ubuntu安装postfix+esmtp验证配置

https://help.ubuntu.com/community/Postfix

 

Community Documentation

• Login to Edit

Ubuntu Documentation > Community Documentation > Postfix

• Postfix

Introduction

目录

1. Introduction
2. What is a Mail Transfer Agent
3. Installation
4. Configuration
5. Authentication
6. Testing
7. Troubleshooting
   1. Remove Postfix from chroot
   2. Configuring saslauthd to Default
8. Using Port 587 for Secure Submission
9. Other Postfix Guides
   1. Postfix Basic Setup
   2. Postfix Virtual Mailbox and Antivirus Filtering
   3. Postfix Setup For Sender Policy Framework (SPF) Checking
   4. Postfix Setup For DKIM email signing and verification
   5. Add Dspam to Postfix
   6. Postfix Complete Solution
   7. Dovecot LDAP
   8. Dovecot SASL

Postfix is the default Mail Transfer Agent (MTA) for Ubuntu. It is in Ubuntu's main repository, which means that it receives security updates. This guide explains how to install and configure postfix and set it up as an SMTP server using a secure connection.

What is a Mail Transfer Agent

In other words, it's a mail server not a mail client like Thunderbird, Evolution, Outlook, Eudora, or a web-based email service like Yahoo, GMail, Hotmail, Earthlink, Comcast, SBCGlobal.net, ATT.net etc.... If you worked for a company named Acme and owned acme.com, you could provide your employees with email addresses @acme.com. Employees could send an receive email through your computer, but not without your computer running all the time. If all your email addresses are at a domain (@gmail.com, @yahoo.com) you do not own (you don't own Google) or do not host (acme.com) then you do not need this at all.

Installation

In order to install Postfix with SMTP-AUTH and TLS, first install the postfix package from the Main repository using your favorite package manager. For example:

sudo aptitude install postfix

Simply accept the defaults when the installation process asks questions. The configuration will be done in greater detail in the next stage.

Configuration

From a terminal prompt:

sudo dpkg-reconfigure postfix

Insert the following details when asked (replacing server1.example.com with your domain name if you have one):

• General type of mail configuration: Internet Site

• NONE doesn't appear to be requested in current config

• System mail name: server1.example.com

• Root and postmaster mail recipient:

• Other destinations for mail: server1.example.com, example.com, localhost.example.com, localhost

• Force synchronous updates on mail queue?: No

• Local networks: 127.0.0.0/8

• Yes doesn't appear to be requested in current config

• Mailbox size limit (bytes): 0

• Local address extension character: +

• Internet protocols to use: all

Now is a good time to decide which mailbox format you want to use. By default Postifx will use mbox for the mailbox format. Rather than editing the configuration file directly, you can use the postconf command to configure all postfix parameters. The configuration parameters will be stored in /etc/postfix/main.cf file. Later if you wish to re-configure a particular parameter, you can either run the command or change it manually in the file.

To configure the mailbox format for Maildir:

sudo postconf -e 'home_mailbox = Maildir/'

You may need to issue this as well:

sudo postconf -e 'mailbox_command ='

Note: This will place new mail in /home/username/Maildir so you will need to configure your Mail Delivery Agent to use the same path.

Configure Postfix to do SMTP AUTH using SASL (saslauthd):

sudo postconf -e 'smtpd_sasl_local_domain ='sudo postconf -e 'smtpd_sasl_auth_enable = yes'sudo postconf -e 'smtpd_sasl_security_options = noanonymous'sudo postconf -e 'broken_sasl_auth_clients = yes'sudo postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination'sudo postconf -e 'inet_interfaces = all'

Next edit /etc/postfix/sasl/smtpd.conf and add the following lines:

pwcheck_method: saslauthdmech_list: plain login

Generate certificates to be used for TLS encryption and/or certificate Authentication:

touch smtpd.keychmod 600 smtpd.keyopenssl genrsa 1024 > smtpd.keyopenssl req -new -key smtpd.key -x509 -days 3650 -out smtpd.crt # has promptsopenssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650 # has promptssudo mv smtpd.key /etc/ssl/private/sudo mv smtpd.crt /etc/ssl/certs/sudo mv cakey.pem /etc/ssl/private/sudo mv cacert.pem /etc/ssl/certs/

Configure Postfix to do TLS encryption for both incoming and outgoing mail:

sudo postconf -e 'smtp_tls_security_level = may'sudo postconf -e 'smtpd_tls_security_level = may'sudo postconf -e 'smtpd_tls_auth_only = no'sudo postconf -e 'smtp_tls_note_starttls_offer = yes'sudo postconf -e 'smtpd_tls_key_file = /etc/ssl/private/smtpd.key'sudo postconf -e 'smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt'sudo postconf -e 'smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem'sudo postconf -e 'smtpd_tls_loglevel = 1'sudo postconf -e 'smtpd_tls_received_header = yes'sudo postconf -e 'smtpd_tls_session_cache_timeout = 3600s'sudo postconf -e 'tls_random_source = dev:/dev/urandom'sudo postconf -e 'myhostname = server1.example.com' # remember to change this to yours

