-W, --log-warnings[=#]
Log some not critical warnings to the log file
--long-query-time=# Log all queries that have taken more than long_query_time
seconds to execute to file. The argument will be treated
as a decimal value with microsecond precision
--low-priority-updates
INSERT/DELETE/UPDATE has lower priority than selects
--lower-case-table-names[=#]
If set to 1 table names are stored in lowercase on disk
and table names will be case-insensitive. Should be set
to 2 if you are using a case insensitive file system
--master-info-file=name
The location and name of the file that remembers the
master and where the I/O replication thread is in the
master's binlogs.
--master-info-repository=name
Defines the type of the repository for the master
information.
--master-retry-count=#
The number of tries the slave will make to connect to the
master before giving up. Deprecated option, use 'CHANGE
MASTER TO master_retry_count =
--master-verify-checksum
Force checksum verification of logged events in binary
log before sending them to slaves or printing them in
output of SHOW BINLOG EVENTS. Disabled by default.
--max-allowed-packet=#
Max packet length to send to or receive from the server
--max-binlog-cache-size=#
Sets the total size of the transactional cache
--max-binlog-dump-events=#
Option used by mysql-test for debugging and testing of
replication.
--max-binlog-size=# Binary log will be rotated automatically when the size
exceeds this value. Will also apply to relay logs if
max_relay_log_size is 0
--max-binlog-stmt-cache-size=#
Sets the total size of the statement cache
--max-connect-errors=#
If there is more than this number of interrupted
connections from a host this host will be blocked from
further connections
--max-connections=# The number of simultaneous clients allowed
--max-delayed-threads=#
Don't start more than this number of threads to handle
INSERT DELAYED statements. If set to zero INSERT DELAYED
will be not used.This variable is deprecated along with
INSERT DELAYED.
--max-error-count=# Max number of errors/warnings to store for a statement
--max-heap-table-size=#
Don't allow creation of heap tables bigger than this
--max-join-size=# Joins that are probably going to read more than
max_join_size records return an error
--max-length-for-sort-data=#
Max number of bytes in sorted records
--max-prepared-stmt-count=#
Maximum number of prepared statements in the server
--max-relay-log-size=#
If non-zero: relay log will be rotated automatically when
the size exceeds this value; if zero: when the size
exceeds max_binlog_size
--max-seeks-for-key=#
Limit assumed max number of seeks when looking up rows
based on a key
--max-sort-length=# The number of bytes to use when sorting BLOB or TEXT
values (only the first max_sort_length bytes of each
value are used; the rest are ignored)
--max-sp-recursion-depth[=#]
Maximum stored procedure recursion depth
--max-tmp-tables=# Maximum number of temporary tables a client can keep open
at a time
--max-user-connections=#
The maximum number of active connections for a single
user (0 = no limit)
--max-write-lock-count=#
After this many write locks, allow some read locks to run
in between
--memlock Lock mysqld in memory.
--metadata-locks-cache-size=#
Size of unused metadata locks cache
--metadata-locks-hash-instances=#
Number of metadata locks hash instances
--min-examined-row-limit=#
Don't write queries to slow log that examine fewer rows
than that
--multi-range-count=#
Number of key ranges to request at once. This variable
has no effect, and is deprecated. It will be removed in a
future release.
--myisam-block-size=#
Block size to be used for MyISAM index pages
--myisam-data-pointer-size=#
Default pointer size to be used for MyISAM tables
--myisam-max-sort-file-size=#
Don't use the fast sort index method to created index if
the temporary file would get bigger than this
--myisam-mmap-size=#
Restricts the total memory used for memory mapping of
MySQL tables
--myisam-recover-options[=name]
Syntax: myisam-recover-options[=option[,option...]],
where option can be DEFAULT, BACKUP, FORCE, QUICK, or OFF
--myisam-repair-threads=#
If larger than 1, when repairing a MyISAM table all
indexes will be created in parallel, with one thread per
index. The value of 1 disables parallel repair
--myisam-sort-buffer-size=#
The buffer that is allocated when sorting the index when
doing a REPAIR or when creating indexes with CREATE INDEX
or ALTER TABLE
--myisam-stats-method=name
Specifies how MyISAM index statistics collection code
should treat NULLs. Possible values of name are
NULLS_UNEQUAL (default behavior for 4.1 and later),
NULLS_EQUAL (emulate 4.0 behavior), and NULLS_IGNORED
--myisam-use-mmap Use memory mapping for reading and writing MyISAM tables
--net-buffer-length=#
Buffer length for TCP/IP and socket communication
--net-read-timeout=#
Number of seconds to wait for more data from a connection
before aborting the read
--net-retry-count=# If a read on a communication port is interrupted, retry
this many times before giving up
--net-write-timeout=#
Number of seconds to wait for a block to be written to a
connection before aborting the write
-n, --new Use very new possible "unsafe" functions
--old Use compatible behavior
--old-alter-table Use old, non-optimized alter table
--old-passwords=# Determine which hash algorithm to use when generating
passwords using the PASSWORD() function
--old-style-user-limits
Enable old-style user limits (before 5.0.3, user
resources were counted per each user+host vs. per
account).
