OpenWrt比较好的官方入门文档
https://downloads.openwrt.org/kamikaze/docs/openwrt.html#x1-20001
Contents
1.1 Getting started
1.1.1 Installation
1.1.2 Initial configuration
1.1.3 Failsafe mode
1.2 Configuring OpenWrt
1.2.1 Network
1.2.2 Wireless
1.3 Advanced configuration
1.3.1 Hotplug
1.3.2 Init scripts
1.3.3 Network scripts
2 Development issues
2.1 The build system
2.1.1 Building an image
2.1.2 Creating packages
2.1.3 Creating kernel modules packages
2.1.4 Conventions
2.1.5 Troubleshooting
2.1.6 Using build environments
2.2 Extra tools
2.2.1 Image Builder
2.2.2 SDK
2.3 Adding platform support
2.3.1 Which Operating System does this device run?
2.3.2 Finding and using the manufacturer SDK
2.4 Debugging and debricking
2.4.1 Adding a serial port
2.4.2 JTAG
2.5 Reporting bugs
2.5.1 Using the Trac ticket system
2.6 Submitting patches
2.6.1 How to contribute
2.6.2 Where to listen and talk
2.6.3 Patch Submission Process
Chapter 1
The Router
1.1 Getting started
1.1.1 Installation
1.1.2 Initial configuration
1.1.3 Failsafe mode
1.2 Configuring OpenWrt
1.2.1 Network
The network configuration in Kamikaze is stored in /etc/config/network and is divided into interface configurations. Each interface configuration either refers directly to an ethernet/wifi interface (eth0, wl0, ..) or to a bridge containing multiple interfaces. It looks like this:
option ifname "eth0"
option proto "static"
option ipaddr "192.168.1.1"
option netmask "255.255.255.0"
option gateway "192.168.1.254"
option dns "192.168.1.254"
ifname specifies the Linux interface name. If you want to use bridging on one or more interfaces, set ifname to a list of interfaces and add:
It is possible to use VLAN tagging on an interface simply by adding the VLAN IDs to it, e.g. eth0.1. These can be nested as well.
This sets up a simple static configuration for eth0. proto specifies the protocol used for the interface. The default image usually provides ’none’ ’static’, ’dhcp’ and ’pppoe’. Others can be added by installing additional packages.
When using the ’static’ method like in the example, the options ipaddr and netmask are mandatory, while gateway and dns are optional. You can specify more than one DNS server, separated with spaces.
DHCP currently only accepts ipaddr (IP address to request from the server) and hostname (client hostname identify as) - both are optional.
PPP based protocols (pppoe, pptp, ...) accept these options:
- username
The PPP username (usually with PAP authentication) - password
The PPP password - keepalive
Ping the PPP server (using LCP). The value of this option specifies the maximum number of failed pings before reconnecting. The ping interval defaults to 5, but can be changed by appending "," to the keepalive value - demand
Use Dial on Demand (value specifies the maximum idle time. - server: (pptp)
The remote pptp server IP
For all protocol types, you can also specify the MTU by using the mtu option.
Setting up static routes
You can set up static routes for a specific interface that will be brought up after the interface is configured.
Simply add a config section like this:
option interface lan
option target 1.1.1.0
option netmask 255.255.255.0
option gateway 192.168.1.1
The name for the route section is optional, the interface, target and gateway options are mandatory. Leaving out the netmask option will turn the route into a host route.
Setting up the switch (currently broadcom only)
The switch configuration is set by adding a ’switch’ config section. Example:
option vlan0 "1 2 3 4 5*"
option vlan1 "0 5"
On Broadcom hardware the section name needs to be eth0, as the switch driver does not detect the switch on any other physical device. Every vlan option needs to have the name vlan
- ’*’: Set the default VLAN (PVID) of the Port to the current VLAN
- ’u’: Force the port to be untagged
- ’t’: Force the port to be tagged
The CPU port defaults to tagged, all other ports to untagged. On Broadcom hardware the CPU port is always 5. The other ports may vary with different hardware.
For instance, if you wish to have 3 vlans, like one 3-port switch, 1 port in a DMZ, and another one as your WAN interface, use the following configuration :
option vlan0 "1 2 3 5*"
option vlan1 "0 5"
option vlan2 "4 5"
Three interfaces will be automatically created using this switch layout : eth0.0 (vlan0), eth0.1 (vlan1) and eth0.2 (vlan2). You can then assign those interfaces to a custom network configuration name like lan, wan or dmz for instance.
Setting up IPv6 connectivity
OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static assignment.
If you use PPP, IPv6 will be setup using IP6CP and there is nothing to configure.
To setup an IPv6 tunnel to a tunnel broker, you can install the 6scripts package and edit the /etc/config/6tunnel file and change the settings accordingly :
option tnlifname ’sixbone’
option remoteip4 ’1.0.0.1’
option localip4 ’1.0.0.2’
option localip6 ’2001::DEAD::BEEF::1’
option prefix ’/64’
- ’tnlifname’: Set the interface name of the IPv6 in IPv4 tunnel
- ’remoteip4’: IP address of the remote end to establish the 6in4 tunnel. This address is given by the tunnel broker
- ’localip4’: IP address of your router to establish the 6in4 tunnel. It will usually match your WAN IP address.
- ’localip6’: IPv6 address to setup on your tunnel side This address is given by the tunnel broker
- ’prefix’: IPv6 prefix to setup on the LAN.
Using the same package you can also setup an IPv6 bridged connection :
option bridge ’br6’
By default the script bridges the WAN interface with the LAN interface and uses ebtables to filter anything that is not IPv6 on the bridge.
IPv6 static addressing is also supported using a similar setup as IPv4 but with the ip6 prefixing (when applicable).
option ifname "eth0"
option proto "static"
option ip6addr "fe80::200:ff:fe00:0/64"
option ip6gw "2001::DEAF:BEE:1"
1.2.2 Wireless
The WiFi settings are configured in the file /etc/config/wireless (currently supported on Broadcom, Atheros and mac80211). When booting the router for the first time it should detect your card and create a sample configuration file. By default ’option network lan’ is commented. This prevents unsecured sharing of the network over the wireless interface.
Each wireless driver has its own configuration script in /lib/wifi/driver_name.sh which handles driver specific options and configurations. This script is also calling driver specific binaries like wlc for Broadcom, or hostapd and wpa_supplicant for atheros.
The reason for using such architecture, is that it abstracts the driver configuration.
