Two手揣兜
Two手揣兜

OGG参数详解

http://blog.itpub.net/26442936/sid-172198-list-1/
http://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters.htm#GWURF394


Oracle GoldenGate sample parameter files
 总结：
一直以来对oracle goldengate许多参数比较疑惑，正好在MOS看到这个文章，转载到BLOG，以备参考
 
Objective: This paper provides sample example of Oracle GoldenGate parameter files that can be used to configure Oracle GoldenGate replication setup inline with recommended best practices. The example is generic and can serve as a starting point for a more customized Oracle GoldenGate implementation
Process name: Manager
Description: Manager is GoldenGate's parent process and is responsible for the management of GoldenGate processes, resources, user interface, and the reporting of thresholds and errors.
Manager parameter file (Sample)
 
-- Manager port number
PORT
 
-- As a Manager parameter, PURGEOLDEXTRACTS allows to manage trail
-- files in a centralized fashion and take into account multiple
-- processes.
PURGEOLDEXTRACTS , USECHECKPOINTS, MINKEEPHOURS <"x" hours> MINKEEPFILES <"y" number of files>
 
-- Start one or more Extract and Replicat processes automatically after -- they fail. AUTORESTART provides fault tolerance when something
-- temporary interferes with a process, such as intermittent network
-- outages or programs that interrupt access to transaction logs.
AUTORESTART EXTRACT *, RETRIES , WAITMINUTES , RESETMINUTES
 
--This is to specify a lag threshold that is considered critical,
--and to force a warning message to the error log. Lagreport parameter
--specifies the interval at which manager checks for extract / replicat --lag.
LAGREPORTMINUTES
LAGCRITICALMINUTES
Process name: Extract
Description: The Extract process captures either full data records or transactional data changes, depending on configuration parameters, and then sends the data to a target system to be applied to target tables or processed further by another process, such as a load utility.
 
Extract parameter file (Sample)
 
-- ###################################################################
-- Runcmd: ADD EXTRACT , TRANLOG, BEGIN NOW
-- Runcmd: ADD EXTTRAIL ,
-- EXTRACT , Megabytes
-- Name of the extract process. Limited to 8 charecters.
EXTRACT
 
-- DB environment settings
SETENV (ORACLE_HOME = "" )
SETENV (ORACLE_SID="")
 
-- OGG database user login
USERID password , encryptkey default
 
-- Local trail info
EXTTRAIL
 
-- Prevent data looping. This is generally used in bi-directional
-- configuration
TRANLOGOPTIONS EXCLUDEUSER
 
-- ASM login info  (Oracle only. If db is using ASM)
TRANLOGOPTIONS ASMUSER sys@, ASMPASSWORD , encryptkey default
 
--DBLOGREADER enables Extract to use a read buffer size of up to 4 MB --- in size. A larger buffer may improve the performance of Extract when -- redo rate is high. The db has to be 10.2.0.5 or higher to use
-- this feature. If DBLOGREADER parameter is in place then the above
-- ASMUSER parameter should not be used.
TRANLOGOPTIONS DBLOGREADER, DBLOGREADER BUFSIZE [x], BUFSIZE [y]
 
--DDL replication parameters
DDL INCLUDE ALL, EXCLUDE OBJNAME ". "
DDLOPTIONS ADDTRANDATA
 
--Discard file location.
DISCARDFILE , APPEND Megabytes
 
-- Use the DISCARDROLLOVER parameter to set a schedule for aging discard --files.
DISCARDROLLOVER AT on
 
-- Use the REPORTROLLOVER parameter to force report files to age on a
-- regular schedule, instead of when a process starts
REPORTROLLOVER AT on
 
-- Use the REPORTCOUNT parameter to report a count of transaction
-- records that Extract or Replicat processed since startup
REPORTCOUNT EVERY HOURS, RATE
 
-- Use the FETCHOPTIONS parameter to control certain aspects of the way -- that GoldenGate fetches data
FETCHOPTIONS, USESNAPSHOT, NOUSELATESTVERSION, MISSINGROW REPORT
STATOPTIONS REPORTFETCH
 
-- Warn for long running txns
WARNLONGTRANS H, CHECKINTERVAL m
-- List of tables
Table .;
..
 
Pump (Extract) Parameter file (Sample)
 
-- Runcmd: ADD EXTRACT , EXTTRAILSOURCE -- Path/two character trail id>
-- Runcmd: ADD RMTTRAIL ,
-- EXTRACT , Megabytes
-- Name of the Pump process. Limited to 8 charecters.
EXTRACT
 
-- Oracle environment settings
SETENV (ORACLE_HOME = "" )
SETENV (ORACLE_SID="")
 
-- In passthru mode GoldenGate pump process cascades captured data from -- source to target without logging in to the source database
Passthru
 
-- Remote host and remort manager port to write trail
RMTHOST , MGRPORT
 
-- Remote trail info
RMTTRAIL
 
--Discard file location.
DISCARDFILE , APPEND Megabytes
 
-- Use the DISCARDROLLOVER parameter to set a schedule for aging discard --files.
DISCARDROLLOVER AT on
 
-- Use the REPORTROLLOVER parameter to force report files to age on a
-- Regular schedule, instead of when a process starts
REPORTROLLOVER AT on
 
-- Use the REPORTCOUNT parameter to report a count of transaction
-- Records that Extract or Replicat processed since startup
REPORTCOUNT EVERY HOURS, RATE
 
-- List of tables
Table .
;
 
Process name: Replicat
Description: The Replicat process reads data extracted by the Extract process and applies it to target tables or prepares it for use by another application, such as a load application.
Replicat parameter file
###################################################################
-- Runcmd: ADD REPLICAT , EXTTRAIL
-- Name of the replicat process. Limited to 8 charecters.
REPLICAT
 
-- Oracle environment settings
SETENV (ORACLE_HOME = "" )
SETENV (ORACLE_SID= "")
SETENV (NLS_LANG = ="")
 
-- OGG database user login
USERID password , encryptkey default
 
 
--Discard file location.
DISCARDFILE , APPEND Megabytes
 
--DDL replication parameters
DDL INCLUDE ALL, EXCLUDE OBJNAME "."
DDLOPTIONS REPORT
 
-- The following parameter speeds up replicat processing rate. The
-- parameter alters the replicat oracle session to not wait for commits -- to be persisted to the redo.
SQLEXEC "ALTER SESSION SET COMMIT_WRITE = NOWAIT"
 
-- Use the BATCHSQL parameter to increase the performance of Replicat. -- BATCHSQL causes Replicat to organize similar SQL statements into arrays and apply -- them at an accelerated rate.
BATCHSQL
 
-- Use the DISCARDROLLOVER parameter to set a schedule for aging discard --files.
DISCARDROLLOVER AT on
 
-- Use the REPORTROLLOVER parameter to force report files to age on a
-- regular schedule, instead of when a process starts
REPORTROLLOVER AT on
 
-- Use the REPORTCOUNT parameter to report a count of transaction
-- records that Extract or Replicat processed since startup
REPORTCOUNT EVERY HOURS, RATE
 
 
-- List of tables (MAP statements)
MAP .
, TARGET .;
..
..
 
