CSTopDown

GIS开发进阶之路（十四） ArcEngine打开cad文件的五种方法、ArcGIS Engine错误码

ArcEngine打开cad文件的几种方法

方法一、通过遍历CAD数据集，依次加载中点线面注记等图层，所加载的数据均为一个独立的图层。

   IWorkspaceFactory pWorkspaceFactory;
　　IFeatureWorkspace pFeatureWorkspace;
　　IFeatureLayer pFeatureLayer;
　　IFeatureDataset pFeatureDataset;
　　//打开CAD数据集
　　pWorkspaceFactory = new CadWorkspaceFactoryClass();
　　pFeatureWorkspace = (IFeatureWorkspace)pWorkspaceFactory.OpenFromFile(directoryPath, 0);
　　//打开一个要素集
　　pFeatureDataset = pFeatureWorkspace.OpenFeatureDataset(fileName);
　　//IFeaturClassContainer可以管理IFeatureDataset中的每个要素类
　　IFeatureClassContainer pFeatureClassContainer = (IFeatureClassContainer)pFeatureDataset;
　　//对CAD文件中的要素进行遍历处理
　　for (int i = 0; i < pFeatureClassContainer.ClassCount - 1; i++)
　　{
　　IFeatureClass pFeatureClass = pFeatureClassContainer.get_Class(i);
　　if (pFeatureClass.FeatureType == esriFeatureType.esriFTAnnotation)
　　{
　　//如果是注记，则添加注记层
　　pFeatureLayer = new CadAnnotationLayerClass();
　　}
　　else//如果是点、线、面，则添加要素层
　　{
　　pFeatureLayer = new FeatureLayerClass();
　　pFeatureLayer.Name = pFeatureClass.AliasName;
　　pFeatureLayer.FeatureClass = pFeatureClass;
　　this.axmc_Main.Map.AddLayer(pFeatureLayer);
　　this.axmc_Main.ActiveView.**();
　　}

　　}

方法二、直接打开CAD数据的点线面注记等要素类，所加载的数据均为一个独立的图层。

   CadWorkspaceFactoryClass fac=new CadWorkspaceFactoryClass ();
   String filePath="E:\\cad";
   IFeatureWorkspace space=fac.OpenFromFile(filePath,0) as IFeatureWorkspace ;
   下面是打开FeatureClass的代码：
   //线
   IFeatureClass polyline =space.OpenFeatureClass("NewCAD.dwg:Polyline");  
   IFeatureLayer layer=new CadFeatureLayerClass ();
   layer.FeatureClass =polyline;
   //点
   IFeatureClass point=space.OpenFeatureClass ("NewCAD.dwg:Point");
   layer=new CadFeatureLayerClass ();
   layer.FeatureClass =point;
   //面  
   IFeatureClass polygon=space.OpenFeatureClass ("NewCAD.dwg:Polygon");
   ayer=new CadFeatureLayerClass();
   layer.FeatureClass =polygon;
   //注记  
   IFeatureClass anno=space.OpenFeatureClass ("NewCAD.dwg:Annotation");
   layer=new CadAnnotationLayerClass();
   layer.FeatureClass =anno;

方法三、利用绘图空间直接加载CAD数据集，加载后各类型数据作为一个图层显示。

　 IWorkspaceFactory pWorkspaceFactory = new CadWorkspaceFactoryClass();
　　IWorkspace pWorkspace = pWorkspaceFactory.OpenFromFile(directoryPath, 0);
　　//--定义一个CAD画图空间，并把上边打开的工作空间赋给它
　　ICadDrawingWorkspace pCadDrawingWorkspace = pWorkspace as ICadDrawingWorkspace;
　　//--定义一个CAD的画图数据集，并且打开上边指定的工作空间中一幅CAD图
　　//--然后赋值给CAD数据集
　　ICadDrawingDataset pCadDrawingDataset = pCadDrawingWorkspace.OpenCadDrawingDataset(fileName);
　　//--通过ICadLayer类，把上边得到的CAD数据局赋值给ICadLayer类对象的
　　//--CadDrawingDataset属性
　　ICadLayer pCadLayer = new CadLayerClass();
　　pCadLayer.CadDrawingDataset = pCadDrawingDataset;
　　//--利用MapControl加载CAD层
　　this.axmc_Main.Map.AddLayer(pCadLayer);
　　this.axmc_Main.ActiveView.**();

方法四、也是遍历CAD点线面，但是不用检查数据类型是否为注记。

   IWorkspaceFactory pWorkspaceFactory = new CadWorkspaceFactoryClass();
　　IFeatureWorkspace pFeatureWorkspace = pWorkspaceFactory.OpenFromFile(directoryPath, 0) as IFeatureWorkspace;
　　IFeatureDataset pFeatureDataset = pFeatureWorkspace.OpenFeatureDataset(fileName);
　　IFeatureClassContainer pFeatureClassContainer = (IFeatureClassContainer)pFeatureDataset;
　　for (int i = 0; i < pFeatureClassContainer.ClassCount - 1; i++)
　　{
　　IFeatureClass pFeatureClass = pFeatureClassContainer.get_Class(i);
　　IFeatureLayer pFeatureLayer = new FeatureLayerClass();
　　pFeatureLayer.FeatureClass = pFeatureClass;
　　//ICadLayer pCadLayer = new CadLayerClass();
　　//pCadLayer = pFeatureLayer as ICadLayer;
　　this.axmc_Main.Map.AddLayer(pFeatureLayer);
　　this.axmc_Main.ActiveView.**();
　　}

方法五、类似于方法三。

   //Add passed file to MapControl
　　ICadDrawingDataset pCadDrawingDataset = GetCadDrawingDataset(directoryPath, fileName);
　　if (pCadDrawingDataset == null) return;
　　ICadLayer pCadLayer = new CadLayerClass();
　　pCadLayer.CadDrawingDataset = pCadDrawingDataset;
　　pCadLayer.Name = fileName;
　　this.axmc_Main.AddLayer(pCadLayer, 0);

　　/// 
　　/// 获取记录集
　　/// 
　　/// 
　　/// 
　　/// 
　　private ICadDrawingDataset GetCadDrawingDataset(string directoryPath, string fileName)
　　{
　　//Create a WorkspaceName object
　　IWorkspaceName pWorkspaceName = new WorkspaceNameClass();
　　pWorkspaceName.WorkspaceFactoryProgID = "esriDataSourcesFile.CadWorkspaceFactory";
　　pWorkspaceName.PathName = directoryPath;
　　//Create a CadDrawingName object
　　IDatasetName pDatasetName = new CadDrawingNameClass();
　　pDatasetName.Name = fileName;
　　pDatasetName.WorkspaceName = pWorkspaceName;
　　//Open the CAD drawing
　　IName pName = (IName)pDatasetName;
　　return (ICadDrawingDataset)pName.Open();
　　}

