【SQL Profile】coe_xfr_sql_profile.sql内容

【SQL Profile】coe_xfr_sql_profile.sql内容

---

---

点击(此处)折叠或打开

 SPO coe_xfr_sql_profile.log;
 SET DEF ON TERM OFF ECHO ON FEED OFF VER OFF HEA ON LIN 2000 PAGES 100 LONG 8000000 LONGC 800000 TRIMS ON TI OFF TIMI OFF SERVEROUT ON SIZE 1000000 NUMF "" SQLP SQL>;
 SET SERVEROUT ON SIZE UNL;
 REM
 REM $Header: 215187.1 coe_xfr_sql_profile.sql 11.4.5.5 2013/03/01 carlos.sierra $
 REM
 REM Copyright (c) 2000-2013, Oracle Corporation. All rights reserved.
 REM
 REM AUTHOR
 REM carlos.sierra@oracle.com
 REM
 REM SCRIPT
 REM coe_xfr_sql_profile.sql
 REM
 REM DESCRIPTION
 REM This script generates another that contains the commands to
 REM create a manual custom SQL Profile out of a known plan from
 REM memory or AWR. The manual custom profile can be implemented
 REM into the same SOURCE system where the plan was retrieved,
 REM or into another similar TARGET system that has same schema
 REM objects referenced by the SQL that generated the known plan.
 REM
 REM PRE-REQUISITES
 REM 1. Oracle Tuning Pack license.
 REM
 REM PARAMETERS
 REM 1. SQL_ID (required)
 REM 2. Plan Hash Value for which a manual custom SQL Profile is
 REM needed (required). A list of known plans is presented.
 REM You may choose from list provided or enter a valid phv
 REM from a version of the SQL modified with Hints.
 REM
 REM EXECUTION
 REM 1. Connect into SQL*Plus as user with access to data dictionary.
 REM Do not use SYS.
 REM 2. Execute script coe_xfr_sql_profile.sql passing SQL_ID and
 REM plan hash value (parameters can be passed inline or until
 REM requested).
 REM
 REM EXAMPLE
 REM # sqlplus system
 REM SQL> START coe_xfr_sql_profile.sql [SQL_ID] [PLAN_HASH_VALUE];
 REM SQL> START coe_xfr_sql_profile.sql gnjy0mn4y9pbm 2055843663;
 REM SQL> START coe_xfr_sql_profile.sql gnjy0mn4y9pbm;
 REM SQL> START coe_xfr_sql_profile.sql;
 REM
 REM NOTES
 REM 1. For possible errors see coe_xfr_sql_profile.log
 REM 2. If SQLT is installed in SOURCE, you can use instead:
 REM sqlt/utl/sqltprofile.sql
 REM 3. Be aware that using DBMS_SQLTUNE requires a license for
 REM Oracle Tuning Pack.
 REM 4. Use a DBA user but not SYS.
 REM 5. If you get "ORA-06532: Subscript outside of limit, ORA-06512: at line 1"
 REM Then you may consider this change (only in a test and disposable system):
 REM create or replace TYPE sys.sqlprof_attr AS VARRAY(5000) of VARCHAR2(500);
 REM
 SET TERM ON ECHO OFF;
 PRO
 PRO Parameter 1:
 PRO SQL_ID (required)
 PRO
 DEF sql_id = '&1';
 PRO
 WITH
 p AS (
 SELECT plan_hash_value
   FROM gv$sql_plan
  WHERE sql_id = TRIM('&&sql_id.')
    AND other_xml IS NOT NULL
  UNION
 SELECT plan_hash_value
   FROM dba_hist_sql_plan
  WHERE sql_id = TRIM('&&sql_id.')
    AND other_xml IS NOT NULL ),
 m AS (
 SELECT plan_hash_value,
        SUM(elapsed_time)/SUM(executions) avg_et_secs
   FROM gv$sql
  WHERE sql_id = TRIM('&&sql_id.')
    AND executions > 0
  GROUP BY
        plan_hash_value ),
 a AS (
 SELECT plan_hash_value,
        SUM(elapsed_time_total)/SUM(executions_total) avg_et_secs
   FROM dba_hist_sqlstat
  WHERE sql_id = TRIM('&&sql_id.')
    AND executions_total > 0
  GROUP BY
        plan_hash_value )
 SELECT p.plan_hash_value,
        ROUND(NVL(m.avg_et_secs, a.avg_et_secs)/1e6, 3) avg_et_secs
   FROM p, m, a
  WHERE p.plan_hash_value = m.plan_hash_value(+)
    AND p.plan_hash_value = a.plan_hash_value(+)
  ORDER BY
        avg_et_secs NULLS LAST;
 PRO
 PRO Parameter 2:
 PRO PLAN_HASH_VALUE (required)
 PRO
 DEF plan_hash_value = '&2';
 PRO
 PRO Values passed to coe_xfr_sql_profile:
 PRO ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 PRO SQL_ID : "&&sql_id."
 PRO PLAN_HASH_VALUE: "&&plan_hash_value."
 PRO
 SET TERM OFF ECHO ON;
 WHENEVER SQLERROR EXIT SQL.SQLCODE;

