Android M版本中gpio几种常见设定的pinctrl配置

Android M版本中gpio几种常见设定的pinctrl配置

[DESCRIPTION]

pinctrl的配置file是.dts
备注：配置是以mt6735上gpio84举例的
1.配置成输入上拉
&pio {
test_pull_up: test_pull_up {
pins_cmd_dat {
pins = ;
slew-rate = <0>;
bias-pull-up = <00>;
};
};
};
2.配置成输入下拉
&pio {
test_pull_down: test_pull_down {
pins_cmd_dat {
pins = ;
slew-rate = <0>;
bias-pull-down = <00>;
};
};
};
3.配置成输入pull disable
&pio {
test_pull_none: test_pull_none {
pins_cmd_dat {
pins = ;
slew-rate = <0>;
bias-disable;
};
};
};
4.配置成输出high
&pio {
test_out_high: test_out_high {
pins_cmd_dat {
pins = ;
slew-rate = <1>;
bias-disable;
output-high;
};
};
};
5.配置成输出low
&pio {
test_out_low: test_out_low {
pins_cmd_dat {
pins = ;
slew-rate = <1>;
bias-disable;
output-low;
};
};
};
6.配置成特定的mode
&pio {
test_mode: test_mode {
pins_cmd_dat {
pins = ;
};
};
};
关于更多的gpio使用，请参考DCC网站上的文档：Gpio_Usage_Guide_For_Android_M