Kin__Zhang

【Autoware】Ubuntu 18.04 ssdcaffe安装与Autoware 检测节点运行

Ubuntu 18.04 + 1.14 Autoware USE CPU&GPU

安装caffe
- 系统依赖项
- 获取ssd版caffe
- 编译前工作
- - Makefile.config
  - Makefile
- 编译
- - 进入文件 DEFINE CPU_ONLY
  - 可能会遇到的问题
  - - /usr/bin/ld: cannot find -lopenblas
    - 更多问题见引用参考
- 导入模型文件
Autoware 适配
- 修改CMakeLists.txt
- 链接库
- 修改launch 虽然界面也能勾选
- 编译Autoware
运行
- 运行runtime_manager
- - 播放BAG
- 运行vision_ssd_detect节点
效果示意
GPU版本的修改为：
- CUDA安装
- caffe里的Makefile.config
- 关于Eigen的版本
- - 源码安装法
- 编译cafffe
- - 报错类型
  - - atal error: caffe/caffe.hpp: No such file or directory #include "caffe/caffe.hpp"
    - make test -j8的时候报错
- 编译Autoware with CUDA

引用参考:

Ubuntu 16.04配置caffe-ssd
这篇应该说修改指南最全的一个了… 蟹老板之前找了好多都无效，JMK找到的这版，但是运行起autoware的vision_ssd_detect还是需要其他操作，所以前半部分可能就是这篇里的一些操作
特别鸣谢：蟹老板和JMK的贡献！非常给力我算是照着他们的流程走顺便记录了一下而已…

首先写一下为什么不直接：sudo apt install caffe-cpu 因为… 改不了model【或者说我不知道model的路径在哪里，apt install下载下来也没找到所以就还是采取了源码安装的方法】
感觉写完好长哦… 等自己电脑装的时候再录个屏大家倍速播放就好了…
GPU版请下拉到GPU

安装caffe

系统依赖项

sudo apt-get install libprotobuf-dev libleveldb-dev libsnappy-dev libopencv-dev
sudo apt-get install libhdf5-serial-dev protobuf-compiler
sudo apt-get install --no-install-recommends libboost-all-dev
sudo apt-get install libatlas-base-dev
sudo apt-get install python-dev
sudo apt-get install libgflags-dev libgoogle-glog-dev liblmdb-dev

获取ssd版caffe

说明：SSD采用的是在caffe文件夹中内嵌例程的方式，作者改动了原版caffe，所以你需要把原来的caffe文件夹移除，git命令会新建一个带有SSD程序的caffe文件夹，当然，这个新的caffe要重新编译一次。这里我直接拉取了gitee的链接下载风驰电掣，原github链接还是点击此处

git clone https://gitee.com/kin_zhang/caffe.git
cd caffe
git checkout ssd

注意一定要切换到ssd分支，如图：

编译前工作

Makefile.config

复制样例并修改Makefile.config文件：

cd caffe
cp Makefile.config.example Makefile.config
gedit Makefile.config

这是修改好后的直接复制替换：【注意注释了CUDA 不使用CPU】

## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!

# cuDNN acceleration switch (uncomment to build with cuDNN).
# USE_CUDNN := 1

# CPU-only switch (uncomment to build without GPU support).
 CPU_ONLY := 1

# uncomment to disable IO dependencies and corresponding data layers
# USE_OPENCV := 0
# USE_LEVELDB := 0
# USE_LMDB := 0

# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
#	You should not set this flag if you will be reading LMDBs with any
#	possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1

# Uncomment if you're using OpenCV 3
 OPENCV_VERSION := 3

# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
# CUSTOM_CXX := g++

# CUDA directory contains bin/ and lib/ directories that we need.
# CUDA_DIR := /usr/local/cuda
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr

# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the lines after *_35 for compatibility.
# CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
#             -gencode arch=compute_20,code=sm_21 \
#            -gencode arch=compute_30,code=sm_30 \
#            -gencode arch=compute_35,code=sm_35 \
#            -gencode arch=compute_50,code=sm_50 \
#            -gencode arch=compute_52,code=sm_52 \
#            -gencode arch=compute_61,code=sm_61

# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
# BLAS := atlas
BLAS := open
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
# BLAS_INCLUDE := /path/to/your/blas
# BLAS_LIB := /path/to/your/blas

# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib

# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
# MATLAB_DIR := /usr/local
# MATLAB_DIR := /Applications/MATLAB_R2012b.app

# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
		/usr/lib/python2.7/dist-packages/numpy/core/include
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
# ANACONDA_HOME := $(HOME)/anaconda2
# PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
		$(ANACONDA_HOME)/include/python2.7 \
		$(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include \

# Uncomment to use Python 3 (default is Python 2)
# PYTHON_LIBRARIES := boost_python3 python3.5m
# PYTHON_INCLUDE := /usr/include/python3.5m \
#                 /usr/lib/python3.5/dist-packages/numpy/core/include

# We need to be able to find libpythonX.X.so or .dylib.
PYTHON_LIB := /usr/lib
# PYTHON_LIB := $(ANACONDA_HOME)/lib

# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib

# Uncomment to support layers written in Python (will link against Python libs)
 WITH_PYTHON_LAYER := 1

# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu/hdf5/serial

# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib

# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1

# N.B. both build and distribute dirs are cleared on `make clean`
BUILD_DIR := build
DISTRIBUTE_DIR := distribute

# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1

# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0

# enable pretty build (comment to see full commands)
Q ?= @

具体的修改为：

CPU_ONLY := 1
OPENCV_VERSION := 3
注释掉了CUDA的东西：

# CUDA directory contains bin/ and lib/ directories that we need.
# CUDA_DIR := /usr/local/cuda
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr

# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the lines after *_35 for compatibility.
# CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
#             -gencode arch=compute_20,code=sm_21 \
#            -gencode arch=compute_30,code=sm_30 \
#            -gencode arch=compute_35,code=sm_35 \
#            -gencode arch=compute_50,code=sm_50 \
#            -gencode arch=compute_52,code=sm_52 \
#            -gencode arch=compute_61,code=sm_61

WITH_PYTHON_LAYER := 1
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu/hdf5/serial

Makefile

cd caffe
gedit Makefile

不想自己找的就直接复制全选粘贴：想看改了哪里的请跳过这部分点击此处后面

PROJECT := caffe

CONFIG_FILE := Makefile.config
# Explicitly check for the config file, otherwise make -k will proceed anyway.
ifeq ($(wildcard $(CONFIG_FILE)),)
$(error $(CONFIG_FILE) not found. See $(CONFIG_FILE).example.)
endif
include $(CONFIG_FILE)

BUILD_DIR_LINK := $(BUILD_DIR)
ifeq ($(RELEASE_BUILD_DIR),)
	RELEASE_BUILD_DIR := .$(BUILD_DIR)_release
endif
ifeq ($(DEBUG_BUILD_DIR),)
	DEBUG_BUILD_DIR := .$(BUILD_DIR)_debug
endif

DEBUG ?= 0
ifeq ($(DEBUG), 1)
	BUILD_DIR := $(DEBUG_BUILD_DIR)
	OTHER_BUILD_DIR := $(RELEASE_BUILD_DIR)
else
	BUILD_DIR := $(RELEASE_BUILD_DIR)
	OTHER_BUILD_DIR := $(DEBUG_BUILD_DIR)
endif

# All of the directories containing code.
SRC_DIRS := $(shell find * -type d -exec bash -c "find {} -maxdepth 1 \
	\( -name '*.cpp' -o -name '*.proto' \) | grep -q ." \; -print)

# The target shared library name
LIBRARY_NAME := $(PROJECT)
LIB_BUILD_DIR := $(BUILD_DIR)/lib
STATIC_NAME := $(LIB_BUILD_DIR)/lib$(LIBRARY_NAME).a
DYNAMIC_VERSION_MAJOR 		:= 1
DYNAMIC_VERSION_MINOR 		:= 0
DYNAMIC_VERSION_REVISION 	:= 0-rc3
DYNAMIC_NAME_SHORT := lib$(LIBRARY_NAME).so
#DYNAMIC_SONAME_SHORT := $(DYNAMIC_NAME_SHORT).$(DYNAMIC_VERSION_MAJOR)
DYNAMIC_VERSIONED_NAME_SHORT := $(DYNAMIC_NAME_SHORT).$(DYNAMIC_VERSION_MAJOR).$(DYNAMIC_VERSION_MINOR).$(DYNAMIC_VERSION_REVISION)
DYNAMIC_NAME := $(LIB_BUILD_DIR)/$(DYNAMIC_VERSIONED_NAME_SHORT)
COMMON_FLAGS += -DCAFFE_VERSION=$(DYNAMIC_VERSION_MAJOR).$(DYNAMIC_VERSION_MINOR).$(DYNAMIC_VERSION_REVISION)