 -- trim parameters
 COL sql_id NEW_V sql_id FOR A30;
 COL plan_hash_value NEW_V plan_hash_value FOR A30;
 SELECT TRIM('&&sql_id.') sql_id, TRIM('&&plan_hash_value.') plan_hash_value FROM DUAL;

 VAR sql_text CLOB;
 VAR sql_text2 CLOB;
 VAR other_xml CLOB;
 EXEC :sql_text := NULL;
 EXEC :sql_text2 := NULL;
 EXEC :other_xml := NULL;

 -- get sql_text from memory
 DECLARE
   l_sql_text VARCHAR2(32767);
 BEGIN -- 10g see bug 5017909
   FOR i IN (SELECT DISTINCT piece, sql_text
               FROM gv$sqltext_with_newlines
              WHERE sql_id = TRIM('&&sql_id.')
              ORDER BY 1, 2)
   LOOP
     IF :sql_text IS NULL THEN
       DBMS_LOB.CREATETEMPORARY(:sql_text, TRUE);
       DBMS_LOB.OPEN(:sql_text, DBMS_LOB.LOB_READWRITE);
     END IF;
     -- removes NUL characters
     l_sql_text := REPLACE(i.sql_text, CHR(00), ' ');
     -- adds a NUL character at the end of each line
     DBMS_LOB.WRITEAPPEND(:sql_text, LENGTH(l_sql_text) + 1, l_sql_text||CHR(00));
   END LOOP;
   -- if found in memory then sql_text is not null
   IF :sql_text IS NOT NULL THEN
     DBMS_LOB.CLOSE(:sql_text);
   END IF;
 EXCEPTION
   WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('getting sql_text from memory: '||SQLERRM);
     :sql_text := NULL;
 END;
 /

 SELECT :sql_text FROM DUAL;

