线段树版子题【HDU - 1166 敌兵布阵】【HDU-1754 I Hate It】【HDU-1698 Just a Hook】【OpenJ_Bailian3439A Simple Pro】
敌兵布阵
C国的死对头A国这段时间正在进行军事演习，所以C国间谍头子Derek和他手下Tidy又开始忙乎了。A国在海岸线沿直线布置了N个工兵营地,Derek和Tidy的任务就是要监视这些工兵营地的活动情况。由于采取了某种先进的监测手段，所以每个工兵营地的人数C国都掌握的一清二楚,每个工兵营地的人数都有可能发生变动，可能增加或减少若干人手,但这些都逃不过C国的监视。
中央情报局要研究敌人究竟演习什么战术,所以Tidy要随时向Derek汇报某一段连续的工兵营地一共有多少人,例如Derek问:“Tidy,马上汇报第3个营地到第10个营地共有多少人!”Tidy就要马上开始计算这一段的总人数并汇报。但敌兵营地的人数经常变动，而Derek每次询问的段都不一样，所以Tidy不得不每次都一个一个营地的去数，很快就精疲力尽了，Derek对Tidy的计算速度越来越不满:"你个死肥仔，算得这么慢，我炒你鱿鱼!”Tidy想：“你自己来算算看，这可真是一项累人的工作!我恨不得你炒我鱿鱼呢!”无奈之下，Tidy只好打电话向计算机专家Windbreaker求救,Windbreaker说：“死肥仔，叫你平时做多点acm题和看多点算法书，现在尝到苦果了吧!”Tidy说："我知错了。。。"但Windbreaker已经挂掉电话了。Tidy很苦恼，这么算他真的会崩溃的，聪明的读者，你能写个程序帮他完成这项工作吗？不过如果你的程序效率不够高的话，Tidy还是会受到Derek的责骂的.
Input
第一行一个整数T，表示有T组数据。
每组数据第一行一个正整数N（N<=50000）,表示敌人有N个工兵营地，接下来有N个正整数,第i个正整数ai代表第i个工兵营地里开始时有ai个人（1<=ai<=50）。
接下来每行有一条命令，命令有4种形式：
(1) Add i j,i和j为正整数,表示第i个营地增加j个人（j不超过30）
(2)Sub i j ,i和j为正整数,表示第i个营地减少j个人（j不超过30）;
(3)Query i j ,i和j为正整数,i<=j，表示询问第i到第j个营地的总人数;
(4)End 表示结束，这条命令在每组数据最后出现;
每组数据最多有40000条命令
Output
对第i组数据,首先输出“Case i:”和回车,
对于每个Query询问，输出一个整数并回车,表示询问的段中的总人数,这个数保持在int以内。
Sample Input
1 10 1 2 3 4 5 6 7 8 9 10 Query 1 3 Add 3 6 Query 2 7 Sub 10 2 Add 6 3 Query 3 10 End
Sample Output
Case 1: 6 33 59
#include
#include
#include
#include
#include
#define maxn 200008
using namespace std;
struct node{
int lt;
int rt;
int sum;
}nod[maxn];
int num[maxn];
void pushup(int cur)
{
nod[cur].sum=nod[cur<<1].sum+nod[cur<<1|1].sum;
}
void build(int l,int r,int cur)
{
int m;
//nod[cur].sum=0;
//nod[cur].laz=0;
if(l==r)
{
nod[cur].sum=num[l];
return;
}
m = (l+r) >> 1;
build(l,m,cur<<1);
build(m+1,r,cur<<1|1);
pushup(cur);
}
void updata(int tar,int val,int l,int r,int cur)
{
int m;
if(l==r)
{
nod[cur].sum+=val;
// nod[cur].laz+=val;
return ;
}
m=(l+r)>>1;
if(tar<=m) updata(tar,val,l,m,cur<<1);
else updata(tar,val,m+1,r,cur<<1|1);
pushup(cur);
}
int queryll(int pl,int pr,int l,int r,int cur)
{
int m,res;
res=0;
if(pl<=l&&r<=pr)
return nod[cur].sum;
m=(l+r)>>1;
if(pl<=m) res+=queryll(pl,pr,l,m,cur<<1);
if(pr>m) res+=queryll(pl,pr,m+1,r,cur<<1|1);
return res;
}
int main()
{
int t;
scanf("%d",&t);
for(int count=1;count<=t;count++)
{
memset(nod,0,sizeof(nod));
int n;
printf("Case %d:\n",count);
scanf("%d",&n);
for(int i=1;i<=n;i++)
scanf("%d",&num[i]);
build(1,n,1);
char str[10];
int a,b;
while(1)
{
scanf("%s",str);
if(str[0]=='E')
break;
scanf("%d%d",&a,&b);
if(str[0]=='A')
{
updata(a,b,1,n,1);
continue;
}
if(str[0]=='S')
{
updata(a,-b,1,n,1);
continue;
}
else
{
int ans=queryll(a,b,1,n,1);
printf("%d\n",ans);
}
}
}
} I Hate It
很多学校流行一种比较的习惯。老师们很喜欢询问，从某某到某某当中，分数最高的是多少。
这让很多学生很反感。
不管你喜不喜欢，现在需要你做的是，就是按照老师的要求，写一个程序，模拟老师的询问。当然，老师有时候需要更新某位同学的成绩。
Input
本题目包含多组测试，请处理到文件结束。
在每个测试的第一行，有两个正整数 N 和 M ( 0
第二行包含N个整数，代表这N个学生的初始成绩，其中第i个数代表ID为i的学生的成绩。
接下来有M行。每一行有一个字符 C (只取'Q'或'U') ，和两个正整数A，B。
当C为'Q'的时候，表示这是一条询问操作，它询问ID从A到B(包括A,B)的学生当中，成绩最高的是多少。
当C为'U'的时候，表示这是一条更新操作，要求把ID为A的学生的成绩更改为B。
Output
对于每一次询问操作，在一行里面输出最高成绩。
Sample Input
5 6 1 2 3 4 5 Q 1 5 U 3 6 Q 3 4 Q 4 5 U 2 9 Q 1 5
