Red Hat RH-302 Exam

• Exam Number/Code : RH-302
• Exam Name : Red Hat Certified Engineer on Redhat Enterprise Linux 4 (Labs)
• Questions and Answers : 330 Q&As
• Update Time: 2010-05-16

 

1. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

2. Use the passwd command
2. Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is 172.24.254.254
Answer and Explanation:

3. Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:

4. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

5. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

6. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

7. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

8. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

9. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

10. Type the Size: +100M-> You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

11. Change the root Password to redtophat
Answer and Explanation:

12. You are giving RHCT Exam and in your Exam paper there is a written, make successfully ping to 192.168.0.254.
Answer and Explanation:

13. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

14. The System you are using is for NFS (Network File Services). Some important data are shared from your system.
Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:

15. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

16. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

17. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

18. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

19. Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:

20. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M-> You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:

RH-302 Braindumps
RH-302 Red Hat Certified Engineer on Redhat Enterprise Linux 4 (Labs)
RH-202 Redhat Certified Technician on Redhat Enterprise Linux 4 (Labs)