CentOS8/CentOS7 搭建k8s集群

本文章仅作为个人笔记

k8s官方安装文档

• 关闭selinux swap 防火墙等，不安全，有自我见解者可略过

    setenforce 0
    sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config
    iptables -F
    iptables -X
    systemctl stop firewalld
    swapoff -a
    sed -i "s/\/dev\/mapper\/centos-swap/\#\/dev\/mapper\/centos-swap/g" /etc/fstab
    cat <  /etc/sysctl.d/k8s.conf
    net.bridge.bridge-nf-call-ip6tables = 1
    net.bridge.bridge-nf-call-iptables = 1
    EOF
    sysctl --system
  

• docker 安装(已安装可不处理)

    yum install -y yum-utils dnf
    yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
    dnf install -y https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.2.13-3.1.el7.x86_64.rpm
    yum install docker-ce -y
    service docker start
    # 修改国内仓库，不需要可略过
    vim /etc/docker/daemon.json
    
        {
            "registry-mirrors": [
                "https://registry.docker-cn.com"
            ],
            "exec-opts":["native.cgroupdriver=systemd"]
        }
    
    systemctl daemon-reload
    service docker restart
  

• kubernetes 安装(主从节点都运行)

    cat < /etc/yum.repos.d/kubernetes.repo
    [kubernetes]
    name=Kubernetes
    baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
    enabled=1
    gpgcheck=1
    repo_gpgcheck=1
    gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
    EOF
    yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes
    systemctl enable --now kubelet
    service kubelet start
    modprobe br_netfilter
    lsmod | grep br_netfilter
    # 测试环境是否ok
    kubeadm config images pull
    # 查看kubernetes版本
    kubeadm version
    # 配置安装插件版本 例如( kubeadm config images list --kubernetes-version v1.19.0 )
    kubeadm config images list --kubernetes-version 
    # 如果是国内服务器构建请务必操作曲线救国，否则请无视
    ## 曲线救国--------------------start
    # 曲线救国，创建国内镜像 [参考](https://blog.csdn.net/sjyu_ustc/article/details/79990858)
    # 查看需要的镜像及版本(这里是个人安装时的版本，因时而异,自行判断。)
    kubeadm config images list
  
        k8s.gcr.io/kube-apiserver:v1.19.0
        k8s.gcr.io/kube-controller-manager:v1.19.0
        k8s.gcr.io/kube-scheduler:v1.19.0
        k8s.gcr.io/kube-proxy:v1.19.0
        k8s.gcr.io/pause:3.2
        k8s.gcr.io/etcd:3.4.9-1
        k8s.gcr.io/coredns:1.7.0
  
    # 下载对应版本镜像(这里的 makai554892700 可更改为自己的账号镜像,latest可改为对应版本，但是目前本人并未能获取到最新版本，请酌情处理,其中各版本请自行修改)
    docker pull makai554892700/kube-apiserver:latest
    docker pull makai554892700/kube-controller-manager:latest
    docker pull makai554892700/kube-scheduler:latest
    docker pull makai554892700/kube-proxy:latest
    docker pull makai554892700/etcd:latest
    docker pull makai554892700/coredns:latest
    docker pull makai554892700/pause:latest
    # 改名下载的镜像为线上的镜像(欺骗镜像下载器以曲线救国,其中各版本请自行修改)
    docker tag makai554892700/kube-apiserver:latest k8s.gcr.io/kube-apiserver:v1.19.0
    docker tag makai554892700/kube-controller-manager:latest k8s.gcr.io/kube-controller-manager:v1.19.0
    docker tag makai554892700/kube-scheduler:latest k8s.gcr.io/kube-scheduler:v1.19.0
    docker tag makai554892700/kube-proxy:latest k8s.gcr.io/kube-proxy:v1.19.0
    docker tag makai554892700/etcd:latest k8s.gcr.io/etcd:3.4.9-1
    docker tag makai554892700/coredns:latest k8s.gcr.io/coredns:1.7.0
    docker tag makai554892700/pause:latest k8s.gcr.io/pause:3.2
    ## 曲线救国--------------------end
  