ArcGIS Engine错误码

序号	*错误代码*	*错误描述*	*错误名称*
0	HRESULT:0x80040201	“Failed to load a resource (string, icon, bitmap, etc).”	LOADING_RESOURCE
1.	HRESULT:0x80040202	The index passed was not within the valid range.	INDEX_OUT_OF_RANGE
2.	HRESULT:0x80040203	The operation is not supported by this implementation.	NOT_SUPPORTED
3.	HRESULT:0x80040204	There is not enough storage space to complete the operation.	NOT_ENOUGH_SPACE
4.	HRESULT:0x80040205	The user does not have permission to execute the operation.	NO_PERMISSION
5.	HRESULT:0x80040206	“Signals that an implementation specific error has occurred and that the client should inspect the error object for additional errors. For example, SDE API errors.”	IMPLEMENTATION
6.	HRESULT:0x80040207	An invalid SQL statement was used.	INVALID_SQL
7.	HRESULT:0x80040208	A networking error occurred.	NETWORK
8.	HRESULT:0x80040209	A date conversion error has occurred.	DATE_CONVERSION
9.	HRESULT:0x8004020A	The object has been deleted and is no longer valid.	OBJECT_IS_DELETED
10.	HRESULT:0x8004020B	The workspace is of the wrong type.	WORKSPACE_NOT_COMPATIBLE
11.	HRESULT:0x8004020C	Modifications to the object are not allowed.	OBJECT_IS_READONLY
12.	HRESULT:0x8004020D	Object is busy.	OBJECT_IN_USE
13.	HRESULT:0x8004020E	Maximum number of objects reached.	OBJECT_MAX_REACHED
14.	HRESULT:0x8004020F	Object is currently locked.	OBJECT_IS_LOCKED
15.	HRESULT:0x80040210	Invalid envelope encountered.	INVALID_ENVELOPE
16.	HRESULT:0x80040211	File read/write error occurred.	FILE_IO
17.	HRESULT:0x80040212	A product licensing error occurred.	LICENSE_FAILURE
18.	HRESULT:0x80040213	An underlying database error occurred.	DBMS_ERROR
19.	HRESULT:0x80040214	An error occurred trying to coerce data from one type to another.	COERCING
20.	HRESULT:0x80040215	A general data binding error occurred.	BINDING
21.	HRESULT:0x80040216	Cannot acquire a schema lock because of an existing lock.	SCHEMA_LOCK_CONFLICT
22.	HRESULT:0x80040217	Must be the owner to do this operation.	MUST_BE_OWNER
23.	HRESULT:0x80040218	Object has no schema locks.	OBJECT_NOT_LOCKED
24.	HRESULT:0x80040219	Connection to Esri OLE DB provider is invalid.	ESRI_PROVIDER_CONNECT_INVALID
25.	HRESULT:0x8004021A	SDE Connection dialog is cancelled.	CONNECTION_CANCELLED
26.	HRESULT:0x8004021B	This release of the Geodatabase is not up to date.	INVALID_RELEASE
27.	HRESULT:0x8004021C	Geodatabase System Tables not found.	NO_SYSTEM_TABLES
28.	HRESULT:0x8004021D	Conflicting connection parameters.	CONNECT_PARAMETERS_CONFLICT
29.	HRESULT:0x8004021E	Geodatabase FieldInfo system table inconsistent.	FIELDINFO_SYSTEM_TABLE_INCONSISTENCY
30.	HRESULT:0x8004021F	The application is not licensed to edit this type of data .	NO_EDIT_LICENSE
31.	HRESULT:0x80040220	The application is not licensed to create or modify schema for this type of data.	NO_SCHEMA_LICENSE
32.	HRESULT:0x80040221	The application does not have the required license for this operation.	NO_OPERATION_LICENSE
33.	HRESULT:0x80040222	The current operation cannot be undone.	OPERATION_CANNOT_BE_UNDONE
34.	HRESULT:0x80040223	The current operation requires an edit operation.	EDIT_OPERATION_REQUIRED
35.	HRESULT:0x80040224	The reconcile operation cannot be undone.	RECONCILE_CANNOT_BE_UNDONE
36.	HRESULT:0x80040225	The object is not initialized.	OBJECT_NOT_INITIALIZED
37.	HRESULT:0x80040226	The integer requires a 64-bit representation.	INTEGER_REQUIRES_64BITS
38.	HRESULT:0x80040227	Syntax error.	SYNTAX_ERROR
39.	HRESULT:0x80040228	License not intialized.	LICENSE_NOT_INITIALIZED
40.	HRESULT:0x80040229	Maximum table size has been exceeded.	TABLE_SIZE_EXCEEDED
41.	HRESULT:0x8004022A	Cannot access secured data.	SECURED_DATA_NO_ACCESS
42.	HRESULT:0x8004022B	An SQL statement containing comment and/or semicolon was used.	INVALID_SQLQUERY
43.	HRESULT:0x8004022C	The name is invalid.	INVALID_NAME
44.	HRESULT:0x8004022D	Cannot acquire a lock.	LOCK_CONFLICT
45.	HRESULT:0x8004022E	Upgrade will need write access to the geodatabase to successfully complete.	UPGRADE_NEEDS_WRITE_ACCESS
46.	HRESULT:0x8004022F	FIDs in FIDSet must not be negative.	NEGATIVE_FID
47.	HRESULT:0x80040230	This version of the Geodatabase client is incompatible with the dataset and cannot open it.	INCOMPATIBLE_CLIENT_VERSION
48.	HRESULT:0x80040231	This functionality is only supported on a Geodatabase release of ArcGIS 10.0 or greater.	NEW_SCHEMA_REQUIRED
49.	HRESULT:0x80040232	The connection format cannot be made forward compatible.	NON_FORWARD_COMPATIBLE_CONNECTION
50.	HRESULT:0x80040251	The workspace is not connected.	WORKSPACE_NOT_CONNECTED
51.	HRESULT:0x80040252	The workspace is already connected.	WORKSPACE_ALREADY_CONNECTED
52.	HRESULT:0x80040253	The server was not found.	SERVER_NOT_FOUND
53.	HRESULT:0x80040254	“The server was found, but is not available at this time.”	SERVER_NOT_AVAILABLE
54.	HRESULT:0x80040255	The server does not allow anymore connections at this time.	SERVER_MAX_CONNECTIONS
55.	HRESULT:0x80040256	The user and/or password is invalid.	USER_INVALID
56.	HRESULT:0x80040257	The user does not have access to the workspace.	USER_NOACCESS
57.	HRESULT:0x80040258	The database was not found.	DATABASE_NOT_FOUND
58.	HRESULT:0x80040259	“The database was found, but is not available at this time.”	DATABASE_NOT_AVAILABLE
59.	HRESULT:0x8004025A	The workspace already exists.	WORKSPACE_ALREADY_EXISTS
60.	HRESULT:0x8004025B	Unable to instantiate workspace extension component.	WORKSPACE_EXTENSION_CREATE_FAILED
61.	HRESULT:0x8004025C	Unable to initialize workspace extension.	WORKSPACE_EXTENSION_INIT_FAILED
62.	HRESULT:0x8004025D	Failed sending dataset created notification to workspace extension.	WORKSPACE_EXTENSION_DATASET_CREATE_FAILED
63.	HRESULT:0x8004025E	Failed sending dataset renamed notification to workspace extension.	WORKSPACE_EXTENSION_DATASET_RENAME_FAILED
64.	HRESULT:0x8004025F	Failed sending dataset deleted notification to workspace extension.	WORKSPACE_EXTENSION_DATASET_DELETE_FAILED
65.	HRESULT:0x80040260	Illegal duplicate workspace extension name.	WORKSPACE_EXTENSION_DUP_NAME
66.	HRESULT:0x80040261	Illegal duplicate workspace extension guid.	WORKSPACE_EXTENSION_DUP_GUID
67.	HRESULT:0x80040262	Altering workspace extension registration requires Geodatabase DBA priveleges.	WORKSPACE_EXTENSION_NO_REG_PRIV
68.	HRESULT:0x80040263	Workspace or data source is read only.	WORKSPACE_READONLY
69.	HRESULT:0x80040264	The dataset is not supported at the workspace level.	DATASET_NOT_SUPPORTED_AT_WORKSPACE_LEVEL
70.	HRESULT:0x80040265	Workspace does not support Keyset Table.	WORKSPACE_NO_KEYSETTABLEMANAGER