--open-files-limit=#
If this is not 0, then mysqld will use this value to
reserve file descriptors to use with setrlimit(). If this
value is 0 then mysqld will reserve max_connections*5 or
max_connections + table_cache*2 (whichever is larger)
number of file descriptors
--optimizer-prune-level=#
Controls the heuristic(s) applied during query
optimization to prune less-promising partial plans from
the optimizer search space. Meaning: 0 - do not apply any
heuristic, thus perform exhaustive search; 1 - prune
plans based on number of retrieved rows
--optimizer-search-depth=#
Maximum depth of search performed by the query optimizer.
Values larger than the number of relations in a query
result in better query plans, but take longer to compile
a query. Values smaller than the number of tables in a
relation result in faster optimization, but may produce
very bad query plans. If set to 0, the system will
automatically pick a reasonable value
--optimizer-switch=name
optimizer_switch=option=val[,option=val...], where option
is one of {index_merge, index_merge_union,
index_merge_sort_union, index_merge_intersection,
engine_condition_pushdown, index_condition_pushdown, mrr,
mrr_cost_based, materialization, semijoin, loosescan,
firstmatch, subquery_materialization_cost_based,
block_nested_loop, batched_key_access,
use_index_extensions} and val is one of {on, off,
default}
--optimizer-trace=name
Controls tracing of the Optimizer:
optimizer_trace=option=val[,option=val...], where option
is one of {enabled, one_line} and val is one of {on,
default}
--optimizer-trace-features=name
Enables/disables tracing of selected features of the
Optimizer:
optimizer_trace_features=option=val[,option=val...],
where option is one of {greedy_search, range_optimizer,
dynamic_range, repeated_subselect} and val is one of {on,
off, default}
--optimizer-trace-limit=#
Maximum number of shown optimizer traces
--optimizer-trace-max-mem-size=#
Maximum allowed cumulated size of stored optimizer traces
--optimizer-trace-offset=#
Offset of first optimizer trace to show; see manual
--partition[=name] Enable or disable partition plugin. Possible values are
ON, OFF, FORCE (don't start if the plugin fails to load).
--performance-schema
Enable the performance schema.
(Defaults to on; use --skip-performance-schema to disable.)
--performance-schema-accounts-size=#
Maximum number of instrumented user@host accounts. Use 0
to disable, -1 for automated sizing.
--performance-schema-consumer-events-stages-current
Default startup value for the events_stages_current
consumer.
--performance-schema-consumer-events-stages-history
Default startup value for the events_stages_history
consumer.
--performance-schema-consumer-events-stages-history-long
Default startup value for the events_stages_history_long
consumer.
--performance-schema-consumer-events-statements-current
Default startup value for the events_statements_current
consumer.
(Defaults to on; use --skip-performance-schema-consumer-events-statements-current to disable.)
--performance-schema-consumer-events-statements-history
Default startup value for the events_statements_history
consumer.
--performance-schema-consumer-events-statements-history-long
Default startup value for the
events_statements_history_long consumer.
--performance-schema-consumer-events-waits-current
Default startup value for the events_waits_current
consumer.
--performance-schema-consumer-events-waits-history
Default startup value for the events_waits_history
consumer.
--performance-schema-consumer-events-waits-history-long
Default startup value for the events_waits_history_long
consumer.
--performance-schema-consumer-global-instrumentation
Default startup value for the global_instrumentation
consumer.
(Defaults to on; use --skip-performance-schema-consumer-global-instrumentation to disable.)
--performance-schema-consumer-statements-digest
Default startup value for the statements_digest consumer.
(Defaults to on; use --skip-performance-schema-consumer-statements-digest to disable.)
--performance-schema-consumer-thread-instrumentation
Default startup value for the thread_instrumentation
consumer.
(Defaults to on; use --skip-performance-schema-consumer-thread-instrumentation to disable.)
--performance-schema-digests-size=#
Size of the statement digest. Use 0 to disable, -1 for
automated sizing.
--performance-schema-events-stages-history-long-size=#
Number of rows in EVENTS_STAGES_HISTORY_LONG. Use 0 to
disable, -1 for automated sizing.
--performance-schema-events-stages-history-size=#
Number of rows per thread in EVENTS_STAGES_HISTORY. Use 0
to disable, -1 for automated sizing.
--performance-schema-events-statements-history-long-size=#
Number of rows in EVENTS_STATEMENTS_HISTORY_LONG. Use 0
to disable, -1 for automated sizing.
--performance-schema-events-statements-history-size=#
Number of rows per thread in EVENTS_STATEMENTS_HISTORY.
Use 0 to disable, -1 for automated sizing.
--performance-schema-events-waits-history-long-size=#
Number of rows in EVENTS_WAITS_HISTORY_LONG. Use 0 to
disable, -1 for automated sizing.
--performance-schema-events-waits-history-size=#
Number of rows per thread in EVENTS_WAITS_HISTORY. Use 0
to disable, -1 for automated sizing.
--performance-schema-hosts-size=#
Maximum number of instrumented hosts. Use 0 to disable,
-1 for automated sizing.
--performance-schema-instrument[=name]
Default startup value for a performance schema
instrument.
--performance-schema-max-cond-classes=#
Maximum number of condition instruments.
--performance-schema-max-cond-instances=#
Maximum number of instrumented condition objects. Use 0
to disable, -1 for automated sizing.
--performance-schema-max-file-classes=#
Maximum number of file instruments.
--performance-schema-max-file-handles=#
Maximum number of opened instrumented files.
--performance-schema-max-file-instances=#
Maximum number of instrumented files. Use 0 to disable,
-1 for automated sizing.