GLOBALS file
The GLOBALS file stores parameters that relate to the GoldenGate instance as a whole, as opposed to runtime parameters for a specific process.
 
Globals parameter file
 
-- Specifies the name of the Manager process when it is installed as a Windows service.
MGRSERVNAME
 
-- Specifies a default checkpoint table
CHECKPOINTTABLE
 
-- Specifies the name of the schema that contains the database objects that support DDL
-- synchronization for Oracle
GGSCHEMA
 
-- Specifies a non-default name for the DDL history table that supports DDL
-- synchronization for Oracle.
DDLTABLE

 
-- Specifies a non-default name for the DDL marker table that supports DDL
-- synchronization for Oracle
MARKERTABLE







GoldenGate 基本参数含义




1. edit params命令
2. DBLOGIN USERID , PASSWORD
3. ADD TRANDATA命令
4. ADD EXTRACT 命令
5. ADD EXTTRAIL命令
6. EXTFILESOURCE 意思
7. ADD RMTTRAIL命令
8. ADD REPLICAT命令
9. PURGEOLDEXTRACTS
10. AUTOSTART参数
11. DYNAMICRESOLUTION
12. SOURCEDB
13. PASSTHRU
14. ASSUMETARGETDEFS
15. REPERROR
16. 使用通配符




(1) Overview of Extract
The Extract process runs on the source system and is the capture mechanism of
GoldenGate. You can configure Extract in one of the following ways:
● Initial loads: For initial data loads, Extract extracts a current set of data directly from
their source objects.
● Change synchronization: To keep source data synchronized with another set of data,
Extract extracts transactional changes made to data (inserts, updates, and deletes)
after the initial synchronization has taken place. DDL changes and sequences are also
extracted, if supported for the type of database being used.


(2) Overview of Replicat
The Replicat process runs on the target system. Replicat reads extracted data changes and
DDL changes (if supported) that are specified in the Replicat configuration, and then it
replicates them to the target database. You can configure Replicat in one of the following
ways:


(3) Overview of trails
To support the continuous extraction and replication of supported database changes,
GoldenGate stores those changes temporarily on disk in a series of files called a trail. A
trail can exist on the source or target system, or on an intermediary system, depending on
how you configure GoldenGate. On the local system it is known as an extract trail (or local
trail). On a remote system it is known as a remote trail.


By using a trail for storage, GoldenGate supports data accuracy and fault tolerance (see
“Overview of checkpoints” on page 28). The use of a trail also allows extraction and
replication activities to occur independently of each other. With these processes separated,
you have more choices for how data is delivered. For example, instead of extracting and
replicating changes continuously, you could extract changes continuously but store them
in the trail for replication to the target later, whenever the target application needs them.










1. edit params命令
==================
Use EDIT PARAMS to create or change a parameter file. By default,
this command launches Microsoft Notepad on Windows or the vi editor
on UNIX systems. You can change the editor with the SET EDITOR
command.


Syntax:
EDIT PARAMS {MGR | | }


MGR
Opens a parameter file for the Manager process.



Opens a parameter file for the specified Extract or Replicat group.



Opens the specified file. Use the full path name.


Example 1: EDIT PARAMS finance
Example 2: EDIT PARAMS c:\lpparms\replp.prm






GGSCI (testdb11.zhyhl.com) 6> 






PORT
PORT defines the port number on which Manager runs on the local system. The default port
is 7809. You must specify either the default port or another port. The port must be
unreserved and unrestricted. GGSCI uses this port to request Manager to start processes.
The Extract process uses this port to request Manager to start a remote Collector process
or an initial-load Replicat process. PORT is the only required Manager parameter.






Autostart parameters
Use the AUTOSTART parameter to start Extract and Replicat processes when Manager starts.
This can be useful, for example, if you want GoldenGate activities to begin immediately
when you start the system, assuming Manager is part of the startup routine. You can use
multiple AUTOSTART statements in the same parameter file.
AUTOSTART {ER | EXTRACT | REPLICAT} {group name | wildcard}


Use the AUTORESTART parameter to start Extract and Replicat processes again after
abnormal termination.
AUTORESTART {ER | EXTRACT | REPLICAT} {group name | wildcard}
[, RETRIES ]
[, WAITMINUTES ]
[, RESETMINUTES ]










2. DBLOGIN USERID , PASSWORD
=============================================


dblogin userid test,password test


DBLOGIN USERID , PASSWORD
Where: is a database user who has privilege to create triggers or enable tablelevel
supplemental logging, and is that user’s password.






3. ADD TRANDATA命令
===================


Use the ADD TRANDATA command in GGSCI to configure the database to log the key values
whenever it logs a row change, so that they are available to GoldenGate in the redo record.
By default, the database only logs column values that are changed.


ADD TRANDATA must be performed before you start GoldenGate processing.




add trandata test.*


To capture key values with ADD TRANDATA
ADD TRANDATA
[, COLS ] [, NOKEY] [, USETRIGGER]


Where:
?
is the owner and name of the table. You can use a wildcard for the table
name but not the owner name.
? COLS logs non-key columns that are specified with KEYCOLS.
? NOKEY prevents the logging of the primary key or unique key. Requires using a
KEYCOLS clause in TABLE or MAP and logging the KEYCOLS columns with COL.
? USETRIGGER forces GoldenGate to install an update trigger instead of a supplemental
log group. Required only if 8i compatibility is enabled on a 9i or later database.






4. ADD EXTRACT 命令
===================


add extract extzq, tranlog, begin now




解释：
Use ADD EXTRACT to create an Extract group. Unless a SOURCEISTABLE
task is specified, this command creates checkpoints so that 
processing continuity is maintained from run to run.


