springMvc的执行流程(源码分析)

1.在springMvc中负责处理请求的类为DispatcherServlet，这个类与我们传统的Servlet是一样的。我们来看看它的继承图

 

 2. 我们发现DispatcherServlet也继承了HttpServlet，所以DispatcherServlet在处理请求时也会从service()方法开始。知道这一点后我们开始分析它的处理过程。

(1).我们在ApplicationFilterChain中的internalDoFilter()方法中打断点(至于为什么从这儿开始，需要去看Tomcat)

private void internalDoFilter(ServletRequest request,
                                  ServletResponse response)
        throws IOException, ServletException {

        // Call the next filter if there is one
        if (pos < n) {
            ApplicationFilterConfig filterConfig = filters[pos++];
            try {
                Filter filter = filterConfig.getFilter();

                if (request.isAsyncSupported() && "false".equalsIgnoreCase(
                        filterConfig.getFilterDef().getAsyncSupported())) {
                    request.setAttribute(Globals.ASYNC_SUPPORTED_ATTR, Boolean.FALSE);
                }
                if( Globals.IS_SECURITY_ENABLED ) {
                    final ServletRequest req = request;
                    final ServletResponse res = response;
                    Principal principal =
                        ((HttpServletRequest) req).getUserPrincipal();

                    Object[] args = new Object[]{req, res, this};
                    SecurityUtil.doAsPrivilege ("doFilter", filter, classType, args, principal);
                } else {
                    filter.doFilter(request, response, this);
                }
            } catch (IOException | ServletException | RuntimeException e) {
                throw e;
            } catch (Throwable e) {
                e = ExceptionUtils.unwrapInvocationTargetException(e);
                ExceptionUtils.handleThrowable(e);
                throw new ServletException(sm.getString("filterChain.filter"), e);
            }
            return;
        }

        // We fell off the end of the chain -- call the servlet instance
        try {
            if (ApplicationDispatcher.WRAP_SAME_OBJECT) {
                lastServicedRequest.set(request);
                lastServicedResponse.set(response);
            }

            if (request.isAsyncSupported() && !servletSupportsAsync) {
                request.setAttribute(Globals.ASYNC_SUPPORTED_ATTR,
                        Boolean.FALSE);
            }
            // Use potentially wrapped request from this point
            if ((request instanceof HttpServletRequest) &&
                    (response instanceof HttpServletResponse) &&
                    Globals.IS_SECURITY_ENABLED ) {
                final ServletRequest req = request;
                final ServletResponse res = response;
                Principal principal =
                    ((HttpServletRequest) req).getUserPrincipal();
                Object[] args = new Object[]{req, res};
                SecurityUtil.doAsPrivilege("service",
                                           servlet,
                                           classTypeUsedInService,
                                           args,
                                           principal);
            } else {
                servlet.service(request, response);                    //在这里打断点，进入到我们的service方法
            }
        } catch (IOException | ServletException | RuntimeException e) {
            throw e;
        } catch (Throwable e) {
            e = ExceptionUtils.unwrapInvocationTargetException(e);
            ExceptionUtils.handleThrowable(e);
            throw new ServletException(sm.getString("filterChain.servlet"), e);
        } finally {
            if (ApplicationDispatcher.WRAP_SAME_OBJECT) {
                lastServicedRequest.set(null);
                lastServicedResponse.set(null);
            }
        }
    }

(2)进入到FrameworkServlet中的service方法(注意在FrameworkServlet中重写了HttpServlet中的service方法)

   @Override
    protected void service(HttpServletRequest request, HttpServletResponse response)
            throws ServletException, IOException {

        HttpMethod httpMethod = HttpMethod.resolve(request.getMethod());            //HttpMethod为枚举类型，成员为GET, HEAD, POST, PUT, PATCH, DELETE, OPTIONS, TRACE;
        if (HttpMethod.PATCH == httpMethod || httpMethod == null) {　　　　　　　　　　　//如果请求方法为空，或者是PATCH
            processRequest(request, response);                                       //处理请求
        }
        else {
            super.service(request, response);                                    //交给父类进行处理,本例中我们是get请求，所以转到这里
        }
    }

(3)进入到父类HttpServlet中的service方法

 protected void service(HttpServletRequest req, HttpServletResponse resp)
        throws ServletException, IOException {

        String method = req.getMethod();                                  //获取请求的方法

        if (method.equals(METHOD_GET)) {
            long lastModified = getLastModified(req);
            if (lastModified == -1) {
                // servlet doesn't support if-modified-since, no reason
                // to go through further expensive logic
                doGet(req, resp);                                         //执行get请求
            } else {
                long ifModifiedSince;
                try {
                    ifModifiedSince = req.getDateHeader(HEADER_IFMODSINCE);
                } catch (IllegalArgumentException iae) {
                    // Invalid date header - proceed as if none was set
                    ifModifiedSince = -1;
                }
                if (ifModifiedSince < (lastModified / 1000 * 1000)) {
                    // If the servlet mod time is later, call doGet()
                    // Round down to the nearest second for a proper compare
                    // A ifModifiedSince of -1 will always be less
                    maybeSetLastModified(resp, lastModified);
                    doGet(req, resp);
                } else {
                    resp.setStatus(HttpServletResponse.SC_NOT_MODIFIED);
                }
            }