Generic Broadcom wireless config:
option type "broadcom"
option channel "5"
config wifi-iface
option device "wl0"
# option network lan
option mode "ap"
option ssid "OpenWrt"
option hidden "0"
option encryption "none"
Generic Atheros wireless config:
option type "atheros"
option channel "5"
option hwmode "11g"
config wifi-iface
option device "wifi0"
# option network lan
option mode "ap"
option ssid "OpenWrt"
option hidden "0"
option encryption "none"
Generic mac80211 wireless config:
option type "mac80211"
option channel "5"
config wifi-iface
option device "wlan0"
# option network lan
option mode "ap"
option ssid "OpenWrt"
option hidden "0"
option encryption "none"
Generic multi-radio Atheros wireless config:
option type atheros
option channel 1
config wifi-iface
option device wifi0
# option network lan
option mode ap
option ssid OpenWrt_private
option hidden 0
option encryption none
config wifi-device wifi1
option type atheros
option channel 11
config wifi-iface
option device wifi1
# option network lan
option mode ap
option ssid OpenWrt_public
option hidden 1
option encryption none
A full outline of the wireless configuration file with description of each field:
option type broadcom, atheros, mac80211
option country us, uk, fr, de, etc.
option channel 1-14
option maxassoc 1-128 (broadcom only)
option distance 1-n
option hwmode 11b, 11g, 11a, 11bg (atheros, mac80211)
option rxantenna 0,1,2 (atheros, broadcom)
option txantenna 0,1,2 (atheros, broadcom)
option txpower transmission power in dBm
config wifi-iface
option network the interface you want wifi to bridge with
option device wifi0, wifi1, wifi2, wifiN
option mode ap, sta, adhoc, monitor, or wds
option txpower (deprecated) transmission power in dBm
option ssid ssid name
option bssid bssid address
option encryption none, wep, psk, psk2, wpa, wpa2
option key encryption key
option key1 key 1
option key2 key 2
option key3 key 3
option key4 key 4
option server ip address
option port port
option hidden 0,1
option isolate 0,1
option doth 0,1 (atheros, broadcom)
option wmm 0,1 (atheros, broadcom)
Options for the wifi-device:
- type
The driver to use for this interface. - country
The country code used to determine the regulatory settings. - channel
The wifi channel (e.g. 1-14, depending on your country setting). - maxassoc
Optional: Maximum number of associated clients. This feature is supported only on the broadcom chipset. - distance
Optional: Distance between the ap and the furthest client in meters. This feature is supported only on the atheros chipset. - mode
The frequency band (b, g, bg, a). This feature is only supported on the atheros chipset. - diversity
Optional: Enable diversity for the Wi-Fi device. This feature is supported only on the atheros chipset. - rxantenna
Optional: Antenna identifier (0, 1 or 2) for reception. This feature is supported by atheros and some broadcom chipsets. - txantenna
Optional: Antenna identifier (0, 1 or 2) for emission. This feature is supported by atheros and some broadcom chipsets. - txpower Set the transmission power to be used. The amount is specified in dBm.
Options for the wifi-iface:
- network
Selects the interface section from /etc/config/network to be used with this interface - device
Set the wifi device name. - mode
Operating mode:- ap
Access point mode - sta
Client mode - adhoc
Ad-Hoc mode - monitor
Monitor mode - wds
WDS point-to-point link
- ap
- ssid Set the SSID to be used on the wifi device.
- bssid Set the BSSID address to be used for wds to set the mac address of the other wds unit.
- txpower (Deprecated, set in wifi-device) Set the transmission power to be used. The amount is specified in dBm.
- encryption
Encryption setting. Accepts the following values:- none
- wep
- psk, psk2
WPA(2) Pre-shared Key - wpa, wpa2
WPA(2) RADIUS
- key, key1, key2, key3, key4 (wep, wpa and psk)
WEP key, WPA key (PSK mode) or the RADIUS shared secret (WPA RADIUS mode) - server (wpa)
The RADIUS server ip address - port (wpa)
The RADIUS server port (defaults to 1812) - hidden
0 broadcasts the ssid; 1 disables broadcasting of the ssid - isolate
Optional: Isolation is a mode usually set on hotspots that limits the clients to communicate only with the AP and not with other wireless clients. 0 disables ap isolation (default); 1 enables ap isolation. - doth
Optional: Toggle 802.11h mode. 0 disables 802.11h (default); 1 enables it. - wmm
Optional: Toggle 802.11e mode. 0 disables 802.11e (default); 1 enables it.
Wireless Distribution System WDS is a non-standard mode which will be working between two Broadcom devices for instance but not between a Broadcom and Atheros device.
Unencrypted WDS connections This configuration example shows you how to setup unencrypted WDS connections. We assume that the peer configured as below as the BSSID ca:fe:ba:be:00:01 and the remote WDS endpoint ca:fe:ba:be:00:02 (option bssid field).
option type "broadcom"
option channel "5"
config wifi-iface
option device "wl0"
option network lan
option mode "ap"
option ssid "OpenWrt"
option hidden "0"
option encryption "none"
config wifi-iface
option device "wl0"
option network lan
option mode wds
option ssid "OpenWrt WDS"
option bssid "ca:fe:ba:be:00:02"
Encrypted WDS connections It is also possible to encrypt WDS connections. psk, psk2 and psk+psk2 modes are supported. Configuration below is an example configuration using Pre-Shared-Keys with AES algorithm.
option type broadcom
option channel 5
config wifi-iface
option device "wl0"
option network lan
option mode ap
option ssid "OpenWrt"
option encryption psk2
option key "
config wifi-iface
option device "wl0"
option network lan
option mode wds
option bssid ca:fe:ba:be:00:02
option ssid "OpenWrt WDS"
option encryption psk2
option key "
802.1x configurations OpenWrt supports both 802.1x client and Access Point configurations. 802.1x client is only working with Atheros or mac80211 drivers. Configuration only supports EAP types TLS, TTLS or PEAP.
EAP-TLS
option device "ath0"
option network lan
option ssid OpenWrt
option eap_type tls
option ca_cert "/etc/config/certs/ca.crt"
option priv_key "/etc/config/certs/priv.crt"
option priv_key_pwd "PKCS#12 passphrase"
EAP-PEAP
option device "ath0"
option network lan
option ssid OpenWrt
option eap_type peap
option ca_cert "/etc/config/certs/ca.crt"
option auth MSCHAPV2
option identity username
option password password
Limitations: There are certain limitations when combining modes. Only the following mode combinations are supported:
- Broadcom:
- 1x sta, 0-3x ap
- 1-4x ap
- 1x adhoc
- 1x monitor
WDS links can only be used in pure AP mode and cannot use WEP (except when sharing the settings with the master interface, which is done automatically).