ADD EXTRACT
{, SOURCEISTABLE |
   , GGSLOG |
   , TRANLOG [bsds name> |
   , VAM |
   , EXTFILESOURCE |
   , EXTTRAILSOURCE |
   , VAMTRAILSOURCE }
{, BEGIN | 
   , EXTSEQNO , EXTRBA |
   , LOGNUM , LOGPOS |
   , LSN |
   , EXTRBA |
   , EOF | LSN |
   , PAGE , ROW }
[, THREADS ]
[, PASSIVE]
[, PARAMS ]
[, REPORT ]
[, DESC   ]




TRANLOG
Specifies the transaction log as the data source. Use this option 
for log-based extraction. TRANLOG requires either the BEGIN or EXTSEQNO
and EXTRBA options.




The following are service options:


BEGIN
Specifies a timestamp in the data source at which to begin processing.
Valid values:
* NOW
* A date and time in the format of:
  yyyy-mm-dd [hh:mi:[ss[.cccccc]]]




Example 2:
The following creates an Extract group named  finance  that extracts
database changes from the transaction logs. Extraction starts with
records generated at the time when the group was created.


ADD EXTRACT finance, TRANLOG, BEGIN NOW








5. ADD EXTTRAIL命令
====================


add exttrail  /home/test/ggs95/dirdat/zq,extract extzq,megabytes 50


Use ADD EXTTRAIL to create a trail for online processing on the local 
system and:
* Associate it with an Extract group.
* Assign a maximum file size.


Syntax:
ADD EXTTRAIL , EXTRACT [,MEGABYTES ]



The fully qualified path name of the trail. The actual trail name
can contain only two characters. GoldenGate appends this name with
a six-digit sequence number whenever a new file is created. For
example, a trail named /ggs/dirdat/tr would have files named
/ggs/dirdat/tr000001, /ggs/dirdat/tr000002, and so forth. 



The name of the Extract group to which the trail is bound. Only
one Extract process can write data to a trail.


MEGABYTES
The maximum size, in megabytes, of a file in the trail. The
default is 10. 


Example: ADD EXTTRAIL c:\ggs\dirdat\aa, EXTRACT finance, MEGABYTES 20






6. EXTFILESOURCE 意思
================================


add extract dpezq,exttrailsource /home/test/ggs95/dirdat/zq 


EXTFILESOURCE
Specifies an extract file as the data source. Use this option with a
secondary Extract group (data pump) that acts as an intermediary
between a primary Extract group and the target system. For ,
specify the fully qualified path name of the file, for example
c:\ggs\dirdat\extfile.






7. ADD RMTTRAIL命令
===================


add rmttrail  d:\ggs95\dirdat\zq ,extract dpezq,megabytes 50


Use ADD RMTTRAIL to create a trail for online processing on a remote
system and:
* Associate it with an Extract group.
* Assign a maximum file size.


In the parameter file, specify a RMTHOST entry before any RMTTRAIL
entries to identify the remote system and TCP/IP port for the Manager
process.


Syntax:
ADD RMTTRAIL , EXTRACT [, MEGABYTES ]



The fully qualified path name of the trail. The actual trail name can
contain only two characters. GoldenGate appends this name with a six-
digit sequence number whenever a new file is created. For example, a
trail named /ggs/dirdat/tr would have files named /ggs/dirdat/tr000001,
/ggs/dirdat/tr000002, and so forth.



The name of the Extract group to which the trail is bound. Only one
Extract process can write data to a trail.


MEGABYTES
The maximum size, in megabytes, of a file in the trail. The default 
is 10. 


Example: ADD RMTTRAIL c:\ggs\dirdat\aa, EXTRACT finance, MEGABYTES 20








8. ADD REPLICAT命令
===================


add replicat repzq, exttrail /home/gdora/ggs/dirdat/rt, nodbcheckpoint, begin now


Use ADD REPLICAT to create a Replicat group. Unless a special run is
specified, ADD REPLICAT creates checkpoints so that processing
continuity is maintained from run to run. See the GoldenGate 
Operations Guide for Windows and UNIX for procedures that include 
creating Replicat groups.


Syntax:
ADD REPLICAT
{, SPECIALRUN | 
   , EXTFILE | 
   , EXTTRAIL } 
[, BEGIN |
   , EXTSEQNO , EXTRBA ]
[, CHECKPOINTTABLE | NODBCHECKPOINT]
[, PARAMS ]
[, REPORT ]
[, DESC   ]



The name of the Replicat group. Follow these naming conventions:
* You can use up to eight ASCII characters, including nonalphanumeric
  characters such as the underscore (_). Any ASCII character can be
  used, so long as the operating system allows that character to be
  in a filename. This is because a group is identified by its
  associated checkpoint file.
* Group names are not case-sensitive.
* Use only one word.
* Do not use the word  port  as a group name. However, you can use
  the string  port  as part of the group name.
* Do not place a numeric value at the end of a group name, such as
  fin1, fin10, and so forth. You can place a numeric value at the
  beginning of a group name, such as 1_fin, 1fin, and so forth.
   ext_1
   ex+2t
   ex!2t






EXTTRAIL
Specifies a trail that was created with the ADD RMTTRAIL or ADD
EXTTRAIL command.


NODBCHECKPOINT
Specifies that this Replicat group will not write checkpoints to a
checkpoint table. This argument overrides the default CHECKPOINTTABLE
specification in the GLOBALS file.








9. PURGEOLDEXTRACTS
===================


Trail maintenance parameter


Use the PURGEOLDEXTRACTS parameter in a Manager parameter file to purge trail files when
GoldenGate has finished processing them. Without using PURGEOLDEXTRACTS, no purging is
performed, and trail files can consume significant disk space.
Using PURGEOLDEXTRACTS as a Manager parameter is preferred over using the Extract or
Replicat version of PURGEOLDEXTRACTS. As a Manager parameter, PURGEOLDEXTRACTS allows
you to manage trail files in a centralized fashion and take into account multiple processes.
NOTE When using this parameter, do not permit trail files to be deleted by any user or
program other than GoldenGate. It will cause PURGEOLDEXTRACTS to function
improperly




purgeoldextracts /home/gdora/ggs/dirdat/*, usecheckpoints, minkeepdays 2




Use USECHECKPOINTS to purge when all processes are finished with a file as indicated by
checkpoints.


Use the MINKEEP rules to set a minimum amount of time to keep unmodified data:
? Use MINKEEPHOURS or MINKEEPDAYS to keep data for hours or days.














10. AUTOSTART参数
=================


To auto-start a process
● Use AUTOSTART in the Manager parameter file to start one or more processes when
Manager starts.
● Use AUTORESTART in the Manager parameter file to restart a process after a failure.
Both of these parameters reduce the need to start a process manually with the START
command.