##############################
# Get all source files
##############################
# CXX_SRCS are the source files excluding the test ones.
CXX_SRCS := $(shell find src/$(PROJECT) ! -name "test_*.cpp" -name "*.cpp")
# CU_SRCS are the cuda source files
CU_SRCS := $(shell find src/$(PROJECT) ! -name "test_*.cu" -name "*.cu")
# TEST_SRCS are the test source files
TEST_MAIN_SRC := src/$(PROJECT)/test/test_caffe_main.cpp
TEST_SRCS := $(shell find src/$(PROJECT) -name "test_*.cpp")
TEST_SRCS := $(filter-out $(TEST_MAIN_SRC), $(TEST_SRCS))
TEST_CU_SRCS := $(shell find src/$(PROJECT) -name "test_*.cu")
GTEST_SRC := src/gtest/gtest-all.cpp
# TOOL_SRCS are the source files for the tool binaries
TOOL_SRCS := $(shell find tools -name "*.cpp")
# EXAMPLE_SRCS are the source files for the example binaries
EXAMPLE_SRCS := $(shell find examples -name "*.cpp")
# BUILD_INCLUDE_DIR contains any generated header files we want to include.
BUILD_INCLUDE_DIR := $(BUILD_DIR)/src
# PROTO_SRCS are the protocol buffer definitions
PROTO_SRC_DIR := src/$(PROJECT)/proto
PROTO_SRCS := $(wildcard $(PROTO_SRC_DIR)/*.proto)
# PROTO_BUILD_DIR will contain the .cc and obj files generated from
# PROTO_SRCS; PROTO_BUILD_INCLUDE_DIR will contain the .h header files
PROTO_BUILD_DIR := $(BUILD_DIR)/$(PROTO_SRC_DIR)
PROTO_BUILD_INCLUDE_DIR := $(BUILD_INCLUDE_DIR)/$(PROJECT)/proto
# NONGEN_CXX_SRCS includes all source/header files except those generated
# automatically (e.g., by proto).
NONGEN_CXX_SRCS := $(shell find \
	src/$(PROJECT) \
	include/$(PROJECT) \
	python/$(PROJECT) \
	matlab/+$(PROJECT)/private \
	examples \
	tools \
	-name "*.cpp" -or -name "*.hpp" -or -name "*.cu" -or -name "*.cuh")
LINT_SCRIPT := scripts/cpp_lint.py
LINT_OUTPUT_DIR := $(BUILD_DIR)/.lint
LINT_EXT := lint.txt
LINT_OUTPUTS := $(addsuffix .$(LINT_EXT), $(addprefix $(LINT_OUTPUT_DIR)/, $(NONGEN_CXX_SRCS)))
EMPTY_LINT_REPORT := $(BUILD_DIR)/.$(LINT_EXT)
NONEMPTY_LINT_REPORT := $(BUILD_DIR)/$(LINT_EXT)
# PY$(PROJECT)_SRC is the python wrapper for $(PROJECT)
PY$(PROJECT)_SRC := python/$(PROJECT)/_$(PROJECT).cpp
PY$(PROJECT)_SO := python/$(PROJECT)/_$(PROJECT).so
PY$(PROJECT)_HXX := include/$(PROJECT)/layers/python_layer.hpp
# MAT$(PROJECT)_SRC is the mex entrance point of matlab package for $(PROJECT)
MAT$(PROJECT)_SRC := matlab/+$(PROJECT)/private/$(PROJECT)_.cpp
ifneq ($(MATLAB_DIR),)
	MAT_SO_EXT := $(shell $(MATLAB_DIR)/bin/mexext)
endif
MAT$(PROJECT)_SO := matlab/+$(PROJECT)/private/$(PROJECT)_.$(MAT_SO_EXT)

##############################
# Derive generated files
##############################
# The generated files for protocol buffers
PROTO_GEN_HEADER_SRCS := $(addprefix $(PROTO_BUILD_DIR)/, \
		$(notdir ${PROTO_SRCS:.proto=.pb.h}))
PROTO_GEN_HEADER := $(addprefix $(PROTO_BUILD_INCLUDE_DIR)/, \
		$(notdir ${PROTO_SRCS:.proto=.pb.h}))
PROTO_GEN_CC := $(addprefix $(BUILD_DIR)/, ${PROTO_SRCS:.proto=.pb.cc})
PY_PROTO_BUILD_DIR := python/$(PROJECT)/proto
PY_PROTO_INIT := python/$(PROJECT)/proto/__init__.py
PROTO_GEN_PY := $(foreach file,${PROTO_SRCS:.proto=_pb2.py}, \
		$(PY_PROTO_BUILD_DIR)/$(notdir $(file)))
# The objects corresponding to the source files
# These objects will be linked into the final shared library, so we
# exclude the tool, example, and test objects.
CXX_OBJS := $(addprefix $(BUILD_DIR)/, ${CXX_SRCS:.cpp=.o})
CU_OBJS := $(addprefix $(BUILD_DIR)/cuda/, ${CU_SRCS:.cu=.o})
PROTO_OBJS := ${PROTO_GEN_CC:.cc=.o}
OBJS := $(PROTO_OBJS) $(CXX_OBJS) $(CU_OBJS)
# tool, example, and test objects
TOOL_OBJS := $(addprefix $(BUILD_DIR)/, ${TOOL_SRCS:.cpp=.o})
TOOL_BUILD_DIR := $(BUILD_DIR)/tools
TEST_CXX_BUILD_DIR := $(BUILD_DIR)/src/$(PROJECT)/test
TEST_CU_BUILD_DIR := $(BUILD_DIR)/cuda/src/$(PROJECT)/test
TEST_CXX_OBJS := $(addprefix $(BUILD_DIR)/, ${TEST_SRCS:.cpp=.o})
TEST_CU_OBJS := $(addprefix $(BUILD_DIR)/cuda/, ${TEST_CU_SRCS:.cu=.o})
TEST_OBJS := $(TEST_CXX_OBJS) $(TEST_CU_OBJS)
GTEST_OBJ := $(addprefix $(BUILD_DIR)/, ${GTEST_SRC:.cpp=.o})
EXAMPLE_OBJS := $(addprefix $(BUILD_DIR)/, ${EXAMPLE_SRCS:.cpp=.o})
# Output files for automatic dependency generation
DEPS := ${CXX_OBJS:.o=.d} ${CU_OBJS:.o=.d} ${TEST_CXX_OBJS:.o=.d} \
	${TEST_CU_OBJS:.o=.d} $(BUILD_DIR)/${MAT$(PROJECT)_SO:.$(MAT_SO_EXT)=.d}
# tool, example, and test bins
TOOL_BINS := ${TOOL_OBJS:.o=.bin}
EXAMPLE_BINS := ${EXAMPLE_OBJS:.o=.bin}
# symlinks to tool bins without the ".bin" extension
TOOL_BIN_LINKS := ${TOOL_BINS:.bin=}
# Put the test binaries in build/test for convenience.
TEST_BIN_DIR := $(BUILD_DIR)/test
TEST_CU_BINS := $(addsuffix .testbin,$(addprefix $(TEST_BIN_DIR)/, \
		$(foreach obj,$(TEST_CU_OBJS),$(basename $(notdir $(obj))))))
TEST_CXX_BINS := $(addsuffix .testbin,$(addprefix $(TEST_BIN_DIR)/, \
		$(foreach obj,$(TEST_CXX_OBJS),$(basename $(notdir $(obj))))))
TEST_BINS := $(TEST_CXX_BINS) $(TEST_CU_BINS)
# TEST_ALL_BIN is the test binary that links caffe dynamically.
TEST_ALL_BIN := $(TEST_BIN_DIR)/test_all.testbin

##############################
# Derive compiler warning dump locations
##############################
WARNS_EXT := warnings.txt
CXX_WARNS := $(addprefix $(BUILD_DIR)/, ${CXX_SRCS:.cpp=.o.$(WARNS_EXT)})
CU_WARNS := $(addprefix $(BUILD_DIR)/cuda/, ${CU_SRCS:.cu=.o.$(WARNS_EXT)})
TOOL_WARNS := $(addprefix $(BUILD_DIR)/, ${TOOL_SRCS:.cpp=.o.$(WARNS_EXT)})
EXAMPLE_WARNS := $(addprefix $(BUILD_DIR)/, ${EXAMPLE_SRCS:.cpp=.o.$(WARNS_EXT)})
TEST_WARNS := $(addprefix $(BUILD_DIR)/, ${TEST_SRCS:.cpp=.o.$(WARNS_EXT)})
TEST_CU_WARNS := $(addprefix $(BUILD_DIR)/cuda/, ${TEST_CU_SRCS:.cu=.o.$(WARNS_EXT)})
ALL_CXX_WARNS := $(CXX_WARNS) $(TOOL_WARNS) $(EXAMPLE_WARNS) $(TEST_WARNS)
ALL_CU_WARNS := $(CU_WARNS) $(TEST_CU_WARNS)
ALL_WARNS := $(ALL_CXX_WARNS) $(ALL_CU_WARNS)

EMPTY_WARN_REPORT := $(BUILD_DIR)/.$(WARNS_EXT)
NONEMPTY_WARN_REPORT := $(BUILD_DIR)/$(WARNS_EXT)

##############################
# Derive include and lib directories
##############################
CUDA_INCLUDE_DIR := $(CUDA_DIR)/include

CUDA_LIB_DIR :=
# add /lib64 only if it exists
ifneq ("$(wildcard $(CUDA_DIR)/lib64)","")
	CUDA_LIB_DIR += $(CUDA_DIR)/lib64
endif
CUDA_LIB_DIR += $(CUDA_DIR)/lib

INCLUDE_DIRS += $(BUILD_INCLUDE_DIR) ./src ./include
ifneq ($(CPU_ONLY), 1)
	INCLUDE_DIRS += $(CUDA_INCLUDE_DIR)
	LIBRARY_DIRS += $(CUDA_LIB_DIR)
	LIBRARIES := cudart cublas curand
endif

LIBRARIES += glog gflags protobuf boost_system boost_filesystem boost_regex m hdf5_serial_hl hdf5_serial

# handle IO dependencies
USE_LEVELDB ?= 1
USE_LMDB ?= 1
USE_OPENCV ?= 1

ifeq ($(USE_LEVELDB), 1)
	LIBRARIES += leveldb snappy
endif
ifeq ($(USE_LMDB), 1)
	LIBRARIES += lmdb
endif
ifeq ($(USE_OPENCV), 1)
	LIBRARIES += opencv_core opencv_highgui opencv_imgproc

	ifeq ($(OPENCV_VERSION), 3)
		LIBRARIES += opencv_imgcodecs opencv_videoio
	endif

endif
PYTHON_LIBRARIES ?= boost_python python2.7
WARNINGS := -Wall -Wno-sign-compare

##############################
# Set build directories
##############################

DISTRIBUTE_DIR ?= distribute
DISTRIBUTE_SUBDIRS := $(DISTRIBUTE_DIR)/bin $(DISTRIBUTE_DIR)/lib
DIST_ALIASES := dist
ifneq ($(strip $(DISTRIBUTE_DIR)),distribute)
		DIST_ALIASES += distribute
endif

ALL_BUILD_DIRS := $(sort $(BUILD_DIR) $(addprefix $(BUILD_DIR)/, $(SRC_DIRS)) \
	$(addprefix $(BUILD_DIR)/cuda/, $(SRC_DIRS)) \
	$(LIB_BUILD_DIR) $(TEST_BIN_DIR) $(PY_PROTO_BUILD_DIR) $(LINT_OUTPUT_DIR) \
	$(DISTRIBUTE_SUBDIRS) $(PROTO_BUILD_INCLUDE_DIR))

##############################
# Set directory for Doxygen-generated documentation
##############################
DOXYGEN_CONFIG_FILE ?= ./.Doxyfile
# should be the same as OUTPUT_DIRECTORY in the .Doxyfile
DOXYGEN_OUTPUT_DIR ?= ./doxygen
DOXYGEN_COMMAND ?= doxygen
# All the files that might have Doxygen documentation.
DOXYGEN_SOURCES := $(shell find \
	src/$(PROJECT) \
	include/$(PROJECT) \
	python/ \
	matlab/ \
	examples \
	tools \
	-name "*.cpp" -or -name "*.hpp" -or -name "*.cu" -or -name "*.cuh" -or \
        -name "*.py" -or -name "*.m")
DOXYGEN_SOURCES += $(DOXYGEN_CONFIG_FILE)