The file /etc/postfix/main.cf should now look like this:

# See /usr/share/postfix/main.cf.dist for a commented, more complete versionsmtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)biff = no# appending .domain is the MUA's job.append_dot_mydomain = no# Uncomment the next line to generate "delayed mail" warnings#delay_warning_time = 4hmyhostname = server1.example.comalias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliasesmyorigin = /etc/mailnamemydestination = server1.example.com, example.com, localhost.example.com, localhostrelayhost =mynetworks = 127.0.0.0/8mailbox_command = procmail -a "$EXTENSION"mailbox_size_limit = 0recipient_delimiter = +inet_interfaces = allsmtpd_sasl_local_domain =smtpd_sasl_auth_enable = yessmtpd_sasl_security_options = noanonymousbroken_sasl_auth_clients = yessmtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destinationsmtpd_tls_auth_only = no#Use these on Postfix 2.2.x only#smtp_use_tls = yes#smtpd_use_tls = yes#For Postfix 2.3 or above use:smtp_tls_security_level = maysmtpd_tls_security_level = maysmtp_tls_note_starttls_offer = yessmtpd_tls_key_file = /etc/ssl/private/smtpd.keysmtpd_tls_cert_file = /etc/ssl/certs/smtpd.crtsmtpd_tls_CAfile = /etc/ssl/certs/cacert.pemsmtpd_tls_loglevel = 1smtpd_tls_received_header = yessmtpd_tls_session_cache_timeout = 3600stls_random_source = dev:/dev/urandom

Restart the postfix daemon like this:

sudo /etc/init.d/postfix restartAuthentication

The next steps are to configure Postfix to use SASL for SMTP AUTH.

First you will need to install the libsasl2-2, sasl2-bin and libsasl2-modules from the Main repository [i.e. sudo apt-get install them all].

Note: if you are using Ubuntu 6.06 (Dapper Drake) the package name is libsasl2.

We have to change a few things to make it work properly. Because Postfix runs chrooted in /var/spool/postfix we have change a couple paths to live in the false root. (ie. /var/run/saslauthd becomes /var/spool/postfix/var/run/saslauthd):

Note: by changing the saslauthd path other applications that use saslauthd may be affected.

First we edit /etc/default/saslauthd in order to activate saslauthd. Remove # in front of START=yes, add the PWDIR, PARAMS, and PIDFILE lines and edit the OPTIONS line at the end:

# This needs to be uncommented before saslauthd will be run automaticallySTART=yesPWDIR="/var/spool/postfix/var/run/saslauthd"PARAMS="-m ${PWDIR}"PIDFILE="${PWDIR}/saslauthd.pid"# You must specify the authentication mechanisms you wish to use.# This defaults to "pam" for PAM support, but may also include# "shadow" or "sasldb", like this:# MECHANISMS="pam shadow"MECHANISMS="pam"# Other options (default: -c)# See the saslauthd man page for information about these options.## Example for postfix users: "-c -m /var/spool/postfix/var/run/saslauthd"# Note: See /usr/share/doc/sasl2-bin/README.Debian#OPTIONS="-c"#make sure you set the options here otherwise it ignores params above and will not workOPTIONS="-c -m /var/spool/postfix/var/run/saslauthd"

Note: If you prefer, you can use "shadow" instead of "pam". This will use MD5 hashed password transfer and is perfectly secure. The username and password needed to authenticate will be those of the users on the system you are using on the server.

Next, we update the dpkg "state" of /var/spool/postfix/var/run/saslauthd. The saslauthd init script uses this setting to create the missing directory with the appropriate permissions and ownership:

dpkg-statoverride --force --update --add root sasl 755 /var/spool/postfix/var/run/saslauthd

This may report an error that "--update given" and the "/var/spool/postfix/var/run/saslauthd" directory does not exist. You can ignore this because when you start saslauthd next it will be created.

Finally, start saslauthd:

sudo /etc/init.d/saslauthd startTesting

To see if SMTP-AUTH and TLS work properly now run the following command:

telnet localhost 25

After you have established the connection to your postfix mail server type

ehlo localhost

If you see the lines

250-STARTTLS250-AUTH

among others, everything is working.

Type quit to return to the system's shell.

