使用树莓派控制4路继电器

IND1 不是接在17号GPIO口上，而是GPIO.0口上，即为11号口上才是对的，其它网上的教程这方面都未详细说明 ，我也不知道为什么：）

可能 GPIO默认out的是 GPIO.0 号口。 

目前就这么多吧，接下来就是写自动化控制了。

加上简单控制 的python 代码

1：～～～～～～～～

  1 #!/user/bin/python
  2 # like this use: python gpiotest.py 1 or 0
  3 
  4 import sys
  5 import RPi.GPIO as GPIO
  6 GPIO.setwarnings(False)
  7 GPIO.setmode(GPIO.BCM)
  8 args = sys.argv
  9 pin = 17   # 这里的pin = 17 为 BCM 编码 的 17 ，树莓派的第11号口，wiringPi的0
 10 ct1 = args[1]
 11 
 12 if (int(ct1) == 1):
 13     GPIO.setup(pin, GPIO.OUT)
 14     GPIO.output(pin,GPIO.HIGH)
 15 
 16 if (int(ct1) == 0):
 17     GPIO.setup(pin, GPIO.OUT)
 18     GPIO.output(pin,GPIO.LOW)

  

代码2： 控制4路

##################################################


#           P17 ----> Relay_Ch1
# P18 ----> Relay_Ch2
# P27 ----> Relay_Ch3
# P22 ----> Relay_Ch4
##################################################
#!/usr/bin/python
# -*- coding:utf-8 -*-
import RPi.GPIO as GPIO
import time


Relay_Ch1 = 17 
Relay_Ch2 = 18
Relay_Ch3 = 27
Relay_Ch4 = 22


GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)


GPIO.setup(Relay_Ch1,GPIO.OUT)
GPIO.setup(Relay_Ch2,GPIO.OUT)
GPIO.setup(Relay_Ch3,GPIO.OUT)
GPIO.setup(Relay_Ch4,GPIO.OUT)


print("Setup The Relay Module is [success]")


try:
while True:
#Control the Channel 1
GPIO.output(Relay_Ch1,GPIO.LOW)
print("Channel 1:The Common Contact is access to the Normal Open Contact!")
time.sleep(0.5)

GPIO.output(Relay_Ch1,GPIO.HIGH)
print("Channel 1:The Common Contact is access to the Normal Closed Contact!\n")
time.sleep(0.5)


#Control the Channel 2
GPIO.output(Relay_Ch2,GPIO.LOW)
print("Channel 2:The Common Contact is access to the Normal Open Contact!")
time.sleep(0.5)

GPIO.output(Relay_Ch2,GPIO.HIGH)
print("Channel 2:The Common Contact is access to the Normal Closed Contact!\n")
time.sleep(0.5)


#Control the Channel 3
GPIO.output(Relay_Ch3,GPIO.LOW)
print("Channel 3:The Common Contact is access to the Normal Open Contact!")
time.sleep(0.5)

GPIO.output(Relay_Ch3,GPIO.HIGH)
print("Channel 3:The Common Contact is access to the Normal Closed Contact!\n")
time.sleep(0.5)

#Control the Channel 4
GPIO.output(Relay_Ch4,GPIO.LOW)
print("Channel 4:The Common Contact is access to the Normal Open Contact!")
time.sleep(0.5)

GPIO.output(Relay_Ch4,GPIO.HIGH)
print("Channel 4:The Common Contact is access to the Normal Closed Contact!\n")
time.sleep(0.5)
except:
print("except")
GPIO.cleanup()