- Atheros:
- 1x sta, 0-Nx ap
- 1-Nx ap
- 1x adhoc
N is the maximum number of VAPs that the module allows, it defaults to 4, but can be changed by loading the module with the maxvaps=N parameter.
Adding a new driver configuration Since we currently only support thread different wireless drivers : Broadcom, Atheros and mac80211, you might be interested in adding support for another driver like Ralink RT2x00, Texas Instruments ACX100/111.
The driver specific script should be placed in /lib/wifi/
- detection of the driver presence
- enabling/disabling the wifi interface(s)
- configuration reading and setting
- third-party programs calling (nas, supplicant)
Each driver script should append the driver to a global DRIVERS variable :
scan_
Example:
local device="$1"
config_get vifs "$device" vifs
for vif in $vifs; do
# check config consistency for wifi-iface sections
done
# check mode combination
}
enable_
Example:
local device="$1"
config_get vifs "$device" vifs
for vif in $vifs; do
# bring up virtual interface belonging to
# the wifi-device "$device"
done
}
disable_
Example:
local device="$1"
# bring down virtual interfaces belonging to
# "$device" regardless of whether they are
# configured or not. Don’t rely on the vifs
# variable at this point
}
detect_
Example:
[ wifi-device = "$(config_get dummydev type)" ] && return 0
cat <
config wifi-device dummydev
option type dummy
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device dummydev
option mode ap
option ssid OpenWrt
EOF
}
1.3 Advanced configuration
Structure of the configuration files
The config files are divided into sections and options/values.
Every section has a type, but does not necessarily have a name. Every option has a name and a value and is assigned to the section it was written under.
Syntax:
option
Every parameter needs to be a single string and is formatted exactly like a parameter for a shell function. The same rules for Quoting and special characters also apply, as it is parsed by the shell.
Parsing configuration files in custom scripts
To be able to load configuration files, you need to include the common functions with:
Then you can use config_load
If you want to use special callbacks for sections and/or options, you need to define the following shell functions before running config_load (after including /etc/functions.sh):
local type="$1"
local name="$2"
# commands to be run for every section
}
option_cb() {
# commands to be run for every option
}
You can also alter option_cb from config_cb based on the section type. This allows you to process every single config section based on its type individually.
config_cb is run every time a new section starts (before options are being processed). You can access the last section through the CONFIG_SECTION variable. Also an extra call to config_cb (without a new section) is generated after config_load is done. That allows you to process sections both before and after all options were processed.
Another way of iterating on config sections is using the config_foreach command.
Syntax:
This command will run the supplied function for every single config section in the currently loaded config. The section name will be passed to the function as argument 1. If the section type is added to the command line, the function will only be called for sections of the given type.
You can access already processed options with the config_get command Syntax:
config_get
# store the value inside the variable
config_get
In busybox ash the three-option config_get is faster, because it does not result in an extra fork, so it is the preferred way.
Additionally you can also modify or add options to sections by using the config_set command.
Syntax:
If a config section is unnamed, an automatically generated name will be assigned internally, e.g. cfg1, cfg2, ...
While it is possible, using unnamed sections through these autogenerated names is strongly discouraged. Use callbacks or config_foreach instead.
1.3.1 Hotplug
1.3.2 Init scripts
Because OpenWrt uses its own init script system, all init scripts must be installed as /etc/init.d/name use /etc/rc.common as a wrapper.
Example: /etc/init.d/httpd
# Copyright (C) 2006 OpenWrt.org
START=50
start() {
[ -d /www ] && httpd -p 80 -h /www -r OpenWrt
}
stop() {
killall httpd
}
as you can see, the script does not actually parse the command line arguments itself. This is done by the wrapper script /etc/rc.common.
start() and stop() are the basic functions, which almost any init script should provide. start() is called when the user runs /etc/init.d/httpd start or (if the script is enabled and does not override this behavior) at system boot time.
Enabling and disabling init scripts is done by running /etc/init.d/name enable or /etc/init.d/name disable. This creates or removes symbolic links to the init script in /etc/rc.d, which is processed by /etc/init.d/rcS at boot time.
The order in which these scripts are run is defined in the variable START in the init script. Changing it requires running /etc/init.d/name enable again.
You can also override these standard init script functions:
- boot()
Commands to be run at boot time. Defaults to start() - restart()
Restart your service. Defaults to stop(); start() - reload()
Reload the configuration files for your service. Defaults to restart()
You can also add custom commands by creating the appropriate functions and referencing them in the EXTRA_COMMANDS variable. Helptext is added in EXTRA_HELP.
Example:
# print the status info
}
EXTRA_COMMANDS="status"
EXTRA_HELP=" status Print the status of the service"
1.3.3 Network scripts
Using the network scripts
To be able to access the network functions, you need to include the necessary shell scripts by running:
include /lib/network # include /lib/network/*.sh
scan_interfaces # read and parse the network config
Some protocols, such as PPP might change the configured interface names at run time (e.g. eth0 => ppp0 for PPPoE). That’s why you have to run scan_interfacesinstead of reading the values from the config directly. After running scan_interfaces, the ’ifname’ option will always contain the effective interface name (which is used for IP traffic) and if the physical device name differs from it, it will be stored in the ’device’ option. That means that running config_get lan ifname after scan_interfaces might not return the same result as running it before.
After running scan_interfaces, the following functions are available:
- find_config interface
looks for a network configuration that includes the specified network interface. - setup_interface interface [config] [protocol]
will set up the specified interface, optionally overriding the network configuration name or the protocol that it uses.
Writing protocol handlers
You can add custom protocol handlers by adding shell scripts to /lib/network. They provide the following two shell functions:
local config="$1"
# change the interface names if necessary
}
setup_interface_
local interface="$1"
local config="$2"
# set up the interface
}
scan_protocolname is optional and only necessary if your protocol uses a custom device, e.g. a tunnel or a PPP device.
Chapter 2
Development issues
2.1 The build system
One of the biggest challenges to getting started with embedded devices is that you cannot just install a copy of Linux and expect to be able to compile a firmware. Even if you did remember to install a compiler and every development tool offered, you still would not have the basic set of tools needed to produce a firmware image. The embedded device represents an entirely new hardware platform, which is most of the time incompatible with the hardware on your development machine, so in a process called cross compiling you need to produce a new compiler capable of generating code for your embedded platform, and then use it to compile a basic Linux distribution to run on your device.
The process of creating a cross compiler can be tricky, it is not something that is regularly attempted and so there is a certain amount of mystery and black magic associated with it. In many cases when you are dealing with embedded devices you will be provided with a binary copy of a compiler and basic libraries rather than instructions for creating your own – it is a time saving step but at the same time often means you will be using a rather dated set of tools. Likewise, it is also common to be provided with a patched copy of the Linux kernel from the board or chip vendor, but this is also dated and it can be difficult to spot exactly what has been modified to make the kernel run on the embedded platform.