##############################
# Configure build
##############################

# Determine platform
UNAME := $(shell uname -s)
ifeq ($(UNAME), Linux)
	LINUX := 1
else ifeq ($(UNAME), Darwin)
	OSX := 1
	OSX_MAJOR_VERSION := $(shell sw_vers -productVersion | cut -f 1 -d .)
	OSX_MINOR_VERSION := $(shell sw_vers -productVersion | cut -f 2 -d .)
endif

# Linux
ifeq ($(LINUX), 1)
	CXX ?= /usr/bin/g++
	GCCVERSION := $(shell $(CXX) -dumpversion | cut -f1,2 -d.)
	# older versions of gcc are too dumb to build boost with -Wuninitalized
	ifeq ($(shell echo | awk '{exit $(GCCVERSION) < 4.6;}'), 1)
		WARNINGS += -Wno-uninitialized
	endif
	# boost::thread is reasonably called boost_thread (compare OS X)
	# We will also explicitly add stdc++ to the link target.
	LIBRARIES += boost_thread stdc++ boost_regex
	VERSIONFLAGS += -Wl,-soname,$(DYNAMIC_VERSIONED_NAME_SHORT) -Wl,-rpath,$(ORIGIN)/../lib
endif

# OS X:
# clang++ instead of g++
# libstdc++ for NVCC compatibility on OS X >= 10.9 with CUDA < 7.0
ifeq ($(OSX), 1)
	CXX := /usr/bin/clang++
	ifneq ($(CPU_ONLY), 1)
		CUDA_VERSION := $(shell $(CUDA_DIR)/bin/nvcc -V | grep -o 'release [0-9.]*' | tr -d '[a-z ]')
		ifeq ($(shell echo | awk '{exit $(CUDA_VERSION) < 7.0;}'), 1)
			CXXFLAGS += -stdlib=libstdc++
			LINKFLAGS += -stdlib=libstdc++
		endif
		# clang throws this warning for cuda headers
		WARNINGS += -Wno-unneeded-internal-declaration
		# 10.11 strips DYLD_* env vars so link CUDA (rpath is available on 10.5+)
		OSX_10_OR_LATER   := $(shell [ $(OSX_MAJOR_VERSION) -ge 10 ] && echo true)
		OSX_10_5_OR_LATER := $(shell [ $(OSX_MINOR_VERSION) -ge 5 ] && echo true)
		ifeq ($(OSX_10_OR_LATER),true)
			ifeq ($(OSX_10_5_OR_LATER),true)
				LDFLAGS += -Wl,-rpath,$(CUDA_LIB_DIR)
			endif
		endif
	endif
	# gtest needs to use its own tuple to not conflict with clang
	COMMON_FLAGS += -DGTEST_USE_OWN_TR1_TUPLE=1
	# boost::thread is called boost_thread-mt to mark multithreading on OS X
	LIBRARIES += boost_thread-mt
	# we need to explicitly ask for the rpath to be obeyed
	ORIGIN := @loader_path
	VERSIONFLAGS += -Wl,-install_name,@rpath/$(DYNAMIC_VERSIONED_NAME_SHORT) -Wl,-rpath,$(ORIGIN)/../../build/lib
else
	ORIGIN := \$$ORIGIN
endif

# Custom compiler
ifdef CUSTOM_CXX
	CXX := $(CUSTOM_CXX)
endif

# Static linking
ifneq (,$(findstring clang++,$(CXX)))
	STATIC_LINK_COMMAND := -Wl,-force_load $(STATIC_NAME)
else ifneq (,$(findstring g++,$(CXX)))
	STATIC_LINK_COMMAND := -Wl,--whole-archive $(STATIC_NAME) -Wl,--no-whole-archive
else
  # The following line must not be indented with a tab, since we are not inside a target
  $(error Cannot static link with the $(CXX) compiler)
endif

# Debugging
ifeq ($(DEBUG), 1)
	COMMON_FLAGS += -DDEBUG -g -O0
	NVCCFLAGS += -G
else
	COMMON_FLAGS += -DNDEBUG -O2
endif

# cuDNN acceleration configuration.
ifeq ($(USE_CUDNN), 1)
	LIBRARIES += cudnn
	COMMON_FLAGS += -DUSE_CUDNN
endif

# configure IO libraries
ifeq ($(USE_OPENCV), 1)
	COMMON_FLAGS += -DUSE_OPENCV
endif
ifeq ($(USE_LEVELDB), 1)
	COMMON_FLAGS += -DUSE_LEVELDB
endif
ifeq ($(USE_LMDB), 1)
	COMMON_FLAGS += -DUSE_LMDB
ifeq ($(ALLOW_LMDB_NOLOCK), 1)
	COMMON_FLAGS += -DALLOW_LMDB_NOLOCK
endif
endif

# CPU-only configuration
ifeq ($(CPU_ONLY), 1)
	OBJS := $(PROTO_OBJS) $(CXX_OBJS)
	TEST_OBJS := $(TEST_CXX_OBJS)
	TEST_BINS := $(TEST_CXX_BINS)
	ALL_WARNS := $(ALL_CXX_WARNS)
	TEST_FILTER := --gtest_filter="-*GPU*"
	COMMON_FLAGS += -DCPU_ONLY
endif

# Python layer support
ifeq ($(WITH_PYTHON_LAYER), 1)
	COMMON_FLAGS += -DWITH_PYTHON_LAYER
	LIBRARIES += $(PYTHON_LIBRARIES)
endif

# BLAS configuration (default = ATLAS)
BLAS ?= atlas
ifeq ($(BLAS), mkl)
	# MKL
	LIBRARIES += mkl_rt
	COMMON_FLAGS += -DUSE_MKL
	MKLROOT ?= /opt/intel/mkl
	BLAS_INCLUDE ?= $(MKLROOT)/include
	BLAS_LIB ?= $(MKLROOT)/lib $(MKLROOT)/lib/intel64
else ifeq ($(BLAS), open)
	# OpenBLAS
	LIBRARIES += openblas
else
	# ATLAS
	ifeq ($(LINUX), 1)
		ifeq ($(BLAS), atlas)
			# Linux simply has cblas and atlas
			LIBRARIES += cblas atlas
		endif
	else ifeq ($(OSX), 1)
		# OS X packages atlas as the vecLib framework
		LIBRARIES += cblas
		# 10.10 has accelerate while 10.9 has veclib
		XCODE_CLT_VER := $(shell pkgutil --pkg-info=com.apple.pkg.CLTools_Executables | grep 'version' | sed 's/[^0-9]*\([0-9]\).*/\1/')
		XCODE_CLT_GEQ_7 := $(shell [ $(XCODE_CLT_VER) -gt 6 ] && echo 1)
		XCODE_CLT_GEQ_6 := $(shell [ $(XCODE_CLT_VER) -gt 5 ] && echo 1)
		ifeq ($(XCODE_CLT_GEQ_7), 1)
			BLAS_INCLUDE ?= /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/$(shell ls /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/ | sort | tail -1)/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/Headers
		else ifeq ($(XCODE_CLT_GEQ_6), 1)
			BLAS_INCLUDE ?= /System/Library/Frameworks/Accelerate.framework/Versions/Current/Frameworks/vecLib.framework/Headers/
			LDFLAGS += -framework Accelerate
		else
			BLAS_INCLUDE ?= /System/Library/Frameworks/vecLib.framework/Versions/Current/Headers/
			LDFLAGS += -framework vecLib
		endif
	endif
endif
INCLUDE_DIRS += $(BLAS_INCLUDE)
LIBRARY_DIRS += $(BLAS_LIB)

LIBRARY_DIRS += $(LIB_BUILD_DIR)

# Automatic dependency generation (nvcc is handled separately)
CXXFLAGS += -MMD -MP

# Complete build flags.
COMMON_FLAGS += $(foreach includedir,$(INCLUDE_DIRS),-isystem $(includedir))
CXXFLAGS += -pthread -fPIC $(COMMON_FLAGS) $(WARNINGS)
# NVCCFLAGS += -ccbin=$(CXX) -Xcompiler -fPIC $(COMMON_FLAGS)
NVCCFLAGS += -D_FORCE_INLINES -ccbin=$(CXX) -Xcompiler -fPIC $(COMMON_FLAGS)
# mex may invoke an older gcc that is too liberal with -Wuninitalized
MATLAB_CXXFLAGS := $(CXXFLAGS) -Wno-uninitialized
LINKFLAGS += -pthread -fPIC $(COMMON_FLAGS) $(WARNINGS)

USE_PKG_CONFIG ?= 0
ifeq ($(USE_PKG_CONFIG), 1)
	PKG_CONFIG := $(shell pkg-config opencv --libs)
else
	PKG_CONFIG :=
endif
LDFLAGS += $(foreach librarydir,$(LIBRARY_DIRS),-L$(librarydir)) $(PKG_CONFIG) \
		$(foreach library,$(LIBRARIES),-l$(library))
PYTHON_LDFLAGS := $(LDFLAGS) $(foreach library,$(PYTHON_LIBRARIES),-l$(library))

# 'superclean' target recursively* deletes all files ending with an extension
# in $(SUPERCLEAN_EXTS) below.  This may be useful if you've built older
# versions of Caffe that do not place all generated files in a location known
# to the 'clean' target.
#
# 'supercleanlist' will list the files to be deleted by make superclean.
#
# * Recursive with the exception that symbolic links are never followed, per the
# default behavior of 'find'.
SUPERCLEAN_EXTS := .so .a .o .bin .testbin .pb.cc .pb.h _pb2.py .cuo

# Set the sub-targets of the 'everything' target.
EVERYTHING_TARGETS := all py$(PROJECT) test warn lint
# Only build matcaffe as part of "everything" if MATLAB_DIR is specified.
ifneq ($(MATLAB_DIR),)
	EVERYTHING_TARGETS += mat$(PROJECT)
endif

##############################
# Define build targets
##############################
.PHONY: all lib test clean docs linecount lint lintclean tools examples $(DIST_ALIASES) \
	py mat py$(PROJECT) mat$(PROJECT) proto runtest \
	superclean supercleanlist supercleanfiles warn everything

all: lib tools examples

lib: $(STATIC_NAME) $(DYNAMIC_NAME)

everything: $(EVERYTHING_TARGETS)

linecount:
	cloc --read-lang-def=$(PROJECT).cloc \
		src/$(PROJECT) include/$(PROJECT) tools examples \
		python matlab

lint: $(EMPTY_LINT_REPORT)

lintclean:
	@ $(RM) -r $(LINT_OUTPUT_DIR) $(EMPTY_LINT_REPORT) $(NONEMPTY_LINT_REPORT)

docs: $(DOXYGEN_OUTPUT_DIR)
	@ cd ./docs ; ln -sfn ../$(DOXYGEN_OUTPUT_DIR)/html doxygen

