RK3399Pro python环境相关配置

RK3399Pro的环境配置

    • opencv,tensorflow,pytorch的安装
    • 1.配置环境依赖项
    • 2.安装pip3,numpy,opencv等
    • 3.安装tensorflow,keras,pytorch
    • 4.安装图像工具,否则无法显示图片
    • 5.添加交换空间

opencv,tensorflow,pytorch的安装

本人rk3399pro 安装系统为ubuntu18.04系统。

1.配置环境依赖项

sudo apt-get update 
sudo apt-get install build-essential cmake git pkg-config 
sudo apt-get install libjpeg8-dev libtiff5-dev  libpng-dev 
sudo apt-get install libgtk2.0-dev 
sudo apt-get install libavcodec-dev libavformat-dev libswscale-dev libv4l-dev 
sudo apt-get install libatlas-base-dev gfortran  libhdf5-dev libtbb-dev libeigen3-dev
sudo apt-get install gstreamer1.0-tools gstreamer1.0-alsa gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav 
sudo apt-get install libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libgstreamer-plugins-good1.0-dev libgstreamer-plugins-bad1.0-dev 

2.安装pip3,numpy,opencv等

这里opencv采用apt形式安装安装版本为3.2,如需要安装高版本需要源码编译。

sudo apt-get install python3-dev
sudo apt-get install python3-pip
sudo pip3 install --upgrade pip
sudo pip3 config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple
sudo apt-get install python3-numpy
sudo apt-get install python3-opencv

3.安装tensorflow,keras,pytorch

下面一些whl包,rk3399的github也有下载,这里也贴出网盘地址:

链接:https://pan.baidu.com/s/1a9_Osl4lyHqlzwTSx2YaRA 提取码:x9us

sudo pip3 install h5py
sudo pip3 install tensorflow-1.13.1-cp36-none-linux_aarch64.whl      
sudo pip3 install onnx-1.4.1-cp36-cp36m-linux_aarch64.whl
sudo pip3 install scipy-1.2.0-cp36-cp36m-linux_aarch64.whl
sudp pip3 install keras==2.1.5
sudo apt-get install python3-matplotlib
sudo pip3 install pillow==6.2.0
sudo apt-get install libopenblas-dev cython3 libatlas-dev m4 libblas-dev cmake
pip3 install pyyaml
sudo pip3 install torch-1.1.0a0+7e73783-cp36-cp36m-linux_aarch64.whl
pip3 install torchvision
#安装rknn python的API
sudo pip3 install rknn_toolkit-1.3.0-cp36-cp36m-linux_aarch64.whl

4.安装图像工具,否则无法显示图片

如何是界面情况下,可能会出现无法显示图片的情况,需要装读图软件。

sudo apt-get install imagemagick

5.添加交换空间

rk3399pro内存4G,编译时可能不太够。

mkdir swap
cd swap
# (1024*4000000=4G)
sudo dd if=/dev/zero of=swapfile bs=1024 count=4000000 
sudo mkswap swapfile 
chmod 0600 swapfile 
sudo swapon swapfile

使用结束释放:

swapoff -a

你可能感兴趣的:(RK3399Pro python环境相关配置)