Sample Output
5 6 5 9
#include
#include
#include
#include
#include
#define maxn 900009
using namespace std;
struct node{
int lt;
int rt;
int sum;
}nod[maxn];
int num[maxn];
void pushup(int cur)
{
nod[cur].sum=max(nod[cur<<1].sum,nod[cur<<1|1].sum);
}
void build(int l,int r,int cur)
{
int m;
//nod[cur].sum=0;
//nod[cur].laz=0;
if(l==r)
{
nod[cur].sum=num[l];
return;
}
m = (l+r) >> 1;
build(l,m,cur<<1);
build(m+1,r,cur<<1|1);
pushup(cur);
}
void updata(int tar,int val,int l,int r,int cur)
{
int m;
if(l==r)
{
nod[cur].sum=val;
// nod[cur].laz+=val;
return ;
}
m=(l+r)>>1;
if(tar<=m) updata(tar,val,l,m,cur<<1);
else updata(tar,val,m+1,r,cur<<1|1);
pushup(cur);
}
int queryll(int pl,int pr,int l,int r,int cur)
{
int m,res;
res=0;
if(pl<=l&&r<=pr)
return nod[cur].sum;
m=(l+r)>>1;
if(pl<=m) res=max(res,queryll(pl,pr,l,m,cur<<1));
if(pr>m) res=max(res,queryll(pl,pr,m+1,r,cur<<1|1));
return res;
}
int main()
{
int n,m;
while(scanf("%d%d",&n,&m)!=EOF)
{
memset(nod,0,sizeof(nod));
for(int i=1;i<=n;i++)
scanf("%d",&num[i]);
build(1,n,1);
char st;
int a,b;
for(int i=1;i<=m;i++)
{
cin>>st;
scanf("%d%d",&a,&b);
if(st=='U')
{
updata(a,b,1,n,1);
continue;
}
else
{
int ans=queryll(a,b,1,n,1);
printf("%d\n",ans);
}
}
}
return 0;
} Just a Hook
In the game of DotA, Pudge’s meat hook is actually the most horrible thing for most of the heroes. The hook is made up of several consecutive metallic sticks which are of the same length.
Now Pudge wants to do some operations on the hook.
Let us number the consecutive metallic sticks of the hook from 1 to N. For each operation, Pudge can change the consecutive metallic sticks, numbered from X to Y, into cupreous sticks, silver sticks or golden sticks.
The total value of the hook is calculated as the sum of values of N metallic sticks. More precisely, the value for each kind of stick is calculated as follows:
For each cupreous stick, the value is 1.
For each silver stick, the value is 2.
For each golden stick, the value is 3.
Pudge wants to know the total value of the hook after performing the operations.
You may consider the original hook is made up of cupreous sticks.
Input
The input consists of several test cases. The first line of the input is the number of the cases. There are no more than 10 cases.
For each case, the first line contains an integer N, 1<=N<=100,000, which is the number of the sticks of Pudge’s meat hook and the second line contains an integer Q, 0<=Q<=100,000, which is the number of the operations.
Next Q lines, each line contains three integers X, Y, 1<=X<=Y<=N, Z, 1<=Z<=3, which defines an operation: change the sticks numbered from X to Y into the metal kind Z, where Z=1 represents the cupreous kind, Z=2 represents the silver kind and Z=3 represents the golden kind.
Output
For each case, print a number in a line representing the total value of the hook after the operations. Use the format in the example.
Sample Input
1 10 2 1 5 2 5 9 3
Sample Output
Case 1: The total value of the hook is 24.