$(DOXYGEN_OUTPUT_DIR): $(DOXYGEN_CONFIG_FILE) $(DOXYGEN_SOURCES)
	$(DOXYGEN_COMMAND) $(DOXYGEN_CONFIG_FILE)

$(EMPTY_LINT_REPORT): $(LINT_OUTPUTS) | $(BUILD_DIR)
	@ cat $(LINT_OUTPUTS) > $@
	@ if [ -s "$@" ]; then \
		cat $@; \
		mv $@ $(NONEMPTY_LINT_REPORT); \
		echo "Found one or more lint errors."; \
		exit 1; \
	  fi; \
	  $(RM) $(NONEMPTY_LINT_REPORT); \
	  echo "No lint errors!";

$(LINT_OUTPUTS): $(LINT_OUTPUT_DIR)/%.lint.txt : % $(LINT_SCRIPT) | $(LINT_OUTPUT_DIR)
	@ mkdir -p $(dir $@)
	@ python $(LINT_SCRIPT) $< 2>&1 \
		| grep -v "^Done processing " \
		| grep -v "^Total errors found: 0" \
		> $@ \
		|| true

test: $(TEST_ALL_BIN) $(TEST_ALL_DYNLINK_BIN) $(TEST_BINS)

tools: $(TOOL_BINS) $(TOOL_BIN_LINKS)

examples: $(EXAMPLE_BINS)

py$(PROJECT): py

py: $(PY$(PROJECT)_SO) $(PROTO_GEN_PY)

$(PY$(PROJECT)_SO): $(PY$(PROJECT)_SRC) $(PY$(PROJECT)_HXX) | $(DYNAMIC_NAME)
	@ echo CXX/LD -o $@ $<
	$(Q)$(CXX) -shared -o $@ $(PY$(PROJECT)_SRC) \
		-o $@ $(LINKFLAGS) -l$(LIBRARY_NAME) $(PYTHON_LDFLAGS) \
		-Wl,-rpath,$(ORIGIN)/../../build/lib

mat$(PROJECT): mat

mat: $(MAT$(PROJECT)_SO)

$(MAT$(PROJECT)_SO): $(MAT$(PROJECT)_SRC) $(STATIC_NAME)
	@ if [ -z "$(MATLAB_DIR)" ]; then \
		echo "MATLAB_DIR must be specified in $(CONFIG_FILE)" \
			"to build mat$(PROJECT)."; \
		exit 1; \
	fi
	@ echo MEX $<
	$(Q)$(MATLAB_DIR)/bin/mex $(MAT$(PROJECT)_SRC) \
			CXX="$(CXX)" \
			CXXFLAGS="\$$CXXFLAGS $(MATLAB_CXXFLAGS)" \
			CXXLIBS="\$$CXXLIBS $(STATIC_LINK_COMMAND) $(LDFLAGS)" -output $@
	@ if [ -f "$(PROJECT)_.d" ]; then \
		mv -f $(PROJECT)_.d $(BUILD_DIR)/${MAT$(PROJECT)_SO:.$(MAT_SO_EXT)=.d}; \
	fi

runtest: $(TEST_ALL_BIN)
	$(TOOL_BUILD_DIR)/caffe
	$(TEST_ALL_BIN) $(TEST_GPUID) --gtest_shuffle $(TEST_FILTER)

pytest: py
	cd python; python -m unittest discover -s caffe/test

mattest: mat
	cd matlab; $(MATLAB_DIR)/bin/matlab -nodisplay -r 'caffe.run_tests(), exit()'

warn: $(EMPTY_WARN_REPORT)

$(EMPTY_WARN_REPORT): $(ALL_WARNS) | $(BUILD_DIR)
	@ cat $(ALL_WARNS) > $@
	@ if [ -s "$@" ]; then \
		cat $@; \
		mv $@ $(NONEMPTY_WARN_REPORT); \
		echo "Compiler produced one or more warnings."; \
		exit 1; \
	  fi; \
	  $(RM) $(NONEMPTY_WARN_REPORT); \
	  echo "No compiler warnings!";

$(ALL_WARNS): %.o.$(WARNS_EXT) : %.o

$(BUILD_DIR_LINK): $(BUILD_DIR)/.linked

# Create a target ".linked" in this BUILD_DIR to tell Make that the "build" link
# is currently correct, then delete the one in the OTHER_BUILD_DIR in case it
# exists and $(DEBUG) is toggled later.
$(BUILD_DIR)/.linked:
	@ mkdir -p $(BUILD_DIR)
	@ $(RM) $(OTHER_BUILD_DIR)/.linked
	@ $(RM) -r $(BUILD_DIR_LINK)
	@ ln -s $(BUILD_DIR) $(BUILD_DIR_LINK)
	@ touch $@

$(ALL_BUILD_DIRS): | $(BUILD_DIR_LINK)
	@ mkdir -p $@

$(DYNAMIC_NAME): $(OBJS) | $(LIB_BUILD_DIR)
	@ echo LD -o $@
	$(Q)$(CXX) -shared -o $@ $(OBJS) $(VERSIONFLAGS) $(LINKFLAGS) $(LDFLAGS)
	@ cd $(BUILD_DIR)/lib; rm -f $(DYNAMIC_NAME_SHORT);   ln -s $(DYNAMIC_VERSIONED_NAME_SHORT) $(DYNAMIC_NAME_SHORT)

$(STATIC_NAME): $(OBJS) | $(LIB_BUILD_DIR)
	@ echo AR -o $@
	$(Q)ar rcs $@ $(OBJS)

$(BUILD_DIR)/%.o: %.cpp | $(ALL_BUILD_DIRS)
	@ echo CXX $<
	$(Q)$(CXX) $< $(CXXFLAGS) -c -o $@ 2> $@.$(WARNS_EXT) \
		|| (cat $@.$(WARNS_EXT); exit 1)
	@ cat $@.$(WARNS_EXT)

$(PROTO_BUILD_DIR)/%.pb.o: $(PROTO_BUILD_DIR)/%.pb.cc $(PROTO_GEN_HEADER) \
		| $(PROTO_BUILD_DIR)
	@ echo CXX $<
	$(Q)$(CXX) $< $(CXXFLAGS) -c -o $@ 2> $@.$(WARNS_EXT) \
		|| (cat $@.$(WARNS_EXT); exit 1)
	@ cat $@.$(WARNS_EXT)

$(BUILD_DIR)/cuda/%.o: %.cu | $(ALL_BUILD_DIRS)
	@ echo NVCC $<
	$(Q)$(CUDA_DIR)/bin/nvcc $(NVCCFLAGS) $(CUDA_ARCH) -M $< -o ${@:.o=.d} \
		-odir $(@D)
	$(Q)$(CUDA_DIR)/bin/nvcc $(NVCCFLAGS) $(CUDA_ARCH) -c $< -o $@ 2> $@.$(WARNS_EXT) \
		|| (cat $@.$(WARNS_EXT); exit 1)
	@ cat $@.$(WARNS_EXT)

$(TEST_ALL_BIN): $(TEST_MAIN_SRC) $(TEST_OBJS) $(GTEST_OBJ) \
		| $(DYNAMIC_NAME) $(TEST_BIN_DIR)
	@ echo CXX/LD -o $@ $<
	$(Q)$(CXX) $(TEST_MAIN_SRC) $(TEST_OBJS) $(GTEST_OBJ) \
		-o $@ $(LINKFLAGS) $(LDFLAGS) -l$(LIBRARY_NAME) -Wl,-rpath,$(ORIGIN)/../lib

$(TEST_CU_BINS): $(TEST_BIN_DIR)/%.testbin: $(TEST_CU_BUILD_DIR)/%.o \
	$(GTEST_OBJ) | $(DYNAMIC_NAME) $(TEST_BIN_DIR)
	@ echo LD $<
	$(Q)$(CXX) $(TEST_MAIN_SRC) $< $(GTEST_OBJ) \
		-o $@ $(LINKFLAGS) $(LDFLAGS) -l$(LIBRARY_NAME) -Wl,-rpath,$(ORIGIN)/../lib

$(TEST_CXX_BINS): $(TEST_BIN_DIR)/%.testbin: $(TEST_CXX_BUILD_DIR)/%.o \
	$(GTEST_OBJ) | $(DYNAMIC_NAME) $(TEST_BIN_DIR)
	@ echo LD $<
	$(Q)$(CXX) $(TEST_MAIN_SRC) $< $(GTEST_OBJ) \
		-o $@ $(LINKFLAGS) $(LDFLAGS) -l$(LIBRARY_NAME) -Wl,-rpath,$(ORIGIN)/../lib

# Target for extension-less symlinks to tool binaries with extension '*.bin'.
$(TOOL_BUILD_DIR)/%: $(TOOL_BUILD_DIR)/%.bin | $(TOOL_BUILD_DIR)
	@ $(RM) $@
	@ ln -s $(notdir $<) $@

$(TOOL_BINS): %.bin : %.o | $(DYNAMIC_NAME)
	@ echo CXX/LD -o $@
	$(Q)$(CXX) $< -o $@ $(LINKFLAGS) -l$(LIBRARY_NAME) $(LDFLAGS) \
		-Wl,-rpath,$(ORIGIN)/../lib

$(EXAMPLE_BINS): %.bin : %.o | $(DYNAMIC_NAME)
	@ echo CXX/LD -o $@
	$(Q)$(CXX) $< -o $@ $(LINKFLAGS) -l$(LIBRARY_NAME) $(LDFLAGS) \
		-Wl,-rpath,$(ORIGIN)/../../lib

proto: $(PROTO_GEN_CC) $(PROTO_GEN_HEADER)

$(PROTO_BUILD_DIR)/%.pb.cc $(PROTO_BUILD_DIR)/%.pb.h : \
		$(PROTO_SRC_DIR)/%.proto | $(PROTO_BUILD_DIR)
	@ echo PROTOC $<
	$(Q)protoc --proto_path=$(PROTO_SRC_DIR) --cpp_out=$(PROTO_BUILD_DIR) $<