71.	HRESULT:0x80040266	Keyset table was not returned.	WORKSPACE_NO_KEYSETTABLE
72.	HRESULT:0x80040267	Returned Keyset id is invalid.	WORKSPACE_INVALID_KEYSETID
73.	HRESULT:0x80040268	A missing or bad connection property was encountered.	WORKSPACEFACTORY_BAD_CONNECTIONPROPERTY
74.	HRESULT:0x80040269	Workspace extensions are not supported.	WORKSPACE_EXTENSION_NOT_SUPPORTED
75.	HRESULT:0x8004026A	Failed sending dataset modified notification to workspace extension.	WORKSPACE_EXTENSION_DATASET_MODIFY_FAILED
76.	HRESULT:0x8004026B	Workspace has no spatial type.	WORKSPACE_NO_SPATIAL_TYPE
77.	HRESULT:0x8004026B	The historical marker already exists.	HISTORICAL_MARKER_ALREADY_EXISTS
78.	HRESULT:0x80040301	The dataset was not found.	DATASET_NOT_FOUND
79.	HRESULT:0x80040302	The dataset name is invalid.	DATASET_INVALID_NAME
80.	HRESULT:0x80040303	The dataset already exists.	DATASET_ALREADY_EXISTS
81.	HRESULT:0x80040304	Cannot rename the dataset with objects already open.	DATASET_CANNOT_RENAME
82.	HRESULT:0x80040305	Invalid dataset type.	DATASET_INVALID_TYPE
83.	HRESULT:0x80040306	Cannot delete the dataset.	DATASET_CANNOT_DELETE
84.	HRESULT:0x80040307	Cannot find the specified feature dataset extension type.	DATASET_EXTENSION_TYPE_NOT_FOUND
85.	HRESULT:0x80040308	The paste operation on the dataset is not supported in the target release of the Geodatabase.	DATASET_PASTE_NOT_SUPPORTED_IN_RELEASE
86.	HRESULT:0x80040309	Cannot rename the dataset.	DATASET_CANNOT_RENAME_NOT_SUPPORTED
87.	HRESULT:0x8004030A	Unable to instantiate dataset extension component.	DATASET_EXTENSION_CREATE_FAILED
88.	HRESULT:0x8004030B	Unable to initialize dataset extension.	DATASET_EXTENSION_INIT_FAILED
89.	HRESULT:0x8004030C	Cannot create a low precision dataset in a high precision database.	CANNOT_CREATE_LOW_PREC_DATASET_IN_HIGH_PREC_DB
90.	HRESULT:0x8004030D	Cannot create a high precision dataset in a low precision database.	CANNOT_CREATE_HIGH_PREC_DATASET_IN_LOW_PREC_DB
91.	HRESULT:0x8004030E	The dataset type is not present in the database.	DATASET_TYPE_NOT_PRESENT
92.	HRESULT:0x8004030F	Cannot copy a feature class without all associated controllers.	CANNOT_COPY_CLASS_WITHOUT_ALL_CONTROLLERS
93.	HRESULT:0x80040310	The dataset type is not supported in this release of the Geodatabase.	DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE
94.	HRESULT:0x80040311	The dataset has an invalid definition.	DATASET_INVALID_DEFINITION
95.	HRESULT:0x80040312	The dataset has an invalid id.	DATASET_INVALID_ID
96.	HRESULT:0x80040313	Cannot rename a dataset that is being edited.	CANNOT_RENAME_WHILE_EDITING
97.	HRESULT:0x80040314	Cannot update the schema of a dataset that is being edited.	CANNOT_MODIFY_SCHEMA_WHILE_EDITING
98.	HRESULT:0x80040315	The dataset is unknown to this version of the Geodatabase client and cannot be opened.	INCOMPATIBLE_CLIENT_CANNOT_OPEN_DATASET
99.	HRESULT:0x80040351	The table was not found.	TABLE_NOT_FOUND
100.	HRESULT:0x80040352	The table name is invalid.	TABLE_INVALID_NAME
101.	HRESULT:0x80040353	The table already exists.	TABLE_ALREADY_EXISTS
102.	HRESULT:0x80040354	The table does not have an ObjectID field.	TABLE_NO_OID_FIELD
103.	HRESULT:0x80040355	The configuration keyword is invalid.	TABLE_INVALID_KEYWORD
104.	HRESULT:0x80040356	The table is not multiversioned.	TABLE_NOT_VERSIONED
105.	HRESULT:0x80040357	Cannot create a table with a duplicate column.	TABLE_DUPLICATE_COLUMN
106.	HRESULT:0x80040358	A column was specified that does not exist.	TABLE_COLUMN_NOT_FOUND
107.	HRESULT:0x80040359	Cannot access this table because it is in use.	TABLE_IN_USE
108.	HRESULT:0x8004035A	The maximum record length has been exceeded.	TABLE_RECORD_LENGTH_EXCEEDED
109.	HRESULT:0x8004035B	The table is multiversioned.	TABLE_VERSIONED
110.	HRESULT:0x8004035C	The table is moving edits to base.	TABLE_MOVINGEDITSTOBASE
111.	HRESULT:0x8004035D	The table has archiving enabled.	TABLE_ARCHIVING
112.	HRESULT:0x8004035E	The table does not have archiving enabled.	TABLE_NOT_ARCHIVING
113.	HRESULT:0x8004035F	The table is historical and is read-only.	TABLE_READONLY_HISTORICAL
114.	HRESULT:0x80040360	The table does not have attachments.	TABLE_NO_ATTACHMENTS
115.	HRESULT:0x80040361	Table attachments not supported in this release of the Geodatabase.	TABLE_ATTACHMENTS_NOT_SUPPORTED
116.	HRESULT:0x80040362	This feature class is based upon a table view and thus cannot be analyzed.	TABLE_CANNOT_ANALYZE_TABLE_VIEW
117.	HRESULT:0x80040363	The table does not have a Global ID field.	TABLE_NO_GLOBALID_FIELD
118.	HRESULT:0x80040364	Attachments are not supported on attachment tables.	ATTACHMENTS_ON_ATTACHMENT_TABLE_NOT_SUPPORTED
119.	HRESULT:0x80040365	Table is not empty.	TABLE_NOT_EMPTY
120.	HRESULT:0x80040366	Attachments only supported on geodatabases.	ATTACHMENTS_ONLY_ON_GEODATABASES
121.	HRESULT:0x80040401	The feature class was not found.	FEATURECLASS_NOT_FOUND
122.	HRESULT:0x80040402	The feature class’s extent could not be retrieved or is invalid.	FEATURECLASS_BAD_EXTENT
123.	HRESULT:0x80040403	Invalid feature class name.	FEATURECLASS_INVALID_NAME
124.	HRESULT:0x80040404	The feature class already exists.	FEATURECLASS_ALREADY_EXISTS
125.	HRESULT:0x80040405	The feature class is currently in load-only mode.	FEATURECLASS_LOAD_MODE
126.	HRESULT:0x80040406	The feature class is in a geometric network and cannot be deleted.	FEATURECLASS_NETWORK_CANNOT_DELETE
127.	HRESULT:0x80040407	The feature class’ default subtype code cannot be retrieved or is invalid.	FEATURECLASS_BAD_DEFAULT_SUBTYPE_CODE
128.	HRESULT:0x80040408	The feature class does not have a specified subtype field.	FEATURECLASS_NO_SUBTYPE_FIELD
129.	HRESULT:0x80040409	The orphan junction featureclass cannot be renamed.	FEATURECLASS_NETWORK_CANNOT_RENAME
130.	HRESULT:0x8004040A	The feature class already has the specified subtype.	FEATURECLASS_SUBTYPE_EXISTS
131.	HRESULT:0x8004040B	The feature dataset is not editable.	FEATURECLASS_FD_NOT_EDITABLE
132.	HRESULT:0x8004040C	The subtype field on a feature class cannot be renamed.	FEATURECLASS_SUBTYPE_FIELD_CANNOT_RENAME
133.	HRESULT:0x8004040D	The specified subtype code is either too large or small to represent.	SUBTYPE_CODE_INVALID
134.	HRESULT:0x8004040E	The specified subtype code does not exist.	SUBTYPE_CODE_DOES_NOT_EXIST
135.	HRESULT:0x8004040F	The value of the subtype code is NULL.	SUBTYPE_CODE_IS_NULL
136.	HRESULT:0x80040410	The value of the subtype code is not a long or short integer.	SUBTYPE_CODE_NOT_INTEGER
137.	HRESULT:0x80040411	The feature class does not have a shape column.	FEATURECLASS_NO_SHAPE_COLUMN
