RT-Thread 应用篇 --- STM32添加FinSH控制台

0. 关于FinSH的介绍

• RT-Thread 文档中心

---

1. 工程准备

• 安装：在 https://www.rt-thread.org/download/mdk/ 下载并安装 .pack 包。
• 准备一个串口实验工程。
• 在Keil的勾选组件
  
• 修改设备名
  

---

2. RT-Thread 3.1.1版本添加FinSH

• 定义一个串口设备，以及串口接收缓冲BUFF

  struct rt_device rtt_console;
  
  char console_receive_buf[10] = {
         0};
  int console_receive_count = 0;
  int console_read_count = 0;
  

• 注册串口设备，设备名要与 rtconfig.h 中修改的相同

  rt_device_register(&rtt_console, "usart1", RT_DEVICE_FLAG_ACTIVATED);
  

• 定义串口设备的读写函数

  rt_size_t rtt_console_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size) {
         
      rt_hw_console_output(buffer);
      
      return size;
  }
  
  rt_size_t rtt_console_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size) {
         
      rt_size_t ret= 0;
      
      if (console_read_count != console_receive_count) {
         
          *(char *)buffer = console_receive_buf[console_read_count++];
          console_read_count %= 10;
          ret = 1;
      }
      
      return ret;
  }
  

• 初始化串口设备的ops

  rtt_console.type = RT_Device_Class_Char;
  rtt_console.rx_indicate = NULL;		// shell组件初始化时会修改该接口
  rtt_console.tx_complete = NULL;
  
  rtt_console.write = rtt_console_write;
  rtt_console.read = rtt_console_read;
  

• 对应串口的中断函数

  void USART1_IRQHandler() {
         
      uint8_t rch;
      
      rt_interrupt_enter();
      
  	if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) {
         		
  		rch = USART_ReceiveData(USART1);
  
          console_receive_buf[console_receive_count++] = rch;
          console_receive_count %= 10;
          rtt_console.rx_indicate(&rtt_console, 1);
  	}
      
      rt_interrupt_leave();
  }
  

• 编译烧写，测试 list_thread 命令
  

• 3.1.1 版本工程下载 RT-Thread-3.1.1-FinSH

---

3. RT-Thread 3.1.3版本添加FinSH

• 3.1.2版本与3.1.1类似，3.1.3版中去掉了设备模型。在finsh线程中可以看到

  static int finsh_getchar(void)
  {
         
  	...
      extern char rt_hw_console_getchar(void);
      return rt_hw_console_getchar();
  	...
  }
  
  void finsh_thread_entry(void *parameter)
  {
         
      int ch;
      ...
  	while (1)
      {
         
          ch = finsh_getchar();
          ...
      }
  }
  

  所以只需要实现函数 char rt_hw_console_getchar(void) 即可。
• 创建一个信号量用于通知 rt_hw_console_getchar 取字符。

  struct rt_semaphore rec_sem;
  
  char console_receive_buf[10] = {
         0};
  int console_receive_count = 0;
  int console_read_count = 0;
  
  rt_sem_init(&rec_sem, "rec_sem", 0, RT_IPC_FLAG_FIFO);
  

• rt_hw_console_getchar 实现

  char rt_hw_console_getchar(void) {
         
      char ch = -1;
      
      rt_sem_take(&rec_sem, RT_WAITING_FOREVER);
      
      if (console_read_count != console_receive_count) {
         
          ch = console_receive_buf[console_read_count++];
          console_read_count %= 10;
      }
      
      return ch;
  }
  

• 串口的中断函数中释放信号量。

  rt_sem_release(&rec_sem);
  

• 3.1.3 版本工程下载 RT-Thread-3.1.3-FinSH