 -- get sql_text from awr
 DECLARE
   l_sql_text VARCHAR2(32767);
   l_clob_size NUMBER;
   l_offset NUMBER;
 BEGIN
   IF :sql_text IS NULL OR NVL(DBMS_LOB.GETLENGTH(:sql_text), 0) = 0 THEN
     SELECT sql_text
       INTO :sql_text2
       FROM dba_hist_sqltext
      WHERE sql_id = TRIM('&&sql_id.')
        AND sql_text IS NOT NULL
        AND ROWNUM = 1;
   END IF;
   -- if found in awr then sql_text2 is not null
   IF :sql_text2 IS NOT NULL THEN
     l_clob_size := NVL(DBMS_LOB.GETLENGTH(:sql_text2), 0);
     l_offset := 1;
     DBMS_LOB.CREATETEMPORARY(:sql_text, TRUE);
     DBMS_LOB.OPEN(:sql_text, DBMS_LOB.LOB_READWRITE);
     -- store in clob as 64 character pieces plus a NUL character at the end of each piece
     WHILE l_offset < l_clob_size
     LOOP
       IF l_clob_size - l_offset > 64 THEN
         l_sql_text := REPLACE(DBMS_LOB.SUBSTR(:sql_text2, 64, l_offset), CHR(00), ' ');
       ELSE -- last piece
         l_sql_text := REPLACE(DBMS_LOB.SUBSTR(:sql_text2, l_clob_size - l_offset + 1, l_offset), CHR(00), ' ');
       END IF;
       DBMS_LOB.WRITEAPPEND(:sql_text, LENGTH(l_sql_text) + 1, l_sql_text||CHR(00));
       l_offset := l_offset + 64;
     END LOOP;
     DBMS_LOB.CLOSE(:sql_text);
   END IF;
 EXCEPTION
   WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('getting sql_text from awr: '||SQLERRM);
     :sql_text := NULL;
 END;
 /

 SELECT :sql_text2 FROM DUAL;
 SELECT :sql_text FROM DUAL;

 -- validate sql_text
 SET TERM ON;
 BEGIN
   IF :sql_text IS NULL THEN
     RAISE_APPLICATION_ERROR(-20100, 'SQL_TEXT for SQL_ID &&sql_id. was not found in memory (gv$sqltext_with_newlines) or AWR (dba_hist_sqltext).');
   END IF;
 END;
 /
 SET TERM OFF;

 -- get other_xml from memory
 BEGIN
   FOR i IN (SELECT other_xml
               FROM gv$sql_plan
              WHERE sql_id = TRIM('&&sql_id.')
                AND plan_hash_value = TO_NUMBER(TRIM('&&plan_hash_value.'))
                AND other_xml IS NOT NULL
              ORDER BY
                    child_number, id)
   LOOP
     :other_xml := i.other_xml;
     EXIT; -- 1st
   END LOOP;
 EXCEPTION
   WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('getting other_xml from memory: '||SQLERRM);
     :other_xml := NULL;
 END;
 /

 -- get other_xml from awr
 BEGIN
   IF :other_xml IS NULL OR NVL(DBMS_LOB.GETLENGTH(:other_xml), 0) = 0 THEN
     FOR i IN (SELECT other_xml
                 FROM dba_hist_sql_plan
                WHERE sql_id = TRIM('&&sql_id.')
                  AND plan_hash_value = TO_NUMBER(TRIM('&&plan_hash_value.'))
                  AND other_xml IS NOT NULL
                ORDER BY
                      id)
     LOOP
       :other_xml := i.other_xml;
       EXIT; -- 1st
     END LOOP;
   END IF;
 EXCEPTION
   WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('getting other_xml from awr: '||SQLERRM);
     :other_xml := NULL;
 END;
 /

 -- get other_xml from memory from modified SQL
 BEGIN
   IF :other_xml IS NULL OR NVL(DBMS_LOB.GETLENGTH(:other_xml), 0) = 0 THEN
     FOR i IN (SELECT other_xml
                 FROM gv$sql_plan
                WHERE plan_hash_value = TO_NUMBER(TRIM('&&plan_hash_value.'))
                  AND other_xml IS NOT NULL
                ORDER BY
                      child_number, id)
     LOOP
       :other_xml := i.other_xml;
       EXIT; -- 1st
     END LOOP;
   END IF;
 EXCEPTION
   WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('getting other_xml from memory: '||SQLERRM);
     :other_xml := NULL;
 END;
 /

 -- get other_xml from awr from modified SQL
 BEGIN
   IF :other_xml IS NULL OR NVL(DBMS_LOB.GETLENGTH(:other_xml), 0) = 0 THEN
     FOR i IN (SELECT other_xml
                 FROM dba_hist_sql_plan
                WHERE plan_hash_value = TO_NUMBER(TRIM('&&plan_hash_value.'))
                  AND other_xml IS NOT NULL
                ORDER BY
                      id)
     LOOP
       :other_xml := i.other_xml;
       EXIT; -- 1st
     END LOOP;
   END IF;
 EXCEPTION
   WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('getting other_xml from awr: '||SQLERRM);
     :other_xml := NULL;
 END;
 /