--performance-schema-max-mutex-classes=#
Maximum number of mutex instruments.
--performance-schema-max-mutex-instances=#
Maximum number of instrumented MUTEX objects. Use 0 to
disable, -1 for automated sizing.
--performance-schema-max-rwlock-classes=#
Maximum number of rwlock instruments.
--performance-schema-max-rwlock-instances=#
Maximum number of instrumented RWLOCK objects. Use 0 to
disable, -1 for automated sizing.
--performance-schema-max-socket-classes=#
Maximum number of socket instruments.
--performance-schema-max-socket-instances=#
Maximum number of opened instrumented sockets. Use 0 to
disable, -1 for automated sizing.
--performance-schema-max-stage-classes=#
Maximum number of stage instruments.
--performance-schema-max-statement-classes=#
Maximum number of statement instruments.
--performance-schema-max-table-handles=#
Maximum number of opened instrumented tables. Use 0 to
disable, -1 for automated sizing.
--performance-schema-max-table-instances=#
Maximum number of instrumented tables. Use 0 to disable,
-1 for automated sizing.
--performance-schema-max-thread-classes=#
Maximum number of thread instruments.
--performance-schema-max-thread-instances=#
Maximum number of instrumented threads. Use 0 to disable,
-1 for automated sizing.
--performance-schema-session-connect-attrs-size=#
Size of session attribute string buffer per thread. Use 0
to disable, -1 for automated sizing.
--performance-schema-setup-actors-size=#
Maximum number of rows in SETUP_ACTORS.
--performance-schema-setup-objects-size=#
Maximum number of rows in SETUP_OBJECTS.
--performance-schema-users-size=#
Maximum number of instrumented users. Use 0 to disable,
-1 for automated sizing.
--pid-file=name Pid file used by safe_mysqld
--plugin-dir=name Directory for plugins
--plugin-load=name Optional semicolon-separated list of plugins to load,
where each plugin is identified as name=library, where
name is the plugin name and library is the plugin library
in plugin_dir.
--plugin-load-add=name
Optional semicolon-separated list of plugins to load,
where each plugin is identified as name=library, where
name is the plugin name and library is the plugin library
in plugin_dir. This option adds to the list speficied by
--plugin-load in an incremental way. Multiple
--plugin-load-add are supported.
-P, --port=# Port number to use for connection or 0 to default to,
my.cnf, $MYSQL_TCP_PORT, /etc/services, built-in default
(3306), whatever comes first
--port-open-timeout=#
Maximum time in seconds to wait for the port to become
free. (Default: No wait).
--preload-buffer-size=#
The size of the buffer that is allocated when preloading
indexes
--profiling-history-size=#
Limit of query profiling memory
--query-alloc-block-size=#
Allocation block size for query parsing and execution
--query-cache-limit=#
Don't cache results that are bigger than this
--query-cache-min-res-unit=#
The minimum size for blocks allocated by the query cache
--query-cache-size=#
The memory allocated to store results from old queries
--query-cache-type=name
OFF = Don't cache or retrieve results. ON = Cache all
results except SELECT SQL_NO_CACHE ... queries. DEMAND =
Cache only SELECT SQL_CACHE ... queries
--query-cache-wlock-invalidate
Invalidate queries in query cache on LOCK for write
--query-prealloc-size=#
Persistent buffer for query parsing and execution
--range-alloc-block-size=#
Allocation block size for storing ranges during
optimization
--read-buffer-size=#
Each thread that does a sequential scan allocates a
buffer of this size for each table it scans. If you do
many sequential scans, you may want to increase this
value
--read-only Make all non-temporary tables read-only, with the
exception for replication (slave) threads and users with
the SUPER privilege
--read-rnd-buffer-size=#
When reading rows in sorted order after a sort, the rows
are read through this buffer to avoid a disk seeks
--relay-log=name The location and name to use for relay logs
--relay-log-index=name
File that holds the names for relay log files.
--relay-log-info-file=name
The location and name of the file that remembers where
the SQL replication thread is in the relay logs
--relay-log-info-repository=name
Defines the type of the repository for the relay log
information and associated workers.
--relay-log-purge if disabled - do not purge relay logs. if enabled - purge
them as soon as they are no more needed
(Defaults to on; use --skip-relay-log-purge to disable.)
--relay-log-recovery
Enables automatic relay log recovery right after the
database startup, which means that the IO Thread starts
re-fetching from the master right after the last
transaction processed
--relay-log-space-limit=#
Maximum space to use for all relay logs
--replicate-do-db=name
Tells the slave thread to restrict replication to the
specified database. To specify more than one database,
use the directive multiple times, once for each database.
Note that this will only work if you do not use
cross-database queries such as UPDATE some_db.some_table
SET foo='bar' while having selected a different or no
database. If you need cross database updates to work,
make sure you have 3.23.28 or later, and use
replicate-wild-do-table=db_name.%.
--replicate-do-table=name
Tells the slave thread to restrict replication to the
specified table. To specify more than one table, use the
directive multiple times, once for each table. This will
work for cross-database updates, in contrast to
replicate-do-db.
--replicate-ignore-db=name
Tells the slave thread to not replicate to the specified
database. To specify more than one database to ignore,
use the directive multiple times, once for each database.
This option will not work if you use cross database
updates. If you need cross database updates to work, make
sure you have 3.23.28 or later, and use
replicate-wild-ignore-table=db_name.%.