138.	HRESULT:0x80040412	The feature class is in a topology and cannot be deleted.	FEATURECLASS_TOPOLOGY_CANNOT_DELETE
139.	HRESULT:0x80040413	The subtype code is associated with a topology rule.	SUBTYPE_CODE_HAS_ASSOCIATED_TOPOLOGY_RULE
140.	HRESULT:0x80040414	The subtype code is in use and cannot be deleted.	SUBTYPE_IN_USE_CANNOT_DELETE
141.	HRESULT:0x80040415	The subtype code cannot be added.	SUBTYPE_CANNOT_ADD
142.	HRESULT:0x80040416	The spatial cache’s extent is empty or has not been set.	SPATIAL_CACHE_EMPTY_EXTENT
143.	HRESULT:0x80040417	The feature class is already a member of the specified controller.	FEATURECLASS_MEMBER_OF_CONTROLLER
144.	HRESULT:0x80040418	The feature class participates in a geometric network that could not be opened.	FEATURECLASS_CANT_OPEN_GEOMETRICNETWORK
145.	HRESULT:0x80040419	The feature class participates in a topology that could not be opened.	FEATURECLASS_CANT_OPEN_TOPOLOGY
146.	HRESULT:0x8004041A	The feature class is in a network dataset and cannot be deleted.	FEATURECLASS_NETWORK_DATASET_CANNOT_DELETE
147.	HRESULT:0x8004041B	Insufficient privileges to perform the operation.	FEATURECLASS_INSUFFICIENT_PRIVILEGE
148.	HRESULT:0x80040451	The planargraph was not found.	PLANARGRAPH_NOT_FOUND
149.	HRESULT:0x80040501	The geometric network was not found.	GEOMETRICNETWORK_NOT_FOUND
150.	HRESULT:0x80040502	Error adding a feature to a network.	ADD_FEATURE_TO_NETWORK
151.	HRESULT:0x80040503	Error creating a logical network.	CREATE_LOGICAL_NETWORK
152.	HRESULT:0x80040504	The geometric network already exists.	GEOMETRICNETWORK_ALREADY_EXISTS
153.	HRESULT:0x80040505	Geometry corresponding to edge element may not be zero length.	ZERO_LENGTH_EDGE_ELEMENT
154.	HRESULT:0x80040506	Cannot rename a geometric network.	GEOMETRICNETWORK_CANNOT_RENAME
155.	HRESULT:0x80040507	Inconsistent elements in the geometric network.	GEOMETRICNETWORK_ELEMENT_INCONSISTENCY
156.	HRESULT:0x80040508	Feature classes in a geometric network must have homogeneous support for Zs on geometry.	NETWORK_FEATURES_HAVE_HOMOGENEOUS_Z_SUPPORT
157.	HRESULT:0x80040509	There is no error table associated with the geometric network.	NO_ASSOCIATED_ERROR_TABLE
158.	HRESULT:0x8004050A	There is no point geometry associated with the feature element.	FEATURE_ELEMENT_MISSING_POINT_GEOMETRY
159.	HRESULT:0x8004050B	Feature classes in a geometric network must have homogeneous support for Ms on geometry.	NETWORK_FEATURES_HAVE_HOMOGENEOUS_M_SUPPORT
160.	HRESULT:0x8004050C	An existing class has the same name as the orphan junction feature class.	CLASS_EXISTS_WITH_ORPHAN_JUNCTION_CLASS_NAME
161.	HRESULT:0x8004050D	The geometric network name is invalid.	GEOMETRICNETWORK_INVALID_NAME
162.	HRESULT:0x8004050E	The specified field cannot be part of a weight association.	INVALID_FIELD_FOR_WEIGHT_ASSOCIATION
163.	HRESULT:0x8004050F	The specified class cannot be part of a weight association.	INVALID_CLASS_FOR_WEIGHT_ASSOCIATION
164.	HRESULT:0x80040510	The connected feature does not exist.	CONNECTED_FEATURE_DOES_NOT_EXIST
165.	HRESULT:0x80040511	Error opening a logical network.	OPEN_LOGICAL_NETWORK
166.	HRESULT:0x80040512	A network feature has a network element whose id is larger than the maximum eid value in the PROPS table.	NETWORK_ELEMENT_ID_BEYOND_MAX
167.	HRESULT:0x80040513	Edge endpoint is not coincident with junction.	EDGE_ENDPOINT_NOT_COINCIDENT
168.	HRESULT:0x80040514	Cannot delete populated feature class from a geometric network.	CANNOT_DELETE_POPULATED_FEATURE_CLASS
169.	HRESULT:0x80040515	Cannot delete the orphan junction class from a geometric network.	CANNOT_DELETE_ORPHAN_JUNCTION_CLASS
170.	HRESULT:0x80040516	Empty geometric network is not allowed.	EMPTY_GEOMETRICNETWORK_IS_NOT_ALLOWED
171.	HRESULT:0x80040551	The dataset does not support editing.	DATASET_UNEDITABLE
172.	HRESULT:0x80040552	Error starting an edit session.	START_EDITING
173.	HRESULT:0x80040553	Error saving an edit session.	SAVE_EDIT_SESSION
174.	HRESULT:0x80040554	Error stopping an edit session with save edits.	STOP_EDITING_WITH_SAVE
175.	HRESULT:0x80040555	Error stopping an edit session with discard edits.	STOP_EDITING_WITH_DISCARD
176.	HRESULT:0x80040556	This operation is not allowed while editing.	NOT_ALLOWED_WHILE_EDITING
177.	HRESULT:0x80040557	Error in cleaning coverage during save.	COULD_NOT_CLEAN_COVERAGE
178.	HRESULT:0x80040558	No valid InteGrateable Feature layers within Feature Dataset.	NO_INTEGRATEABLE_LAYERS
179.	HRESULT:0x80040559	Invalid Topology.	INVALID_TOPOLOGY
180.	HRESULT:0x8004055A	Operation only allowed while editing.	NOT_EDITING
181.	HRESULT:0x8004055B	Error in encoding INFO item during save.	COULD_NOT_ENCODE_INFO_ITEM
182.	HRESULT:0x8004055C	Node must intersect an arc feature.	NODE_NOT_ON_ARC
183.	HRESULT:0x8004055D	Cannot remove last label from polygon.	CANNOT_REMOVE_LAST_LABEL
184.	HRESULT:0x8004055E	Cannot move label out of polygon.	CANNOT_MOVE_LABEL_OUT_OF_POLYGON
185.	HRESULT:0x8004055F	“Label no longer within valid polygon, deleting.”	INVALID_POLYGON_LABEL_DELETED
186.	HRESULT:0x80040560	Operations that break coverage topology are not supported.	CANNOT_BREAK_TOPOLOGY
187.	HRESULT:0x80040561	Coverage labels cannot be created in the universe polygon.	CANNOT_CREATE_UNIVERSE_LABEL
188.	HRESULT:0x80040562	Coverage labels in the universe polygon cannot be moved.	CANNOT_MOVE_UNIVERSE_LABELS
189.	HRESULT:0x80040563	Invalid geometry.	INVALID_GEOMETRY
190.	HRESULT:0x80040564	Corupted Coverage.	CORUPTED_COVERAGE
191.	HRESULT:0x80040565	Duplicate Field Names within Table.	DUPLICATE_FIELD_NAMES
192.	HRESULT:0x80040566	Cannot edit features with Z values.	CANNOT_EDIT_ZS
193.	HRESULT:0x80040567	“No newly added features, after PolygonSplitLines.”	NO_POLYGONS_CREATED
194.	HRESULT:0x80040568	Unable to save edits because an incorrect edit operation could not be completely rolled back.	ABORT_EDITS_FAILED
195.	HRESULT:0x80040569	Unable to save edits because of failure in flushing edits to the database.	FLUSH_EDITS_FAILED
196.	HRESULT:0x8004056A	Unable to edit the table or feature class because it has a unique index on a non OID field.	CANNOT_EDIT_TABLE_WITH_UNIQ_USER_INDEX
197.	HRESULT:0x8004056B	Unable to edit the dataset because it contains a table or feature class with a unique index on a non OID field.	CANNOT_EDIT_DATASET_WITH_UNIQ_USER_INDEX
198.	HRESULT:0x8004056C	Cannot rebuild polygons from current topology elements.	CANNOT_REBUILD_POLYGONS
199.	HRESULT:0x8004056D	User transaction not allowed at this time.	USERTRANSACTION_NOT_ALLOWED