 SELECT :other_xml FROM DUAL;

 -- validate other_xml
 SET TERM ON;
 BEGIN
   IF :other_xml IS NULL THEN
     RAISE_APPLICATION_ERROR(-20101, 'PLAN for SQL_ID &&sql_id. and PHV &&plan_hash_value. was not found in memory (gv$sql_plan) or AWR (dba_hist_sql_plan).');
   END IF;
 END;
 /
 SET TERM OFF;

 -- generates script that creates sql profile in target system:
 SET ECHO OFF;
 PRO coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql.
 SET FEED OFF LIN 666 TRIMS ON TI OFF TIMI OFF SERVEROUT ON SIZE 1000000 FOR WOR;
 SET SERVEROUT ON SIZE UNL FOR WOR;
 SPO OFF;
 SPO coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql;
 DECLARE
   l_pos NUMBER;
   l_clob_size NUMBER;
   l_offset NUMBER;
   l_sql_text VARCHAR2(32767);
   l_len NUMBER;
   l_hint VARCHAR2(32767);
 BEGIN
   DBMS_OUTPUT.PUT_LINE('SPO coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..log;');
   DBMS_OUTPUT.PUT_LINE('SET ECHO ON TERM ON LIN 2000 TRIMS ON NUMF 99999999999999999999;');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM $Header: 215187.1 coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql 11.4.4.4 '||TO_CHAR(SYSDATE, 'YYYY/MM/DD')||' carlos.sierra $');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM Copyright (c) 2000-2012, Oracle Corporation. All rights reserved.');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM AUTHOR');
   DBMS_OUTPUT.PUT_LINE('REM [email protected]');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM SCRIPT');
   DBMS_OUTPUT.PUT_LINE('REM coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM DESCRIPTION');
   DBMS_OUTPUT.PUT_LINE('REM This script is generated by coe_xfr_sql_profile.sql');
   DBMS_OUTPUT.PUT_LINE('REM It contains the SQL*Plus commands to create a custom');
   DBMS_OUTPUT.PUT_LINE('REM SQL Profile for SQL_ID &&sql_id. based on plan hash');
   DBMS_OUTPUT.PUT_LINE('REM value &&plan_hash_value..');
   DBMS_OUTPUT.PUT_LINE('REM The custom SQL Profile to be created by this script');
   DBMS_OUTPUT.PUT_LINE('REM will affect plans for SQL commands with signature');
   DBMS_OUTPUT.PUT_LINE('REM matching the one for SQL Text below.');
   DBMS_OUTPUT.PUT_LINE('REM Review SQL Text and adjust accordingly.');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM PARAMETERS');
   DBMS_OUTPUT.PUT_LINE('REM None.');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM EXAMPLE');
   DBMS_OUTPUT.PUT_LINE('REM SQL> START coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql;');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('REM NOTES');
   DBMS_OUTPUT.PUT_LINE('REM 1. Should be run as SYSTEM or SYSDBA.');
   DBMS_OUTPUT.PUT_LINE('REM 2. User must have CREATE ANY SQL PROFILE privilege.');
   DBMS_OUTPUT.PUT_LINE('REM 3. SOURCE and TARGET systems can be the same or similar.');
   DBMS_OUTPUT.PUT_LINE('REM 4. To drop this custom SQL Profile after it has been created:');
   DBMS_OUTPUT.PUT_LINE('REM EXEC DBMS_SQLTUNE.DROP_SQL_PROFILE(''coe_&&sql_id._&&plan_hash_value.'');');
   DBMS_OUTPUT.PUT_LINE('REM 5. Be aware that using DBMS_SQLTUNE requires a license');
   DBMS_OUTPUT.PUT_LINE('REM for the Oracle Tuning Pack.');
   DBMS_OUTPUT.PUT_LINE('REM 6. If you modified a SQL putting Hints in order to produce a desired');
