Python监听鼠标左键被点击，gogo，急停，

最后的核心目的是：为了对cscsgogo的中的进行急停

安装基本的软件包

import pyHook
# 注意事项，1、不要安装pyHook2 （会报错TypeError: MouseSwitch() missing 8 required positional arguments: 'msg', 'x', 'y', 'data', 'flags',）
# 在pycharm中创建python3.7的虚拟环境
# conda install swig 安装swig
# 去https://visualstudio.microsoft.com/visual-cpp-build-tools/中安装Microsoft Visual C++ 14.0  花费1个小时
# pip install PyHook3
import pythoncom
# pip install pywin32

以下是监听鼠标点击事件的code

# 监听到鼠标事件调用
def onMouseEvent(event):
    if(event.MessageName!="mouse move"):# 因为鼠标一动就会有很多mouse move，所以把这个过滤下
        print(event.MessageName)
    return True # 为True才会正常调用，如果为False的话，此次事件被拦截

def main():
    # 创建管理器
    hm = pyHook.HookManager()
    # 监听鼠标
    hm.MouseAll = onMouseEvent
    hm.HookMouse()
    # 循环监听
    pythoncom.PumpMessages()

if __name__ == "__main__":
    print("thi is main")
    main()

急停的基本逻辑是：

每次点击鼠标左键时，进入中断。在中断中进行急停判断。

逻辑是：如果此时A正在按下，点击n次D；如果此时D正在被按下，点击n次A；

n为几合适呢？

同时需需要求证的问题是，是否存在被VAC的可能？

--------------------

测试示例一：

import PyHook3
# 注意事项，1、不要安装pyHook2 （会报错TypeError: MouseSwitch() missing 8 required positional arguments: 'msg', 'x', 'y', 'data', 'flags',）
# 在pycharm中创建python3.7的虚拟环境
# conda install swig 安装swig
# 去https://visualstudio.microsoft.com/visual-cpp-build-tools/中安装Microsoft Visual C++ 14.0  花费1个小时
# pip install PyHook3
import pythoncom
# pip install pywin32

import keyboard
# 执行单元
# pip install keyboard

class glv():
    keyPressed = ""
    def __init__(self):
        keyPressed = ""

# 监听到鼠标事件调用
def onMouseEvent(event):
    # 因为鼠标一动就会有很多mouse move，所以把这个过滤下
    if(event.MessageName=="mouse left down"):
        pass

    return True # 为True才会正常调用，如果为False的话，此次事件被拦截

def onKeyboardEvent(event):
    # print(event.MessageName)

    if event.MessageName=="key down": #当按键被按下去之后，主要开始记录
        gv.keyPressed = chr(event.Ascii)
        # print("moving:{}".format(gv.keyPressed))

    if event.MessageName=="key up":
        if gv.keyPressed == 'a':
            print("stop with d")
            keyboard.write("d", delay=0.02)
        if gv.keyPressed == 'd':
            print("stop with a")
            keyboard.write("a", delay=0.02)
        if gv.keyPressed == 'w':
            print("stop with s")
            keyboard.write("s", delay=0.02)

    return True

def main():
    # 创建管理器
    hm = PyHook3.HookManager()
    # 监听鼠标
    hm.MouseAll = onMouseEvent
    hm.HookMouse()
    # 监听键盘
    hm.KeyDown = onKeyboardEvent
    hm.KeyUp = onKeyboardEvent
    hm.HookKeyboard()

    # 循环监听
    pythoncom.PumpMessages()

if __name__ == "__main__":
    print("thi is main")
    gv = glv()
    gv.keyPressed = ""
    main()

---------------

import time

import PyHook3
# 注意事项，1、不要安装pyHook2 （会报错TypeError: MouseSwitch() missing 8 required positional arguments: 'msg', 'x', 'y', 'data', 'flags',）
# 在pycharm中创建python3.7的虚拟环境
# conda install swig 安装swig
# 去https://visualstudio.microsoft.com/visual-cpp-build-tools/中安装Microsoft Visual C++ 14.0  花费1个小时
# pip install PyHook3
import pythoncom
# pip install pywin32

# import keyboard
# # 执行单元
# # pip install keyboard

import win32api
import win32con

from time import *

class glv():
    keyPressed = ""
    def __init__(self):
        keyPressed = ""

# 监听到鼠标事件调用
def onMouseEvent(event):
    # 因为鼠标一动就会有很多mouse move，所以把这个过滤下
    if(event.MessageName=="mouse left down"):
        gv.count = 0
        print("count is {}".format(gv.count))

    return True # 为True才会正常调用，如果为False的话，此次事件被拦截

def onKeyboardEvent(event):
    gv.count = gv.count + 1
    t = time()
    print("{:.2f}\t{}\t{}\t{}\tdelt={:.2f}".format(t,gv.count,event.MessageName, chr(event.Ascii),t-gv.lt))
    gv.lt = t
    # print(event.MessageName)
    if event.MessageName=="key down": #当按键被按下去之后，主要开始记录方向
        gv.keyPressed = chr(event.Ascii)
        return True

    if event.MessageName=="key up":
        sleep(0.005)
        if gv.keyPressed == 'a' or gv.keyPressed == 'A':
            # keyboard.press_and_release("d") #进行急停；

