Kaldi中DNN的实现

      本文主要讲解kaldi中run.sh和run_tdnn.sh的代码，从中了解Kaldi的DNN的实现。

         在 kaldi 训练过程中，DNN 的训练是主要是依赖于 GMM-HMM 模型的，通过 GMM-HMM 模型得到 DNN 声学模型的输出结果(在 get_egs.sh 脚本中可以看到这一过程)。因此训练一个好的 GMM-HMM 模型是 kaldi 语音识别的关键。

        所以在run.sh中可以看到，GMM-HMM 训练了 5 次，得到一个相对比较不错的模型，然后训练 nnet3 模型以及 chain 模型，最后测试精度。

整体过程如图：

# Train a monophone model on delta features.训练单音素HMM模型，每两次迭代进行一次对齐操作
#主要是对齐音素和每一帧音频
steps/train_mono.sh --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/mono || exit 1;

# Decode with the monophone model.单音素解码，生成了用于解码的HCLG.fst
utils/mkgraph.sh data/lang_test exp/mono exp/mono/graph || exit 1;
steps/decode.sh --cmd "$decode_cmd" --config conf/decode.config --nj 10 \
  exp/mono/graph data/dev exp/mono/decode_dev
steps/decode.sh --cmd "$decode_cmd" --config conf/decode.config --nj 10 \
  exp/mono/graph data/test exp/mono/decode_test

# Get alignments from monophone system. 从单音素系统中获取对齐方式
steps/align_si.sh --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/mono exp/mono_ali || exit 1;

# Train the first triphone pass model tri1 on delta + delta-delta features. 训练与上下文相关的三音子模型
steps/train_deltas.sh --cmd "$train_cmd" \
 2500 20000 data/train data/lang exp/mono_ali exp/tri1 || exit 1;

# decode tri1 #三音素解码
utils/mkgraph.sh data/lang_test exp/tri1 exp/tri1/graph || exit 1;
steps/decode.sh --cmd "$decode_cmd" --config conf/decode.config --nj 10 \
  exp/tri1/graph data/dev exp/tri1/decode_dev
steps/decode.sh --cmd "$decode_cmd" --config conf/decode.config --nj 10 \
  exp/tri1/graph data/test exp/tri1/decode_test

# align tri1 校准
steps/align_si.sh --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/tri1 exp/tri1_ali || exit 1;

# train tri2 [delta+delta-deltas]  同上
steps/train_deltas.sh --cmd "$train_cmd" \
 2500 20000 data/train data/lang exp/tri1_ali exp/tri2 || exit 1;

# decode tri2
utils/mkgraph.sh data/lang_test exp/tri2 exp/tri2/graph
steps/decode.sh --cmd "$decode_cmd" --config conf/decode.config --nj 10 \
  exp/tri2/graph data/dev exp/tri2/decode_dev
steps/decode.sh --cmd "$decode_cmd" --config conf/decode.config --nj 10 \
  exp/tri2/graph data/test exp/tri2/decode_test

# Align training data with the tri2 model.  
steps/align_si.sh --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/tri2 exp/tri2_ali || exit 1;

# Train the second triphone pass model tri3a on LDA+MLLT features.  tri3a上加上lda + mllt。用来进行线性判别分析和最大似然线性转换
steps/train_lda_mllt.sh --cmd "$train_cmd" \
 2500 20000 data/train data/lang exp/tri2_ali exp/tri3a || exit 1;
 
# Run a test decode with the tri3a model.  
utils/mkgraph.sh data/lang_test exp/tri3a exp/tri3a/graph || exit 1;
steps/decode.sh --cmd "$decode_cmd" --nj 10 --config conf/decode.config \
  exp/tri3a/graph data/dev exp/tri3a/decode_dev
steps/decode.sh --cmd "$decode_cmd" --nj 10 --config conf/decode.config \
  exp/tri3a/graph data/test exp/tri3a/decode_test

# align tri3a with fMLLR

steps/align_fmllr.sh --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/tri3a exp/tri3a_ali || exit 1;

# Train the third triphone pass model tri4a on LDA+MLLT+SAT features.
# From now on, we start building a more serious system with Speaker
# Adaptive Training (SAT).  加上说话人SAT进行自然语言训练,训练发音人自适应
steps/train_sat.sh --cmd "$train_cmd" \
  2500 20000 data/train data/lang exp/tri3a_ali exp/tri4a || exit 1;

# decode tri4a
utils/mkgraph.sh data/lang_test exp/tri4a exp/tri4a/graph
steps/decode_fmllr.sh --cmd "$decode_cmd" --nj 10 --config conf/decode.config \
  exp/tri4a/graph data/dev exp/tri4a/decode_dev
steps/decode_fmllr.sh --cmd "$decode_cmd" --nj 10 --config conf/decode.config \
  exp/tri4a/graph data/test exp/tri4a/decode_test
  
# align tri4a with fMLLR
steps/align_fmllr.sh  --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/tri4a exp/tri4a_ali

# Train tri5a, which is LDA+MLLT+SAT
# Building a larger SAT system. You can see the num-leaves is 3500 and tot-gauss is 100000

steps/train_sat.sh --cmd "$train_cmd" \
  3500 100000 data/train data/lang exp/tri4a_ali exp/tri5a || exit 1;
  
