怎么看mmdetection版本_mmdetection源码阅读笔记（2）--Loss
之前做完比赛过后计划看看mmdetection的源码写点blog,写了两篇过后忙其他事去了,这里就接着把之前没写完的东西补上。
之前写了模型和网络的创建，这里就主要写下训练过程中具体的loss,主要分为以下几部分
RPN_loss
bbox_loss
mask_loss
RPN_loss
rpn_loss的实现具体定义在mmdet/models/anchor_head/rpn_head.py
def loss(self,
cls_scores,
bbox_preds,
gt_bboxes,
img_metas,
cfg,
gt_bboxes_ignore=None):
losses = super(RPNHead, self).loss(
cls_scores,
bbox_preds,
gt_bboxes,
None,
img_metas,
cfg,
gt_bboxes_ignore=gt_bboxes_ignore)
return dict(
loss_rpn_cls=losses['loss_cls'], loss_rpn_bbox=losses['loss_bbox'])
具体的计算方式定义在其父类mmdet/models/anchor_heads/anchor_head.py,主要是loss和loss_single两个函数。
先看loss函数
def loss(self,
cls_scores,
bbox_preds,
gt_bboxes,
gt_labels,
img_metas,
cfg,
gt_bboxes_ignore=None):
featmap_sizes = [featmap.size()[-2:] for featmap in cls_scores]
assert len(featmap_sizes) == len(self.anchor_generators)
anchor_list, valid_flag_list = self.get_anchors(
featmap_sizes, img_metas)
label_channels = self.cls_out_channels if self.use_sigmoid_cls else 1
cls_reg_targets = anchor_target(
anchor_list,
valid_flag_list,
gt_bboxes,
img_metas,
self.target_means,
self.target_stds,
cfg,
gt_bboxes_ignore_list=gt_bboxes_ignore,
gt_labels_list=gt_labels,
label_channels=label_channels,
sampling=self.sampling)
if cls_reg_targets is None:
return None
(labels_list, label_weights_list, bbox_targets_list, bbox_weights_list,
num_total_pos, num_total_neg) = cls_reg_targets
num_total_samples = (
num_total_pos + num_total_neg if self.sampling else num_total_pos)
losses_cls, losses_bbox = multi_apply(
self.loss_single,
cls_scores,
bbox_preds,
labels_list,
label_weights_list,
bbox_targets_list,
bbox_weights_list,
num_total_samples=num_total_samples,
cfg=cfg)
return dict(loss_cls=losses_cls, loss_bbox=losses_bbox)
这个主要做了两个事
生成anchor 和对应的 target
计算loss
首先,在此时rpn的输出为feature map中每个位置的anchor 分类的score以及该anchor 的bbox的修正值,我们要通过和gt计算loss来优化我们的网络，但是我们的gt是一堆人工标注的bbox,无法直接计算loss。所以,我们应该要先获取到anchor 然后将这些anchor 和 gt 对比在分别得到正负样本以及对应的target,之后我们才能计算得到loss。
所以第一步通过anchor_list, valid_flag_list = self.get_anchors(featmap_sizes, img_metas) 获取到了所有的anchor 以及一个 是否有效的flag (根据bbox是否超出图片边界来计算。)
拿到了所有的anchor之后就是和gt对比来区分正负样本以及生成label了,通过定义在mmdet/core/anchor/anchor_target.py的anchor_target()实现。
在这个函数中调用assigner将anchor 和gt关联起来，得到正样本和负样本,并用sampler将这些结果进行封装，方便之后使用。
得到了target过后，就是计算loss了,在self.loss_single中，
def loss_single(self, cls_score, bbox_pred, labels, label_weights,
bbox_targets, bbox_weights, num_total_samples, cfg):
# classification loss
labels = labels.reshape(-1)
label_weights = label_weights.reshape(-1)
cls_score = cls_score.permute(0, 2, 3,
1).reshape(-1, self.cls_out_channels)
loss_cls = self.loss_cls(
cls_score, labels, label_weights, avg_factor=num_total_samples)
# regression loss
bbox_targets = bbox_targets.reshape(-1, 4)
bbox_weights = bbox_weights.reshape(-1, 4)
bbox_pred = bbox_pred.permute(0, 2, 3, 1).reshape(-1, 4)
loss_bbox = self.loss_bbox(
bbox_pred,
bbox_targets,
bbox_weights,
avg_factor=num_total_samples)
return loss_cls, loss_bbox
这里用的loss就是常见的CrossEntropyLoss和SmoothL1Loss