        } else if (method.equals(METHOD_HEAD)) {
            long lastModified = getLastModified(req);
            maybeSetLastModified(resp, lastModified);
            doHead(req, resp);

        } else if (method.equals(METHOD_POST)) {
            doPost(req, resp);

        } else if (method.equals(METHOD_PUT)) {
            doPut(req, resp);

        } else if (method.equals(METHOD_DELETE)) {
            doDelete(req, resp);

        } else if (method.equals(METHOD_OPTIONS)) {
            doOptions(req,resp);

        } else if (method.equals(METHOD_TRACE)) {
            doTrace(req,resp);

        } else {
            //
            // Note that this means NO servlet supports whatever
            // method was requested, anywhere on this server.
            //

            String errMsg = lStrings.getString("http.method_not_implemented");
            Object[] errArgs = new Object[1];
            errArgs[0] = method;
            errMsg = MessageFormat.format(errMsg, errArgs);

            resp.sendError(HttpServletResponse.SC_NOT_IMPLEMENTED, errMsg);
        }
    }

(4)由于doGet方法也被我们的FrameworkServlet重写，所以这里转向FrameworkServlet类

@Override
    protected final void doGet(HttpServletRequest request, HttpServletResponse response)
            throws ServletException, IOException {

        processRequest(request, response);   //我们在这里发现最终还是会到达processRequest方法
    }

(4)我们来看看FrameworkServlet中的processRequest方法

protected final void processRequest(HttpServletRequest request, HttpServletResponse response)
            throws ServletException, IOException {

        long startTime = System.currentTimeMillis();                   //在本篇中只介绍大致的执行过程，这里不详细介绍。。。。
        Throwable failureCause = null;

        LocaleContext previousLocaleContext = LocaleContextHolder.getLocaleContext();
        LocaleContext localeContext = buildLocaleContext(request);

        RequestAttributes previousAttributes = RequestContextHolder.getRequestAttributes();
        ServletRequestAttributes requestAttributes = buildRequestAttributes(request, response, previousAttributes);

        WebAsyncManager asyncManager = WebAsyncUtils.getAsyncManager(request);
        asyncManager.registerCallableInterceptor(FrameworkServlet.class.getName(), new RequestBindingInterceptor());

        initContextHolders(request, localeContext, requestAttributes);

        try {
            doService(request, response);                       　　//我们关心这个方法，发现它会转向doService方法                  
        }
        catch (ServletException ex) {
            failureCause = ex;
            throw ex;
        }
        catch (IOException ex) {
            failureCause = ex;
            throw ex;
        }
        catch (Throwable ex) {
            failureCause = ex;
            throw new NestedServletException("Request processing failed", ex);
        }

        finally {
            resetContextHolders(request, previousLocaleContext, previousAttributes);
            if (requestAttributes != null) {
                requestAttributes.requestCompleted();
            }

            if (logger.isDebugEnabled()) {
                if (failureCause != null) {
                    this.logger.debug("Could not complete request", failureCause);
                }
                else {
                    if (asyncManager.isConcurrentHandlingStarted()) {
                        logger.debug("Leaving response open for concurrent processing");
                    }
                    else {
                        this.logger.debug("Successfully completed request");
                    }
                }
            }

            publishRequestHandledEvent(request, response, startTime, failureCause);
        }
    }

(5)FrameworkServlet中的doService方法(该方法为抽象方法，有自类具体实现) 所以processRequest为模板模式的实现

protected abstract void doService(HttpServletRequest request, HttpServletResponse response)
            throws Exception;

(6)我们看上面的类图，FrameworkServlet的自类为DispatcherServlet（饶了半天终于到了我们的DispatcherServlet）

@Override
    protected void doService(HttpServletRequest request, HttpServletResponse response) throws Exception {
        if (logger.isDebugEnabled()) {
            String resumed = WebAsyncUtils.getAsyncManager(request).hasConcurrentResult() ? " resumed" : "";
            logger.debug("DispatcherServlet with name '" + getServletName() + "'" + resumed +
                    " processing " + request.getMethod() + " request for [" + getRequestUri(request) + "]");
        }

        // Keep a snapshot of the request attributes in case of an include,
        // to be able to restore the original attributes after the include.
        Map attributesSnapshot = null;
        if (WebUtils.isIncludeRequest(request)) {
            attributesSnapshot = new HashMap();
            Enumeration attrNames = request.getAttributeNames();
            while (attrNames.hasMoreElements()) {
                String attrName = (String) attrNames.nextElement();
                if (this.cleanupAfterInclude || attrName.startsWith(DEFAULT_STRATEGIES_PREFIX)) {
                    attributesSnapshot.put(attrName, request.getAttribute(attrName));
                }
            }
        }