# decode tri5a
utils/mkgraph.sh data/lang_test exp/tri5a exp/tri5a/graph || exit 1;
steps/decode_fmllr.sh --cmd "$decode_cmd" --nj 10 --config conf/decode.config \
   exp/tri5a/graph data/dev exp/tri5a/decode_dev || exit 1;
steps/decode_fmllr.sh --cmd "$decode_cmd" --nj 10 --config conf/decode.config \
   exp/tri5a/graph data/test exp/tri5a/decode_test || exit 1;
   
# align tri5a with fMLLR
steps/align_fmllr.sh --cmd "$train_cmd" --nj 10 \
  data/train data/lang exp/tri5a exp/tri5a_ali || exit 1;

# nnet3
local/nnet3/run_tdnn.sh

# chain
local/chain/run_tdnn.sh

# getting results (see RESULTS file)
for x in exp/*/decode_test; do [ -d $x ] && grep WER $x/cer_* | utils/best_wer.sh; done 2>/dev/null
for x in exp/*/*/decode_test; do [ -d $x ] && grep WER $x/cer_* | utils/best_wer.sh; done 2>/dev/null

exit 0;

以下是run_tdnn.sh的代码

#!/usr/bin/env bash

# This script is based on swbd/s5c/local/nnet3/run_tdnn.sh

# this is the standard "tdnn" system, built in nnet3; it's what we use to
# call multi-splice.

# At this script level we don't support not running on GPU, as it would be painfully slow.
# If you want to run without GPU you'd have to call train_tdnn.sh with --gpu false,
# --num-threads 16 and --minibatch-size 128.
set -e

stage=0
train_stage=-10
affix=
common_egs_dir=

# training options
initial_effective_lrate=0.0015
final_effective_lrate=0.00015
num_epochs=4
num_jobs_initial=2
num_jobs_final=12
remove_egs=true

# feature options
use_ivectors=true

# End configuration section.

. ./cmd.sh
. ./path.sh
. ./utils/parse_options.sh

if ! cuda-compiled; then
  cat < $dir/configs/network.xconfig
  input dim=100 name=ivector
  input dim=43 name=input

  # please note that it is important to have input layer with the name=input
  # as the layer immediately preceding the fixed-affine-layer to enable
  # the use of short notation for the descriptor
  fixed-affine-layer name=lda input=Append(-2,-1,0,1,2,ReplaceIndex(ivector, t, 0)) affine-transform-file=$dir/configs/lda.mat

  # the first splicing is moved before the lda layer, so no splicing here
  relu-batchnorm-layer name=tdnn1 dim=850
  relu-batchnorm-layer name=tdnn2 dim=850 input=Append(-1,0,2)
  relu-batchnorm-layer name=tdnn3 dim=850 input=Append(-3,0,3)
  relu-batchnorm-layer name=tdnn4 dim=850 input=Append(-7,0,2)
  relu-batchnorm-layer name=tdnn5 dim=850 input=Append(-3,0,3)
  relu-batchnorm-layer name=tdnn6 dim=850
  output-layer name=output input=tdnn6 dim=$num_targets max-change=1.5
EOF
#将网络配置转换为nnet3的网络配置文件
  steps/nnet3/xconfig_to_configs.py --xconfig-file $dir/configs/network.xconfig --config-dir $dir/configs/
fi

if [ $stage -le 8 ]; then
  if [[ $(hostname -f) == *.clsp.jhu.edu ]] && [ ! -d $dir/egs/storage ]; then
    utils/create_split_dir.pl \
     /export/b0{5,6,7,8}/$USER/kaldi-data/egs/aishell-$(date +'%m_%d_%H_%M')/s5/$dir/egs/storage $dir/egs/storage
  fi

#执行 train_dnn.py来对feats内容进行训练
  steps/nnet3/train_dnn.py --stage=$train_stage \
    --cmd="$decode_cmd" \
    --feat.online-ivector-dir exp/nnet3/ivectors_${train_set} \
    --feat.cmvn-opts="--norm-means=false --norm-vars=false" \
    --trainer.num-epochs $num_epochs \
    --trainer.optimization.num-jobs-initial $num_jobs_initial \
    --trainer.optimization.num-jobs-final $num_jobs_final \
    --trainer.optimization.initial-effective-lrate $initial_effective_lrate \
    --trainer.optimization.final-effective-lrate $final_effective_lrate \
    --egs.dir "$common_egs_dir" \
    --cleanup.remove-egs $remove_egs \
    --cleanup.preserve-model-interval 500 \
    --use-gpu true \
    --feat-dir=data/${train_set}_hires \
    --ali-dir $ali_dir \
    --lang data/lang \
    --reporting.email="$reporting_email" \
    --dir=$dir  || exit 1;
fi

if [ $stage -le 9 ]; then
  # this version of the decoding treats each utterance separately
  # without carrying forward speaker information.
  for decode_set in dev test; do
    num_jobs=`cat data/${decode_set}_hires/utt2spk|cut -d' ' -f2|sort -u|wc -l`
    decode_dir=${dir}/decode_$decode_set
    steps/nnet3/decode.sh --nj $num_jobs --cmd "$decode_cmd" \
       --online-ivector-dir exp/nnet3/ivectors_${decode_set} \
       $graph_dir data/${decode_set}_hires $decode_dir || exit 1;
  done
fi

wait;
exit 0;