Operator
The closed range operator (a...b) defines a range that runs from a to b, and includes the values a and b. The value of a must not be greater than b.
The closed range operator is useful when iterating over a range in which you want all of the values to be used, such as with a for -in loop:
for index in 1...5 {
print("\(index) times 5 is \(index * 5)")
}
// 1 times 5 is 5
// 2 times 5 is 10
// 3 times 5 is 15
// 4 times 5 is 20
// 5 times 5 is 25
Half-Open Range Operator
The half-open range operator (a..half-openbecause it contains its first value, but not its final value. As with the closed range operator, the value of a must not be greater than b. If the value of a is equal to b, then the resulting range will be empty.Half-open ranges are particularly useful when you work with zero-based lists such as arrays, where it is useful to count up to (but not including) the length of the list:
let names = ["Anna", "Alex", "Brian", "Jack"]
let count = names.count
for i in 0..
Logical Operators
Logical operators modify or combine the Boolean logic values true
and false
. Swift supports the three standard logical operators found in C-based languages:
Logical NOT (!a
)
Logical AND (a && b
)
Logical OR (a || b
)
Logical NOT Operator
The logical NOT operator (!a
) inverts a Boolean value so that true
becomes false
, and false
becomes true
.
The logical NOT operator is a prefix operator, and appears immediately before the value it operates on, without any white space. It can be read as “not a
”, as seen in the following example:
let allowedEntry = false
if !allowedEntry {
print("ACCESS DENIED")
}
// Prints "ACCESS DENIED"
The phrase if !allowedEntry
can be read as “if not allowed entry.” The subsequent line is only executed if “not allowed entry” is true; that is, if allowedEntry
is false
.
As in this example, careful choice of Boolean constant and variable names can help to keep code readable and concise, while avoiding double negatives or confusing logic statements.
Logical AND Operator
The logical AND operator (a && b
) creates logical expressions where both values must be true
for the overall expression to also be true
.
If either value is false
, the overall expression will also be false
. In fact, if the first value is false
, the second value won’t even be evaluated, because it can’t possibly make the overall expression equate to true
. This is known as short-circuit evaluation.
This example considers two Bool
values and only allows access if both values are true
:
let enteredDoorCode = true
let passedRetinaScan = false
if enteredDoorCode && passedRetinaScan {
print("Welcome!")
} else {
print("ACCESS DENIED")
}
// Prints "ACCESS DENIED"
Logical OR Operator
The logical OR operator (a || b
) is an infix operator made from two adjacent pipe characters. You use it to create logical expressions in which only one of the two values has to be true
for the overall expression to be true
.
Like the Logical AND operator above, the Logical OR operator uses short-circuit evaluation to consider its expressions. If the left side of a Logical OR expression is true
, the right side is not evaluated, because it cannot change the outcome of the overall expression.
In the example below, the first Bool
value (hasDoorKey
) is false
, but the second value (knowsOverridePassword
) is true
. Because one value is true
, the overall expression also evaluates to true
, and access is allowed:
let hasDoorKey = false
let knowsOverridePassword = true
if hasDoorKey || knowsOverridePassword {
print("Welcome!")
} else {
print("ACCESS DENIED")
}
// Prints "Welcome!"
Combining Logical Operators
You can combine multiple logical operators to create longer compound expressions:
if enteredDoorCode && passedRetinaScan || hasDoorKey || knowsOverridePassword {
print("Welcome!")
} else {
print("ACCESS DENIED")
}
// Prints "Welcome!"
Explicit Parentheses
It is sometimes useful to include parentheses when they are not strictly needed, to make the intention of a complex expression easier to read. In the door access example above, it is useful to add parentheses around the first part of the compound expression to make its intent explicit:
if (enteredDoorCode && passedRetinaScan) || hasDoorKey || knowsOverridePassword {
print("Welcome!")
} else {
print("ACCESS DENIED")
}
// Prints "Welcome!"