--replicate-ignore-table=name
Tells the slave thread to not replicate to the specified
table. To specify more than one table to ignore, use the
directive multiple times, once for each table. This will
work for cross-database updates, in contrast to
replicate-ignore-db.
--replicate-rewrite-db=name
Updates to a database with a different name than the
original. Example:
replicate-rewrite-db=master_db_name->slave_db_name.
--replicate-same-server-id
In replication, if set to 1, do not skip events having
our server id. Default value is 0 (to break infinite
loops in circular replication). Can't be set to 1 if
--log-slave-updates is used.
--replicate-wild-do-table=name
Tells the slave thread to restrict replication to the
tables that match the specified wildcard pattern. To
specify more than one table, use the directive multiple
times, once for each table. This will work for
cross-database updates. Example:
replicate-wild-do-table=foo%.bar% will replicate only
updates to tables in all databases that start with foo
and whose table names start with bar.
--replicate-wild-ignore-table=name
Tells the slave thread to not replicate to the tables
that match the given wildcard pattern. To specify more
than one table to ignore, use the directive multiple
times, once for each table. This will work for
cross-database updates. Example:
replicate-wild-ignore-table=foo%.bar% will not do updates
to tables in databases that start with foo and whose
table names start with bar.
--report-host=name Hostname or IP of the slave to be reported to the master
during slave registration. Will appear in the output of
SHOW SLAVE HOSTS. Leave unset if you do not want the
slave to register itself with the master. Note that it is
not sufficient for the master to simply read the IP of
the slave off the socket once the slave connects. Due to
NAT and other routing issues, that IP may not be valid
for connecting to the slave from the master or other
hosts
--report-password=name
The account password of the slave to be reported to the
master during slave registration
--report-port=# Port for connecting to slave reported to the master
during slave registration. Set it only if the slave is
listening on a non-default port or if you have a special
tunnel from the master or other clients to the slave. If
not sure, leave this option unset
--report-user=name The account user name of the slave to be reported to the
master during slave registration
--safe-user-create Don't allow new user creation by the user who has no
write privileges to the mysql.user table.
--secure-auth Disallow authentication for accounts that have old
(pre-4.1) passwords
(Defaults to on; use --skip-secure-auth to disable.)
--secure-file-priv=name
Limit LOAD DATA, SELECT ... OUTFILE, and LOAD_FILE() to
files within specified directory
--server-id=# Uniquely identifies the server instance in the community
of replication partners
--server-id-bits=# Set number of significant bits in server-id
--show-slave-auth-info
Show user and password in SHOW SLAVE HOSTS on this
master.
--skip-grant-tables Start without grant tables. This gives all users FULL
ACCESS to all tables.
--skip-host-cache Don't cache host names.
--skip-name-resolve Don't resolve hostnames. All hostnames are IP's or
'localhost'.
--skip-networking Don't allow connection with TCP/IP
--skip-new Don't use new, possibly wrong routines.
--skip-show-database
Don't allow 'SHOW DATABASE' commands
--skip-slave-start If set, slave is not autostarted.
--skip-stack-trace Don't print a stack trace on failure.
--slave-allow-batching
Allow slave to batch requests
--slave-checkpoint-group=#
Maximum number of processed transactions by
Multi-threaded slave before a checkpoint operation is
called to update progress status.
--slave-checkpoint-period=#
Gather workers' activities to Update progress status of
Multi-threaded slave and flush the relay log info to disk
after every #th milli-seconds.
--slave-compressed-protocol
Use compression on master/slave protocol
--slave-exec-mode=name
Modes for how replication events should be executed.
Legal values are STRICT (default) and IDEMPOTENT. In
IDEMPOTENT mode, replication will not stop for operations
that are idempotent. In STRICT mode, replication will
stop on any unexpected difference between the master and
the slave
--slave-load-tmpdir=name
The location where the slave should put its temporary
files when replicating a LOAD DATA INFILE command
--slave-max-allowed-packet=#
The maximum packet length to sent successfully from the
master to slave.
--slave-net-timeout=#
Number of seconds to wait for more data from a
master/slave connection before aborting the read
--slave-parallel-workers=#
Number of worker threads for executing events in parallel
--slave-pending-jobs-size-max=#
Max size of Slave Worker queues holding yet not applied
events.The least possible value must be not less than the
master side max_allowed_packet.
--slave-rows-search-algorithms=name
Set of searching algorithms that the slave will use while
searching for records from the storage engine to either
updated or deleted them. Possible values are: INDEX_SCAN,
TABLE_SCAN and HASH_SCAN. Any combination is allowed, and
the slave will always pick the most suitable algorithm
for any given scenario. (Default: INDEX_SCAN,
TABLE_SCAN).
--slave-skip-errors=name
Tells the slave thread to continue replication when a
query event returns an error from the provided list
--slave-sql-verify-checksum
Force checksum verification of replication events after
reading them from relay log. Note: Events are always
checksum-verified by slave on receiving them from the
network before writing them to the relay log. Enabled by
default.
(Defaults to on; use --skip-slave-sql-verify-checksum to disable.)
--slave-transaction-retries=#
Number of times the slave SQL thread will retry a
transaction in case it failed with a deadlock or elapsed
lock wait timeout, before giving up and stopping
--slave-type-conversions=name
Set of slave type conversions that are enabled. Legal
values are: ALL_LOSSY to enable lossy conversions and
ALL_NON_LOSSY to enable non-lossy conversions. If the
variable is assigned the empty set, no conversions are
allowed and it is expected that the types match exactly.