Syntax AUTOSTART


Specify one of the following:
EXTRACT
REPLICAT
ER (Extract and Replicat)


A group name or wildcard specification for multiple groups. When wildcarding
is used, GoldenGate starts all groups of the specified that satisfy
the wildcard on the local system, except those in PASSIVE mode.




Example AUTOSTART ER *








11. DYNAMICRESOLUTION
=====================


DYNAMICRESOLUTION | NODYNAMICRESOLUTION


Valid for Extract and Replicat
Use the DYNAMICRESOLUTION and NODYNAMICRESOLUTION parameters to control how table
names are resolved.


Use DYNAMICRESOLUTION to make processing start sooner when there is a large number of
tables specified in TABLE or MAP statements. By default, whenever a process starts,
GoldenGate queries the database for the attributes of the tables and then builds an object
record for them. The record is maintained in memory and on disk, and the process of
building it can be time-consuming if the database is large.


DYNAMICRESOLUTION causes the object record to be built one table at a time, instead of all at
once. A table’s attributes are added to the record the first time its object ID enters the
transaction log, which occurs with the first extracted transaction on that table. Recordbuilding
for other tables is deferred until activity occurs. DYNAMICRESOLUTION is the same as
WILDCARDRESOLVE DYNAMIC.


NODYNAMICRESOLUTION causes the object record to be built at startup. This option is not
supported for Teradata. NODYNAMICRESOLUTION is the same as WILDCARDRESOLVE IMMEDIATE.
For more information about WILDCARDRESOLVE, see page 368.


Default DYNAMICRESOLUTION
Syntax DYNAMICRESOLUTION








12. SOURCEDB
============


Valid for Manager, Extract, DEFGEN, and DDLGEN
Use the SOURCEDB parameter for databases that require a data source name as part of the
connection information. Tables specified in TABLE statements that follow SOURCEDB are
assumed to be from the specified data source.


其实是不管用，而且还会报错说不识别该参数


13. PASSTHRU
============


data-pump模式有的两种选择: PASSTHRU and NOPASSTHRU
PASSTHRU: 不与数据库交互，前提是源库与目标库objects必须一致。


Use the PASSTHRU and NOPASSTHRU parameters to control whether a data-pump Extract
processes tables in pass-through mode or normal mode. In pass-through mode, the Extract
process does not look up table definitions, either from the database or from a datadefinitions
file. Normally, the Extract process logs into the database to retrieve data
definitions and, if the target is NonStop, reads a data-definitions file. The definitions are
used to perform mapping and conversion functions.




To use PASSTHRU mode, the names of the source and target objects must be
identical. No column mapping, filtering, SQLEXEC functions, transformation, or other
functions that require data manipulation can be specified in the parameter file. You
can combine normal processing with pass-through processing by pairing PASSTHRU
and NOPASSTHRU with different TABLE statements.




14. ASSUMETARGETDEFS
=====================


不查询主库的表结构信息，前提是：使用MAP statement时，原库和目标库的表的字段结构必须一致。




Valid for Replicat
Use the ASSUMETARGETDEFS parameter when the source and target tables specified with a
MAP statement have identical column structure, such as when synchronizing a hot site. It
directs GoldenGate not to look up source structures from a source-definitions file.


For structures to be identical, they must contain identical column names (including case,
if applicable) and data types, and they must appear in the same order in each table. If
source and target tables do not have the same structure, use the SOURCEDEFS parameter
instead of ASSUMETARGETDEFS. See “SOURCEDEFS” on page 291.
Default None
Syntax ASSUMETARGETDEFS




15. REPERROR
============


REPERROR
Valid for Replicat
Use the REPERROR parameter to control how Replicat responds to errors. You can use one
REPERROR statement to handle most errors in a default manner, while using one or more
other REPERROR statements to handle specific errors differently. For example, you can ignore
duplicate-record errors but abort processing in all other cases.




DEFAULT Sets a global response to all errors except those for which explicit
REPERROR statements are specified.


DISCARD Log the error to the discard file but continue processing the transaction
and subsequent transactions.




DISCARDFILE
Valid for Extract and Replicat
Use the DISCARDFILE parameter to generate a discard file to which GoldenGate can log
records that it cannot process. Records can be discarded for several reasons. For example,
a record is discarded if the underlying table structure changed since the record was written
to the trail. You can use the discard file to help you identify the cause of processing errors.
Each entry in the discard file contains the discarded record buffer and an error code
indicating the reason. GoldenGate creates the specified discard file in the dirrpt subdirectory
of the GoldenGate installation directory. You can view it with a text editor or by
using the following command in GGSCI.
VIEW REPORT
Where: is the fully qualified name of the discard file.




GoldenGate creates the specified discard file in the dirrpt subdirectory
of the GoldenGate installation directory.
/* discard file的存放路径 */


APPEND Adds new content to existing content if the file already exists.


MEGABYTES Sets the maximum size of the file in megabytes. The valid range is from 1
to 2147. The default is 1 MB.




16. 使用通配符
==============
Using wildcards in command arguments
You can use wildcards with certain GoldenGate commands to control multiple Extract and
Replicat groups as a unit. The wildcard symbol that is supported by GoldenGate is the
asterisk (*). An asterisk represents any number of characters. For example, to start all
Extract groups whose names contain the letter X, issue the following command.
START EXTRACT *X*

你可能感兴趣的:(OGG参数详解)