200.	HRESULT:0x8004056E	The object cannot be edited using the current edit session mode.	NOT_EDITABLE_EDITSESSIONMODE
201.	HRESULT:0x8004056F	Cannot edit compressed data.	CANNOT_EDIT_COMPRESSED_DATASET
202.	HRESULT:0x80040570	Cannot update compressed data.	CANNOT_UPDATE_COMPRESSED_DATASET
203.	HRESULT:0x80040571	Cannot use compressed data for this operation.	COMPRESSED_DATASET_NOT_SUPPORTED
204.	HRESULT:0x80040572	Invalid operation for edit session mode.	INVALID_OPERATION_FOR_EDITSESSIONMODE
205.	HRESULT:0x80040573	FileGDB compression is not installed.	COMPRESSED_DATASET_NOT_INSTALLED
206.	HRESULT:0x80040574	The modified geometry must be a copy.	MODIFIED_GEOMETRY_MUST_BE_COPY
207.	HRESULT:0x80040575	The modified geometry must be a copy.	PENDING_BACKGROUND_PROCESSES
208.	HRESULT:0x80040576	Cannot Start/Stop editing while there is pending Feature/Record set input…	PENDING_GEOPROCESSING_INPUT
209.	HRESULT:0x80040601	This property does not have a SubType.	PROPERTY_NO_SUBTYPE
210.	HRESULT:0x80040602	The property was not found.	PROPERTY_NOT_FOUND
211.	HRESULT:0x80040651	A general error when something is wrong with a Field.	FIELD_INVALID
212.	HRESULT:0x80040652	The name of the Field is unacceptable.	FIELD_INVALID_NAME
213.	HRESULT:0x80040653	An expected Field was not found or could not be retrieved properly.	FIELD_NOT_FOUND
214.	HRESULT:0x80040654	The Field already exists.	FIELD_ALREADY_EXISTS
215.	HRESULT:0x80040655	The Field type is invalid or unsupported for the operation.	FIELD_INVALID_TYPE
216.	HRESULT:0x80040656	“The Field type does not support the current operation. For example, attempting to set OID field to NULL.”	FIELD_UNSUPPORTED_OPERATION
217.	HRESULT:0x80040657	The GeometryType property of the Field is invalid or unsupported for this operation.	FIELD_INVALID_GEOMETRY_TYPE
218.	HRESULT:0x80040658	The Field is not editable.	FIELD_NOT_EDITABLE
219.	HRESULT:0x80040659	The Field is not nullable.	FIELD_NOT_NULLABLE
220.	HRESULT:0x8004065A	The Field corresponds to a weight and may not be deleted.	FIELD_CANNOT_DELETE_WEIGHT_FIELD
221.	HRESULT:0x8004065B	The Field is required and may not be deleted.	FIELD_CANNOT_DELETE_REQUIRED_FIELD
222.	HRESULT:0x8004065C	The Field is a subtype field and may not be deleted.	FIELD_CANNOT_DELETE_SUBTYPE_FIELD
223.	HRESULT:0x8004065D	The Field is the last remaining field and may not be deleted.	FIELD_CANNOT_DELETE_LAST_FIELD
224.	HRESULT:0x8004065E	The Field is the keyword the destination DBMS.	FIELD_IS_KEYWORD
225.	HRESULT:0x8004065F	The field cannot be deleted because it is being used as a relationship key.	FIELD_CANNOT_DELETE_RELKEY_FIELD
226.	HRESULT:0x80040660	The shape field is missing the geometry def.	FIELD_MISSING_GEOMETRY_DEF
227.	HRESULT:0x80040661	The field is used as a relationship key.	FIELD_IS_RELKEY_FIELD
228.	HRESULT:0x80040662	The field is used by Editor Tracking.	FIELD_USED_BY_EDITOR_TRACKING
229.	HRESULT:0x80040663	The field is used to define subtypes.	FIELD_IS_SUBTYPE_FIELD
230.	HRESULT:0x80040664	The field is used to define a network ancillary role.	FIELD_IS_NETWORK_ANCILLARY_FIELD
231.	HRESULT:0x80040665	The field corresponds to a weight.	FIELD_IS_WEIGHT_FIELD
232.	HRESULT:0x80040666	The field is an enabled field associated with a network element.	FIELD_IS_ENABLED_FIELD
233.	HRESULT:0x80040667	The field is required.	FIELD_IS_REQUIRED_FIELD
234.	HRESULT:0x80040701	A general error when something is wrong with the Fields collection.	FIELDS_INVALID
235.	HRESULT:0x80040702	An expected Fields collection was not found or could not be retrieved properly.	FIELDS_NOT_FOUND
236.	HRESULT:0x80040703	The Fields collection did not contain an expected geometry field.	FIELDS_NO_GEOMETRY
237.	HRESULT:0x80040704	The Fields collection did not contain an expected OID field.	FIELDS_NO_OID
238.	HRESULT:0x80040705	The Fields collection contained multiple OID fields.	FIELDS_MULTIPLE_OIDS
239.	HRESULT:0x80040706	The Fields collection contained multiple geometry fields.	FIELDS_MULTIPLE_GEOMETRIES
240.	HRESULT:0x80040707	Another field within the class already has this model name.	FIELDS_MODEL_NAME_ALREADY_EXISTS
241.	HRESULT:0x80040708	The Fields collection contained multiple raster fields.	FIELDS_MULTIPLE_RASTERS
242.	HRESULT:0x80040709	The Fields collection contained multiple GlobalID fields.	FIELDS_MULTIPLE_GLOBALIDS
243.	HRESULT:0x8004070A	The Fields collection is empty.	FIELDS_EMPTY
244.	HRESULT:0x80040751	The operation requires a different index type.	INDEX_WRONG_TYPE
245.	HRESULT:0x80040752	The index already exists.	INDEX_ALREADY_EXISTS
246.	HRESULT:0x80040753	The index was not found.	INDEX_NOT_FOUND
247.	HRESULT:0x80040754	This type of index is not allowed.	INDEX_NOT_ALLOWED
248.	HRESULT:0x80040801	Unable to find a required metadata table.	METADATA_TABLE_NOT_FOUND
249.	HRESULT:0x80040802	A required Field in a metadata table could not be located.	METADATA_FIELD_NOT_FOUND
250.	HRESULT:0x80040803	An error occurred adding an entry to the ESRI_DATASETS table.	METADATA_ADDING_DATASET
251.	HRESULT:0x80040804	An error occurred while adding an entry to the FEATUREDATASET_CLASSES or the FEATURECLASSES table.	METADATA_ADDING_FEATURECLASS
252.	HRESULT:0x80040805	The CLSID read from the FEATURECLASSES table was bad (unable to convert using ::CLSIDFromString).	METADATA_BAD_CLSID
253.	HRESULT:0x80040851	The operation does not support this spatial relationship.	SPATIALREL_NOT_SUPPORTED
254.	HRESULT:0x80040852	The spatial relationship is unknown or not defined.	SPATIALREL_UNKNOWN
255.	HRESULT:0x80040853	The operation does not support this feature type.	FEATURETYPE_NOT_SUPPORTED
256.	HRESULT:0x80040854	The feature type is unknown or not defined.	FEATURETYPE_UNKNOWN
257.	HRESULT:0x80040855	The operation does not support this dataset type.	DATASETTYPE_NOT_SUPPORTED
258.	HRESULT:0x80040856	The dataset type is unknown or not defined.	DATASETTYPE_UNKNOWN
259.	HRESULT:0x80040857	The operation does not support this draw style.	DRAWSTYLE_NOT_SUPPORTED
260.	HRESULT:0x80040858	The draw style is unknown or not defined.	DRAWSTYLE_UNKNOWN
261.	HRESULT:0x80040859	The operation does not support this draw phase.	DRAWPHASE_NOT_SUPPORTED
262.	HRESULT:0x8004085A	The draw phase is unknown or not defined.	DRAWPHASE_UNKNOWN
263.	HRESULT:0x80040901	No support for this geometry type.	GEOMETRY_TYPE_NOT_SUPPORTED
264.	HRESULT:0x80040902	Multipart edge feature geometries not supported.	MULTIPART_EDGE_FEATURE_NOT_SUPPORTED
265.	HRESULT:0x80040903	Geometry has no M values.	GEOMETRY_HAS_NO_M_VALUES
266.	HRESULT:0x80040904	Geometry has no Z values.	GEOMETRY_HAS_NO_Z_VALUES
