关于蓝牙的测试（二）_Test Suite Structure (TSS) and Test Purposes (TP)

Test Suite Structure (TSS) and Test Purposes (TP) Specification 1.2/2.0/2.0 + EDR/
2.1/2.1 + EDR/3.0/3.0 + HS/4.0
主要参考了2011年的RF.TS/4.0.2版本。

1.Test suite structure

蓝牙射频测试结构分为发射机和接收机两部分。

Test group

The test groups are organized in 3 levels. The first level defines the protocol
groups representing the protocol services. The second level, separates the
protocol services in functional modules. The last level in each branch contains
the standard ISO subgroups BV and BI
测试被定义为3个层级。第一层级为协议组。第二层级按照功能模块进行区分。

1.1 Protocol groups

The protocol group identifies the kind of test for Bluetooth RF test purposes:
• Transmitter
• Transceiver
• Receiver
协议组，根据蓝牙射频测试目的区分了不同的测试种类。

1.2 Main test group

The main test groups are the capability group, the valid behavior group and the
invalid behavior group.

1.2.1 Capability (CA) tests

This sub group provides testing of the major EUT capabilities aiming to insure
that the claimed capabilities are correctly supported, according to the ICS.

1.2.2 Valid Behavior (BV) tests

This sub group provides testing to verify that the EUT reacts in conformity with
the Bluetooth standard, after receipt or exchange of a valid Protocol Data Units
(PDUs). Valid PDUs means that the exchange of messages and the content of
the exchanged messages are considered as valid.

1.2.3 Invalid Behavior (BI) tests

This sub group provides testing to verify that the EUT reacts in conformity with
the Bluetooth standard, after receipt of a syntactically or semantically invalid
PDU.

2.Test purpose(TP)