--slow-launch-time=#
If creating the thread takes longer than this value (in
seconds), the Slow_launch_threads counter will be
incremented
--slow-query-log Log slow queries to a table or log file. Defaults logging
to a file hostname-slow.log or a table mysql.slow_log if
--log-output=TABLE is used. Must be enabled to activate
other slow log options
--slow-query-log-file=name
Log slow queries to given log file. Defaults logging to
hostname-slow.log. Must be enabled to activate other slow
log options
--socket=name Socket file to use for connection
--sort-buffer-size=#
Each thread that needs to do a sort allocates a buffer of
this size
--sporadic-binlog-dump-fail
Option used by mysql-test for debugging and testing of
replication.
--sql-mode=name Syntax: sql-mode=mode[,mode[,mode...]]. See the manual
for the complete list of valid sql modes
--ssl Enable SSL for connection (automatically enabled with
other flags).
--ssl-ca=name CA file in PEM format (check OpenSSL docs, implies --ssl)
--ssl-capath=name CA directory (check OpenSSL docs, implies --ssl)
--ssl-cert=name X509 cert in PEM format (implies --ssl)
--ssl-cipher=name SSL cipher to use (implies --ssl)
--ssl-crl=name CRL file in PEM format (check OpenSSL docs, implies
--ssl)
--ssl-crlpath=name CRL directory (check OpenSSL docs, implies --ssl)
--ssl-key=name X509 key in PEM format (implies --ssl)
--stored-program-cache=#
The soft upper limit for number of cached stored routines
for one connection.
--super-large-pages Enable support for super large pages.
-s, --symbolic-links
Enable symbolic link support.
(Defaults to on; use --skip-symbolic-links to disable.)
--sync-binlog=# Synchronously flush binary log to disk after every #th
write to the file. Use 0 (default) to disable synchronous
flushing
--sync-frm Sync .frm files to disk on creation
(Defaults to on; use --skip-sync-frm to disable.)
--sync-master-info=#
Synchronously flush master info to disk after every #th
event. Use 0 to disable synchronous flushing
--sync-relay-log=# Synchronously flush relay log to disk after every #th
event. Use 0 to disable synchronous flushing
--sync-relay-log-info=#
Synchronously flush relay log info to disk after every
#th transaction. Use 0 to disable synchronous flushing
--sysdate-is-now Non-default option to alias SYSDATE() to NOW() to make it
safe-replicable. Since 5.0, SYSDATE() returns a `dynamic'
value different for different invocations, even within
the same statement.
--table-definition-cache=#
The number of cached table definitions
--table-open-cache=#
The number of cached open tables (total for all table
cache instances)
--table-open-cache-instances=#
The number of table cache instances
--tc-heuristic-recover=name
Decision to use in heuristic recover process. Possible
values are COMMIT or ROLLBACK.
--temp-pool Using this option will cause most temporary files created
to use a small set of names, rather than a unique name
for each new file.
(Defaults to on; use --skip-temp-pool to disable.)
--thread-cache-size=#
How many threads we should keep in a cache for reuse
--thread-concurrency=#
Permits the application to give the threads system a hint
for the desired number of threads that should be run at
the same time. This variable has no effect, and is
deprecated. It will be removed in a future release.
--thread-handling=name
Define threads usage for handling queries, one of
one-thread-per-connection, no-threads, loaded-dynamically
--thread-stack=# The stack size for each thread
--time-format=name The TIME format (ignored)
--timed-mutexes Specify whether to time mutexes (only InnoDB mutexes are
currently supported)
--tmp-table-size=# If an internal in-memory temporary table exceeds this
size, MySQL will automatically convert it to an on-disk
MyISAM table
-t, --tmpdir=name Path for temporary files. Several paths may be specified,
separated by a colon (:), in this case they are used in a
round-robin fashion
--transaction-alloc-block-size=#
Allocation block size for transactions to be stored in
binary log
--transaction-isolation=name
Default transaction isolation level.
--transaction-prealloc-size=#
Persistent buffer for transactions to be stored in binary
log
--transaction-read-only
Default transaction access mode. True if transactions are
read-only.
--updatable-views-with-limit=name
YES = Don't issue an error message (warning only) if a
VIEW without presence of a key of the underlying table is
used in queries with a LIMIT clause for updating. NO =
Prohibit update of a VIEW, which does not contain a key
of the underlying table and the query uses a LIMIT clause
(usually get from GUI tools)
-u, --user=name Run mysqld daemon as user.
--validate-user-plugins
Turns on additional validation of authentication plugins
assigned to user accounts.
(Defaults to on; use --skip-validate-user-plugins to disable.)
-v, --verbose Used with --help option for detailed help.
-V, --version Output version information and exit.