TroubleshootingRemove Postfix from chroot

If you run into issues while running Postfix you may be asked to remove Postfix from chroot to better diagnose the problem. In order to do that you will need to edit /etc/postfix/master.cf locate the following line:

smtp inet n - - - - smtpd

and modify it as follows:

smtp inet n - n - - smtpd

Then restart Postfix:

sudo /etc/init.d/postfix restartConfiguring saslauthd to Default

If you don't want to run Postfix in a chroot, or you'd like to not use chroot for troubleshooting purposes you will probably also want to return saslauthd back to its default configuration.

The first step in accomplishing this is to edit /etc/default/saslauthd comment the following lines we added above:

#PWDIR="/var/spool/postfix/var/run/saslauthd"#PARAMS="-m ${PWDIR}"#PIDFILE="${PWDIR}/saslauthd.pid"

Then return the saslauthd dpkg "state" to its default location:

dpkg-statoverride --force --update --add root sasl 755 /var/run/saslauthd

And restart saslauthd:

sudo /etc/init.d/saslauthd restartUsing Port 587 for Secure Submission

If you want to use port 587 as the submission port for SMTP mail rather than 25 (many ISPs block port 25), you will need to edit /etc/postfix/master.cf and uncomment the line

submission inet n - n - - smtpdOther Postfix Guides

These guides will teach you how to setup Postfix mail servers, from basic to advanced.

Postfix Basic Setup

Postfix Basic Setup Howto will teach you the concepts of Posfix and how you can get Postfix basics set up and running. If you are new to Postfix it is recomended to follow this guide first.

Postfix Virtual Mailbox and Antivirus Filtering

Postfix Virtual MailBox ClamSmtp Howto will teach you how to setup virtual mailboxes using non-Linux accounts where each user will authenticate using their email address with Dovecot POP3/IMAP server and ClamSMTP Antivirus to filter both incoming and out going mails for known viruses.

Postfix Setup For Sender Policy Framework (SPF) Checking

Postfix SPF will show you how to add SPF checking to your existing Postfix setup. This allows your server to reject mail from unauthorized sources.

Postfix Setup For DKIM email signing and verification

Postfix DKIM will guide you through the setup process of dkim-milter for you existing Postfix installation. This will allow your server to sign and verify emails using DKIM.

Add Dspam to Postfix

Postfix Dspam will guide you through the setup process of dspam for you existing Postfix installation. This will enable on your mail server high quality statistical spam filter Dspam.

Postfix Complete Solution

Postfix Complete Virtual Mail System Howto will help you if you are managing a large number of virtual domains at an ISP level or in a large corporation where you mange few hundred or thousand mail domains. This guide is appropriate if you are looking a complete solution with:

• Web based system administration
• Unlimited number of domains
• Virtual mail users without the need for shell accounts
• Domain specific user names
• Mailbox quotas
• Web access to email accounts
• Web based interface to change user passwords
• IMAP and POP3 support
• Auto responders
• SMTP Authentication for secure relaying
• SSL for transport layer security
• Strong spam filtering
• Anti-virus filtering
• Log Analysis

Dovecot LDAP

The Postfix/DovecotLDAP guide will help you configure Postfix to use Dovecot as MDA with LDAP users.

Dovecot SASL

The PostfixDovecotSASL guide will help you configure Postfix to use Dovecot's SASL implementation. Using Dovecot SASL may be preferable if you want to run Postfix in a chroot and need to use Cyrus SASL for other services.

Note: this guide has been tested on Ubuntu 6.06 (Dapper) and Ubuntu 7.10 (Gutsy)

---

CategoryEmail

Postfix (2012-02-19 00:43:41由christian-blackburn编辑)

• Page History

---

The material on this wiki is available under a free license, see Copyright / License for details
You can contribute to this wiki, see Wiki Guide for details

--------------------------------

增加smtp验证用户时像加linux用户一样(使用的是shadow库来验证)

然后记得使用passwd设置一下密码

测试

------

smtp使用演示
运行 windows的cmd窗口
按以下步骤使用命令
smtp的信息
用户名:p
域名:r.chinahrd.net
提示:不能收信,只发
密码:kdjfkkdie*&^(^e.{][
密码base64后:a2RqZmtrZGDQ0MyM2amRqamUue11b
用户名base64后:cGdA==
VXNlcm5hbWU6经过base64解码后:Username:
UGFzc3dvcmQ6经过base64解码后:Password:
data中的内容请按标准输入,现只做是否成功演示,忽略收信后内容
auth login:smtp的登录命令
mail from:发件人命令
rcpt to:收件人命令
data:输入内容
.+回车:表示输入内容结束
quit退出smtp
ehlo chinahrd.net:出示身份
--------cmd中输入开始---------
telnet 219.22.28.530 25
ehlo chinahrd.net
auth login
czdA==
a2RqZmDQ0MyM2amRqamUue11b
mail from:[email protected]
rcpt to:[email protected]
data
subject:cWlkaXpp
kkkkk
.
quit
---cmd输入结束----