  • log4j配置 yy爱yy
    #log4j.rootLogger配置的是大于等于当前级别的日志信息的输出#log4j.rootLogger用法:（注意appenderName可以是一个或多个）#log4j.rootLogger=日志级别,appenderName1,appenderName2,....#log4j.appender.appenderName2定义的是日志的输出方式，有两种：一种是命令行输出或者叫控制台输出，另一
  • vue render 函数详解 (配参数详解) 你的眼睛會笑 vue2vue.jsjavascript前端
    vuerender函数详解(配参数详解)在Vue3中，`render`函数被用来代替Vue2中的模板语法。它接收一个h函数（或者是`createElement`函数的别名），并且返回一个虚拟DOM。render函数的语法结构如下：render(h){returnh('div',{class:'container'},'Hello,World!')}在上面的示例中，我们使用h函数创建了一个div元素
  • 静态常量（static const）|| 日志记录器 课堂随想 moveit2机器人
    //AllsourcefilesthatuseROSloggingshoulddefineafile-specific//staticconstrclcpp::LoggernamedLOGGER,locatedatthetopofthefile//andinsidethenamespacewiththenarrowestscope(ifthereisone)staticconstrclcpp::L
  • python logging使用_Python实战之logging模块使用详解 weixin_39548832 pythonlogging使用
    用Python写代码的时候，在想看的地方写个printxx就能在控制台上显示打印信息，这样子就能知道它是什么了，但是当我需要看大量的地方或者在一个文件中查看的时候，这时候print就不大方便了，所以Python引入了logging模块来记录我想要的信息。print也可以输入日志，logging相对print来说更好控制输出在哪个地方，怎么输出及控制消息级别来过滤掉那些不需要的信息。1、日志级别im
  • python logging模块默认日志级别_一看就懂，Python 日志 logging 模块详解及应用 路易·罗莎 pythonlogging模块默认日志级别
    日志概述百度百科的日志概述：Windows网络操作系统都设计有各种各样的日志文件，如应用程序日志，安全日志、系统日志、Scheduler服务日志、FTP日志、WWW日志、DNS服务器日志等等，这些根据你的系统开启的服务的不同而有所不同。我们在系统上进行一些操作时，这些日志文件通常会记录下我们操作的一些相关内容，这些内容对系统安全工作人员相当有用。比如说有人对系统进行了IPC探测，系统就会在安全日志
  • python+adb 0o一人情 adb命令Python项目python开发语言
    #!/usr/bin/pythonenv#-*-coding:utf-8-*-importosimportsysimportsubprocessfromtimeimportsleepimportlogginglogging.basicConfig(level=logging.DEBUG)classScreenCapture():defget_screen_size(self):"""获取手机分辨率
  • springboot与日志 最后的夏t
    日志1、日志框架小张；开发一个大型系统；1、System.out.println("")；将关键数据打印在控制台；去掉？写在一个文件？2、框架来记录系统的一些运行时信息；日志框架；zhanglogging.jar；3、高大上的几个功能？异步模式？自动归档？xxxx？zhanglogging-good.jar？4、将以前框架卸下来？换上新的框架，重新修改之前相关的API；zhanglogging-p
  • python-logging库 冰美式QAQ python学习
    1.logging模块简介logging模块是Python内置的标准模块，主要用于输出运行日志，可以设置输出日志的等级、日志保存路径、日志输出格式等2.logging库日志级别级别级别数值使用时机DEBUG10详细信息，常用于调试INFO20程序正常运行过程中产生的一些信息WARNING30警告用户，虽然程序还在正常工作，但有可能发生错误ERROR40由于更严重的问题，程序已不能执行一些功能了CR
  • K8S - Volume - NFS 卷的简介和使用 nvd11 K8Skubernetes容器云原生
    在之前的文章里已经介绍了K8S中两个简单卷类型hostpath和emptydirk8s-Volume简介和HostPath的使用K8S-Emptydir-取代ELK使用fluentd构建loggingsaidcar但是这两种卷都有同1个限制，就是依赖于k8snodes的空间如果某个servicepod中需要的volumn空间很大，这时我们就需要考虑网络磁盘方案，其中NAS类型的Volume是常用且
  • K8S - Emptydir - 取代ELK 使用fluentd 构建logging saidcar nvd11 K8Skubernetes
    由于k8s的无状态service通常部署在多个POD中，实现多实例面向高并发。但是k8s本身并没有提供集中查询多个pod的日志的功能其中1个常见方案就是ELK.本文的方案是利用fluentdsidecar和emptydir把多个pod的日志导向到bigquery的table中。Emptydir的简介Kubernetes中的EmptyDir是一种用于容器之间共享临时存储的空目录卷类型。EmptyDi
  • GIN日志和日志格式 一叶知秋@qqy GO技术预研
    前言感谢开源项目gin-vue-admin，以及1010工作室的教程，项目文档我只是在跟着学习，然后记录下笔记而已，可能会有新的代码加入，但是本质还是跟着学习的一个过程。为什么要使用日志记录参数信息猜测用户行为复现系统bug并修复不推荐使用GIN自带的日志GIM虽然自带日志写入中间件，但是自定义比较蛮烦，而且使用起来也不能随心所欲。第三方日志工具go-logginglogrus看见go-loggi
  • 利用zabbix监控ogg进程(Windows平台) Linux运维老纪 万象人生-坚守Zabbix企业级监控岗位运维开发服务器云计算zabbixlinux
    欢迎来到我的博客，很高兴能够在这里和您见面！希望您在这里可以感受到一份轻松愉快的氛围，不仅可以获得有趣的内容和知识，也可以畅所欲言、分享您的想法和见解。推荐:Linux运维老纪的首页,持续学习,不断总结,共同进步,活到老学到老导航剑指大厂系列:全面总结运维核心技术:系统基础、数据库、网路技术、系统安全、自动化运维、容器技术、监控工具、脚本编程、云服务等。常用运维工具系列:常用的运维开发工具,zab
  • 小猿圈python学习-内置函数 小猿圈IT教育
    Python的len为什么你可以直接用？肯定是解释器启动时就定义好了内置参数详解https://docs.python.org/3/library/functions.html?highlight=built#ascii每个函数的作用我都帮你标好了abs#求绝对值all#ReturnTrueifbool(x)isTrueforallvaluesxintheiterable.Iftheiterabl
  • Django项目中log日志的配置 叫我DPT Django项目中常用组件脚本功能djangologging
    文章目录日志配置模板日志处理器Handlers日志配置模板#日志LOGGING={'version':1,#使用的日志模块的版本，目前官方提供的只有版本1，但是官方有可能会升级，为了避免升级出现的版本问题，所以这里固定为1'disable_existing_loggers':False,#是否禁用其他的已经存在的日志功能？肯定不能，有可能有些第三方模块在调用，所以禁用了以后，第三方模块无法捕获自身