   DBMS_OUTPUT.PUT_LINE('REM Plan, you can remove the artifical Hints from SQL Text pieces below.');
   DBMS_OUTPUT.PUT_LINE('REM By doing so you can create a custom SQL Profile for the original');
   DBMS_OUTPUT.PUT_LINE('REM SQL but with the Plan captured from the modified SQL (with Hints).');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('WHENEVER SQLERROR EXIT SQL.SQLCODE;');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('VAR signature NUMBER;');
   DBMS_OUTPUT.PUT_LINE('VAR signaturef NUMBER;');
   DBMS_OUTPUT.PUT_LINE('REM');
   DBMS_OUTPUT.PUT_LINE('DECLARE');
   DBMS_OUTPUT.PUT_LINE('sql_txt CLOB;');
   DBMS_OUTPUT.PUT_LINE('h SYS.SQLPROF_ATTR;');
   DBMS_OUTPUT.PUT_LINE('PROCEDURE wa (p_line IN VARCHAR2) IS');
   DBMS_OUTPUT.PUT_LINE('BEGIN');
   DBMS_OUTPUT.PUT_LINE('DBMS_LOB.WRITEAPPEND(sql_txt, LENGTH(p_line), p_line);');
   DBMS_OUTPUT.PUT_LINE('END wa;');
   DBMS_OUTPUT.PUT_LINE('BEGIN');
   DBMS_OUTPUT.PUT_LINE('DBMS_LOB.CREATETEMPORARY(sql_txt, TRUE);');
   DBMS_OUTPUT.PUT_LINE('DBMS_LOB.OPEN(sql_txt, DBMS_LOB.LOB_READWRITE);');
   DBMS_OUTPUT.PUT_LINE('-- SQL Text pieces below do not have to be of same length.');
   DBMS_OUTPUT.PUT_LINE('-- So if you edit SQL Text (i.e. removing temporary Hints),');
   DBMS_OUTPUT.PUT_LINE('-- there is no need to edit or re-align unmodified pieces.');
   l_clob_size := NVL(DBMS_LOB.GETLENGTH(:sql_text), 0);
   l_offset := 1;
   WHILE l_offset < l_clob_size
   LOOP
     l_pos := DBMS_LOB.INSTR(:sql_text, CHR(00), l_offset);
     IF l_pos > 0 THEN
       l_len := l_pos - l_offset;
     ELSE -- last piece
       l_len := l_clob_size - l_pos + 1;
     END IF;
     l_sql_text := DBMS_LOB.SUBSTR(:sql_text, l_len, l_offset);
     /* cannot do such 3 replacement since a line could end with a comment using "--"
     l_sql_text := REPLACE(l_sql_text, CHR(10), ' '); -- replace LF with SP
     l_sql_text := REPLACE(l_sql_text, CHR(13), ' '); -- replace CR with SP
     l_sql_text := REPLACE(l_sql_text, CHR(09), ' '); -- replace TAB with SP
     */
     l_offset := l_offset + l_len + 1;
     IF l_len > 0 THEN
       IF INSTR(l_sql_text, '''[') + INSTR(l_sql_text, ']''') = 0 THEN
         l_sql_text := '['||l_sql_text||']';
       ELSIF INSTR(l_sql_text, '''{') + INSTR(l_sql_text, '}''') = 0 THEN
         l_sql_text := '{'||l_sql_text||'}';
       ELSIF INSTR(l_sql_text, '''<') + INSTR(l_sql_text, '>''') = 0 THEN
         l_sql_text := '<'||l_sql_text||'>';
       ELSIF INSTR(l_sql_text, '''(') + INSTR(l_sql_text, ')''') = 0 THEN
         l_sql_text := '('||l_sql_text||')';
       ELSIF INSTR(l_sql_text, '''"') + INSTR(l_sql_text, '"''') = 0 THEN
         l_sql_text := '"'||l_sql_text||'"';
       ELSIF INSTR(l_sql_text, '''|') + INSTR(l_sql_text, '|''') = 0 THEN
         l_sql_text := '|'||l_sql_text||'|';
       ELSIF INSTR(l_sql_text, '''~') + INSTR(l_sql_text, '~''') = 0 THEN
         l_sql_text := '~'||l_sql_text||'~';
       ELSIF INSTR(l_sql_text, '''^') + INSTR(l_sql_text, '^''') = 0 THEN
         l_sql_text := '^'||l_sql_text||'^';
       ELSIF INSTR(l_sql_text, '''@') + INSTR(l_sql_text, '@''') = 0 THEN
         l_sql_text := '@'||l_sql_text||'@';
       ELSIF INSTR(l_sql_text, '''#') + INSTR(l_sql_text, '#''') = 0 THEN
         l_sql_text := '#'||l_sql_text||'#';