• 主节点运行

    # 在初始化的过程中可能会卡住（特别是公网，如果出现则修改/etc/kubernetes/manifests/etcd.yaml文件，未出现请无视下面一句 ）
    vim /etc/kubernetes/manifests/etcd.yaml
        - --listen-client-urls=https://127.0.0.1:2379
        - --listen-peer-urls=https://127.0.0.1:2380
    # 初始化 kubeadm
    kubeadm init --apiserver-advertise-address 0.0.0.0 --pod-network-cidr=10.244.0.0/16
    # 例如( kubeadm init --apiserver-advertise-address 0.0.0.0 --pod-network-cidr=10.244.0.0/16 )
    # 如果有可用镜像可使用下面的命令处理，否则请无视
    # kubeadm init --kubernetes-version= --image-repository registry.aliyuncs.com/google_containers --apiserver-advertise-address  --pod-network-cidr=10.244.0.0/16
    # 根据提示创建kubectl
    rm -rf $HOME/.kube
    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config
    # 获取token,复制token备用
    kubeadm token list
    # 若输出的token创建时间超过24小时可运行下面的命令重新创建，否则请无视
    kubeadm token create
    # 获取token sha256，复制备用
    openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | openssl dgst -sha256 -hex | sed 's/^.* //'
    # 安装网络插件 flannel [遇坑参考1](https://blog.csdn.net/qq_23146469/article/details/102486500)
    # 遇坑 [参考2](https://blog.csdn.net/sinat_35534641/article/details/83833797)
    wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
    kubectl apply -f kube-flannel.yml
    # 查看 flannel 是否正常运行
    kubectl get pod -n kube-system
    # 查看日志(根据实际情况修改 kube-flannel-ds-amd64-q8kvb )
    kubectl describe pod kube-flannel-ds-amd64-q8kvb -n kube-system
    # 如果安装未出现问题到此便结束了，如果flannel安装不成功继续曲线救国
    kubeadm reset
    kubeadm init --apiserver-advertise-address 0.0.0.0 --pod-network-cidr=10.244.0.0/16
    rm -rf $HOME/.kube
    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config
    docker pull makai554892700/flannel:latest
    docker tag makai554892700/flannel:latest quay.io/coreos/flannel:v0.12.0-amd64
    kubectl apply -f kube-flannel.yml
  

• 节点加入 官方文档

• 子节点运行

    # 将主节点的 /run/systemd/resolve/resolv.conf 文件复制到子节点同目录 /run/systemd/resolve/resolv.conf
    # 加入主节点 例如 ( kubeadm join 192.168.169.128:6443 --token j0xuqn.u9fge2i8uo7dpxsj --discovery-token-ca-cert-hash sha256:93628f27ce0f5738fe1e1b63b1610c60d82a3d55669a025be841c94d547fdf85 )
    kubeadm join --token  : --discovery-token-ca-cert-hash sha256:
  

• 主节点运行

        # 查看节点
        kubectl get nodes
  

• 删除节点

  • 子节点运行

      # 重置 kubeadm 状态
      kubeadm reset
    

  • 主节点运行，例如( kubectl drain 192.168.169.134 --delete-local-data --force --ignore-daemonsets )

      kubectl delete pod kube-proxy-fbp57 -n kube-system
      kubectl drain  --delete-local-data --force --ignore-daemonsets
    

• k8s 安装ui界面 dashboard

    # 下载官方源
    wget  https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.0-rc7/aio/deploy/recommended.yaml
    # 编辑文档
    vim recommended.yaml
    
            kind: Service
            apiVersion: v1
            metadata:
              labels:
                k8s-app: kubernetes-dashboard
              name: kubernetes-dashboard
              namespace: kubernetes-dashboard
            spec:
              type: NodePort
              ports:
                - port: 443
                  targetPort: 8443
                  nodePort: 30000
              selector:
                k8s-app: kubernetes-dashboard
    # 创建使用
    kubectl create -f recommended.yaml
    # 查看运行的服务
    kubectl get svc -n kubernetes-dashboard
    # 开启代理用于外界访问例
    kubectl proxy --address=0.0.0.0 --disable-filter=true
    # 查看权限问题 kubectl logs -f -n kubernetes-dashboard
    # 解决方法 kubectl create clusterrolebinding serviceaccount-cluster-admin --clusterrole=cluster-admin --group=system:serviceaccount
    # 访问 https://:30000 访问dashboard 例如(https://192.168.169.128:30000/)
    # 查看token
    kubectl -n kube-system describe $(kubectl -n kube-system get secret -n kube-system -o name | grep namespace) | grep token