#include
#include
#include
#include
#include
#define maxn 500005
using namespace std;
struct nod{
int l;
int r;
int sum;
int laz;
}tree[maxn];
void pushup(int cur)
{
tree[cur].sum=tree[cur<<1].sum+tree[cur<<1|1].sum;
}
void build(int l,int r,int cur)
{
if(l==r)
{
tree[cur].sum=1;
return ;
}
int m=(l+r)>>1;
tree[cur].laz=0;
build(l,m,cur<<1);
build(m+1,r,cur<<1|1);
pushup(cur);
}
void pushdown(int cur,int l,int r)
{
if(tree[cur].laz)
{
int m=(l+r)>>1;
tree[cur<<1].laz=tree[cur].laz;
tree[cur<<1|1].laz=tree[cur].laz;
tree[cur<<1].sum=tree[cur].laz*(m-l+1);
tree[cur<<1|1].sum=tree[cur].laz*(r-m);
tree[cur].laz=0;
}
}
void updatall(int lt,int rt,int c,int l,int r,int cur)
{
if(lt<=l&&r<=rt)
{
tree[cur].laz=c;
tree[cur].sum=c*(r-l+1);
return ;
}
int m=(l+r)>>1;
pushdown(cur,l,r);
if(lt<=m) updatall(lt,rt,c,l,m,cur<<1);
if(rt>m) updatall(lt,rt,c,m+1,r,cur<<1|1);
pushup(cur);
}
int main()
{
int t;
scanf("%d",&t);
int cout;
for(cout=1;cout<=t;cout++)
{
// memset(tree,0,sizeof(tree));
int n,m;
scanf("%d%d",&n,&m);
build(1,n,1);
for(int i=1;i<=m;i++)
{
int a,b,c;
scanf("%d%d%d",&a,&b,&c);
updatall(a,b,c,1,n,1);
}
printf("Case %d: The total value of the hook is %d.\n",cout,tree[1].sum);
}
return 0;
} A Simple Problem with Integers
You have N integers, A1, A2, ... , AN. You need to deal with two kinds of operations. One type of operation is to add some given number to each number in a given interval. The other is to ask for the sum of numbers in a given interval.
Input
The first line contains two numbers N and Q. 1 ≤ N,Q ≤ 100000.
The second line contains N numbers, the initial values of A1, A2, ... , AN. -1000000000 ≤ Ai ≤ 1000000000.
Each of the next Q lines represents an operation.
"C a b c" means adding c to each of Aa, Aa+1, ... , Ab. -10000 ≤ c ≤ 10000.
"Q a b" means querying the sum of Aa, Aa+1, ... , Ab.
Output
You need to answer all Q commands in order. One answer in a line.
Sample Input
10 5 1 2 3 4 5 6 7 8 9 10 Q 4 4 Q 1 10 Q 2 4 C 3 6 3 Q 2 4
Sample Output
4 55 9 15
Hint
The sums may exceed the range of 32-bit integers.
#include
#include
#include
#include
#define maxn 1000000
using namespace std;
typedef long long ll;
struct node{
int l;
int r;
ll sum;
ll laz;
}tree[maxn];
int num[maxn];
void pushup(int cur)
{
tree[cur].sum=tree[cur<<1].sum+tree[cur<<1|1].sum;
}
void build(int l,int r,int cur)
{
int m=(l+r)>>1;
if(l==r)
{
tree[cur].sum=num[l];
return ;
}
tree[cur].laz=0;
build(l,m,cur<<1);
build(m+1,r,cur<<1|1);
pushup(cur);
}
void pushdown(int cur,int l,int r)
{
if(tree[cur].laz)
{
int m=(l+r)>>1;
tree[cur<<1].laz+=tree[cur].laz;
tree[cur<<1|1].laz+=tree[cur].laz;
tree[cur<<1].sum+=tree[cur].laz*(m-l+1);
tree[cur<<1|1].sum+=tree[cur].laz*(r-m);
tree[cur].laz=0;
}
}
void updatall(int lt,int rt,int c,int l,int r,int cur)
{
if(lt<=l&&rt>=r)
{
tree[cur].laz+=c;
tree[cur].sum+=(r-l+1)*c;
return ;
}
int m=(l+r)>>1;
pushdown(cur,l,r);
if(lt<=m) updatall(lt,rt,c,l,m,cur<<1);
if(rt>m) updatall(lt,rt,c,m+1,r,cur<<1|1);
pushup(cur);
}
ll queryll(int lt,int rt,int l,int r,int cur)
{
if(lt<=l&&rt>=r)
{
return tree[cur].sum;
}
int m=(l+r)>>1;
pushdown(cur,l,r);
ll ans=0;
if(lt<=m) ans+=queryll(lt,rt,l,m,cur<<1);
if(rt>m ) ans+=queryll(lt,rt,m+1,r,cur<<1|1);
return ans;
}
int main()
{
int n,m;
while(scanf("%d%d",&n,&m)!=EOF)
{
for(int i=1;i<=n;i++)
scanf("%d",&num[i]);
build(1,n,1);
char st;
int a,b,c;
for(int i=0;i>st;
if(st=='Q')
{
scanf("%d%d",&a,&b);
ll ans=queryll(a,b,1,n,1);
printf("%lld\n",ans);
}
else
{
scanf("%d%d%d",&a,&b,&c);
updatall(a,b,c,1,n,1);
}
}
}
return 0;
} 这几道题都很基础，自己当时做的时候就是没有理清楚自己应该传什么参数，所以看起来代码不是很美观。
难度不大的题目，静下心来，都会解决的。