2.1.1 Building an image
OpenWrt takes a different approach to building a firmware; downloading, patching and compiling everything from scratch, including the cross compiler. To put it in simpler terms, OpenWrt does not contain any executables or even sources, it is an automated system for downloading the sources, patching them to work with the given platform and compiling them correctly for that platform. What this means is that just by changing the template, you can change any step in the process.As an example, if a new kernel is released, a simple change to one of the Makefiles will download the latest kernel, patch it to run on the embedded platform and produce a new firmware image – there is no work to be done trying to track down an unmodified copy of the existing kernel to see what changes had been made, the patches are already provided and the process ends up almost completely transparent. This does not just apply to the kernel, but to anything included with OpenWrt – It is this one simple understated concept which is what allows OpenWrt to stay on the bleeding edge with the latest compilers, latest kernels and latest applications.
So let’s take a look at OpenWrt and see how this all works.
Download OpenWrt
This article refers to the "Kamikaze" branch of OpenWrt, which can be downloaded via subversion using the following command:
Additionally, there is a trac interface on https://dev.openwrt.org/ which can be used to monitor svn commits and browse the source repository.
The directory structure
There are four key directories in the base:
- tools
- toolchain
- package
- target
tools and toolchain refer to common tools which will be used to build the firmware image, the compiler, and the C library. The result of this is three new directories, build_dir/host, which is a temporary directory for building the target independent tools, build_dir/toolchain-
- build_dir/host
- build_dir/toolchain-
*
package is for exactly that – packages. In an OpenWrt firmware, almost everything is an .ipk, a software package which can be added to the firmware to provide new features or removed to save space. Note that packages are also maintained outside of the main trunk and can be obtained from subversion using the package feeds system:
Those packages can be used to extend the functionality of the build system and need to be symlinked into the main trunk. Once you do that, the packages will show up in the menu for configuration. From kamikaze you would do something like this:
Search results in feed ’packages’:
nmap Network exploration and/or security auditing utility
$ ./scripts/feeds install nmap
To include all packages, issue the following command:
target refers to the embedded platform, this contains items which are specific to a specific embedded platform. Of particular interest here is the "target/linux" directory which is broken down by platform
Both the target and package steps will use the directory "build_dir/
- build_dir/
- dl
Building OpenWrt
While the OpenWrt build environment was intended mostly for developers, it also has to be simple enough that an inexperienced end user can easily build his or her own customized firmware.
Running the command "make menuconfig" will bring up OpenWrt’s configuration menu screen, through this menu you can select which platform you’re targeting, which versions of the toolchain you want to use to build and what packages you want to install into the firmware image. Note that it will also check to make sure you have the basic dependencies for it to run correctly. If that fails, you will need to install some more tools in your local environment before you can begin.
Similar to the linux kernel config, almost every option has three choices, y/m/n which are represented as follows:
- <*> (pressing y)
This will be included in the firmware image
This will be compiled but not included (for later install)- < > (pressing n)
This will not be compiled
After you’ve finished with the menu configuration, exit and when prompted, save your configuration changes.
If you want, you can also modify the kernel config for the selected target system. simply run "make kernel_menuconfig" and the build system will unpack the kernel sources (if necessary), run menuconfig inside of the kernel tree, and then copy the kernel config to target/linux/
To begin compiling the firmware, type "make". By default OpenWrt will only display a high level overview of the compile process and not each individual command.
Example:
make[3] -C toolchain install
make[2] target/compile
make[3] -C target compile
make[4] -C target/utils prepare
[...]
This makes it easier to monitor which step it’s actually compiling and reduces the amount of noise caused by the compile output. To see the full output, run the command "make V=99".
During the build process, buildroot will download all sources to the "dl" directory and will start patching and compiling them in the "build_dir/
2.1.2 Creating packages
One of the things that we’ve attempted to do with OpenWrt’s template system is make it incredibly easy to port software to OpenWrt. If you look at a typical package directory in OpenWrt you’ll find two things:
- package/
/Makefile - package/
/patches - package/
/files
The patches directory is optional and typically contains bug fixes or optimizations to reduce the size of the executable. The package makefile is the important item, provides the steps actually needed to download and compile the package.
The files directory is also optional and typicall contains package specific startup scripts or default configuration files that can be used out of the box with OpenWrt.
Looking at one of the package makefiles, you’d hardly recognize it as a makefile. Through what can only be described as blatant disregard and abuse of the traditional make format, the makefile has been transformed into an object oriented template which simplifies the entire ordeal.
Here for example, is package/bridge/Makefile:
2
3 include $(TOPDIR)/rules.mk
4
5 PKG_NAME:=bridge
6 PKG_VERSION:=1.0.6
7 PKG_RELEASE:=1
8
9 PKG_SOURCE:=bridge-utils-$(PKG_VERSION).tar.gz
10 PKG_SOURCE_URL:=@SF/bridge
11 PKG_MD5SUM:=9b7dc52656f5cbec846a7ba3299f73bd
12 PKG_CAT:=zcat
13
14 PKG_BUILD_DIR:=$(BUILD_DIR)/bridge-utils-$(PKG_VERSION)
15
16 include $(INCLUDE_DIR)/package.mk
17
18 define Package/bridge
19 SECTION:=net
20 CATEGORY:=Base system
21 TITLE:=Ethernet bridging configuration utility
22 URL:=http://bridge.sourceforge.net/
23 endef
24
25 define Package/bridge/description
26 Manage ethernet bridging:
27 a way to connect networks together to form a larger network.
28 endef
29
30 define Build/Configure
31 $(call Build/Configure/Default, \
32 --with-linux-headers="$(LINUX_DIR)" \
33 )
34 endef
35
36 define Package/bridge/install
37 $(INSTALL_DIR) $(1)/usr/sbin
38 $(INSTALL_BIN) $(PKG_BUILD_DIR)/brctl/brctl $(1)/usr/sbin/
39 endef
40
41 $(eval $(call BuildPackage,bridge))
As you can see, there’s not much work to be done; everything is hidden in other makefiles and abstracted to the point where you only need to specify a few variables.
- PKG_NAME
The name of the package, as seen via menuconfig and ipkg - PKG_VERSION
The upstream version number that we are downloading - PKG_RELEASE
The version of this package Makefile - PKG_SOURCE
The filename of the original sources - PKG_SOURCE_URL
Where to download the sources from (no trailing slash), you can add multiple download sources by separating them with a
and a carriage return. - PKG_MD5SUM
A checksum to validate the download - PKG_CAT
How to decompress the sources (zcat, bzcat, unzip) - PKG_BUILD_DIR
Where to compile the package
The PKG_* variables define where to download the package from; @SF is a special keyword for downloading packages from sourceforge. There is also another keyword of @GNU for grabbing GNU source releases. If any of the above mentionned download source fails, the OpenWrt mirrors will be used as source.
