SFUD 使用示例

准备

潘多拉，打开板载 spi flash

示例代码

简单的进行测试：

#include 
#include 
#include 
#include 

int main(void)
{
    sfud_err result;
    uint8_t *read_data;//读取到的数据
    uint8_t *write_data;//将要写入的数据
    sfud_flash *sfud_dev = NULL;

#if 0      // 法1：获取 sfud_dev
    sfud_dev = rt_sfud_flash_find_by_dev_name("W25Q128");
    if (sfud_dev != RT_NULL)
    {
        rt_kprintf("Find sfud_dev success, sfud_dev name = %s\n", sfud_dev->name);
    }
#else      // 法2：获取 sfud_dev
    sfud_dev = rt_sfud_flash_find("qspi10");
    if (sfud_dev != RT_NULL)
    {
        rt_kprintf("Find sfud_dev success, sfud_dev name = %s\n", sfud_dev->name);
    }
#endif

    /* 擦除从 0 开始的 4096 字节 */
    result = sfud_erase(sfud_dev, 0, 4096);
    if (result == SFUD_SUCCESS)
    {
        rt_kprintf("Erase success\n");
    }

    /* 写入从 0 开始的 32 字节, 0x01 */
    write_data = rt_malloc(32);
    rt_memset(write_data, 1, 32);
    result = sfud_write(sfud_dev, 0, 32, write_data);
    if (result == SFUD_SUCCESS)
    {
        rt_kprintf("Write success.\n");
    }

    /* 读取从0开始的32字节 */
    read_data = rt_malloc(32);
    result = sfud_read(sfud_dev, 0, 32, read_data);
    if (result == SFUD_SUCCESS)
    {
        rt_kprintf("Read success.\n ");
    }

    return RT_EOK;
}

结果

 \ | /
- RT -     Thread Operating System
 / | \     4.0.3 build Apr 27 2020
 2006 - 2020 Copyright by rt-thread team
[D/drv.qspi] qspi init success!
[SFUD] Find a Winbond flash chip. Size is 16777216 bytes.
[SFUD] W25Q128 flash device is initialize success.
[D/drv.qspi] qspi init success!
Find sfud_dev success, sfud_dev name = W25Q128
msh >Erase success
Write success.
Read success.