$(PY_PROTO_BUILD_DIR)/%_pb2.py : $(PROTO_SRC_DIR)/%.proto \
		$(PY_PROTO_INIT) | $(PY_PROTO_BUILD_DIR)
	@ echo PROTOC \(python\) $<
	$(Q)protoc --proto_path=$(PROTO_SRC_DIR) --python_out=$(PY_PROTO_BUILD_DIR) $<

$(PY_PROTO_INIT): | $(PY_PROTO_BUILD_DIR)
	touch $(PY_PROTO_INIT)

clean:
	@- $(RM) -rf $(ALL_BUILD_DIRS)
	@- $(RM) -rf $(OTHER_BUILD_DIR)
	@- $(RM) -rf $(BUILD_DIR_LINK)
	@- $(RM) -rf $(DISTRIBUTE_DIR)
	@- $(RM) $(PY$(PROJECT)_SO)
	@- $(RM) $(MAT$(PROJECT)_SO)

supercleanfiles:
	$(eval SUPERCLEAN_FILES := $(strip \
			$(foreach ext,$(SUPERCLEAN_EXTS), $(shell find . -name '*$(ext)' \
			-not -path './data/*'))))

supercleanlist: supercleanfiles
	@ \
	if [ -z "$(SUPERCLEAN_FILES)" ]; then \
		echo "No generated files found."; \
	else \
		echo $(SUPERCLEAN_FILES) | tr ' ' '\n'; \
	fi

superclean: clean supercleanfiles
	@ \
	if [ -z "$(SUPERCLEAN_FILES)" ]; then \
		echo "No generated files found."; \
	else \
		echo "Deleting the following generated files:"; \
		echo $(SUPERCLEAN_FILES) | tr ' ' '\n'; \
		$(RM) $(SUPERCLEAN_FILES); \
	fi

$(DIST_ALIASES): $(DISTRIBUTE_DIR)

$(DISTRIBUTE_DIR): all py | $(DISTRIBUTE_SUBDIRS)
	# add proto
	cp -r src/caffe/proto $(DISTRIBUTE_DIR)/
	# add include
	cp -r include $(DISTRIBUTE_DIR)/
	mkdir -p $(DISTRIBUTE_DIR)/include/caffe/proto
	cp $(PROTO_GEN_HEADER_SRCS) $(DISTRIBUTE_DIR)/include/caffe/proto
	# add tool and example binaries
	cp $(TOOL_BINS) $(DISTRIBUTE_DIR)/bin
	cp $(EXAMPLE_BINS) $(DISTRIBUTE_DIR)/bin
	# add libraries
	cp $(STATIC_NAME) $(DISTRIBUTE_DIR)/lib
	install -m 644 $(DYNAMIC_NAME) $(DISTRIBUTE_DIR)/lib
	cd $(DISTRIBUTE_DIR)/lib; rm -f $(DYNAMIC_NAME_SHORT);   ln -s $(DYNAMIC_VERSIONED_NAME_SHORT) $(DYNAMIC_NAME_SHORT)
	# add python - it's not the standard way, indeed...
	cp -r python $(DISTRIBUTE_DIR)/python

-include $(DEPS)

具体的修改为：

LIBRARIES += glog gflags protobuf boost_system boost_filesystem m hdf5_hl hdf5 改成了
LIBRARIES += glog gflags protobuf boost_system boost_filesystem m hdf5_serial_hl hdf5_serial
NVCCFLAGS +=-ccbin=$(CXX) -Xcompiler-fPIC $(COMMON_FLAGS) 改成了
NVCCFLAGS += -D_FORCE_INLINES -ccbin=$(CXX) -Xcompiler -fPIC $(COMMON_FLAGS)
LIBRARIES += boost_thread stdc++后加boost_regex 改成了
LIBRARIES += boost_thread stdc++ boost_regex

编译

请确认好在caffe文件夹分支ssd下哦！

make -j8
 
make py
 
make test -j8

# 这个运不运行无所谓 测试一下是否OK
# make runtest -j8

# 用来给autoware的那个搜索到的
make distribute

进入文件 DEFINE CPU_ONLY

gedit ~/caffe/distribute/include/caffe/util/device_alternate.hpp

然后在#ifdef CPU_ONLY前面空行处，加一句：

#define CPU_ONLY

可能会遇到的问题

/usr/bin/ld: cannot find -lopenblas

sudo apt install liblapack-dev liblapack3 libopenblas-base libopenblas-dev

导入模型文件

这个模型 models_VGGNet_VOC0712_SSD_512x512_ft.tar：百度YP链接
然后解压把VGGNet文件夹整个拷贝到caffe的models文件夹内

接着我们，然后拖到最后

gedit ~/caffe/models/VGGNet/VOC0712/SSD_512x512_ft/deploy.prototxt

这里的

save_output_param {
      label_map_file: "/home/udi/caffe/data/VOC0712/labelmap_voc.prototxt"
    }

是需要改成绝对路径的

Autoware 适配

修改CMakeLists.txt

不想看具体的直接复制全选粘贴：【注意版本V1.14可以这么干】

cmake_minimum_required(VERSION 2.8.12)
project(vision_ssd_detect)

include(FindPkgConfig)

find_package(autoware_build_flags REQUIRED)
find_package(catkin REQUIRED COMPONENTS
  autoware_config_msgs
  autoware_msgs
  cv_bridge
  image_transport
  roscpp
  sensor_msgs
  std_msgs
  tf
)

# find_package(CUDA)
find_package(OpenCV REQUIRED)

catkin_package()

set(CMAKE_CXX_FLAGS "-O2 -g -Wall ${CMAKE_CXX_FLAGS}")

include_directories(
  ${catkin_INCLUDE_DIRS}
)


#####SSD########
##############################SSD'sFORK of CAFFE NEEDS TO BE PREVIOUSLY COMPILED####################
# set(SSD_CAFFE_PATH "$ENV{HOME}/ssdcaffe/distribute")
set(SSD_CAFFE_PATH "$ENV{HOME}/caffe/distribute")
####################################################################################################

# AW_CHECK_CUDA()

# if(USE_CUDA AND EXISTS "${SSD_CAFFE_PATH}")
if(EXISTS "${SSD_CAFFE_PATH}")
  include_directories(${CUDA_INCLUDE_DIRS})

  if("${CMAKE_SYSTEM_PROCESSOR}" MATCHES "^arm")
    link_directories(/usr/lib/arm-linux-gnueabihf/tegra)
  endif()
  add_executable(vision_ssd_detect
    src/vision_ssd_detect.cpp
    src/vision_ssd_detect_node.cpp
  )

  target_link_libraries(vision_ssd_detect
    ${catkin_LIBRARIES}
    ${OpenCV_LIBRARIES}
    # ${CUDA_LIBRARIES}
    # ${CUDA_CUBLAS_LIBRARIES}
    # ${CUDA_curand_LIBRARY}
    ${SSD_CAFFE_PATH}/lib/libcaffe.so
    ${SSD_CAFFE_PATH}/lib/libcaffe.so.1.0.0-rc3
    # need to link{1} /home/${USER_NAME}/ssdcaffe/distribute/lib/libcaffe.so.1.0.0-rc3 to shared lib path{2}
    # 1-1: sudo cp 
    # 1-2: ln -s 
    # 2-1: /usr/lib/x86_64-linux-gnu/
    # 2-2: /usr/lib
    glog
  )

  target_include_directories(vision_ssd_detect PRIVATE
    include
    ${SSD_CAFFE_PATH}/include
  )

  add_dependencies(vision_ssd_detect
    ${catkin_EXPORTED_TARGETS}
  )

  install(DIRECTORY include/
    DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION}
  )

  install(TARGETS vision_ssd_detect
    ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
    LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
    RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
  )
  install(DIRECTORY launch/
    DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}/launch
    # PATTERN ".svn" EXCLUDE
  )
else()
  message("'SSD/Caffe' is not installed. 'ssd_unc' will not be built.")
endif()

具体的修改为：

注释# find_package(CUDA)
caffe的文件夹名修改了【因为有些gitee上是ssdcaffe的文件名的话就不需要改这条，如果是按照上面步骤来的改就行】
```
# set(SSD_CAFFE_PATH "$ENV{HOME}/ssdcaffe/distribute")
set(SSD_CAFFE_PATH "$ENV{HOME}/caffe/distribute")
```
注释# AW_CHECK_CUDA()
将if(USE_CUDA AND EXISTS "${SSD_CAFFE_PATH}")改为了：if(EXISTS "${SSD_CAFFE_PATH}")，即删除了CUDA

链接库进行了修改：注释掉了CUDA相关，增加了libcaffe.so.1.0.0-rcc3

  target_link_libraries(vision_ssd_detect
    ${catkin_LIBRARIES}
    ${OpenCV_LIBRARIES}
    # ${CUDA_LIBRARIES}
    # ${CUDA_CUBLAS_LIBRARIES}
    # ${CUDA_curand_LIBRARY}
    ${SSD_CAFFE_PATH}/lib/libcaffe.so
    ${SSD_CAFFE_PATH}/lib/libcaffe.so.1.0.0-rc3
    # need to link{1} /home/${USER_NAME}/ssdcaffe/distribute/lib/libcaffe.so.1.0.0-rc3 to shared lib path{2}
    glog
  )

注释# PATTERN ".svn" EXCLUDE，如不删除此句则不会进行编译

链接库

其实这个点在CMakeList里写了

# need to link{1} /home/${USER_NAME}/ssdcaffe/distribute/lib/libcaffe.so.1.0.0-rc3 to shared lib path{2}
# 1-1: sudo cp 
# 1-2: ln -s 
# 2-1: /usr/lib/x86_64-linux-gnu/
# 2-2: /usr/lib

自己替换USER_NAME

sudo ln -s /home/${USER_NAME}/caffe/distribute/lib/libcaffe.so.1.0.0-rc3 /usr/lib

修改launch 虽然界面也能勾选

gedit ~/autoware.ai/src/autoware/core_perception/vision_ssd_detect/launch/vision_ssd_detect.launch 

#第二行的true改成false
<arg name="use_gpu" default="false"/>

编译Autoware

cd ~/autoware.ai
colcon build

如果是按照上面的流程做的应该不会有报错了

运行

运行runtime_manager

roslaunch runtime_manager runtime_manager.launch

播放BAG

播放一个带image_raw 或者带图片的输出[订阅节点名字可以被修改]输出的bag包

运行vision_ssd_detect节点

其中第二步的选择文件更改到上面说到的模型文件中去，两个都要改，注意看默认的后缀别放错了

然后打开RVIZ添加Panels - ImageViewerPlugin

效果示意

GPU

GPU版本的修改为：

CUDA安装

深度学习最快方式安装CUDA和 Nvidia Driver 按照这篇文章的就OK
自己又按照10.0的写了一遍在CSDN上，直接跳转第一部分即可

caffe里的Makefile.config

等有空再详细讲，直接复制粘贴【CUDA用的10.0】

## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!