The md5sum (if present) is used to verify the package was downloaded correctly and PKG_BUILD_DIR defines where to find the package after the sources are uncompressed into $(BUILD_DIR).
At the bottom of the file is where the real magic happens, "BuildPackage" is a macro set up by the earlier include statements. BuildPackage only takes one argument directly – the name of the package to be built, in this case "bridge". All other information is taken from the define blocks. This is a way of providing a level of verbosity, it’s inherently clear what the contents of the description template in Package/bridge is, which wouldn’t be the case if we passed this information directly as the Nth argument to BuildPackage.
BuildPackage uses the following defines:
Package/
- SECTION
The type of package (currently unused) - CATEGORY
Which menu it appears in menuconfig: Network, Sound, Utilities, Multimedia ... - TITLE
A short description of the package - URL
Where to find the original software - MAINTAINER (optional)
Who to contact concerning the package - DEPENDS (optional)
Which packages must be built/installed before this package. To reference a dependency defined in the same Makefile, use. If defined as an external package, use + . For a kernel version dependency use: @LINUX_2_ - BUILDONLY (optional)
Set this option to 1 if you do NOT want your package to appear in menuconfig. This is useful for packages which are only used as build dependencies.
Package/
A list of config files installed by this package, one file per line.
Build/Prepare (optional):
A set of commands to unpack and patch the sources. You may safely leave this undefined.
Build/Configure (optional):
You can leave this undefined if the source doesn’t use configure or has a normal config script, otherwise you can put your own commands here or use "$(callBuild/Configure/Default,
To make it easier to modify the configure command line, you can either extend or completely override the following variables:
- CONFIGURE_ARGS
Contains all command line arguments (format: –arg 1 –arg 2) - CONFIGURE_VARS
Contains all environment variables that are passed to ./configure (format: NAME="value")
Build/Compile (optional):
How to compile the source; in most cases you should leave this undefined.
As with Build/Configure there are two variables that allow you to override the make command line environment variables and flags:
- MAKE_FLAGS
Contains all command line arguments (typically variable overrides like NAME="value" - MAKE_VARS
Contains all environment variables that are passed to the make command
Build/InstallDev (optional):
If your package provides a library that needs to be made available to other packages, you can use the Build/InstallDev template to copy it into the staging directory which is used to collect all files that other packages might depend on at build time. When it is called by the build system, two parameters are passed to it. $(1) points to the regular staging dir, typically staging_dir/ARCH , while $(2) points to staging_dir/host. The host staging dir is only used for binaries, which are to be executed or linked against on the host and its bin/ subdirectory is included in the PATH which is passed down to the build system processes. Please use $(1) and $(2) here instead of the build system variables $(STAGING_DIR) and $(STAGING_DIR_HOST), because the build system behavior when staging libraries might change in the future to include automatic uninstallation.
Package/
A set of commands to copy files out of the compiled source and into the ipkg which is represented by the $(1) directory. Note that there are currently 4 defined install macros:
- INSTALL_DIR
install -d -m0755 - INSTALL_BIN
install -m0755 - INSTALL_DATA
install -m0644 - INSTALL_CONF
install -m0600
The reason that some of the defines are prefixed by "Package/
After you have created your package/
2.1.3 Creating kernel modules packages
The OpenWrt distribution makes the distinction between two kind of kernel modules, those coming along with the mainline kernel, and the others available as a separate project. We will see later that a common template is used for both of them.
For kernel modules that are part of the mainline kernel source, the makefiles are located in package/kernel/modules/*.mk and they appear under the section "Kernel modules"
For external kernel modules, you can add them to the build system just like if they were software packages by defining a KernelPackage section in the package makefile.
Here for instance the Makefile for the I2C subsytem kernel modules :
2
3 I2CMENU:=I2C Bus
4
5 define KernelPackage/i2c-core
6 TITLE:=I2C support
7 DESCRIPTION:=Kernel modules for i2c support
8 SUBMENU:=$(I2CMENU)
9 KCONFIG:=CONFIG_I2C_CORE CONFIG_I2C_DEV
10 FILES:=$(MODULES_DIR)/kernel/drivers/i2c/*.$(LINUX_KMOD_SUFFIX)
11 AUTOLOAD:=$(call AutoLoad,50,i2c-core i2c-dev)
12 endef
13 $(eval $(call KernelPackage,i2c-core))
To group kernel modules under a common description in menuconfig, you might want to define a
- TITLE
The name of the module as seen via menuconfig - DESCRIPTION
The description as seen via help in menuconfig - SUBMENU
The sub menu under which this package will be seen - KCONFIG
Kernel configuration option dependency. For external modules, remove it. - FILES
Files you want to inlude to this kernel module package, separate with spaces. - AUTOLOAD
Modules that will be loaded automatically on boot, the order you write them is the order they would be loaded.
After you have created your package/kernel/modules/
2.1.4 Conventions
There are a couple conventions to follow regarding packages:
- files
- configuration files follow the convention
.conf - init files follow the convention
.init
- configuration files follow the convention
- patches
- patches are numerically prefixed and named related to what they do
2.1.5 Troubleshooting
If you find your package doesn’t show up in menuconfig, try the following command to see if you get the correct description:
If you’re just having trouble getting your package to compile, there’s a few shortcuts you can take. Instead of waiting for make to get to your package, you can run one of the following:
- make package/
/clean V=99 - make package/
/install V=99
Another nice trick is that if the source directory under build_dir/
Other useful targets include:
- make package/
/prepare V=99 - make package/
/compile V=99 - make package/
/configure V=99
2.1.6 Using build environments
OpenWrt provides a means of building images for multiple configurations which can use multiple targets in one single checkout. These environments store a copy of the .config file generated by make menuconfig and the contents of the ./files folder. The script ./scripts/env is used to manage these environments, it uses git (which needs to be installed on your system) as backend for version control.
The command
produces a short help text with a list of commands.
To create a new environment named current, run the following command
This will move your .config file and ./files (if it exists) to the env/ subdirectory and create symlinks in the base folder.
After running make menuconfig or changing things in files/, your current state will differ from what has been saved before. To show these changes, use:
If you want to save these changes, run:
If you want to revert your changes to the previously saved copy, run:
If you want, you can now create a second environment using the new command. It will ask you whether you want to make it a clone of the current environment (e.g. for minor changes) or if you want to start with a clean version (e.g. for selecting a new target).