--wait-timeout=# The number of seconds the server waits for activity on a
connection before closing it
Variables (--variable-name=value)
and boolean options {FALSE|TRUE} Value (after reading options)
---------------------------------------------------------- ---------------
abort-slave-event-count 0
allow-suspicious-udfs FALSE
archive ON
auto-increment-increment 1
auto-increment-offset 1
autocommit TRUE
automatic-sp-privileges TRUE
back-log 80
basedir /usr/local/mysql/
big-tables FALSE
bind-address *
binlog-cache-size 32768
binlog-checksum CRC32
binlog-direct-non-transactional-updates FALSE
binlog-format STATEMENT
binlog-max-flush-queue-time 0
binlog-order-commits TRUE
binlog-row-event-max-size 8192
binlog-row-p_w_picpath FULL
binlog-rows-query-log-events FALSE
binlog-stmt-cache-size 32768
blackhole ON
bulk-insert-buffer-size 8388608
character-set-client-handshake TRUE
character-set-filesystem binary
character-set-server utf8
character-sets-dir /usr/local/mysql/share/charsets/
chroot (No default value)
collation-server utf8_general_ci
completion-type NO_CHAIN
concurrent-insert AUTO
connect-timeout 10
console FALSE
datadir /var/lib/mysql/
date-format %Y-%m-%d
datetime-format %Y-%m-%d %H:%i:%s
default-storage-engine InnoDB
default-time-zone (No default value)
default-tmp-storage-engine InnoDB
default-week-format 0
delay-key-write ON
delayed-insert-limit 100
delayed-insert-timeout 300
delayed-queue-size 1000
des-key-file (No default value)
disconnect-on-expired-password TRUE
disconnect-slave-event-count 0
div-precision-increment 4
end-markers-in-json FALSE
enforce-gtid-consistency FALSE
eq-range-index-dive-limit 10
event-scheduler OFF
expire-logs-days 0
explicit-defaults-for-timestamp FALSE
external-locking FALSE
federated ON
flush FALSE
flush-time 0
ft-boolean-syntax + -><()~*:""&|
ft-max-word-len 84
ft-min-word-len 4
ft-query-expansion-limit 20
ft-stopword-file (No default value)
gdb FALSE
general-log FALSE
general-log-file /var/lib/mysql/localhost.log
group-concat-max-len 1024
gtid-mode OFF
help TRUE
host-cache-size 279
ignore-builtin-innodb FALSE
init-connect
init-file (No default value)
init-slave
innodb ON
innodb-adaptive-flushing TRUE
innodb-adaptive-flushing-lwm 10
innodb-adaptive-hash-index TRUE
innodb-adaptive-max-sleep-delay 150000
innodb-additional-mem-pool-size 8388608
innodb-api-bk-commit-interval 5
innodb-api-disable-rowlock FALSE
innodb-api-enable-binlog FALSE
innodb-api-enable-mdl FALSE
innodb-api-trx-level 0
innodb-autoextend-increment 64
innodb-autoinc-lock-mode 1
innodb-buffer-page ON
innodb-buffer-page-lru ON
innodb-buffer-pool-dump-at-shutdown FALSE
innodb-buffer-pool-dump-now FALSE
innodb-buffer-pool-filename ib_buffer_pool
innodb-buffer-pool-instances 0
innodb-buffer-pool-load-abort FALSE
innodb-buffer-pool-load-at-startup FALSE
innodb-buffer-pool-load-now FALSE
innodb-buffer-pool-size 134217728
innodb-buffer-pool-stats ON
innodb-change-buffer-max-size 25
innodb-change-buffering all
innodb-checksum-algorithm innodb
innodb-checksums TRUE
innodb-cmp ON
innodb-cmp-per-index ON
innodb-cmp-per-index-enabled FALSE
innodb-cmp-per-index-reset ON
innodb-cmp-reset ON
innodb-cmpmem ON
innodb-cmpmem-reset ON
innodb-commit-concurrency 0
innodb-compression-failure-threshold-pct 5
innodb-compression-level 6
innodb-compression-pad-pct-max 50
innodb-concurrency-tickets 5000
innodb-data-file-path (No default value)
innodb-data-home-dir (No default value)
innodb-disable-sort-file-cache FALSE
innodb-doublewrite TRUE
innodb-fast-shutdown 1
innodb-file-format Antelope
innodb-file-format-check TRUE
innodb-file-format-max Antelope
innodb-file-io-threads 4
innodb-file-per-table TRUE
innodb-flush-log-at-timeout 1
innodb-flush-log-at-trx-commit 1
innodb-flush-method (No default value)
innodb-flush-neighbors 1
innodb-flushing-avg-loops 30
innodb-force-load-corrupted FALSE
innodb-force-recovery 0
innodb-ft-aux-table (No default value)
innodb-ft-being-deleted ON
innodb-ft-cache-size 8000000
innodb-ft-config ON
innodb-ft-default-stopword ON
innodb-ft-deleted ON
innodb-ft-enable-diag-print FALSE
innodb-ft-enable-stopword TRUE
innodb-ft-index-cache ON
innodb-ft-index-table ON
innodb-ft-max-token-size 84
innodb-ft-min-token-size 3
innodb-ft-num-word-optimize 2000
innodb-ft-server-stopword-table (No default value)
innodb-ft-sort-pll-degree 2
innodb-ft-user-stopword-table (No default value)
innodb-io-capacity 200
innodb-io-capacity-max 18446744073709551615
innodb-large-prefix FALSE
innodb-lock-wait-timeout 50
innodb-lock-waits ON
innodb-locks ON
innodb-locks-unsafe-for-binlog FALSE
innodb-log-buffer-size 8388608
innodb-log-compressed-pages TRUE
innodb-log-file-size 50331648