       ELSIF INSTR(l_sql_text, '''%') + INSTR(l_sql_text, '%''') = 0 THEN
         l_sql_text := '%'||l_sql_text||'%';
       ELSIF INSTR(l_sql_text, '''$') + INSTR(l_sql_text, '$''') = 0 THEN
         l_sql_text := '$'||l_sql_text||'$';
       ELSE
         l_sql_text := CHR(96)||l_sql_text||CHR(96);
       END IF;
       DBMS_OUTPUT.PUT_LINE('wa(q'''||l_sql_text||''');');
     END IF;
   END LOOP;
   DBMS_OUTPUT.PUT_LINE('DBMS_LOB.CLOSE(sql_txt);');
   DBMS_OUTPUT.PUT_LINE('h := SYS.SQLPROF_ATTR(');
   DBMS_OUTPUT.PUT_LINE('q''[BEGIN_OUTLINE_DATA]'',');
   FOR i IN (SELECT /*+ opt_param('parallel_execution_enabled', 'false') */
                    SUBSTR(EXTRACTVALUE(VALUE(d), '/hint'), 1, 4000) hint
               FROM TABLE(XMLSEQUENCE(EXTRACT(XMLTYPE(:other_xml), '/*/outline_data/hint'))) d)
   LOOP
     l_hint := i.hint;
     WHILE NVL(LENGTH(l_hint), 0) > 0
     LOOP
       IF LENGTH(l_hint) <= 500 THEN
         DBMS_OUTPUT.PUT_LINE('q''['||l_hint||']'',');
         l_hint := NULL;
       ELSE
         l_pos := INSTR(SUBSTR(l_hint, 1, 500), ' ', -1);
         DBMS_OUTPUT.PUT_LINE('q''['||SUBSTR(l_hint, 1, l_pos)||']'',');
         l_hint := ' '||SUBSTR(l_hint, l_pos);
       END IF;
     END LOOP;
   END LOOP;
   DBMS_OUTPUT.PUT_LINE('q''[END_OUTLINE_DATA]'');');
   DBMS_OUTPUT.PUT_LINE(':signature := DBMS_SQLTUNE.SQLTEXT_TO_SIGNATURE(sql_txt);');
   DBMS_OUTPUT.PUT_LINE(':signaturef := DBMS_SQLTUNE.SQLTEXT_TO_SIGNATURE(sql_txt, TRUE);');
   DBMS_OUTPUT.PUT_LINE('DBMS_SQLTUNE.IMPORT_SQL_PROFILE (');
   DBMS_OUTPUT.PUT_LINE('sql_text => sql_txt,');
   DBMS_OUTPUT.PUT_LINE('profile => h,');
   DBMS_OUTPUT.PUT_LINE('name => ''coe_&&sql_id._&&plan_hash_value.'',');
   DBMS_OUTPUT.PUT_LINE('description => ''coe &&sql_id. &&plan_hash_value. ''||:signature||'' ''||:signaturef||'''',');
   DBMS_OUTPUT.PUT_LINE('category => ''DEFAULT'',');
   DBMS_OUTPUT.PUT_LINE('validate => TRUE,');
   DBMS_OUTPUT.PUT_LINE('replace => TRUE,');
   DBMS_OUTPUT.PUT_LINE('force_match => FALSE /* TRUE:FORCE (match even when different literals in SQL). FALSE:EXACT (similar to CURSOR_SHARING) */ );');
   DBMS_OUTPUT.PUT_LINE('DBMS_LOB.FREETEMPORARY(sql_txt);');
   DBMS_OUTPUT.PUT_LINE('END;');
   DBMS_OUTPUT.PUT_LINE('/');
   DBMS_OUTPUT.PUT_LINE('WHENEVER SQLERROR CONTINUE');
   DBMS_OUTPUT.PUT_LINE('SET ECHO OFF;');
   DBMS_OUTPUT.PUT_LINE('PRINT signature');
   DBMS_OUTPUT.PUT_LINE('PRINT signaturef');
   DBMS_OUTPUT.PUT_LINE('PRO');
   DBMS_OUTPUT.PUT_LINE('PRO ... manual custom SQL Profile has been created');
   DBMS_OUTPUT.PUT_LINE('PRO');
   DBMS_OUTPUT.PUT_LINE('SET TERM ON ECHO OFF LIN 80 TRIMS OFF NUMF "";');
   DBMS_OUTPUT.PUT_LINE('SPO OFF;');
   DBMS_OUTPUT.PUT_LINE('PRO');
   DBMS_OUTPUT.PUT_LINE('PRO COE_XFR_SQL_PROFILE_&&sql_id._&&plan_hash_value. completed');
 END;
 /
 SPO OFF;
 SET DEF ON TERM ON ECHO OFF FEED 6 VER ON HEA ON LIN 80 PAGES 14 LONG 80 LONGC 80 TRIMS OFF TI OFF TIMI OFF SERVEROUT OFF NUMF "" SQLP SQL>;
 SET SERVEROUT OFF;
 PRO
 PRO Execute coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql
 PRO on TARGET system in order to create a custom SQL Profile
 PRO with plan &&plan_hash_value linked to adjusted sql_text.
 PRO
 UNDEFINE 1 2 sql_id plan_hash_value
 CL COL
 PRO
 PRO COE_XFR_SQL_PROFILE completed.