  • 3DSMAX中英文对比大全(从A-Z分类) weixin_30587927 人工智能uijava
    AAbsoluteModeTransformType-in绝对坐标方式变换输入Absolute/RelativeSnapToggleMode绝对/相对捕捉开关模式ACISOptionsACIS选项Activate活动；激活ActivateAllMaps激活全部贴图ActivateGrid激活栅格。激活网格ActivateGridObject激活网格对象；激活网格物体ActivateHomeGrid
  • SpringBoot配置某个类启用debug日志 亚林瓜子 springbootjavaspring
    问题在Spring项目中，某个类里面使用debug级别的日志打印。需要使它生效。解决在Spring的配置文件中，添加：logging:level:com.xxx.xxx.service.impl.CxxxImp:DEBUG
  • Linux 运维三剑客：grep、sed 和 awk 实战案例与命令参数详解 Lyle_Tu Linux云计算运维运维linuxchrome云计算服务器
    在Linux运维中，grep、sed和awk是三个非常强大的文本处理工具，它们在处理文本数据时发挥着重要作用。本文将通过一些实战案例，展示这三个工具的使用方法和强大功能，并对它们的命令参数进行详解。grep：文本搜索利器grep是一个强大的文本搜索工具，它使用正则表达式来匹配文本模式。以下是grep的一些常用命令参数：-i：忽略大小写进行匹配。-v：反向查找，只打印不匹配的行。-n：显示匹配行的行
  • 周总结2019W03（20190114-20190120） 冷悲秋
    刚过了两天，周总结又来了！只不过，这才是正式的周总结，上次是补胎的。。。ok，开始……所以，这一篇算是补记了。一、时间的分配按照国际惯例，先上一张aTimeLogger的上周时间消耗统计的饼图的截图：感觉各方面的时间分配还算比较均衡，值得肯定！但是，还是根据国际惯例，来个但是，总的来说，缺少了学习时间。感觉来周这方面需要加强，要不然年度计划会泡汤了……二、值得肯定的事情首先，还是能够坚持写作，并进
  • Go Web实战-3.集成Logrus DevelopLink 物联网GinLogrusGolangWeb
    Gin自带了logger，可以输出到文件。不过为了更好的管理日志，以及后面的集中采集，这里引入了logrus。先看看Gin的log，官方代码，比较简单。funcmain(){//关闭打印的字体颜色。到文件里面不需要颜色gin.DisableConsoleColor()//输出到文件f,_:=os.Create("gin.log")gin.DefaultWriter=io.MultiWriter(f
  • unittest | 使用unittest模块来测试logging日志模块功能 胜天半月子 Python基础及应用unittestdanyuanlogging单元测试
    我们在这篇文章实现了在项目工程中编写一个logging模块，但是我们如何确定我们编写的模块功能的是否正常?你可能想到将全部代码写完后运行测试，但这是一个非常不好的习惯。❌最好的方式，是每写出来一个功能或者方法就对它进行测试，这样可以确保，当你完成代码后并运行，可以很少出现Bug,能直接运行成功。可以使用Python自带的unittest模块来做✔单元测试unittestlogging单元测试log
  • pytest 常用的辅助函数和工具函数 Lightning-py Pythonpytestpython开发语言
    pytest常用的辅助函数和工具函数示例#@File:my_module.pydeffetch_data():return'processdata'defprocess_data():data=fetch_data()returndata.upper()importloggingimportsysimportpytest#01-------------------------------@pyte
  • log4j2 与 log4j使用时的几点小区别 - log4j2上手说明 CoderCodingNo Java学习log4j单元测试
    虽然log4j2目前还是beta版，不过OneCoder已经忍不住要尝试一下。跟使用log4j比起来，上手上主要的区别有。1、依赖的jar包。使用slf4j+log4j2时，依赖的jar包如下：(gradle配置，Maven对照修改即可)dependencies{compile("org.apache.logging.log4j:log4j-api:$log4j_version","org.apa
  • log4j日志封装说明—slf4j对于log4j的日志封装-正确获取调用堆栈 CoderCodingNo Java学习log4j
    日志是项目中必用的东西，日志产品里最普及应该就是log4j了。(logback这里暂不讨论。)先看一下常用的log4j的用法，一般来说log4j都会配合slf4j或者common-logging使用，这里已slf4j为例。添加gradle依赖：dependencies{compile('log4j:log4j:1.2.17','org.slf4j:slf4j-api:1.7.5','org.slf
  • Java开发常用类库 白与微光
    Java开发常用类库参考https://cloud.tencent.com/developer/article/1522665https://segmentfault.com/a/1190000039359549一、日志相关类库Log4j/Log4j2：Apache的一个开源项目，高度可配置Logback：开源日志组件JUL：JDK自带日志库，也就是java.util.loggingJCL：Jak
  • 接口测试06 -- pytest接口自动化封装&Loggin实战 糯米不开花ぴ 软件测试python进阶python
    1.接口关键字封装1.1基本概念接口关键字封装是指：将接口测试过程中常用的操作、验证封装成可复用的关键字（或称为函数、方法），以提高测试代码的可维护性和可复用性。1.2常见的接口关键字封装方式1.发送请求：封装一个函数，接受参数如请求方法、URL、请求头、请求体等，使用相应的库发送请求，如requests库或HttpClient库。---------------->>>>
  • druid连接数据库报错 Aliyev MySQL连接错误时区问题版本匹配jar包
    信息:{dataSource-1}inited10月21,20229:26:36下午com.alibaba.druid.support.logging.JakartaCommonsLoggingImplerror严重:createconnectionSQLException,url:jdbc:mysql://localhost:3306/db1,errorCode0,state01S00java.
  • Oracle GoldenGate(OGG)-Oracle数据库迁移到MySQL数据库(全量+增量) 侯晓阳丶 OracleMySQL数据库oraclemysqldbalinux迁移学习经验分享
    目录前言环境介绍环境准备Oracle环境准备Oracle环境配置方法MySQL环境配置方法表结构转换和导入备份Oracle表结构为SQL文件使用sqlines工具将表结构进行转换安装OracleGoldenGate(OGG)Oracle端安装MySQL端安装创建相关用户MySQL端Oracle端OGG配置参数配置源端oracle-OGG配置目标端MySQL-OGG配置启动进程顺序(重要)相关报错解
  • SpringBoot Maven 升级自带jar包版本 呆呆a jarmavenspringboot
    当SpringBoot自带jar包版本较低时如图：想要升级log4j-to-slf4j到更高版本，需要在pom.xml文件中做修改：org.springframework.bootspring-boot-starterorg.apache.logging.log4jlog4j-to-slf4jorg.apache.logging.log4jlog4j-to-slf4j2.17.0org.apach