innodb-log-files-in-group 2
innodb-log-group-home-dir (No default value)
innodb-lru-scan-depth 1024
innodb-max-dirty-pages-pct 75
innodb-max-dirty-pages-pct-lwm 0
innodb-max-purge-lag 0
innodb-max-purge-lag-delay 0
innodb-metrics ON
innodb-mirrored-log-groups 0
innodb-monitor-disable (No default value)
innodb-monitor-enable (No default value)
innodb-monitor-reset (No default value)
innodb-monitor-reset-all (No default value)
innodb-old-blocks-pct 37
innodb-old-blocks-time 1000
innodb-online-alter-log-max-size 134217728
innodb-open-files 0
innodb-optimize-fulltext-only FALSE
innodb-page-size 16384
innodb-print-all-deadlocks FALSE
innodb-purge-batch-size 300
innodb-purge-threads 1
innodb-random-read-ahead FALSE
innodb-read-ahead-threshold 56
innodb-read-io-threads 4
innodb-read-only FALSE
innodb-replication-delay 0
innodb-rollback-on-timeout FALSE
innodb-rollback-segments 128
innodb-sort-buffer-size 1048576
innodb-spin-wait-delay 6
innodb-stats-auto-recalc TRUE
innodb-stats-method nulls_equal
innodb-stats-on-metadata FALSE
innodb-stats-persistent TRUE
innodb-stats-persistent-sample-pages 20
innodb-stats-sample-pages 8
innodb-stats-transient-sample-pages 8
innodb-status-file FALSE
innodb-strict-mode FALSE
innodb-support-xa TRUE
innodb-sync-array-size 1
innodb-sync-spin-loops 30
innodb-sys-columns ON
innodb-sys-datafiles ON
innodb-sys-fields ON
innodb-sys-foreign ON
innodb-sys-foreign-cols ON
innodb-sys-indexes ON
innodb-sys-tables ON
innodb-sys-tablespaces ON
innodb-sys-tablestats ON
innodb-table-locks TRUE
innodb-thread-concurrency 0
innodb-thread-sleep-delay 10000
innodb-trx ON
innodb-undo-directory .
innodb-undo-logs 128
innodb-undo-tablespaces 0
innodb-use-native-aio TRUE
innodb-use-sys-malloc TRUE
innodb-write-io-threads 4
interactive-timeout 28800
join-buffer-size 262144
keep-files-on-create FALSE
key-buffer-size 8388608
key-cache-age-threshold 300
key-cache-block-size 1024
key-cache-division-limit 100
language /usr/local/mysql/share/
large-pages FALSE
lc-messages en_US
lc-messages-dir /usr/local/mysql/share/
lc-time-names en_US
local-infile TRUE
lock-wait-timeout 31536000
log-bin (No default value)
log-bin-index (No default value)
log-bin-trust-function-creators FALSE
log-bin-use-v1-row-events FALSE
log-error
log-isam myisam.log
log-output FILE
log-queries-not-using-indexes FALSE
log-raw FALSE
log-short-format FALSE
log-slave-updates FALSE
log-slow-admin-statements FALSE
log-slow-slave-statements FALSE
log-tc tc.log
log-tc-size 24576
log-throttle-queries-not-using-indexes 0
log-warnings 1
long-query-time 10
low-priority-updates FALSE
lower-case-table-names 0
master-info-file master.info
master-info-repository FILE
master-retry-count 86400
master-verify-checksum FALSE
max-allowed-packet 4194304
max-binlog-cache-size 18446744073709547520
max-binlog-dump-events 0
max-binlog-size 1073741824
max-binlog-stmt-cache-size 18446744073709547520
max-connect-errors 100
max-connections 151
max-delayed-threads 20
max-error-count 64
max-heap-table-size 16777216
max-join-size 18446744073709551615
max-length-for-sort-data 1024
max-prepared-stmt-count 16382
max-relay-log-size 0
max-seeks-for-key 18446744073709551615
max-sort-length 1024
max-sp-recursion-depth 0
max-tmp-tables 32
max-user-connections 0
max-write-lock-count 18446744073709551615
memlock FALSE
metadata-locks-cache-size 1024
metadata-locks-hash-instances 8
min-examined-row-limit 0
multi-range-count 256
myisam-block-size 1024
myisam-data-pointer-size 6
myisam-max-sort-file-size 9223372036853727232
myisam-mmap-size 18446744073709551615
myisam-recover-options OFF
myisam-repair-threads 1
myisam-sort-buffer-size 8388608
myisam-stats-method nulls_unequal
myisam-use-mmap FALSE
net-buffer-length 16384
net-read-timeout 30
net-retry-count 10
net-write-timeout 60
new FALSE
old FALSE
old-alter-table FALSE
old-passwords 0
old-style-user-limits FALSE
open-files-limit 5000
optimizer-prune-level 1
optimizer-search-depth 62
optimizer-switch index_merge=on,index_merge_union=on,index_merge_sort_union=on,index_merge_intersection=on,engine_condition_pushdown=on,index_condition_pushdown=on,mrr=on,mrr_cost_based=on,block_nested_loop=on,batched_key_access=off,materialization=on,semijoin=on,loosescan=on,firstmatch=on,subquery_materialization_cost_based=on,use_index_extensions=on
optimizer-trace
optimizer-trace-features greedy_search=on,range_optimizer=on,dynamic_range=on,repeated_subselect=on
optimizer-trace-limit 1
optimizer-trace-max-mem-size 16384
optimizer-trace-offset -1
partition ON
performance-schema TRUE
performance-schema-accounts-size -1
performance-schema-consumer-events-stages-current FALSE
performance-schema-consumer-events-stages-history FALSE