# cuDNN acceleration switch (uncomment to build with cuDNN).
# USE_CUDNN := 1

# CPU-only switch (uncomment to build without GPU support).
# CPU_ONLY := 1

# uncomment to disable IO dependencies and corresponding data layers
# USE_OPENCV := 0
# USE_LEVELDB := 0
# USE_LMDB := 0

# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
#	You should not set this flag if you will be reading LMDBs with any
#	possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1

# Uncomment if you're using OpenCV 3
 OPENCV_VERSION := 3

# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
# CUSTOM_CXX := g++

# CUDA directory contains bin/ and lib/ directories that we need.
CUDA_DIR := /usr/local/cuda-10.0
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr

# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the lines after *_35 for compatibility.
CUDA_ARCH := -gencode arch=compute_30,code=sm_30 \
             -gencode arch=compute_35,code=sm_35 \
             -gencode arch=compute_50,code=sm_50 \
             -gencode arch=compute_52,code=sm_52 \
             -gencode arch=compute_61,code=sm_61


# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
# BLAS := atlas
BLAS := open
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
# BLAS_INCLUDE := /path/to/your/blas
# BLAS_LIB := /path/to/your/blas

# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib

# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
# MATLAB_DIR := /usr/local
# MATLAB_DIR := /Applications/MATLAB_R2012b.app

# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
		/usr/lib/python2.7/dist-packages/numpy/core/include
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
# ANACONDA_HOME := $(HOME)/anaconda2
# PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
		$(ANACONDA_HOME)/include/python2.7 \
		$(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include \

# Uncomment to use Python 3 (default is Python 2)
# PYTHON_LIBRARIES := boost_python3 python3.5m
# PYTHON_INCLUDE := /usr/include/python3.5m \
#                 /usr/lib/python3.5/dist-packages/numpy/core/include

# We need to be able to find libpythonX.X.so or .dylib.
PYTHON_LIB := /usr/lib
# PYTHON_LIB := $(ANACONDA_HOME)/lib

# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib

# Uncomment to support layers written in Python (will link against Python libs)
 WITH_PYTHON_LAYER := 1

# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu/hdf5/serial

# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib

# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1

# N.B. both build and distribute dirs are cleared on `make clean`
BUILD_DIR := build
DISTRIBUTE_DIR := distribute

# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1

# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0

# enable pretty build (comment to see full commands)
Q ?= @

关于Eigen的版本

这里有点棘手的就是 libeigen3-dev这个吧… 系统的包版本是3.3.4 而且还没能升级【ubuntu 18.04】也不知道啥时候安好的，然后呢 Autoware这边detect节点编译的时候就会说：
GPU require Eigen vesion >=3.3.7
然后呢这就得卸载吧
然后呢这个一卸载就发现：接连着要给我把整个ROS都卸了
然后呢我就… 用了大家很反感的
```
sudo rm -rf /usr/include/eigen3* 
sudo rm -rf /usr/lib/cmake/eigen3*
```
我感觉是有风险的只是我现在… 还没感觉到这个BUG在哪里
然后呢再把源码编译的usr/local/include/eigen3给链接到这个/usr/include上
然后呢我就发现咦是不是不用删sudo rm -rf直接链接也可以…【事实证明：不可以】

源码安装法

cd && wget https://gitlab.com/libeigen/eigen/-/archive/3.3.7/eigen-3.3.7.tar.gz
mkdir eigen && tar --strip-components=1 -xzvf eigen-3.3.7.tar.gz -C eigen 
cd eigen && mkdir build && cd build && cmake .. && make

# install need administrative privileges
sudo make install

#Remove downloaded and temporary files
cd && rm -rf eigen-3.3.7.tar.gz

接着就是软链接【放心可以撤回的】此条命令详情见：ubuntu文件夹建立软链接方法
2：文件夹建立软链接（用绝对地址）
ln -s 源地址目的地址
比如我把linux文件系统rootfs_dir软链接到/home/jyg/目录下
ln -s /opt/linux/rootfs_dir /home/jyg/rootfs_dir就可以了

sudo ln -s /usr/local/include/eigen3 /usr/include/eigen3

接着编译：

AUTOWARE_COMPILE_WITH_CUDA=1 colcon build --cmake-args -DCMAKE_BUILD_TYPE=Release

编译cafffe

make -j8
 
make py
 
make test -j8

# 这个运不运行无所谓 测试一下是否OK
# make runtest -j8

# 用来给autoware的那个搜索到的
make distribute

报错类型

atal error: caffe/caffe.hpp: No such file or directory #include “caffe/caffe.hpp”

没有进行make distribute的操作

make test -j8的时候报错

错误如下：

Makefile:604: recipe for target '.build_release/test/test_im2col_kernel.testbin' failed
make: *** [.build_release/test/test_im2col_kernel.testbin] Error 1
make: *** Waiting for unfinished jobs....
.build_release/lib/libcaffe.so: undefined reference to `caffe::BaseConvolutionLayer<double>::backward_gpu_bias(double*, double const*)'
.build_release/lib/libcaffe.so: undefined reference to `caffe::BaseConvolutionLayer<float>::backward_gpu_bias(float*, float const*)'
.build_release/lib/libcaffe.so: undefined reference to `caffe::BaseConvolutionLayer::forward_gpu_gemm(double const*, double const*, double*, bool)'

这个错误似乎是没有删除之前的build
重新来一遍就好了…【从git clone caffe分支开始】（以前我记得直接rm -rf build*这个文件夹就OK的…）-> 还是make clean把

cd caffe
make clean

编译Autoware with CUDA

AUTOWARE_COMPILE_WITH_CUDA=1 colcon build --cmake-args -DCMAKE_BUILD_TYPE=Release

1.14版本会有define报错

你可能感兴趣的:(Self-Driving,无人驾驶,Ubuntu,&,ROS,Autoware,ssd_detect)