  • iftop：实时流量监控利器（使用方法） 云夏之末 Linuxlinux运维
    一、功能概览实时流量监控：使用iftop-i监控指定网络接口的实时流量。流量排序：iftop-i-o-s2，按流量大小排序，刷新间隔可调。过滤连接：iftop-i-f""，仅显示符合特定IP的连接。详细信息模式：iftop-i-nN，显示端口和协议，直接以数字形式。二、参数详解-i：监控特定接口。-B：设置显示单位（b、Kb、Mb）。-F""：应用过滤规则。-n：不解析主机名，仅显示IP。-N：不
  • 【详解之OpenCV中的findHomography()函数 和 cv2.warpPerspective()函数】 01_6 计算机视觉opencvopencv人工智能计算机视觉
    文章目录cv2.findHomography()函数介绍:函数原型参数说明返回值使用示例解释cv2.warpPerspective()函数介绍函数定义参数详解示例代码cv2.findHomography()函数介绍:cv2.findHomography()是OpenCV中的一个函数，用于找到两个图像之间的单应性矩阵（Homographymatrix）。在计算机视觉中，单应性矩阵是一个3x3的矩阵，
  • 用MiddleGenIDE工具生成hibernate的POJO（根据数据表生成POJO类） AdyZhang POJOeclipseHibernateMiddleGenIDE
    推荐:MiddlegenIDE插件,   是一个Eclipse   插件.     用它可以直接连接到数据库,   根据表按照一定的HIBERNATE规则作出BEAN和对应的XML ，用完后你可以手动删除它加载的JAR包和XML文件!     今天开始试着使用
  • .9.png Cb123456 android
      “点九”是andriod平台的应用软件开发里的一种特殊的图片形式，文件扩展名为：.9.png 　　智能手机中有自动横屏的功能,同一幅界面会在随着手机(或平板电脑)中的方向传感器的参数不同而改变显示的方向,在界面改变方向后,界面上的图形会因为长宽的变化而产生拉伸,造成图形的失真变形。 　　我们都知道android平台有多种不同的分辨率，很多控件的切图文件在被放大拉伸后，边
  • 算法的效率 天子之骄 算法效率复杂度最坏情况运行时间大O阶平均情况运行时间
    算法的效率 效率是速度和空间消耗的度量。集中考虑程序的速度，也称运行时间或执行时间，用复杂度的阶(O)这一标准来衡量。空间的消耗或需求也可以用大O表示，而且它总是小于或等于时间需求。   以下是我的学习笔记：   1.求值与霍纳法则，即为秦九韶公式。   2.测定运行时间的最可靠方法是计数对运行时间有贡献的基本操作的执行次数。运行时间与这个计数成正比。
  • java数据结构 何必如此 java数据结构
    Java 数据结构 Java工具包提供了强大的数据结构。在Java中的数据结构主要包括以下几种接口和类： 枚举（Enumeration） 位集合（BitSet） 向量（Vector） 栈（Stack） 字典（Dictionary） 哈希表（Hashtable） 属性（Properties） 以上这些类是传统遗留的，在Java2中引入了一种新的框架-集合框架(Collect
  • MybatisHelloWorld 3213213333332132
    //测试入口TestMyBatis package com.base.helloworld.test; import java.io.IOException; import org.apache.ibatis.io.Resources; import org.apache.ibatis.session.SqlSession; import org.apache.ibat
  • Java|urlrewrite|URL重写|多个参数 7454103 javaxmlWeb工作
     个人工作经验！ 如有不当之处，敬请指点 1.0  web -info 目录下建立     urlrewrite.xml  文件 类似如下： <?xml version="1.0" encoding="UTF-8" ?>   <!DOCTYPE u
  • 达梦数据库+ibatis darkranger sqlmysqlibatisSQL Server
    --插入数据方面 如果您需要数据库自增... 那么在插入的时候不需要指定自增列. 如果想自己指定ID列的值, 那么要设置 set identity_insert  数据库名.模式名.表名; ----然后插入数据; example: create table zhabei.test( id bigint identity(1,1) primary key, nam
  • XML 解析 四种方式 aijuans android
    XML现在已经成为一种通用的数据交换格式,平台的无关性使得很多场合都需要用到XML。本文将详细介绍用Java解析XML的四种方法。 XML现在已经成为一种通用的数据交换格式,它的平台无关性,语言无关性,系统无关性,给数据集成与交互带来了极大的方便。对于XML本身的语法知识与技术细节,需要阅读相关的技术文献,这里面包括的内容有DOM(Document Object
  • spring中配置文件占位符的使用 avords
    1.类 <?xml version="1.0" encoding="UTF-8"?><!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.o
  • 前端工程化-公共模块的依赖和常用的工作流 bee1314 webpack
    题记： 一个人的项目，还有工程化的问题嘛？   我们在推进模块化和组件化的过程中，肯定会不断的沉淀出我们项目的模块和组件。对于这些沉淀出的模块和组件怎么管理？另外怎么依赖也是个问题？ 你真的想这样嘛？   var BreadCrumb = require(‘../../../../uikit/breadcrumb’); //真心ugly。  
  • 上司说「看你每天准时下班就知道你工作量不饱和」，该如何回应？ bijian1013 项目管理沟通IT职业规划
    问题：上司说「看你每天准时下班就知道你工作量不饱和」，如何回应         正常下班时间6点，只要是6点半前下班的，上司都认为没有加班。   Eno-Bea回答，注重感受，不一定是别人的         虽然我不知道你具体从事什么工作与职业，但是我大概猜测，你是从事一项不太容易出现阶段性成果的工作
  • TortoiseSVN，过滤文件 征客丶 SVN
    环境： TortoiseSVN 1.8 配置： 在文件夹空白处右键 选择  TortoiseSVN -> Settings 在 Global ignote pattern 中添加要过滤的文件： 多类型用英文空格分开 *name ： 过滤所有名称为 name 的文件或文件夹 *.name ： 过滤所有后缀为 name 的文件或文件夹 --------
  • 【Flume二】HDFS sink细说 bit1129 Flume
    1. Flume配置   a1.sources=r1 a1.channels=c1 a1.sinks=k1 ###Flume负责启动44444端口 a1.sources.r1.type=avro a1.sources.r1.bind=0.0.0.0 a1.sources.r1.port=44444 a1.sources.r1.chan
  • The Eight Myths of Erlang Performance bookjovi erlang
    erlang有一篇guide很有意思： http://www.erlang.org/doc/efficiency_guide 里面有个The Eight Myths of Erlang Performance： http://www.erlang.org/doc/efficiency_guide/myths.html   Myth: Funs are sl
  • java多线程网络传输文件(非同步)-2008-08-17 ljy325 java多线程socket
