1.准备
1.1系统配置
在安装之前，需要先做如下准备。三台CentOS主机如下：
配置yum源(使用腾讯云的)
替换之前先备份旧配置
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
centos各版本的源配置列表
centos5
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.cloud.tencent.com/repo/centos5_base.repo
centos6
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.cloud.tencent.com/repo/centos6_base.repo
centos7
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.cloud.tencent.com/repo/centos7_base.repo
更新缓存
yum clean all
yum makecache
cat /etc/hosts
192.168.233.251 k8sMaster
192.168.233.170 k8sNode1
192.168.233.35 k8sNode2
关闭swap：
临时关闭
swapoff -a
永久关闭(删除或注释掉swap那一行重启即可)
vim /etc/fstab
关闭所有防火墙
systemctl stop firewalld
systemctl disable firewalld
禁用SELINUX：
setenforce 0
vi /etc/selinux/config
SELINUX=disabled
将桥接的IPv4流量传递到iptables的链：
cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
使设置生效
sysctl --system 或 modprobe br_netfilter && sysctl -p /etc/sysctl.d/k8s.conf
1.2kube-proxy开启ipvs的前置条件
由于ipvs已经加入到了内核的主干，所以为kube-proxy开启ipvs的前提需要加载以下的内核模块：
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4
在所有的Kubernetes节点node1和node2上执行以下脚本:
cat > /etc/sysconfig/modules/ipvs.modules <脚本创建了的/etc/sysconfig/modules/ipvs.modules文件，保证在节点重启后能自动加载所需模块。 使用lsmod | grep -e ip_vs -e nf_conntrack_ipv4命令查看是否已经正确加载所需的内核模块。
在所有节点上安装ipset软件包
yum install ipset -y
为了方便查看ipvs规则我们要安装ipvsadm(可选)
yum install ipvsadm -y
1.3安装Docker(所有节点)
Kubernetes默认CRI（容器运行时）为Docker，因此先安装Docker。
Docker/kubeadm/kubelet
配置docker国内源(阿里云)
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
**注意如果需要安装指定版本的docker-ce,请参考下面命令
指定docker-ce版本安装[可选]
查询18.09版的docker-ce 并安装
yum list available docker-ce* --showduplicates|grep 18.09
docker-ce.x86_64 3:18.09.0-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.1-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.2-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.3-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.4-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.5-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.6-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.7-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.8-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.0-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.1-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.2-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.3-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.4-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.5-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.6-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.7-3.el7 docker-ce-stable
docker-ce-cli.x86_64 1:18.09.8-3.el7 docker-ce-stable
yum install -y docker-ce-18.09.8-3.el7
systemctl enable docker && systemctl start docker
docker --version
最新版docker-ce安装
yum -y install docker-ce
systemctl enable docker && systemctl start docker
docker --version
bubernetes的源(阿里云)
cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
手动导入gpgkey或者关闭 gpgcheck=0
rpmkeys --import https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
rpmkeys --import https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
开始安装kubeadm和kubelet：
yum install -y kubelet kubeadm kubectl
systemctl enable kubelet
开始部署Kubernetes
初始化master
kubeadm init \
--apiserver-advertise-address=192.168.233.251\
--image-repository registry.aliyuncs.com/google_containers \
--kubernetes-version v1.14.2 \
--pod-network-cidr=10.244.0.0/16
关注输出内容
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.233.251:6443 --token a9vg9z.dlboqvfuwwzauufq \
--discovery-token-ca-cert-hash sha256:c2ade88a856f15de80240ff4994661a6daa668113cea0c4a4073f701f05192cb
执行下面命令 初始化当前用户配置 使用kubectl会用到
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
安装pod网络插件
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/a70459be0084506e4ec919aa1c114638878db11b/Documentation/kube-flannel.yml
在各个node上执行 下面加入命令(加入集群中)
kubeadm join 192.168.233.251:6443 --token a9vg9z.dlboqvfuwwzauufq --discovery-token-ca-cert-hash sha256:c2ade88a856f15de80240ff4994661a6daa668113cea0c4a4073f701f05192cb
检测集群状态
kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-0 Healthy {"health": "true"}
集群初始化如果遇到问题，可以使用下面的命令进行清理：
kubeadm reset
ifconfig cni0 down
ip link delete cni0
ifconfig flannel.1 down
ip link delete flannel.1
rm -rf /var/lib/cni/
使用kubectl get pod –all-namespaces -o wide确保所有的Pod都处于Running状态。
[root@k8smaster centos]# kubectl get pod --all-namespaces -o wide
NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
kube-system coredns-8686dcc4fd-5h9xc 1/1 Running 0 15m 10.244.0.3 k8smaster.novalocal
kube-system coredns-8686dcc4fd-8w6l2 1/1 Running 0 15m 10.244.0.2 k8smaster.novalocal
kube-system etcd-k8smaster.novalocal 1/1 Running 0 14m 192.168.233.251 k8smaster.novalocal
kube-system kube-apiserver-k8smaster.novalocal 1/1 Running 0 14m 192.168.233.251 k8smaster.novalocal
kube-system kube-controller-manager-k8smaster.novalocal 1/1 Running 0 14m 192.168.233.251 k8smaster.novalocal
kube-system kube-flannel-ds-amd64-2mfgq 1/1 Running 0 3m34s 192.168.233.35 k8snode2.novalocal
kube-system kube-flannel-ds-amd64-8twxz 1/1 Running 0 3m34s 192.168.233.251 k8smaster.novalocal
kube-system kube-flannel-ds-amd64-sbd6n 1/1 Running 0 3m34s 192.168.233.170 k8snode1.novalocal
kube-system kube-proxy-2m5jh 1/1 Running 0 15m 192.168.233.251 k8smaster.novalocal
kube-system kube-proxy-nfzfl 1/1 Running 0 10m 192.168.233.170 k8snode1.novalocal
kube-system kube-proxy-shxdt 1/1 Running 0 9m47s 192.168.233.35 k8snode2.novalocal
kube-system kube-scheduler-k8smaster.novalocal 1/1 Running 0 14m 192.168.233.251 k8smaster.novalocal
2.4 master node参与工作负载
使用kubeadm初始化的集群，出于安全考虑Pod不会被调度到Master Node上，也就是说Master Node不参与工作负载。这是因为当前的master节点node1被打上了node-role.kubernetes.io/master:NoSchedule的污点标记：
查看污点标记
kubectl describe node k8smaster.novalocal |grep Taint
Taints: node-role.kubernetes.io/master:NoSchedule
执行命令去除标记
kubectl taint nodes k8smaster.novalocal node-role.kubernetes.io/master:NoSchedule-
测试dns
[root@k8smaster centos]# kubectl run curl --image=radial/busyboxplus:curl -it
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
If you don't see a command prompt, try pressing enter.
[ root@curl-66bdcf564-4c42d:/ ]$ nslookup kubernetes.default
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes.default
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local
kube-proxy开启ipvs
#修改ConfigMap的kube-system/kube-proxy中的config.conf，把 mode: "" 改为mode: “ipvs" 保存退出即可
[root@k8smaster centos]# kubectl edit cm kube-proxy -n kube-system
configmap/kube-proxy edited
###删除之前的proxy pod
[root@k8smaster centos]# kubectl get pod -n kube-system |grep kube-proxy |awk '{system("kubectl delete pod "$1" -n kube-system")}'
pod "kube-proxy-2m5jh" deleted
pod "kube-proxy-nfzfl" deleted
pod "kube-proxy-shxdt" deleted
#查看proxy运行状态
[root@k8smaster centos]# kubectl get pod -n kube-system | grep kube-proxy
kube-proxy-54qnw 1/1 Running 0 24s
kube-proxy-bzssq 1/1 Running 0 14s
kube-proxy-cvlcm 1/1 Running 0 37s
#查看日志,如果有 `Using ipvs Proxier.` 说明kube-proxy的ipvs 开启成功!
[root@k8smaster centos]# kubectl logs kube-proxy-54qnw -n kube-system
I0518 20:24:09.319160 1 server_others.go:176] Using ipvs Proxier.
W0518 20:24:09.319751 1 proxier.go:386] IPVS scheduler not specified, use rr by default
I0518 20:24:09.320035 1 server.go:562] Version: v1.14.2
I0518 20:24:09.334372 1 conntrack.go:52] Setting nf_conntrack_max to 131072
I0518 20:24:09.334853 1 config.go:102] Starting endpoints config controller
I0518 20:24:09.334916 1 controller_utils.go:1027] Waiting for caches to sync for endpoints config controller
I0518 20:24:09.334945 1 config.go:202] Starting service config controller
I0518 20:24:09.334976 1 controller_utils.go:1027] Waiting for caches to sync for service config controller
I0518 20:24:09.435153 1 controller_utils.go:1034] Caches are synced for service config controller
I0518 20:24:09.435271 1 controller_utils.go:1034] Caches are synced for endpoints config controller
至此安装就差不多了.
参考:
官方:
https://k8smeetup.github.io/docs/admin/kubeadm/
关于 Taints(污点)和Tolerations(容忍)
https://blog.51cto.com/newfly/2067531
k8s安装
https://www.kubernetes.org.cn/4956.html