git常用命令笔记咩酱-小羊 git 笔记
###用习惯了idea总是不记得git的一些常见命令，需要用到的时候总是担心旁边站了人~~~记个笔记@_@，告诉自己看笔记不丢人初始化初始化一个新的Git仓库gitinit配置配置用户信息gitconfig--globaluser.name"YourName"gitconfig--globaluser.email"[email protected]"基本操作克隆远程仓库gitclone查看
PHP环境搭建详细教程好看资源平台前端 php
PHP是一个流行的服务器端脚本语言，广泛用于Web开发。为了使PHP能够在本地或服务器上运行，我们需要搭建一个合适的PHP环境。本教程将结合最新资料，介绍在不同操作系统上搭建PHP开发环境的多种方法，包括Windows、macOS和Linux系统的安装步骤，以及本地和Docker环境的配置。1.PHP环境搭建概述PHP环境的搭建主要分为以下几类：集成开发环境：例如XAMPP、WAMP、MAMP，这
四章-32-点要素的聚合彩云飘过
本文基于腾讯课堂老胡的课《跟我学Openlayers--基础实例详解》做的学习笔记，使用的openlayers5.3.xapi。源码见1032.html，对应的官网示例https://openlayers.org/en/latest/examples/cluster.htmlhttps://openlayers.org/en/latest/examples/earthquake-clusters.
在一台Ubuntu计算机上构建Hyperledger Fabric网络落叶无声9 区块链超级账本 Hyperledger fabric 区块链 ubuntu 构建 hyperledger fabric
在一台Ubuntu计算机上构建HyperledgerFabric网络Hyperledgerfabric是一个开源的区块链应用程序平台，为开发基于区块链的应用程序提供了一个起点。当我们提到HyperledgerFabric网络时，我们指的是使用HyperledgerFabric的正在运行的系统。即使只使用最少数量的组件，部署Fabric网络也不是一件容易的事。Fabric社区创建了一个名为Cello
在Ubuntu中编译含有JSON的文件出现报错芝麻糊76 Linux kill_bug linux ubuntu json
在ubuntu中进行JSON相关学习的时候，我发现了一些小问题，决定与大家进行分享，减少踩坑时候出现不必要的时间耗费截取部分含有JSON部分的代码进行展示char*str="{\"title\":\"JSONExample\",\"author\":{\"name\":\"JohnDoe\",\"age\":35,\"isVerified\":true},\"tags\":[\"json\",\"
ExpRe[25] bash外的其它shell：zsh和fish tritone ExpRe bash linux ubuntu shell
文章目录zsh基础配置实用特性插件`autojump`语法高亮自动补全fish优点缺点时效性本篇撰写时间为2021.12.15，由于计算机技术日新月异，博客中所有内容都有时效和版本限制，具体做法不一定总行得通，链接可能改动失效，各种软件的用法可能有修改。但是其中透露的思想往往是值得学习的。本篇前置：ExpRe[10]Ubuntu[2]准备神秘软件、备份恢复软件https://www.cnblogs
网络编程基础记得开心一点啊网络
目录♫什么是网络编程♫Socket套接字♪什么是Socket套接字♪数据报套接字♪流套接字♫数据报套接字通信模型♪数据报套接字通讯模型♪DatagramSocket♪DatagramPacket♪实现UDP的服务端代码♪实现UDP的客户端代码♫流套接字通信模型♪流套接字通讯模型♪ServerSocket♪Socket♪实现TCP的服务端代码♪实现TCP的客户端代码♫什么是网络编程网络编程，指网络上
matlab mle 优化,MLE+: Matlab Toolbox for Integrated Modeling, Control and Optimization for Buildings... Simon Zhong matlab mle 优化
摘要：FollowingunilateralopticnervesectioninadultPVGhoodedrat,theaxonguidancecueephrin-A2isup-regulatedincaudalbutnotrostralsuperiorcolliculus(SC)andtheEphA5receptorisdown-regulatedinaxotomisedretinalgan
Spring Boot中实现跨域请求 BABA8891 spring boot 后端 java
在SpringBoot中实现跨域请求（CORS，Cross-OriginResourceSharing）可以通过多种方式，以下是几种常见的方法：1.使用@CrossOrigin注解在SpringBoot中，你可以在控制器或者具体的请求处理方法上使用@CrossOrigin注解来允许跨域请求。在控制器上应用：importorg.springframework.web.bind.annotation.
博客网站制作教程 2401_85194651 java maven
首先就是技术框架：后端：Java+SpringBoot数据库：MySQL前端：Vue.js数据库连接：JPA(JavaPersistenceAPI)1.项目结构blog-app/├──backend/│├──src/main/java/com/example/blogapp/││├──BlogApplication.java││├──config/│││└──DatabaseConfig.java
ubuntu安装wordpress lissettecarlr
1安装nginx网上安装方式很多，这就就直接用apt-get了apt-getinstallnginx不用启动啥，然后直接在浏览器里面输入IP:80就能看到nginx的主页了。如果修改了一些配置可以使用下列命令重启一下systemctlrestartnginx.service2安装mysql输入安装前也可以更新一下软件源，在安装过程中将会让你输入数据库的密码。sudoapt-getinstallmy
rose中原焦点团队网络初级27期、中级27期分享第201天20211019 rosewshx
今天出差回来上班，很多事情又都拥挤到了一起，列表排序逐一落实吧。排出来心里就不慌乱了，稳得住事情去逐一解决。调整烦躁慌乱的心态，平稳住按部就班就好，让觉察时时在。
LeetCode 53. Maximum Subarray 枯萎的海风算法与OJ C/C++leetcode
1.题目描述Findthecontiguoussubarraywithinanarray(containingatleastonenumber)whichhasthelargestsum.Forexample,giventhearray[−2,1,−3,4,−1,2,1,−5,4],thecontiguoussubarray[4,−1,2,1]hasthelargestsum=6.clicktos
Ubuntu18.04 Docker部署Kinship(Django)项目过程 Dante617
1Docker的安装https://blog.csdn.net/weixin_41735055/article/details/1003551792下载镜像dockerpullprogramize/python3.6.8-dlib下载的镜像里包含python3.6.8和dlib19.17.03启动镜像dockerrun-it--namekinship-p7777:80-p3307:3306-p55
【LeetCode】53. Maximum Subarray 墨染百城 LeetCode leetcode
问题描述问题链接：https://leetcode.com/problems/maximum-subarray/#/descriptionFindthecontiguoussubarraywithinanarray(containingatleastonenumber)whichhasthelargestsum.Forexample,giventhearray[-2,1,-3,4,-1,2,1,-
LeetCode 673. Number of Longest Increasing Subsequence (Java版; Meidum) littlehaes 字符串动态规划算法 leetcode 数据结构
welcometomyblogLeetCode673.NumberofLongestIncreasingSubsequence(Java版;Meidum)题目描述Givenanunsortedarrayofintegers,findthenumberoflongestincreasingsubsequence.Example1:Input:[1,3,5,4,7]Output:2Explanatio
ubuntu22.04环境中安装pylint 歪歪的酒壶 python linux 开发语言
ubuntu22.04环境中安装pylintsudoapt-getinstallpython3-pipsudoaptitudeinstallpython3-pipsudopipinstallpylintsudoapt-getinstallpython3-pip在安装pylint的时候，需要使用pip命令，在ubuntu22.04环境中命令如下：$sudoapt-getinstallpython3-
使用selenium调用firefox提示Profile Missing的问题解决歪歪的酒壶 selenium 测试工具 python
在Ubuntu22.04环境中，使用python3运行selenium提示ProfileMissing，具体信息为：YourFirefoxprofilecannotbeloaded.Itmaybemissingorinaccessible在这个问题的环境中firefox浏览器工作正常。排查中，手动在命令行执行firefox可以打开浏览器，但是出现如下提示Gtk-Message:15:32:09.9
ubuntu安装opencv最快的方法 Derek重名了
最快方法，当然不能太多文字$sudoapt-getinstallpython-opencv借助python就可以把ubuntu的opencv环境搞起来，非常快非常容易参考：https://docs.opencv.org/trunk/d2/de6/tutorial_py_setup_in_ubuntu.html
【Golang】使用 Golang 语言和 excelize 库将数据写入Excel 不爱洗脚的小滕 golang excel 开发语言
文章目录前言一、Excelize简介二、代码实现1.获取依赖2.示例代码三、总结前言在数据处理和分析中，Excel作为一种常见的电子表格格式，被广泛应用于各种场景。然而，如何在Go语言中有效地处理Excel文件呢？在这篇博客中，我将介绍如何使用Go语言和excelize库将数据写入Excel文件。一、Excelize简介Excelize是一个用于读取和写入MicrosoftExcel™(XLSX)
ArcGIS Pro SDK （十四）地图探索 5 时间与动画 WineMonk ArcGIS Pro SDK arcgis arcgis pro sdk gis c#
ArcGISProSDK（十四）地图探索5时间与动画文章目录ArcGISProSDK（十四）地图探索5时间与动画1时间1.1时间提前1个月1.2禁用地图中的时间。2动画2.1设置动画长度2.2缩放动画2.3相机关键帧2.4插值相机2.5插值时间2.6插值范围2.7创建摄像机关键帧2.8创建时间关键帧2.9创建范围关键帧2.10创建图层关键帧环境：VisualStudio2022+.NET6+Arc
Ubuntu常用命令整理十里染林
ubuntu16.04server开启ssh:使用x-shell连接主机，发现22端口没有打开，开启ssh服务：安装openssh-serversudoapt-getinstallopenssh-server检查安装是否成功sudops-e|grepssh开启ssh服务sudoservicesshstartUbuntu开启/关闭防火墙:开启防火墙sudoufwenable关闭防火墙sudoufwd
如何利用Samba跨平台分享Ubuntu文件夹 GottenZZP 部署相关 ubuntu linux 运维
1.安装Samba终端输入sudoaptinstallsamba2.配置Samba终端输入sudovim/etc/samba/smb.conf打开配置文件滑动文件到最底下输入以下内容[Share]#要共享的文件夹路径path=/home/xxx/sambasharereadonly=nobrowsable=yes编辑完成后按一下Esc按键后输入:wq回车保存3.重启Samba服务终端输入sudos
Ubuntu Juju 与 Ansible的区别 xidianjiapei001 #Kubernetes ubuntu ansible linux 云原生 Juju
JujuandAnsiblearebothpowerfultoolsusedformanagingandorchestratingITinfrastructureandapplications,buttheyhavedifferentapproachesandusecases.Here’sabreakdownofthekeydifferencesbetweenthem:1.ConceptualFo
python中zeros用法_Python中的numpy.zeros()用法江平舟 python中zeros用法
numpy.zeros()函数是最重要的函数之一,广泛用于机器学习程序中。此函数用于生成包含零的数组。numpy.zeros()函数提供给定形状和类型的新数组,并用零填充。句法numpy.zeros(shape,dtype=float,order='C'参数形状：整数或整数元组此参数用于定义数组的尺寸。此参数用于我们要在其中创建数组的形状,例如(3,2)或2。dtype：数据类型(可选)此参数用于
Kubernetes 自定义控制器开发 IT回忆录 Kubenetes kubernetes
目录前言一、CRD二、创建数据库表（Mysql）二、控制器开发1.使用kubernetes的examplecontroller模板2.在controller.go中新增数据表监听方法3.修改tools工具生成资源对象结构体定义这里记录开发k8s控制器的一般方式，controller开发主要使用k8s提供的client-go库进行。前言Controller监听集群内部资源对象的变化，编辑资源对象(增
【NumPy】深入解析numpy.zeros()函数二七830 numpy
欢迎莅临我的个人主页这里是我深耕Python编程、机器学习和自然语言处理（NLP）领域，并乐于分享知识与经验的小天地！博主简介：我是二七830，一名对技术充满热情的探索者。多年的Python编程和机器学习实践，使我深入理解了这些技术的核心原理，并能够在实际项目中灵活应用。尤其是在NLP领域，我积累了丰富的经验，能够处理各种复杂的自然语言任务。技术专长：我熟练掌握Python编程语言，并深入研究了机
神经网络-损失函数红米煮粥神经网络人工智能深度学习
文章目录一、回归问题的损失函数1.均方误差（MeanSquaredError,MSE）2.平均绝对误差（MeanAbsoluteError,MAE）二、分类问题的损失函数1.0-1损失函数（Zero-OneLossFunction）2.交叉熵损失（Cross-EntropyLoss）3.合页损失（HingeLoss）三、总结在神经网络中，损失函数（LossFunction）扮演着至关重要的角色，它