    利用 Socket 套接字进行面向连接通信的编程。客户端读取本地文件并发送；服务器接收文件并保存到本地文件系统中。 使用说明:请将TransferClient, TransferServer, TempFile三个类编译，他们的类包是FileServer. 客户端: 修改TransferClient: serPort, serIP, filePath, blockNum,的值来符合您机器的系
  • 读《研磨设计模式》-代码笔记-模板方法模式 bylijinnan java设计模式
    声明： 本文只为方便我个人查阅和理解，详细的分析以及源代码请移步 原作者的博客http://chjavach.iteye.com/ import java.sql.Connection; import java.sql.DriverManager; import java.sql.PreparedStatement; import java.sql.ResultSet;
  • 配置心得 chenyu19891124 配置
    时间就这样不知不觉的走过了一个春夏秋冬，转眼间来公司已经一年了，感觉时间过的很快，时间老人总是这样不停走，从来没停歇过。 作为一名新手的配置管理员，刚开始真的是对配置管理是一点不懂，就只听说咱们公司配置主要是负责升级，而具体该怎么做却一点都不了解。经过老员工的一点点讲解，慢慢的对配置有了初步了解，对自己所在的岗位也慢慢的了解。 做了一年的配置管理给自总结下： 1.改变 从一个以前对配置毫无
  • 对“带条件选择的并行汇聚路由问题”的再思考 comsci 算法工作软件测试嵌入式领域模型
    2008年上半年，我在设计并开发基于”JWFD流程系统“的商业化改进型引擎的时候，由于采用了新的嵌入式公式模块而导致出现“带条件选择的并行汇聚路由问题”(请参考2009-02-27博文)，当时对这个问题的解决办法是采用基于拓扑结构的处理思想，对汇聚点的实际前驱分支节点通过算法预测出来，然后进行处理，简单的说就是找到造成这个汇聚模型的分支起点，对这个起始分支节点实际走的路径数进行计算，然后把这个实际
  • Oracle 10g 的clusterware 32位 下载地址 daizj oracle
    Oracle 10g 的clusterware 32位 下载地址 http://pan.baidu.com/share/link?shareid=531580&uk=421021908 http://pan.baidu.com/share/link?shareid=137223&uk=321552738 http://pan.baidu.com/share/l
  • 非常好的介绍：Linux定时执行工具cron dongwei_6688 linux
    Linux经过十多年的发展，很多用户都很了解Linux了，这里介绍一下Linux下cron的理解，和大家讨论讨论。cron是一个Linux 定时执行工具，可以在无需人工干预的情况下运行作业，本文档不讲cron实现原理，主要讲一下Linux定时执行工具cron的具体使用及简单介绍。 新增调度任务推荐使用crontab -e命令添加自定义的任务（编辑的是/var/spool/cron下对应用户的cr
  • Yii assets目录生成及修改 dcj3sjt126com yii
    assets的作用是方便模块化，插件化的，一般来说出于安全原因不允许通过url访问protected下面的文件，但是我们又希望将module单独出来，所以需要使用发布，即将一个目录下的文件复制一份到assets下面方便通过url访问。 assets设置对应的方法位置 \framework\web\CAssetManager.php   assets配置方法 在m
  • mac工作软件推荐 dcj3sjt126com mac
    mac上的Terminal + bash ＋ screen组合现在已经非常好用了，但是还是经不起iterm＋zsh＋tmux的冲击。在同事的强烈推荐下，趁着升级mac系统的机会，顺便也切换到iterm＋zsh＋tmux的环境下了。 我为什么要要iterm2 切换过来也是脑袋一热的冲动，我也调查过一些资料，看了下iterm的一些优点： * 兼容性好，远程服务器 vi 什么的低版本能很好兼
  • Memcached(三)、封装Memcached和Ehcache frank1234 memcachedehcachespring ioc
    本文对Ehcache和Memcached进行了简单的封装，这样对于客户端程序无需了解ehcache和memcached的差异，仅需要配置缓存的Provider类就可以在二者之间进行切换，Provider实现类通过Spring IoC注入。 cache.xml <?xml version="1.0" encoding="UTF-8"?>
  • Remove Duplicates from Sorted List II hcx2013 remove
    Given a sorted linked list, delete all nodes that have duplicate numbers, leaving only distinct numbers from the original list. For example,Given 1->2->3->3->4->4->5,
  • Spring4新特性——注解、脚本、任务、MVC等其他特性改进 jinnianshilongnian spring4
    Spring4新特性——泛型限定式依赖注入 Spring4新特性——核心容器的其他改进 Spring4新特性——Web开发的增强 Spring4新特性——集成Bean Validation 1.1(JSR-349)到SpringMVC  Spring4新特性——Groovy Bean定义DSL Spring4新特性——更好的Java泛型操作API  Spring4新
  • MySQL安装文档 liyong0802 mysql
      工作中用到的MySQL可能安装在两种操作系统中，即Windows系统和Linux系统。以Linux系统中情况居多。   安装在Windows系统时与其它Windows应用程序相同按照安装向导一直下一步就即，这里就不具体介绍，本文档只介绍Linux系统下MySQL的安装步骤。   Linux系统下安装MySQL分为三种：RPM包安装、二进制包安装和源码包安装。二
  • 使用VS2010构建HotSpot工程 p2p2500 HotSpotOpenJDKVS2010
    1. 下载OpenJDK7的源码：      http://download.java.net/openjdk/jdk7      http://download.java.net/openjdk/      2. 环境配置     ▶
  • Oracle实用功能之分组后列合并 seandeng888 oracle分组实用功能合并
    1       实例解析 由于业务需求需要对表中的数据进行分组后进行合并的处理，鉴于Oracle10g没有现成的函数实现该功能，且该功能如若用JAVA代码实现会比较复杂，因此，特将SQL语言的实现方式分享出来，希望对大家有所帮助。如下： 表test 数据如下： ID,SUBJECTCODE,DIMCODE,VALUE 1&nbs
  • Java定时任务注解方式实现 tuoni javaspringjvmxmljni
    Spring 注解的定时任务，有如下两种方式： 第一种： <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans"  xmlns:xsi="http
  • 11大Java开源中文分词器的使用方法和分词效果对比 yangshangchuan word分词器ansj分词器Stanford分词器FudanNLP分词器HanLP分词器
    本文的目标有两个： 1、学会使用11大Java开源中文分词器 2、对比分析11大Java开源中文分词器的分词效果 本文给出了11大Java开源中文分词的使用方法以及分词结果对比代码，至于效果哪个好，那要用的人结合自己的应用场景自己来判断。 11大Java开源中文分词器，不同的分词器有不同的用法，定义的接口也不一样，我们先定义一个统一的接口： /** * 获取文本的所有分词结果, 对比