performance-schema-consumer-events-stages-history-long FALSE
performance-schema-consumer-events-statements-current TRUE
performance-schema-consumer-events-statements-history FALSE
performance-schema-consumer-events-statements-history-long FALSE
performance-schema-consumer-events-waits-current FALSE
performance-schema-consumer-events-waits-history FALSE
performance-schema-consumer-events-waits-history-long FALSE
performance-schema-consumer-global-instrumentation TRUE
performance-schema-consumer-statements-digest TRUE
performance-schema-consumer-thread-instrumentation TRUE
performance-schema-digests-size -1
performance-schema-events-stages-history-long-size -1
performance-schema-events-stages-history-size -1
performance-schema-events-statements-history-long-size -1
performance-schema-events-statements-history-size -1
performance-schema-events-waits-history-long-size -1
performance-schema-events-waits-history-size -1
performance-schema-hosts-size -1
performance-schema-instrument
performance-schema-max-cond-classes 80
performance-schema-max-cond-instances -1
performance-schema-max-file-classes 50
performance-schema-max-file-handles 32768
performance-schema-max-file-instances -1
performance-schema-max-mutex-classes 200
performance-schema-max-mutex-instances -1
performance-schema-max-rwlock-classes 30
performance-schema-max-rwlock-instances -1
performance-schema-max-socket-classes 10
performance-schema-max-socket-instances -1
performance-schema-max-stage-classes 150
performance-schema-max-statement-classes 167
performance-schema-max-table-handles -1
performance-schema-max-table-instances -1
performance-schema-max-thread-classes 50
performance-schema-max-thread-instances -1
performance-schema-session-connect-attrs-size -1
performance-schema-setup-actors-size 100
performance-schema-setup-objects-size 100
performance-schema-users-size -1
pid-file /var/lib/mysql/localhost.pid
plugin-dir /usr/local/mysql/lib/plugin/
port 3306
port-open-timeout 0
preload-buffer-size 32768
profiling-history-size 15
query-alloc-block-size 8192
query-cache-limit 1048576
query-cache-min-res-unit 4096
query-cache-size 1048576
query-cache-type OFF
query-cache-wlock-invalidate FALSE
query-prealloc-size 8192
range-alloc-block-size 4096
read-buffer-size 131072
read-only FALSE
read-rnd-buffer-size 262144
relay-log (No default value)
relay-log-index (No default value)
relay-log-info-file relay-log.info
relay-log-info-repository FILE
relay-log-purge TRUE
relay-log-recovery FALSE
relay-log-space-limit 0
replicate-same-server-id FALSE
report-host (No default value)
report-password (No default value)
report-port 0
report-user (No default value)
safe-user-create FALSE
secure-auth TRUE
secure-file-priv (No default value)
server-id 0
server-id-bits 32
show-slave-auth-info FALSE
skip-grant-tables FALSE
skip-name-resolve FALSE
skip-networking FALSE
skip-show-database FALSE
skip-slave-start FALSE
slave-allow-batching FALSE
slave-checkpoint-group 512
slave-checkpoint-period 300
slave-compressed-protocol FALSE
slave-exec-mode STRICT
slave-load-tmpdir /tmp
slave-max-allowed-packet 1073741824
slave-net-timeout 3600
slave-parallel-workers 0
slave-pending-jobs-size-max 16777216
slave-rows-search-algorithms TABLE_SCAN,INDEX_SCAN
slave-skip-errors (No default value)
slave-sql-verify-checksum TRUE
slave-transaction-retries 10
slave-type-conversions
slow-launch-time 2
slow-query-log FALSE
slow-query-log-file /var/lib/mysql/localhost-slow.log
socket /var/lib/mysql/mysql.sock
sort-buffer-size 262144
sporadic-binlog-dump-fail FALSE
sql-mode NO_ENGINE_SUBSTITUTION
ssl FALSE
ssl-ca (No default value)
ssl-capath (No default value)
ssl-cert (No default value)
ssl-cipher (No default value)
ssl-crl (No default value)
ssl-crlpath (No default value)
ssl-key (No default value)
stored-program-cache 256
super-large-pages FALSE
symbolic-links FALSE
sync-binlog 0
sync-frm TRUE
sync-master-info 10000
sync-relay-log 10000
sync-relay-log-info 10000
sysdate-is-now FALSE
table-definition-cache 1400
table-open-cache 2000
table-open-cache-instances 1
tc-heuristic-recover COMMIT
temp-pool TRUE
thread-cache-size 9
thread-concurrency 10
thread-handling one-thread-per-connection
thread-stack 262144
time-format %H:%i:%s
timed-mutexes FALSE
tmp-table-size 16777216
tmpdir /tmp
transaction-alloc-block-size 8192
transaction-isolation REPEATABLE-READ
transaction-prealloc-size 4096
transaction-read-only FALSE
updatable-views-with-limit YES
validate-user-plugins TRUE
verbose TRUE
wait-timeout 28800
To see what values a running MySQL server is using, type
'mysqladmin variables' instead of 'mysqld --verbose --help'.
mysql5.6配置文件详解（二）
转载于:https://blog.51cto.com/wjn219/1198084