linux简单安装gcc和gdb chn-zgq Linux linux ubuntu
linux安装gcc以及环境配置和gdb安装gcc-10.0添加源:sudoadd-apt-repositoryppa:ubuntu-toolchain-r/ppa更新源:sudoaptupdate下载gcc:sudoaptinstallgcc-10g++-10默认GCC版本设置为gcc-10.0:sudoupdate-alternatives--install/usr/bin/gccgcc/us
管理员权限的软件不能开机自启动的解决方法 ss_ctrl
这是几种解决方法：1.将启动参数写入到32位注册表里面去在64位系统下我们64位的程序访问此HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run注册表路径，是可以正确访问的，32位程序访问此注册表路径时，默认会被系统自动映射到HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft
怎么样才能成为专业的程序员？ cocos2d-x小菜编程 PHP
如何要想成为一名专业的程序员？仅仅会写代码是不够的。从团队合作去解决问题到版本控制，你还得具备其他关键技能的工具包。当我们询问相关的专业开发人员，那些必备的关键技能都是什么的时候，下面是我们了解到的情况。关于如何学习代码，各种声音很多，然后很多人就被误导为成为专业开发人员懂得一门编程语言就够了？！呵呵，就像其他工作一样，光会一个技能那是远远不够的。如果你想要成为
java web开发高并发处理 BreakingBad java Web 并发开发处理高
java处理高并发高负载类网站中数据库的设计方法（java教程,java处理大量数据，java高负载数据）一：高并发高负载类网站关注点之数据库没错,首先是数据库,这是大多数应用所面临的首个SPOF。尤其是Web2.0的应用，数据库的响应是首先要解决的。一般来说MySQL是最常用的，可能最初是一个mysql主机，当数据增加到100万以上，那么，MySQL的效能急剧下降。常用的优化措施是M-S（
mysql批量更新 ekian mysql
mysql更新优化：一版的更新的话都是采用update set的方式，但是如果需要批量更新的话，只能for循环的执行更新。或者采用executeBatch的方式，执行更新。无论哪种方式，性能都不见得多好。三千多条的更新，需要3分多钟。查询了批量更新的优化，有说replace into的方式，即： replace into tableName(id,status) values
微软BI（3） 18289753290 微软BI SSIS
1) Q：该列违反了完整性约束错误；已获得 OLE DB 记录。源:“Microsoft SQL Server Native Client 11.0” Hresult: 0x80004005 说明:“不能将值 NULL 插入列 'FZCHID'，表 'JRB_EnterpriseCredit.dbo.QYFZCH'；列不允许有 Null 值。INSERT 失败。”。 A：一般这类问题的存在是
Java中的List g21121 java
List是一个有序的 collection（也称为序列）。此接口的用户可以对列表中每个元素的插入位置进行精确地控制。用户可以根据元素的整数索引（在列表中的位置）访问元素，并搜索列表中的元素。与 set 不同，列表通常允许重复
读书笔记永夜-极光读书笔记
1. K是一家加工厂,需要采购原材料,有A,B,C,D 4家供应商,其中A给出的价格最低,性价比最高,那么假如你是这家企业的采购经理,你会如何决策? 传统决策: A:100%订单 B,C,D:0% &nbs
centos 安装 Codeblocks 随便小屋 codeblocks
1.安装gcc,需要c和c++两部分,默认安装下,CentOS不安装编译器的,在终端输入以下命令即可yum install gccyum install gcc-c++ 2.安装gtk2-devel,因为默认已经安装了正式产品需要的支持库,但是没有安装开发所需要的文档.yum install gtk2* 3. 安装wxGTK yum search w
23种设计模式的形象比喻 aijuans 设计模式
1、ABSTRACT FACTORY—追MM少不了请吃饭了，麦当劳的鸡翅和肯德基的鸡翅都是MM爱吃的东西，虽然口味有所不同，但不管你带MM去麦当劳或肯德基，只管向服务员说“来四个鸡翅”就行了。麦当劳和肯德基就是生产鸡翅的Factory 　　工厂模式：客户类和工厂类分开。消费者任何时候需要某种产品，只需向工厂请求即可。消费者无须修改就可以接纳新产品。缺点是当产品修改时，工厂类也要做相应的修改。如：
开发管理 CheckLists aoyouzi 开发管理 CheckLists
开发管理 CheckLists(23) -使项目组度过完整的生命周期开发管理 CheckLists(22) -组织项目资源开发管理 CheckLists(21) -控制项目的范围开发管理 CheckLists(20) -项目利益相关者责任开发管理 CheckLists(19) -选择合适的团队成员开发管理 CheckLists(18) -敏捷开发 Scrum Master 工作开发管理 C
js实现切换百合不是茶 JavaScript 栏目切换
js主要功能之一就是实现页面的特效,窗体的切换可以减少页面的大小,被门户网站大量应用思路: 1,先将要显示的设置为display:bisible 否则设为none 2,设置栏目的id ,js获取栏目的id,如果id为Null就设置为显示 3,判断js获取的id名字;再设置是否显示代码实现: html代码: <di
周鸿祎在360新员工入职培训上的讲话 bijian1013 感悟项目管理人生职场
这篇文章也是最近偶尔看到的，考虑到原博客发布者可能将其删除等原因，也更方便个人查找，特将原文拷贝再发布的。“学东西是为自己的，不要整天以混的姿态来跟公司博弈，就算是混，我觉得你要是能在混的时间里，收获一些别的有利于人生发展的东西，也是不错的，看你怎么把握了”，看了之后，对这句话记忆犹新。 &
前端Web开发的页面效果 Bill_chen html Web Microsoft
1.IE6下png图片的透明显示： <img src="图片地址" border="0" style="Filter.Alpha(Opacity)=数值(100),style=数值(3)"/> 或在<head></head>间加一段JS代码让透明png图片正常显示。 2.<li>标
【JVM五】老年代垃圾回收：并发标记清理GC(CMS GC) bit1129 垃圾回收
CMS概述并发标记清理垃圾回收(Concurrent Mark and Sweep GC）算法的主要目标是在GC过程中，减少暂停用户线程的次数以及在不得不暂停用户线程的请夸功能，尽可能短的暂停用户线程的时间。这对于交互式应用，比如web应用来说，是非常重要的。 CMS垃圾回收针对新生代和老年代采用不同的策略。相比同吞吐量垃圾回收，它要复杂的多。吞吐量垃圾回收在执
Struts2技术总结白糖_ struts2
必备jar文件早在struts2.0.*的时候，struts2的必备jar包需要如下几个： commons-logging-*.jar Apache旗下commons项目的log日志包 freemarker-*.jar
Jquery easyui layout应用注意事项 bozch jquery 浏览器 easyui layout
在jquery easyui中提供了easyui-layout布局，他的布局比较局限，类似java中GUI的border布局。下面对其使用注意事项作简要介绍：如果在现有的工程中前台界面均应用了jquery easyui，那么在布局的时候最好应用jquery eaysui的layout布局，否则在表单页面（编辑、查看、添加等等）在不同的浏览器会出
java-拷贝特殊链表：有一个特殊的链表，其中每个节点不但有指向下一个节点的指针pNext，还有一个指向链表中任意节点的指针pRand，如何拷贝这个特殊链表？ bylijinnan java
public class CopySpecialLinkedList { /** * 题目：有一个特殊的链表，其中每个节点不但有指向下一个节点的指针pNext，还有一个指向链表中任意节点的指针pRand，如何拷贝这个特殊链表？拷贝pNext指针非常容易，所以题目的难点是如何拷贝pRand指针。假设原来链表为A1 -> A2 ->... -> An，新拷贝
color Chen.H JavaScript html css
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <HTML> <HEAD>&nbs
[信息与战争]移动通讯与网络 comsci 网络
两个坚持:手机的电池必须可以取下来光纤不能够入户,只能够到楼宇建议大家找这本书看看:<&
oracle flashback query(闪回查询) daizj oracle flashback query flashback table
在Oracle 10g中，Flash back家族分为以下成员： Flashback Database Flashback Drop Flashback Table Flashback Query(分Flashback Query,Flashback Version Query，Flashback Transaction Query) 下面介绍一下Flashback Drop 和Flas
zeus持久层DAO单元测试 deng520159 单元测试
zeus代码测试正紧张进行中,但由于工作比较忙,但速度比较慢.现在已经完成读写分离单元测试了,现在把几种情况单元测试的例子发出来,希望有人能进出意见,让它走下去. 本文是zeus的dao单元测试: 1.单元测试直接上代码 package com.dengliang.zeus.webdemo.test; import org.junit.Test; import o
C语言学习三printf函数和scanf函数学习 dcj3sjt126com c printf scanf language
printf函数 /* 2013年3月10日20:42:32 地点：北京潘家园功能：目的：测试%x %X %#x %#X的用法 */ # include <stdio.h> int main(void) { printf("哈哈！\n"); // \n表示换行 int i = 10; printf
那你为什么小时候不好好读书? dcj3sjt126com life
dady, 我今天捡到了十块钱, 不过我还给那个人了 good girl! 那个人有没有和你讲thank you啊没有啦....他拉我的耳朵我才把钱还给他的, 他哪里会和我讲thank you 爸爸, 如果地上有一张5块一张10块你拿哪一张呢.... 当然是拿十块的咯... 爸爸你很笨的, 你不会两张都拿爸爸为什么上个月那个人来跟你讨钱, 你告诉他没
iptables开放端口 Fanyucai linux iptables 端口
1，找到配置文件 vi /etc/sysconfig/iptables 2，添加端口开放，增加一行，开放18081端口 -A INPUT -m state --state NEW -m tcp -p tcp --dport 18081 -j ACCEPT 3，保存 ESC :wq! 4，重启服务 service iptables
Ehcache（05）——缓存的查询 234390216 排序 ehcache 统计 query
缓存的查询目录 1. 使Cache可查询 1.1 基于Xml配置 1.2 基于代码的配置 2 指定可搜索的属性 2.1 可查询属性类型 2.2 &
通过hashset找到数组中重复的元素 jackyrong hashset
如何在hashset中快速找到重复的元素呢?方法很多，下面是其中一个办法： int[] array = {1,1,2,3,4,5,6,7,8,8}; Set<Integer> set = new HashSet<Integer>(); for(int i = 0
使用ajax和window.history.pushState无刷新改变页面内容和地址栏URL lanrikey history
后退时关闭当前页面 <script type="text/javascript"> jQuery(document).ready(function ($) { if (window.history && window.history.pushState) {
应用程序的通信成本 netkiller.github.com 虚拟机应用服务器陈景峰 netkiller neo
应用程序的通信成本什么是通信一个程序中两个以上功能相互传递信号或数据叫做通信。什么是成本这是是指时间成本与空间成本。时间就是传递数据所花费的时间。空间是指传递过程耗费容量大小。都有哪些通信方式全局变量线程间通信共享内存共享文件管道 Socket 硬件（串口，USB）等等全局变量全局变量是成本最低通信方法，通过设置
一维数组与二维数组的声明与定义恋洁e生二维数组一维数组定义声明初始化
/** * */ package test20111005; /** * @author FlyingFire * @date:2011-11-18 上午04:33:36 * @author ：代码整理 * @introduce :一维数组与二维数组的初始化 *summary： */ public c
Spring Mybatis独立事务配置 toknowme mybatis
在项目中有很多地方会使用到独立事务，下面以获取主键为例（1）修改配置文件spring-mybatis.xml  <tx:annotation-driven transaction-manager="transactionManager" /> &n
更新Anadroid SDK Tooks之后，Eclipse提示No update were found xp9802 eclipse
使用Android SDK Manager 更新了Anadroid SDK Tooks 之后，打开eclipse提示 This Android SDK requires Android Developer Toolkit version 23.0.0 or above, 点击Check for Updates 检测一会后提示 No update were found

【Autoware】Ubuntu 18.04 ssdcaffe安装与Autoware 检测节点运行

Ubuntu 18.04 + 1.14 Autoware USE CPU&GPU

安装caffe

系统依赖项

获取ssd版caffe

编译前工作

Makefile.config

Makefile

编译

进入文件 DEFINE CPU_ONLY

可能会遇到的问题

/usr/bin/ld: cannot find -lopenblas

更多问题见引用参考

导入模型文件

Autoware 适配

修改CMakeLists.txt

链接库

修改launch 虽然界面也能勾选

编译Autoware

运行

运行runtime_manager

播放BAG

运行vision_ssd_detect节点

效果示意

GPU版本的修改为：

CUDA安装

caffe里的Makefile.config

关于Eigen的版本

源码安装法

编译cafffe

报错类型

atal error: caffe/caffe.hpp: No such file or directory #include “caffe/caffe.hpp”

make test -j8的时候报错

编译Autoware with CUDA

你可能感兴趣的:(Self-Driving,无人驾驶,Ubuntu,&,ROS,Autoware,ssd_detect)