bbox_loss
之前的rpn_loss是对候选框的第一次修正，这里的bbox_loss就是第二次修正了，两者的实际差别主要体现在分类上，在rpn阶段只分两类(前景和背景),这里分类数为N+1(真实类别+背景)
具体定义在mmdet/models/bbox_heads/bbox_head.py
def loss(self,
cls_score,
bbox_pred,
labels,
label_weights,
bbox_targets,
bbox_weights,
reduce=True):
losses = dict()
if cls_score is not None:
losses['loss_cls'] = self.loss_cls(
cls_score, labels, label_weights, reduce=reduce)
losses['acc'] = accuracy(cls_score, labels)
if bbox_pred is not None:
pos_inds = labels > 0
if self.reg_class_agnostic:
pos_bbox_pred = bbox_pred.view(bbox_pred.size(0), 4)[pos_inds]
else:
pos_bbox_pred = bbox_pred.view(bbox_pred.size(0), -1,
4)[pos_inds, labels[pos_inds]]
losses['loss_bbox'] = self.loss_bbox(
pos_bbox_pred,
bbox_targets[pos_inds],
bbox_weights[pos_inds],
avg_factor=bbox_targets.size(0))
return losses
可以看到和rpn loss相比，这里要简单很多，因为这里只包含了rpn loss中实际计算loss的部分，但是他也同样需要rpn中的assign和sample操作，两者的区别只是assign的输入不同，rpn的assign输入是该图所有的anchor, bbox部分assign的输入就是rpn的输出。这里的loss和rpn中的计算方式完全一样，就不在赘述了。
mask_loss
mask部分计算loss之前也有一个获取target的步骤。
mmdet/models/mask_heads/fcn_mask_head.py
def get_target(self, sampling_results, gt_masks, rcnn_train_cfg):
pos_proposals = [res.pos_bboxes for res in sampling_results]
pos_assigned_gt_inds = [
res.pos_assigned_gt_inds for res in sampling_results
]
mask_targets = mask_target(pos_proposals, pos_assigned_gt_inds,
gt_masks, rcnn_train_cfg)
return mask_targets
这里获取target相对之前来说就要简单点了，通过定义在mmdet/core/mask/mask_target.py的mask_target()取到和prooisals相同大小的mask就行了。
def mask_target(pos_proposals_list, pos_assigned_gt_inds_list, gt_masks_list,
cfg):
cfg_list = [cfg for _ in range(len(pos_proposals_list))]
mask_targets = map(mask_target_single, pos_proposals_list,
pos_assigned_gt_inds_list, gt_masks_list, cfg_list)
mask_targets = torch.cat(list(mask_targets))
return mask_targets
def mask_target_single(pos_proposals, pos_assigned_gt_inds, gt_masks, cfg):
mask_size = cfg.mask_size
num_pos = pos_proposals.size(0)
mask_targets = []
if num_pos > 0:
proposals_np = pos_proposals.cpu().numpy()
pos_assigned_gt_inds = pos_assigned_gt_inds.cpu().numpy()
for i in range(num_pos):
gt_mask = gt_masks[pos_assigned_gt_inds[i]]
bbox = proposals_np[i, :].astype(np.int32)
x1, y1, x2, y2 = bbox
w = np.maximum(x2 - x1 + 1, 1)
h = np.maximum(y2 - y1 + 1, 1)
# mask is uint8 both before and after resizing
target = mmcv.imresize(gt_mask[y1:y1 + h, x1:x1 + w],
(mask_size, mask_size))
mask_targets.append(target)
mask_targets = torch.from_numpy(np.stack(mask_targets)).float().to(
pos_proposals.device)
else:
mask_targets = pos_proposals.new_zeros((0, mask_size, mask_size))
return mask_targets
而loss部分也比较简单，也是用的CrossEntropyLoss。
def loss(self, mask_pred, mask_targets, labels):
loss = dict()
if self.class_agnostic:
loss_mask = self.loss_mask(mask_pred, mask_targets,
torch.zeros_like(labels))
else:
loss_mask = self.loss_mask(mask_pred, mask_targets, labels)
loss['loss_mask'] = loss_mask
return loss
总结
总的来说这些loss还是算比较好理解的，看起来有三部分的loss,但是实际上每个部分的都差不多。
下一篇就准备写下整个的训练流程了,相当于将前面这三篇给连起来,有个更具体的理解。