267.	HRESULT:0x80040905	Geometry has null Z values.	GEOMETRY_HAS_NULL_Z_VALUES
268.	HRESULT:0x80040906	Geometry is not simple.	GEOMETRY_NOT_SIMPLE
269.	HRESULT:0x80040907	Geometry cannot have Z values.	GEOMETRY_CANNOT_HAVE_Z_VALUES
270.	HRESULT:0x80040908	Spatial reference (projection) related error.	GEOMETRY_SPATIAL_REFERENCE
271.	HRESULT:0x80040909	Geometry is missing required spatial reference.	GEOMETRY_MISSING_SPATIAL_REFERENCE
272.	HRESULT:0x8004090A	Polylines with vertical segments cannot be stored in pre-10.0 geodatabase feature classes.	CANT_STORE_VERTICAL_SEGMENT
273.	HRESULT:0x80040951	The row object does not support the IRowSetup interface.	ROW_NO_SETUPINTERFACE
274.	HRESULT:0x80040952	A requested row object could not be located.	ROW_NOT_FOUND
275.	HRESULT:0x80040953	The row does not have an OID.	ROW_NO_OID
276.	HRESULT:0x80040954	Cannot determine the row’s ObjectClass.	ROW_NO_OBJCLASS
277.	HRESULT:0x80040955	The row contains a bad value.	ROW_BAD_VALUE
278.	HRESULT:0x80040956	A row with this OID already exists.	ROW_ALREADY_EXISTS
279.	HRESULT:0x80040957	Cannot compare incompatible types.	COMPARE_TYPE_MISMATCH
280.	HRESULT:0x80040958	Cannot call Store on a recycled row while editing.	CANNOT_STORE_RECYCLED_ROW_IN_EDIT_SESSION
281.	HRESULT:0x80041001	The feature object does not have annotation.	FEATURE_NO_ANNO
282.	HRESULT:0x80041002	The feature object does not have a valid shape.	FEATURE_BAD_SHAPE
283.	HRESULT:0x80041003	The feature falls outside the defined spatial reference.	FEATURE_OUTSIDE_SPATIALREF
284.	HRESULT:0x80041004	The feature is mutually exclusive. Cannot update shape.	FEATURE_SHAPE_UPDATE_BLOCKED
285.	HRESULT:0x80041005	Failed to update feature’s area/length field in response to shape update.	FEATURE_AREA_LENGTH_UPDATE_FAILED
286.	HRESULT:0x80041006	On Delete Message returned failure.	ON_DELETE_MESSAGE_FAILED
287.	HRESULT:0x80041007	Failed to delete part objects for composite object.	DELETE_PART_OBJECTS_FAILED
288.	HRESULT:0x80041008	Failed to delete relationships for object.	DELETE_RELATIONSHIPS_FAILED
289.	HRESULT:0x80041009	On Changed message returned failure.	ON_CHANGED_MESSAGE_FAILED
290.	HRESULT:0x8004100A	Failed to move related features.	MOVE_RELATED_FEATURES_FAILED
291.	HRESULT:0x8004100B	Failed to rotate related features.	ROTATE_RELATED_FEATURES_FAILED
292.	HRESULT:0x8004100C	The feature has been deleted.	FEATURE_DELETED
293.	HRESULT:0x8004100D	The value type is incompatible.	FEATURE_VALUE_TYPE_MISMATCH
294.	HRESULT:0x8004100E	The required custom complex junction was not implemented.	CUSTOM_COMPLEX_JUNCTION_NOT_IMPLEMENTED
295.	HRESULT:0x8004100F	A requested feature object could not be located.	FEATURE_NOT_FOUND
296.	HRESULT:0x80041010	The split operation is not supported on the selected feature’s geometry type.	SPLIT_NOT_SUPPORTED_ON_GEOMETRY_TYPE
297.	HRESULT:0x80041011	Splitting a polygon requires a polyline splitter.	SPLITTING_POLYGONS_REQUIRES_POLYLINE
298.	HRESULT:0x80041012	Splitting a polyline requires a point splitter.	SPLITTING_POLYLINES_REQUIRES_POINT
299.	HRESULT:0x80041013	Split point results in a zero length polyline.	SPLIT_POINT_YIELDS_ZERO_LENGTH_POLYLINE
300.	HRESULT:0x80041014	Cutting polyline results in zero area polygon.	CUTTER_YIELDS_ZERO_AREA_POLYGON
301.	HRESULT:0x80041015	The feature does not have any associated geometry.	FEATURE_NO_GEOMETRY
302.	HRESULT:0x80041016	A required interface on the feature was not found.	REQUIRED_INTERFACE_NOT_FOUND
303.	HRESULT:0x80041017	A required connection point on a complex junction was not found.	REQUIRED_CONNECTION_POINT_NOT_FOUND
304.	HRESULT:0x80041018	The geometry for a complex junction connection point is invalid.	INVALID_CONNECTION_POINT_GEOMETRY
305.	HRESULT:0x80041019	The feature has empty geometry.	FEATURE_EMPTY_GEOMETRY
306.	HRESULT:0x80041051	“This type of cursor does not support this operation. For example, calling UpdateRow on a read-only cursor.”	CURSOR_WRONG_TYPE
307.	HRESULT:0x80041052	The cursor is in an invalid state.	CURSOR_INVALID
308.	HRESULT:0x80041053	The cursor has completed and is at the end.	CURSOR_FINISHED
309.	HRESULT:0x80041054	The cursor cannot aquire a lock against the data.	CURSOR_LOCKED
310.	HRESULT:0x80041055	The cursor has been invalidated because the edit operation has stopped.	CURSOR_INVALIDATED
311.	HRESULT:0x80041101	The ID of the version is bad.	VERSION_BAD_NAME
312.	HRESULT:0x80041102	“The current version does not support editing (base, consistent, or closed).”	VERSION_UNEDITABLE
313.	HRESULT:0x80041103	This operation is not allowed using conflicting versions.	VERSION_HAS_CONFLICTS
314.	HRESULT:0x80041104	The version already exists.	VERSION_ALREADY_EXISTS
315.	HRESULT:0x80041105	The version has been redefined to reference a new database state.	VERSION_REDEFINED
316.	HRESULT:0x80041106	The version could not be located.	VERSION_NOT_FOUND
317.	HRESULT:0x80041107	The version’s internal state ID is invalid.	VERSION_INVALID_STATE
318.	HRESULT:0x80041108	Operation only allowed by the owner of the version.	VERSION_NOT_OWNER
319.	HRESULT:0x80041109	Operation only allowed on versions without children.	VERSION_HAS_CHILDREN
320.	HRESULT:0x8004110A	The version has not been reconciled.	VERSION_NOT_RECONCILED
321.	HRESULT:0x8004110B	Operation not allowed because the version is protected.	VERSION_IS_PROTECTED
322.	HRESULT:0x8004110C	Operation not allowed because the version is in use.	VERSION_IN_USE
323.	HRESULT:0x8004110D	Operation not allowed while the version is being edited.	VERSION_BEING_EDITED
324.	HRESULT:0x8004110E	Operation not allowed while the version is being reconciled.	VERSION_BEING_RECONCILED
325.	HRESULT:0x8004110F	Unable to reconcile: the target version is currently being reconciled against.	RECONCILE_VERSION_NOT_AVAILABLE
326.	HRESULT:0x80041110	Post not allowed after undoing a reconcile.	VERSION_RECONCILE_LOST
327.	HRESULT:0x80041111	Unable to reconcile : Failed filtering conflicts.	FAILED_FILTERING_CONFLICTS
328.	HRESULT:0x80041112	Unable to reconcile : Reconcile version is not an ancestor.	RECONCILE_VERSION_NOT_ANCESTOR
329.	HRESULT:0x80041113	Version cannot be reconciled.	VERSION_CANNOT_BE_RECONCILED
330.	HRESULT:0x80041114	Version cannot be reconciled.	VERSION_NOT_HISTORICAL
331.	HRESULT:0x80041115	The version can only be reconciled with its parent.	VERSION_REQUIRES_PARENT_RECONCILE
332.	HRESULT:0x80041151	DataSource could not be locked.	DATASOURCE_LOCK_FAILED
333.	HRESULT:0x80041152	DataSource lock could not be released.	DATASOURCE_RELEASELOCK_FAILED
334.	HRESULT:0x80041153	DataSource is being used in another application.	DATASOURCE_INUSE_ELSEWHERE