To switch to a different environment (e.g. test1), use:
To rename the current branch to a new name (e.g. test2), use:
If you want to get rid of environment switching and keep everything in the base directory again, use:
2.2 Extra tools
2.2.1 Image Builder
2.2.2 SDK
2.3 Adding platform support
Linux is now one of the most widespread operating system for embedded devices due to its openess as well as the wide variety of platforms it can run on. Many manufacturer actually use it in firmware you can find on many devices: DVB-T decoders, routers, print servers, DVD players ... Most of the time the stock firmware is not really open to the consumer, even if it uses open source software.
You might be interested in running a Linux based firmware for your router for various reasons: extending the use of a network protocol (such as IPv6), having new features, new piece of software inside, or for security reasons. A fully open-source firmware is de-facto needed for such applications, since you want to be free to use this or that version of a particular reason, be able to correct a particular bug. Few manufacturers do ship their routers with a Sample Development Kit, that would allow you to create your own and custom firmware and most of the time, when they do, you will most likely not be able to complete the firmware creation process.
This is one of the reasons why OpenWrt and other firmware exists: providing a version independent, and tools independent firmware, that can be run on various platforms, known to be running Linux originally.
2.3.1 Which Operating System does this device run?
There is a lot of methods to ensure your device is running Linux. Some of them do need your router to be unscrewed and open, some can be done by probing the device using its external network interfaces.
Operating System fingerprinting and port scanning
A large bunch of tools over the Internet exists in order to let you do OS fingerprinting, we will show here an example using nmap:
Starting Nmap 4.20 ( http://insecure.org ) at 2007-01-08 11:05 CET
Interesting ports on 192.168.2.1:
Not shown: 1693 closed ports
PORT STATE SERVICE
22/tcp open ssh
23/tcp open telnet
53/tcp open domain
80/tcp open http
MAC Address: 00:13:xx:xx:xx:xx (Cisco-Linksys)
Device type: broadband router
Running: Linksys embedded
OS details: Linksys WRT54GS v4 running OpenWrt w/Linux kernel 2.4.30
Network Distance: 1 hop
nmap is able to report whether your device uses a Linux TCP/IP stack, and if so, will show you which Linux kernel version is probably runs. This report is quite reliable and it can make the distinction between BSD and Linux TCP/IP stacks and others.
Using the same tool, you can also do port scanning and service version discovery. For instance, the following command will report which IP-based services are running on the device, and which version of the service is being used:
Starting Nmap 4.20 ( http://insecure.org ) at 2007-01-08 11:06 CET
Interesting ports on 192.168.2.1:
Not shown: 1693 closed ports
PORT STATE SERVICE VERSION
22/tcp open ssh Dropbear sshd 0.48 (protocol 2.0)
23/tcp open telnet Busybox telnetd
53/tcp open domain ISC Bind dnsmasq-2.35
80/tcp open http OpenWrt BusyBox httpd
MAC Address: 00:13:xx:xx:xx:xx (Cisco-Linksys)
Service Info: Device: WAP
The web server version, if identified, can be determining in knowing the Operating System. For instance, the BOA web server is typical from devices running an open-source Unix or Unix-like.
Wireless Communications Fingerprinting
Although this method is not really known and widespread, using a wireless scanner to discover which OS your router or Access Point run can be used. We do not have a clear example of how this could be achieved, but you will have to monitor raw 802.11 frames and compare them to a very similar device running a Linux based firmware.
Web server security exploits
The Linksys WRT54G was originally hacked by using a "ping bug" discovered in the web interface. This tip has not been fixed for months by Linksys, allowing people to enable the "boot_wait" helper process via the web interface. Many web servers used in firmwares are open source web server, thus allowing the code to be audited to find an exploit. Once you know the web server version that runs on your device, by using nmap -sV or so, you might be interested in using exploits to reach shell access on your device.
Native Telnet/SSH access
Some firmwares might have restricted or unrestricted Telnet/SSH access, if so, try to log in with the web interface login/password and see if you can type in some commands. This is actually the case for some Broadcom BCM963xx based firmwares such as the one in Neuf/Cegetel ISP routers, Club-Internet ISP CI-Box and many others. Some commands, like cat might be left here and be used to determine the Linux kernel version.
Analysing a binary firmware image
You are very likely to find a firmware binary image on the manufacturer website, even if your device runs a proprietary operating system. If so, you can download it and use an hexadecimal editor to find printable words such as vmlinux, linux, ramdisk, mtd and others.
Some Unix tools like hexdump or strings can be used to analyse the firmware. Below there is an example with a binary firmware found other the Internet:
00000000 46 49 52 45 32 2e 35 2e 30 00 00 00 00 00 00 00 |FIRE2.5.0.......|
00000010 00 00 00 00 31 2e 30 2e 30 00 00 00 00 00 00 00 |....1.0.0.......|
00000020 00 00 00 00 00 00 00 38 00 43 36 29 00 0a e6 dc |.......8.C6)..??|
00000030 54 49 44 45 92 89 54 66 1f 8b 08 08 f8 10 68 42 |TIDE..Tf....?.hB|
00000040 02 03 72 61 6d 64 69 73 6b 00 ec 7d 09 bc d5 d3 |..ramdisk.?}.???|
00000050 da ff f3 9b f7 39 7b ef 73 f6 19 3b 53 67 ea 44 |???.?9{?s?.;Sg?D|
Scroll over the firmware to find printable words that can be significant.
Amount of flash memory
Linux can hardly fit in a 2MB flash device, once you have opened the device and located the flash chip, try to find its characteristics on the Internet. If your flash chip is a 2MB or less device, your device is most likely to run a proprietary OS such as WindRiver VxWorks, or a custom manufacturer OS like Zyxel ZynOS.
OpenWrt does not currently run on devices which have 2MB or less of flash memory. This limitation will probably not be worked around since those devices are most of the time micro-routers, or Wireless Access Points, which are not the main OpenWrt target.
Pluging a serial port
By using a serial port and a level shifter, you may reach the console that is being shown by the device for debugging or flashing purposes. By analysing the output of this device, you can easily notice if the device uses a Linux kernel or something different.
2.3.2 Finding and using the manufacturer SDK
Once you are sure your device run a Linux based firmware, you will be able to start hacking on it. If the manufacturer respected the GPL, it will have released a Sample Development Kit with the device.
GPL violations
Some manufacturers do release a Linux based binary firmware, with no sources at all. The first step before doing anything is to read the license coming with your device, then write them about this lack of Open Source code. If the manufacturer answers you they do not have to release a SDK containing Open Source software, then we recommend you get in touch with the gpl-violations.org community.
