homestead搭载laravle安装流程 for mac

1.在bash中执行， vagrant box add laravel/homestead

2.进入用户文件夹，即cd，后执行 git clone https://github.com/laravel/homestead.git Homestead

3.此时，会在用户主目录生成Homestead目录，进入该目录，执行bash init.sh，此时，会在用户主目录生成.homestead隐藏目录

4.进入.homestead隐藏目录，编辑配置文件Homestead.yaml，保存退出

5.根据对配置文件的修改创建相应的代码目录，并在hosts文件夹下添加IP与域名映射

6.生成ssh-key,即执行：ssh-keygen -t rsa -C 'you@homestead',此时会在用户主目录下生成.ssh隐藏目录，该目录内容与.homestead中配置文件有关

7.进入Homestead目录，执行vagrant up启动服务器，若启动出现下述错误：

vagrant up
Bringing machine 'homestead-7' up with 'virtualbox' provider...
==> homestead-7: Checking if box 'laravel/homestead' is up to date...
==> homestead-7: Clearing any previously set forwarded ports...
==> homestead-7: Fixed port collision for 80 => 8000. Now on port 2200.
==> homestead-7: Fixed port collision for 443 => 44300. Now on port 2201.
==> homestead-7: Fixed port collision for 3306 => 33060. Now on port 2202.
==> homestead-7: Fixed port collision for 5432 => 54320. Now on port 2203.
==> homestead-7: Fixed port collision for 22 => 2222. Now on port 2204.
==> homestead-7: Clearing any previously set network interfaces...
==> homestead-7: Preparing network interfaces based on configuration...
    homestead-7: Adapter 1: nat
    homestead-7: Adapter 2: hostonly
==> homestead-7: Forwarding ports...
    homestead-7: 80 (guest) => 2200 (host) (adapter 1)
    homestead-7: 443 (guest) => 2201 (host) (adapter 1)
    homestead-7: 3306 (guest) => 2202 (host) (adapter 1)
    homestead-7: 5432 (guest) => 2203 (host) (adapter 1)
    homestead-7: 22 (guest) => 2204 (host) (adapter 1)
==> homestead-7: Running 'pre-boot' VM customizations...
==> homestead-7: Booting VM...
==> homestead-7: Waiting for machine to boot. This may take a few minutes...
    homestead-7: SSH address: 127.0.0.1:2204
    homestead-7: SSH username: vagrant
    homestead-7: SSH auth method: private key
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.

If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.

If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.

If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.

，可按以下步骤解决：

1. Completely uninstall and reinstall Vagrant, VirtualBox, and Homestead.
2. Ensure the homestead-7 box is shut down within the VirtualBox UI
3. Right-click the homestead-7 box, and choose Settings
4. Click 'Network'
5. Under 'Adapter 1', which should be attached to NAT, click 'Advanced'
6. Tick the box beside 'Cable Connected'
7. Save settings, and reprovision Homestead with vagrant up --provision
8. Run vagrant reload --provision to reprovision the machine

，原帖网址：http://stackoverflow.com/questions/40968297/laravel-homestead-hangs-at-ssh-auth-method-private-key-on-mac/40998978