            # keyboard.press("d")
            # sleep(0.06)
            # keyboard.release("d")

            # for i in range(50):
            #     keyboard.press_and_release("d")

            win32api.keybd_event(68,0,0,0)
            sleep(0.06)
            win32api.keybd_event(68,0,win32con.KEYEVENTF_KEYUP,0)

            return True




    return True


def main():
    # 创建管理器
    hm = PyHook3.HookManager()
    # 监听鼠标
    hm.MouseAll = onMouseEvent
    hm.HookMouse()
    # 监听键盘
    hm.KeyDown = onKeyboardEvent
    hm.KeyUp = onKeyboardEvent
    hm.HookKeyboard()

    # 循环监听
    pythoncom.PumpMessages()

if __name__ == "__main__":
    print("thi is main")
    gv = glv()
    gv.keyPressed = ""
    gv.count = 0
    gv.lt = time()
    # gv.firsttime = 1
    main()

放弃了，虽然在按键的时间延迟上已经完美的模拟了手动急停的时间延迟，但是从实际的效果上看，还是达不到急停的效果；

--

测试三；结论放弃了，没有太大意义：

import time

import PyHook3
# 注意事项，1、不要安装pyHook2 （会报错TypeError: MouseSwitch() missing 8 required positional arguments: 'msg', 'x', 'y', 'data', 'flags',）
# 在pycharm中创建python3.7的虚拟环境
# conda install swig 安装swig
# 去https://visualstudio.microsoft.com/visual-cpp-build-tools/中安装Microsoft Visual C++ 14.0  花费1个小时
# pip install PyHook3
import pythoncom
# pip install pywin32

import win32api
# pip install pywin32

import win32con
# pip install pywin32
# http://blog.itpub.net/26736162/viewspace-2644877/  按键的键码

import keyboard
# 执行单元
# pip install keyboard

from time import *
from threading import Timer
import threading
import sys



class glv():
    keyPressed = ""
    def __init__(self):
        keyPressed = ""

# 监听到鼠标事件调用
def onMouseEvent(event):
    # 因为鼠标一动就会有很多mouse move，所以把这个过滤下
    if(event.MessageName=="mouse left down"):
        gv.count = 0
        gv.lt = time()
        print("count is {}".format(gv.count))

    return True # 为True才会正常调用，如果为False的话，此次事件被拦截

def onKeyboardEvent(event):
    gv.count = gv.count + 1
    t = time()
    print("{:.2f}\t{}\t{}\t{}\tdelt={:.2f}".format(t,gv.count,event.MessageName, chr(event.Ascii),t-gv.lt))
    gv.lt = t

    if event.MessageName=="key down": #当按键被按下去之后，主要开始记录方向
        gv.keyPressed = chr(event.Ascii)
        return True
    elif event.MessageName=="key up":
        if gv.keyPressed == 'a' or gv.keyPressed == 'A':

            # #3次代码急停1
            # keyboard.press("d")
            # sleep(0.098)
            # keyboard.release("d")

            #3次代码急停2
            # keyboard.press_and_release("d")

            #3次代码急停3
            # for i in range(20):
            #     keyboard.press_and_release("d")

            # #3次代码急停4
            # keyboard.press("a")
            # keyboard.press("w")
            # keyboard.press("s")
            # keyboard.press("d")
            # sleep(0.01)
            # keyboard.release("a")
            # keyboard.release("w")
            # keyboard.release("s")
            # keyboard.release("d")

            #3次代码急停5
            # keyboard.press("a")
            # sleep(0.005)
            # keyboard.release("a")

            # keyboard.press("d")
            # sleep(0.001)
            # keyboard.release("d")

            # 如果打开keycastow,则有急停的效果；
            # keyboard.press_and_release("a")
            # keyboard.press_and_release("d")


            # # 开不开keycastow都没有急停的效果
            # # keyboard.press_and_release("a")
            # keyboard.press_and_release("d")

            # keyboard.press_and_release("a") #按A的目的是为了夺取键盘的控制权
            # keyboard.press_and_release("d")

            # keyboard.write('adddddddddddddddddd')

            #在这里边按键,存在递归的现象,出不去
            keyboard.press_and_release("a")
            keyboard.press_and_release("a")
            keyboard.press_and_release("d")

            return True
        elif gv.keyPressed == 'w' or gv.keyPressed == 'W':
            return True

    if chr(event.Ascii) == 'm':#OVER
        sys.exit()
    elif chr(event.Ascii) == 'p': #BEGIN
        gv.start = 1
        return True
    elif chr(event.Ascii) == 'l' and gv.start == 1: #DO
        keyboard.press("a")
        sleep(1)
        keyboard.release("a")

        keyboard.press("d")
        sleep(0.07)
        keyboard.release("d")


        # for i in range(20):
        #     keyboard.press_and_release("a")

        # keyboard.press("d")
        # sleep(0.07)
        # keyboard.release("a")

        return True

    #永远不能删除！！！
    return True

def main():
    # 创建管理器
    hm = PyHook3.HookManager()
    # 监听鼠标
    hm.MouseAll = onMouseEvent
    hm.HookMouse()
    # 监听键盘
    hm.KeyDown = onKeyboardEvent
    hm.KeyUp = onKeyboardEvent
    hm.HookKeyboard()

    # 循环监听
    pythoncom.PumpMessages()


if __name__ == "__main__":
    print("thi is main")
    gv = glv()
    gv.keyPressed = ""
    gv.count = 0

    gv.lt = time()
    gv.start = 0
    sleep(1)

    main()