You will find below a sample letter that can be sent to the manufacturer:
Miss, Mister,
I am using a
In conformance to the GPL license, you have to release the following sources:
- complete toolchain that made the kernel and applications be compiled (gcc, binutils, libc)
- tools to build a custom firmware (mksquashfs, mkcramfs ...)
- kernel sources with patches to make it run on this specific hardware, this does not include binary drivers
Thank you very much in advance for your answer.
Best regards,
Using the SDK
Once the SDK is available, you are most likely not to be able to build a complete or functional firmware using it, but parts of it, like only the kernel, or only the root filesystem. Most manufacturers do not really care releasing a tool that do work every time you uncompress and use it.
You should anyway be able to use the following components:
- kernel sources with more or less functional patches for your hardware
- binary drivers linked or to be linked with the shipped kernel version
- packages of the toolchain used to compile the whole firmware: gcc, binutils, libc or uClibc
- binary tools to create a valid firmware image
Your work can be divided into the following tasks:
- create a clean patch of the hardware specific part of the linux kernel
- spot potential kernel GPL violations especially on netfilter and USB stack stuff
- make the binary drivers work, until there are open source drivers
- use standard a GNU toolchain to make working executables
- understand and write open source tools to generate a valid firmware image
Creating a hardware specific kernel patch
Most of the time, the kernel source that comes along with the SDK is not really clean, and is not a standard Linux version, it also has architecture specific fixes backported from the CVS or the git repository of the kernel development trees. Anyway, some parts can be easily isolated and used as a good start to make a vanilla kernel work your hardware.
Some directories are very likely to have local modifications needed to make your hardware be recognized and used under Linux. First of all, you need to find out the linux kernel version that is used by your hardware, this can be found by editing the linux/Makefile file.
VERSION = 2
PATCHLEVEL = x
SUBLEVEL = y
EXTRAVERSION = z
NAME=A fancy name
So now, you know that you have to download a standard kernel tarball at kernel.org that matches the version being used by your hardware.
Then you can create a diff file between the two trees, especially for the following directories:
diff -urN linux-2.x.x/include/ linux-2.x.x-modified/include > 02-includes.patch
diff -urN linux-2.x.x/drivers/ linux-2.x.x-modified/drivers > 03-drivers.patch
This will constitute a basic set of three patches that are very likely to contain any needed modifications that has been made to the stock Linux kernel to run on your specific device. Of course, the content produced by the diff -urN may not always be relevant, so that you have to clean up those patches to only let the "must have" code into them.
The first patch will contain all the code that is needed by the board to be initialized at startup, as well as processor detection and other boot time specific fixes.
The second patch will contain all useful definitions for that board: addresses, kernel granularity, redefinitions, processor family and features ...
The third patch may contain drivers for: serial console, ethernet NIC, wireless NIC, USB NIC ... Most of the time this patch contains nothing else than "glue" code that has been added to make the binary driver work with the Linux kernel. This code might not be useful if you plan on writing drivers from scratch for this hardware.
Using the device bootloader
The bootloader is the first program that is started right after your device has been powered on. This program, can be more or less sophisticated, some do let you do network booting, USB mass storage booting ... The bootloader is device and architecture specific, some bootloaders were designed to be universal such as RedBoot or U-Boot so that you can meet those loaders on totally different platforms and expect them to behave the same way.
If your device runs a proprietary operating system, you are very likely to deal with a proprietary boot loader as well. This may not always be a limitation, some proprietary bootloaders can even have source code available (i.e : Broadcom CFE).
According to the bootloader features, hacking on the device will be more or less easier. It is very probable that the bootloader, even exotic and rare, has a documentation somewhere over the Internet. In order to know what will be possible with your bootloader and the way you are going to hack the device, look over the following features :
- does the bootloader allow net booting via bootp/DHCP/NFS or tftp
- does the bootloader accept loading ELF binaries ?
- does the bootloader have a kernel/firmware size limitation ?
- does the bootloader expect a firmware format to be loaded with ?
- are the loaded files executed from RAM or flash ?
Net booting is something very convenient, because you will only have to set up network booting servers on your development station, and keep the original firmware on the device till you are sure you can replace it. This also prevents your device from being flashed, and potentially bricked every time you want to test a modification on the kernel/filesystem.
If your device needs to be flashed every time you load a firmware, the bootlader might only accept a specific firmware format to be loaded, so that you will have to understand the firmware format as well.
Making binary drivers work
As we have explained before, manufacturers do release binary drivers in their GPL tarball. When those drivers are statically linked into the kernel, they become GPL as well, fortunately or unfortunately, most of the drivers are not statically linked. This anyway lets you a chance to dynamically link the driver with the current kernel version, and try to make them work together.
This is one of the most tricky and grey part of the fully open source projects. Some drivers require few modifications to be working with your custom kernel, because they worked with an earlier kernel, and few modifications have been made to the kernel in-between those versions. This is for instance the case with the binary driver of the Broadcom BCM43xx Wireless Chipsets, where only few differences were made to the network interface structures.
Some general principles can be applied no matter which kernel version is used in order to make binary drivers work with your custom kernel:
- turn on kernel debugging features such as:
- CONFIG_DEBUG_KERNEL
- CONFIG_DETECT_SOFTLOCKUP
- CONFIG_DEBUG_KOBJECT
- CONFIG_KALLSYMS
- CONFIG_KALLSYMS_ALL
- link binary drivers when possible to the current kernel version
- try to load those binary drivers
- catch the lockups and understand them
Most of the time, loading binary drivers will fail, and generate a kernel oops. You can know the last symbol the binary drivers attempted to use, and see in the kernel headers file, if you do not have to move some structures field before or after that symbol in order to keep compatibily with both the binary driver and the stock kernel drivers.
Understanding the firmware format
You might want to understand the firmware format, even if you are not yet capable of running a custom firmware on your device, because this is sometimes a blocking part of the flashing process.
A firmware format is most of the time composed of the following fields:
- header, containing a firmware version and additional fields: Vendor, Hardware version ...
- CRC32 checksum on either the whole file or just part of it
- Binary and/or compressed kernel image
- Binary and/or compressed root filesystem image
- potential garbage
Once you have figured out how the firmware format is partitioned, you will have to write your own tool that produces valid firmware binaries. One thing to be very careful here is the endianness of either the machine that produces the binary firmware and the device that will be flashed using this binary firmware.
Writing a flash map driver
The flash map driver has an important role in making your custom firmware work because it is responsible of mapping the correct flash regions and associated rights to specific parts of the system such as: bootloader, kernel, user filesystem.