        // Make framework objects available to handlers and view objects.
        request.setAttribute(WEB_APPLICATION_CONTEXT_ATTRIBUTE, getWebApplicationContext());
        request.setAttribute(LOCALE_RESOLVER_ATTRIBUTE, this.localeResolver);
        request.setAttribute(THEME_RESOLVER_ATTRIBUTE, this.themeResolver);
        request.setAttribute(THEME_SOURCE_ATTRIBUTE, getThemeSource());

        FlashMap inputFlashMap = this.flashMapManager.retrieveAndUpdate(request, response);
        if (inputFlashMap != null) {
            request.setAttribute(INPUT_FLASH_MAP_ATTRIBUTE, Collections.unmodifiableMap(inputFlashMap));
        }
        request.setAttribute(OUTPUT_FLASH_MAP_ATTRIBUTE, new FlashMap());
        request.setAttribute(FLASH_MAP_MANAGER_ATTRIBUTE, this.flashMapManager);

        try {
            doDispatch(request, response);　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　//我们重点关注这个方法，进行调度
        }
        finally {
            if (!WebAsyncUtils.getAsyncManager(request).isConcurrentHandlingStarted()) {
                // Restore the original attribute snapshot, in case of an include.
                if (attributesSnapshot != null) {
                    restoreAttributesAfterInclude(request, attributesSnapshot);
                }
            }
        }
    }

(7)我们发现最终的调度过程都是交个DispatcherServlet中的doDispatcher()方法来完成的，重点分析这个方法

protected void doDispatch(HttpServletRequest request, HttpServletResponse response) throws Exception {
        HttpServletRequest processedRequest = request;
        HandlerExecutionChain mappedHandler = null;
        boolean multipartRequestParsed = false;

        WebAsyncManager asyncManager = WebAsyncUtils.getAsyncManager(request);

        try {
            ModelAndView mv = null;            
            Exception dispatchException = null;

            try {
                processedRequest = checkMultipart(request);
                multipartRequestParsed = (processedRequest != request);

                // Determine handler for the current request.
                mappedHandler = getHandler(processedRequest);                           //获取HandlerExecutionChain,在HandlerExecutionChain中包含了我们的Controller以及拦截器
                if (mappedHandler == null || mappedHandler.getHandler() == null) {
                    noHandlerFound(processedRequest, response);
                    return;　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　//如果找不到执行方法则退出
                }

                // Determine handler adapter for the current request.
                HandlerAdapter ha = getHandlerAdapter(mappedHandler.getHandler());       //通过我们的Handler来找到HandlerAdpter（处理器执行器）

                // Process last-modified header, if supported by the handler.
                String method = request.getMethod();
                boolean isGet = "GET".equals(method);
                if (isGet || "HEAD".equals(method)) {
                    long lastModified = ha.getLastModified(request, mappedHandler.getHandler());
                    if (logger.isDebugEnabled()) {
                        logger.debug("Last-Modified value for [" + getRequestUri(request) + "] is: " + lastModified);
                    }
                    if (new ServletWebRequest(request, response).checkNotModified(lastModified) && isGet) {
                        return;
                    }
                }

                if (!mappedHandler.applyPreHandle(processedRequest, response)) {     //执行拦截器的preHadnle()方法
                    return;
                }

                // Actually invoke the handler.
                mv = ha.handle(processedRequest, response, mappedHandler.getHandler());　　　　//执行具体的Controller中的方法,得到一个ModelAndView对象

                if (asyncManager.isConcurrentHandlingStarted()) {
                    return;
                }

                applyDefaultViewName(processedRequest, mv);　　　　　　　　　　　　　　　
                mappedHandler.applyPostHandle(processedRequest, response, mv);     //执行拦截器的postHandler方法
            }
            catch (Exception ex) {
                dispatchException = ex;
            }
            catch (Throwable err) {
                // As of 4.3, we're processing Errors thrown from handler methods as well,
                // making them available for @ExceptionHandler methods and other scenarios.
                dispatchException = new NestedServletException("Handler dispatch failed", err);
            }
            processDispatchResult(processedRequest, response, mappedHandler, mv, dispatchException);  //在这里进行师徒解析的过程
        }
        catch (Exception ex) {
            triggerAfterCompletion(processedRequest, response, mappedHandler, ex);
        }
        catch (Throwable err) {
            triggerAfterCompletion(processedRequest, response, mappedHandler,
                    new NestedServletException("Handler processing failed", err));
        }
        finally {
            if (asyncManager.isConcurrentHandlingStarted()) {
                // Instead of postHandle and afterCompletion
                if (mappedHandler != null) {
                    mappedHandler.applyAfterConcurrentHandlingStarted(processedRequest, response);
                }
            }
            else {
                // Clean up any resources used by a multipart request.
                if (multipartRequestParsed) {
                    cleanupMultipart(processedRequest);
                }
            }
        }
    }

这样DispatcherServlet的一次请求过程就完成了（当然这里只是粗略的解析了一下执行流程，之后再去看源码不断的细化）

转载于:https://www.cnblogs.com/liwangcai/p/10743943.html