---

---

About Me

............................................................................................................................... ● 本文作者：小麦苗，只专注于数据库的技术，更注重技术的运用 ● 本文在itpub（http://blog.itpub.net/26736162）、博客园（http://www.cnblogs.com/lhrbest）和个人微信公众号（xiaomaimiaolhr）上有同步更新 ● 本文itpub地址：http://blog.itpub.net/26736162/abstract/1/ ● 本文博客园地址：http://www.cnblogs.com/lhrbest ● 本文pdf版及小麦苗云盘地址：http://blog.itpub.net/26736162/viewspace-1624453/ ● 数据库笔试面试题库及解答：http://blog.itpub.net/26736162/viewspace-2134706/ ● QQ群：230161599     微信群：私聊 ● 联系我请加QQ好友(646634621)，注明添加缘由 ● 于 2017-06-02 09:00 ~ 2017-06-30 22:00 在魔都完成 ● 文章内容来源于小麦苗的学习笔记，部分整理自网络，若有侵权或不当之处还请谅解 ● 版权所有，欢迎分享本文，转载请保留出处 ............................................................................................................................... 拿起手机使用微信客户端扫描下边的左边图片来关注小麦苗的微信公众号：xiaomaimiaolhr，扫描右边的二维码加入小麦苗的QQ群，学习最实用的数据库技术。

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/26736162/viewspace-2141322/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/26736162/viewspace-2141322/