335.	HRESULT:0x80041201	The xy units are invalid.	INVALID_UNITS
336.	HRESULT:0x80041202	The spatial index grid size is invalid.	INVALID_GRID_SIZE
337.	HRESULT:0x80041203	The spatial references do not match.	SPATIALREF_MISMATCH
338.	HRESULT:0x80041204	Invalid spatial reference.	SPATIALREF_INVALID
339.	HRESULT:0x80041205	The M domain is invalid.	INVALID_M_DOMAIN
340.	HRESULT:0x80041206	The spatial reference cannot be altered.	CANNOT_ALTER_SPATIALREF
341.	HRESULT:0x80041207	No spatial reference exists.	NO_SPATIALREF
342.	HRESULT:0x80041208	High precision spatial reference not supported.	HIGH_PRECISION_SR_NOT_SUPPORTED
343.	HRESULT:0x80041209	Low precision spatial reference not supported.	LOW_PRECISION_SR_NOT_SUPPORTED
344.	HRESULT:0x8004120A	The precision cannot be altered.	CANNOT_ALTER_PRECISION
345.	HRESULT:0x8004120B	The spatial reference precision models do not match.	SPATIALREF_PRECISION_MISMATCH
346.	HRESULT:0x8004120C	The resolution value must be larger than zero.	NEGATIVE_RESOLUTION
347.	HRESULT:0x8004120D	The resolution value does not match permissible values.	RESOLUTION_DOES_NOT_MATCH_PERMISSIBLE_VALUE
348.	HRESULT:0x8004120E	The XY domain is invalid.	INVALID_XY_DOMAIN
349.	HRESULT:0x8004120F	Every grid size must be at least three times larger than the preceding grid size.	GRID_SIZE_TOO_SMALL
350.	HRESULT:0x80041210	The Z domain is invalid.	INVALID_Z_DOMAIN
351.	HRESULT:0x80041211	The spatial reference z values do not match.	SPATIALREF_Z_MISMATCH
352.	HRESULT:0x80041251	The spatial filter is invalid.	SPATIALFILTER_INVALID
353.	HRESULT:0x80041252	The geometry property of the spatial filter is invalid.	SPATIALFILTER_INVALID_GEOMETRY
354.	HRESULT:0x80041253	The spatial relation property of the spatial filter is invalid.	SPATIALFILTER_INVALID_SPATIAL_RELATION
355.	HRESULT:0x80041301	Selection sets do not match.	SELECTION_MISMATCH
356.	HRESULT:0x80041302	Selection type is invalid.	SELECTION_INVALID_TYPE
357.	HRESULT:0x80041303	No selectable layers.	SELECTION_NO_SELECTABLE_LAYERS
358.	HRESULT:0x80041351	Unable to instantiate object class instance COM component.	OBJECTCLASS_COULD_NOT_CREATE_CLASS_INSTANCE
359.	HRESULT:0x80041352	Unable to instantiate object class extension COM component.	OBJECTCLASS_COULD_NOT_CREATE_CLASS_EXTENSION
360.	HRESULT:0x80041353	Unable to initialize object class extension COM component.	OBJECTCLASS_COULD_NOT_INITIALIZE_CLASS_EXTENSION
361.	HRESULT:0x80041354	Objects in this object class cannot be updated outside of an edit session.	OBJECTCLASS_REQUIRES_AN_EDIT_SESSION
362.	HRESULT:0x80041355	An object class with this model name already exists.	OBJECTCLASS_MODEL_NAME_ALREADY_EXISTS
363.	HRESULT:0x80041356	The feature dataset is not editable.	CLASS_FD_NOT_EDITABLE
364.	HRESULT:0x80041357	The class extension property set could not be loaded.	COULD_NOT_LOAD_CLASS_EXTENSION_PROPERTIES
365.	HRESULT:0x80041358	The object class is not registered in the Geodatabase.	OBJECTCLASS_NOT_REGISTERED
366.	HRESULT:0x80041359	The class participates in a controller dataset.	OBJECTCLASS_IN_CONTROLLER_DATASET
367.	HRESULT:0x80041501	SDE Error.	SE_FAILURE
368.	HRESULT:0x80041502	SDE Error.	SE_INVALID_LAYERINFO_OBJECT
369.	HRESULT:0x80041503	SDE Error.	SE_NO_ANNOTATION
370.	HRESULT:0x80041504	SDE Error.	SE_FINISHED
371.	HRESULT:0x80041505	SDE Error.	SE_SDE_NOT_STARTED
372.	HRESULT:0x80041506	SDE Error.	SE_UNCHANGED
373.	HRESULT:0x80041508	SDE Error.	SE_CONNECTIONS_EXCEEDED
374.	HRESULT:0x80041509	SDE Error.	SE_LOGIN_NOT_ALLOWED
375.	HRESULT:0x8004150A	SDE Error.	SE_INVALID_USER
376.	HRESULT:0x8004150B	SDE Error.	SE_NET_FAILURE
377.	HRESULT:0x8004150C	SDE Error.	SE_NET_TIMEOUT
378.	HRESULT:0x8004150D	SDE Error.	SE_OUT_OF_SVMEM
379.	HRESULT:0x8004150E	SDE Error.	SE_OUT_OF_CLMEM
380.	HRESULT:0x8004150F	SDE Error.	SE_OUT_OF_CONTEXT
381.	HRESULT:0x80041510	SDE Error.	SE_NO_ACCESS
382.	HRESULT:0x80041511	SDE Error.	SE_TOO_MANY_LAYERS
383.	HRESULT:0x80041512	SDE Error.	SE_NO_LAYER_SPECIFIED
384.	HRESULT:0x80041513	SDE Error.	SE_LAYER_LOCKED
385.	HRESULT:0x80041514	SDE Error.	SE_LAYER_EXISTS
386.	HRESULT:0x80041515	SDE Error.	SE_LAYER_NOEXIST
387.	HRESULT:0x80041516	SDE Error.	SE_LAYER_INUSE
388.	HRESULT:0x80041518	SDE Error.	SE_ROW_NOEXIST
389.	HRESULT:0x8004151A	SDE Error.	SE_ROW_EXISTS
390.	HRESULT:0x8004151B	SDE Error.	SE_LAYER_MISMATCH
391.	HRESULT:0x8004151C	SDE Error.	SE_NO_PERMISSIONS
392.	HRESULT:0x8004151D	SDE Error.	SE_INVALID_NOT_NULL
393.	HRESULT:0x8004151E	SDE Error.	SE_INVALID_SHAPE
394.	HRESULT:0x8004151F	SDE Error.	SE_INVALID_LAYER_NUMBER
395.	HRESULT:0x80041520	SDE Error.	SE_INVALID_ENTITY_TYPE
396.	HRESULT:0x80041521	SDE Error.	SE_INVALID_SEARCH_METHOD
397.	HRESULT:0x80041522	SDE Error.	SE_INVALID_ETYPE_MASK
398.	HRESULT:0x80041523	SDE Error.	SE_BIND_CONFLICT
399.	HRESULT:0x80041524	SDE Error.	SE_INVALID_GRIDSIZE
400.	HRESULT:0x80041525	SDE Error.	SE_INVALID_LOCK_MODE
401.	HRESULT:0x80041526	SDE Error.	SE_ETYPE_NOT_ALLOWED
402.	HRESULT:0x80041528	SDE Error.	SE_INVALID_NUM_OF_PTS
403.	HRESULT:0x80041529	SDE Error.	SE_TABLE_NOEXIST
404.	HRESULT:0x8004152A	SDE Error.	SE_ATTR_NOEXIST
405.	HRESULT:0x8004152B	SDE Error.	SE_LICENSE_FAILURE
406.	HRESULT:0x8004152C	SDE Error.	SE_OUT_OF_LICENSES
407.	HRESULT:0x8004152D	SDE Error.	SE_INVALID_COLUMN_VALUE
408.	HRESULT:0x8004152F	SDE Error.	SE_INVALID_SQL
409.	HRESULT:0x80041530	SDE Error.	SE_LOG_NOEXIST
410.	HRESULT:0x80041531	SDE Error.	SE_LOG_NOACCESS
411.	HRESULT:0x80041532	SDE Error.	SE_LOG_NOTOPEN
412.	HRESULT:0x80041533	SDE Error.	SE_LOG_IO_ERROR
413.	HRESULT:0x80041534	SDE Error.	SE_NO_SHAPES
414.	HRESULT:0x80041535	SDE Error.	SE_NO_LOCKS
415.	HRESULT:0x80041536	SDE Error.	SE_LOCK_CONFLICT
416.	HRESULT:0x80041537	SDE Error.	SE_OUT_OF_LOCKS
417.	HRESULT:0x80041538	SDE Error.	SE_DB_IO_ERROR
418.	HRESULT:0x80041539	SDE Error.	SE_STREAM_IN_PROGRESS
419.	HRESULT:0x8004153A	SDE Error.	SE_INVALID_COLUMN_TYPE
420.	HRESULT:0x8004153B	SDE Error.	SE_TOPO_ERROR
421.	HRESULT:0x8004153C	SDE Error.	SE_ATTR_CONV_ERROR
422.	HRESULT:0x8004153D	SDE Error.	SE_INVALID_COLUMN_DEF
423.	HRESULT:0x8004153E	SDE Error.	SE_INVALID_SHAPE_BUF_SIZE
424.	HRESULT:0x8004153F	SDE Error.	SE_INVALID_ENVELOPE
425.	HRESULT:0x80041540	SDE Error.	SE_TEMP_IO_ERROR
426.	HRESULT:0x80041541	SDE Error.	SE_GSIZE_TOO_SMALL
427.	HRESULT:0x80041542	SDE Error.	SE_LICENSE_EXPIRED
428.	HRESULT:0x80041543	SDE Error.	SE_TABLE_EXISTS
429.	HRESULT:0x80041544	SDE Error.	SE_INDEX_EXISTS
430.	HRESULT:0x80041545	SDE Error.	SE_INDEX_NOEXIST
431.	HRESULT:0x80041546	SDE Error.	SE_INVALID_POINTER