Writing your own flash map driver is not really a hard task once you know how your firmware image and flash is structured. You will find below a commented example that covers the case of the device where the bootloader can pass to the kernel its partition plan.
First of all, you need to make your flash map driver be visible in the kernel configuration options, this can be done by editing the file linux/drivers/mtd/maps/Kconfig:
tristate "Device Flash device"
depends on ARCHITECTURE && DEVICE
help
Flash memory access on DEVICE boards. Currently only works with
Bootloader Foo and Bootloader Bar.
Then add your source file to the linux/drivers/mtd/maps/Makefile, so that it will be compiled along with the kernel.
You can then write the kernel driver itself, by creating a linux/drivers/mtd/maps/device-flash.c C source file.
#include
#include
#include
#include
#include
#include
#include
// Put some flash map definitions here:
#define WINDOW_ADDR 0x1FC00000 /* Real address of the flash */
#define WINDOW_SIZE 0x400000 /* Size of flash */
#define BUSWIDTH 2 /* Buswidth */
static void __exit device_mtd_cleanup(void);
static struct mtd_info *device_mtd_info;
static struct map_info devicd_map = {
.name = "device",
.size = WINDOW_SIZE,
.bankwidth = BUSWIDTH,
.phys = WINDOW_ADDR,
};
static int __init device_mtd_init(void)
{
// Display that we found a flash map device
printk("device: 0x\%08x at 0x\%08x\n", WINDOW_SIZE, WINDOW_ADDR);
// Remap the device address to a kernel address
device_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
// If impossible to remap, exit with the EIO error
if (!device_map.virt) {
printk("device: Failed to ioremap\n");
return -EIO;
}
// Initialize the device map
simple_map_init(&device_map);
/* MTD informations are closely linked to the flash map device
you might also use "jedec_probe" "amd_probe" or "intel_probe" */
device_mtd_info = do_map_probe("cfi_probe", &device_map);
if (device_mtd_info) {
device_mtd_info->owner = THIS_MODULE;
int parsed_nr_parts = 0;
// We try here to use the partition schema provided by the bootloader specific code
if (parsed_nr_parts == 0) {
int ret = parse_bootloader_partitions(device_mtd_info, &parsed_parts, 0);
if (ret > 0) {
part_type = "BootLoader";
parsed_nr_parts = ret;
}
}
add_mtd_partitions(devicd_mtd_info, parsed_parts, parsed_nr_parts);
return 0;
}
iounmap(device_map.virt);
return -ENXIO;
}
// This function will make the driver clean up the MTD device mapping
static void __exit device_mtd_cleanup(void)
{
// If we found a MTD device before
if (device_mtd_info) {
// Delete every partitions
del_mtd_partitions(device_mtd_info);
// Delete the associated map
map_destroy(device_mtd_info);
}
// If the virtual address is already in use
if (device_map.virt) {
// Unmap the physical address to a kernel space address
iounmap(device_map.virt);
// Reset the structure field
device_map.virt = 0;
}
}
// Macros that indicate which function is called on loading/unloading the module
module_init(device_mtd_init);
module_exit(device_mtd_cleanup);
// Macros defining license and author, parameters can be defined here too.
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Me, myself and I
2.4 Debugging and debricking
2.4.1 Adding a serial port
2.4.2 JTAG
2.5 Reporting bugs
2.5.1 Using the Trac ticket system
OpenWrt as an open source software opens its development to the community by having a publicly browseable subversion repository. The Trac software which comes along with a Subversion frontend, a Wiki and a ticket reporting system is used as an interface between developers, users and contributors in order to make the whole development process much easier and efficient.
We make distinction between two kinds of people within the Trac system:
- developers, able to report, close and fix tickets
- reporters, able to add a comment, patch, or request ticket status
Opening a ticket
A reporter might want to open a ticket for the following reasons:
- a bug affects a specific hardware and/or software and needs to be fixed
- a specific software package would be seen as part of the official OpenWrt repository
- a feature should be added or removed from OpenWrt
Regarding the kind of ticket that is open, a patch is welcome in those cases:
- new package to be included in OpenWrt
- fix for a bug that works for the reporter and has no known side effect
- new features that can be added by modifying existing OpenWrt files
Once the ticket is open, a developer will take care of it, if so, the ticket is marked as "accepted" with the developer name. You can add comments at any time to the ticket, even when it is closed.
Closing a ticket
A ticket might be closed by a developer because:
- the problem is already fixed (wontfix)
- the problem described is not judged as valid, and comes along with an explanation why (invalid)
- the developers know that this bug will be fixed upstream (wontfix)
- the problem is very similar to something that has already been reported (duplicate)
- the problem cannot be reproduced by the developers (worksforme)
At the same time, the reporter may want to get the ticket closed since he is not longer able to trigger the bug, or found it invalid by himself.
When a ticket is closed by a developer and marked as "fixed", the comment contains the subversion changeset which corrects the bug.
2.6 Submitting patches
2.6.1 How to contribute
OpenWrt is constantly being improved. We’d like as many people to contribute to this as we can get. If you find a change useful, by all means try to get it incorporated into the project. This should improve OpenWrt and it should help carry your changes forward into future versions
This section tries to lay out a procedure to enable people to submit patches in a way that is most effective for all concerned.
It is important to do all these steps repeatedly:
- listen to what other people think.
- talk explaining what problem you are addressing and your proposed solution.
- do write useful patches including documentation.
- test. test. test.
2.6.2 Where to listen and talk
- google to find things related to your problem
- Mailing lists: http://lists.openwrt.org/
- Wiki: check the wiki: http://wiki.openwrt.org/OpenWrtDocs
- Forum: http://forum.openwrt.org/
- IRC: irc.freenode.net, channels #openwrt and #openwrt-devel
- TRAC: https://dev.openwrt.org/ the issue/bug/change tracking system
It is often best to document what you are doing before you do it. The process of documentation often exposes possible improvements. Keep your documentation up to date.
2.6.3 Patch Submission Process
- Use git or svn to create a patch. Creating patches manually with diff -urN also works, but is usually unnecessary.
- Send a mail to [email protected] with the following contents:
- [PATCH]
- (optional) a longer description of your patch in the message body
- Signed-off-by: Your name
- Your actual patch, inline, not word wrapped or whitespace mangled.
- [PATCH]
- Please read http://kerneltrap.org/Linux/Email_Clients_and_Patches to find out how to make sure your email client doesn’t destroy your patch.
- Please use your real name and email address in the Signed-off-by line, following the same guidelines as in the Linux Kernel patch submission guidelines
- Example of a properly formatted patch submission:
http://lists.openwrt.org/pipermail/openwrt-devel/2007-November/001334.html