432.	HRESULT:0x80041547	SDE Error.	SE_INVALID_PARAM_VALUE
433.	HRESULT:0x80041548	SDE Error.	SE_ALL_SLIVERS
434.	HRESULT:0x80041549	SDE Error.	SE_TRANS_IN_PROGRESS
435.	HRESULT:0x8004154A	SDE Error.	SE_IOMGR_NO_DBMS_CONNECT
436.	HRESULT:0x8004154B	SDE Error.	SE_DUPLICATE_ARC
437.	HRESULT:0x8004154C	SDE Error.	SE_INVALID_ANNO_OBJECT
438.	HRESULT:0x8004154D	SDE Error.	SE_PT_NO_EXIST
439.	HRESULT:0x8004154E	SDE Error.	SE_PTS_NOT_ADJACENT
440.	HRESULT:0x8004154F	SDE Error.	SE_INVALID_MID_PT
441.	HRESULT:0x80041550	SDE Error.	SE_INVALID_END_PT
442.	HRESULT:0x80041551	SDE Error.	SE_INVALID_RADIUS
443.	HRESULT:0x80041552	SDE Error.	SE_LOAD_ONLY_LAYER
444.	HRESULT:0x80041553	SDE Error.	SE_LAYERS_NOT_FOUND
445.	HRESULT:0x80041554	SDE Error.	SE_FILE_IO_ERROR
446.	HRESULT:0x80041555	SDE Error.	SE_BLOB_SIZE_TOO_LARGE
447.	HRESULT:0x80041556	SDE Error.	SE_CORRIDOR_OUT_OF_BOUNDS
448.	HRESULT:0x80041557	SDE Error.	SE_SHAPE_INTEGRITY_ERROR
449.	HRESULT:0x80041558	SDE Error.	SE_NOT_IMPLEMENTED_YET
450.	HRESULT:0x80041559	SDE Error.	SE_CAD_EXISTS
451.	HRESULT:0x8004155A	SDE Error.	SE_INVALID_TRANSID
452.	HRESULT:0x8004155B	SDE Error.	SE_INVALID_LAYER_NAME
453.	HRESULT:0x8004155C	SDE Error.	SE_INVALID_LAYER_KEYWORD
454.	HRESULT:0x8004155D	SDE Error.	SE_INVALID_RELEASE
455.	HRESULT:0x8004155E	SDE Error.	SE_VERSION_TBL_EXISTS
456.	HRESULT:0x8004155F	SDE Error.	SE_COLUMN_NOT_BOUND
457.	HRESULT:0x80041560	SDE Error.	SE_INVALID_INDICATOR_VALUE
458.	HRESULT:0x80041561	SDE Error.	SE_INVALID_CONNECTION
459.	HRESULT:0x80041562	SDE Error.	SE_INVALID_DBA_PASSWORD
460.	HRESULT:0x80041563	SDE Error.	SE_PATH_NOT_FOUND
461.	HRESULT:0x80041564	SDE Error.	SE_SDEHOME_NOT_SET
462.	HRESULT:0x80041565	SDE Error.	SE_NOT_TABLE_OWNER
463.	HRESULT:0x80041566	SDE Error.	SE_PROCESS_NOT_FOUND
464.	HRESULT:0x80041567	SDE Error.	SE_INVALID_DBMS_LOGIN
465.	HRESULT:0x80041568	SDE Error.	SE_PASSWORD_TIMEOUT
466.	HRESULT:0x80041569	SDE Error.	SE_INVALID_SERVER
467.	HRESULT:0x8004156A	SDE Error.	SE_IOMGR_NOT_AVAILABLE
468.	HRESULT:0x8004156B	SDE Error.	SE_SERVICE_NOT_FOUND
469.	HRESULT:0x8004156C	SDE Error.	SE_INVALID_STATS_TYPE
470.	HRESULT:0x8004156D	SDE Error.	SE_INVALID_DISTINCT_TYPE
471.	HRESULT:0x8004156E	SDE Error.	SE_INVALID_GRANT_REVOKE
472.	HRESULT:0x8004156F	SDE Error.	SE_INVALID_SDEHOME
473.	HRESULT:0x80041570	SDE Error.	SE_INVALID_STREAM
474.	HRESULT:0x80041571	SDE Error.	SE_TOO_MANY_STREAMS
475.	HRESULT:0x80041572	SDE Error.	SE_OUT_OF_MUTEXES
476.	HRESULT:0x80041573	SDE Error.	SE_CONNECTION_LOCKED
477.	HRESULT:0x80041574	SDE Error.	SE_CONNECTION_IN_USE
478.	HRESULT:0x80041575	SDE Error.	SE_NOT_A_SELECT_STATEMENT
479.	HRESULT:0x80041576	SDE Error.	SE_FUNCTION_SEQUENCE_ERROR
480.	HRESULT:0x80041577	SDE Error.	SE_WRONG_COLUMN_TYPE
481.	HRESULT:0x80041578	SDE Error.	SE_PTABLE_LOCKED
482.	HRESULT:0x80041579	SDE Error.	SE_PTABLE_IN_USE
483.	HRESULT:0x8004157A	SDE Error.	SE_STABLE_LOCKED
484.	HRESULT:0x8004157B	SDE Error.	SE_STABLE_IN_USE
485.	HRESULT:0x8004157C	SDE Error.	SE_INVALID_FILTER_TYPE
486.	HRESULT:0x8004157D	SDE Error.	SE_NO_CAD
487.	HRESULT:0x8004157E	SDE Error.	SE_INSTANCE_NOT_AVAILABLE
488.	HRESULT:0x8004157F	SDE Error.	SE_INSTANCE_TOO_EARLY
489.	HRESULT:0x80041580	SDE Error.	SE_INVALID_SYSTEM_UNITS
490.	HRESULT:0x80041581	SDE Error.	SE_INVALID_UNITS
491.	HRESULT:0x80041582	SDE Error.	SE_INVALID_CAD_OBJECT
492.	HRESULT:0x80041583	SDE Error.	SE_VERSION_NOEXIST
493.	HRESULT:0x80041584	SDE Error.	SE_INVALID_SPATIAL_CONSTRAINT
494.	HRESULT:0x80041585	SDE Error.	SE_INVALID_STREAM_TYPE
495.	HRESULT:0x80041586	SDE Error.	SE_INVALID_SPATIAL_COLUMN
496.	HRESULT:0x80041587	SDE Error.	SE_NO_SPATIAL_MASKS
497.	HRESULT:0x80041588	SDE Error.	SE_IOMGR_NOT_FOUND
498.	HRESULT:0x80041589	SDE Error.	SE_SYSTEM_IS_CLIENT_ONLY
499.	HRESULT:0x8004158A	SDE Error.	SE_MULTIPLE_SPATIAL_COLS
500.	HRESULT:0x8004158B	SDE Error.	SE_INVALID_SHAPE_OBJECT
501.	HRESULT:0x8004158C	SDE Error.	SE_INVALID_PARTNUM
502.	HRESULT:0x8004158D	SDE Error.	SE_INCOMPATIBLE_SHAPES
503.	HRESULT:0x8004158E	SDE Error.	SE_INVALID_PART_OFFSET
504.	HRESULT:0x8004158F	SDE Error.	SE_INCOMPATIBLE_COORDREFS
505.	HRESULT:0x80041590	SDE Error.	SE_COORD_OUT_OF_BOUNDS
506.	HRESULT:0x80041591	SDE Error.	SE_LAYER_CACHE_FULL
507.	HRESULT:0x80041592	SDE Error.	SE_INVALID_COORDREF_OBJECT
508.	HRESULT:0x80041593	SDE Error.	SE_INVALID_COORDSYS_ID
509.	HRESULT:0x80041594	SDE Error.	SE_INVALID_COORDSYS_DESC
510.	HRESULT:0x80041595	SDE Error.	SE_INVALID_ROW_ID_LAYER
511.	HRESULT:0x80041596	SDE Error.	SE_PROJECTION_ERROR
512.	HRESULT:0x80041597	SDE Error.	SE_ARRAY_BYTES_EXCEEDED
513.	HRESULT:0x80041598	SDE Error.	SE_POLY_SHELLS_OVERLAP
514.	HRESULT:0x80041599	SDE Error.	SE_TOO_FEW_POINTS
515.	HRESULT:0x8004159A	SDE Error.	SE_INVALID_PART_SEPARATOR
516.	HRESULT:0x8004159B	SDE Error.	SE_INVALID_POLYGON_CLOSURE
517.	HRESULT:0x8004159C	SDE Error.	SE_INVALID_OUTER_SHELL
518.	HRESULT:0x8004159D	SDE Error.	SE_ZERO_AREA_POLYGON
519.	HRESULT:0x8004159E	SDE Error.	SE_POLYGON_HAS_VERTICAL_LINE
520.	HRESULT:0x8004159F	SDE Error.	SE_OUTER_SHELLS_OVERLAP
521.	HRESULT:0x800415A0	SDE Error.	SE_SELF_INTERSECTING
522.	HRESULT:0x800415A1	SDE Error.	SE_INVALID_EXPORT_FILE
523.	HRESULT:0x800415A2	SDE Error.	SE_READ_ONLY_SHAPE
524.	HRESULT:0x800415A3	SDE Error.	SE_INVALID_DATA_SOURCE
525.	HRESULT:0x800415A4	SDE Error.	SE_INVALID_STREAM_SPEC
526.	HRESULT:0x800415A5	SDE Error.	SE_INVALID_ALTER_OPERATION
527.	HRESULT:0x800415A6	SDE Error.	SE_INVALID_SPATIAL_COL_NAME
528.	HRESULT:0x800415A7	SDE Error.	SE_INVALID_DATABASE
529.	HRESULT:0x800415A8	SDE Error.	SE_SPATIAL_SQL_NOT_INSTALLED
530.	HRESULT:0x800415A9	SDE Error.	SE_NORM_DIM_INFO_NOT_FOUND
531.	HRESULT:0x800415AA	SDE Error.	SE_NORM_DIM_TAB_VALUE_NOT_FOUND
532.	HRESULT:0x800415AB	SDE Error.	SE_UNSUPPORTED_NORMALIZED_OPERATION
533.	HRESULT:0x800415AC	SDE Error.	SE_INVALID_REGISTERED_LAYER_OPTION
534.	HRESULT:0x800415AD	SDE Error.	SE_READ_ONLY
535.	HRESULT:0x800415AE	SDE Error.	SE_NO_SDE_ROWID_COLUMN
536.	HRESULT:0x800415AF	SDE Error.	SE_READ_ONLY_COLUMN
537.	HRESULT:0x800415B0	SDE Error.	SE_INVALID_VERSION_NAME
538.	HRESULT:0x800415B1	SDE Error.	SE_STATE_NOEXIST
539.	HRESULT:0x800415B2	SDE Error.	SE_INVALID_STATEINFO_OBJECT
540.	HRESULT:0x800415B3	SDE Error.	SE_VERSION_HAS_MOVED
541.	HRESULT:0x800415B4	SDE Error.	SE_STATE_HAS_CHILDREN
542.	HRESULT:0x800415B5	SDE Error.	SE_PARENT_NOT_CLOSED
543.	HRESULT:0x800415B6	SDE Error.	SE_VERSION_EXISTS
544.	HRESULT:0x800415B7	SDE Error.	SE_TABLE_NOT_MULTIVERSION
545.	HRESULT:0x800415B8	SDE Error.	SE_STATE_USED_BY_VERSION
546.	HRESULT:0x800415B9	SDE Error.	SE_INVALID_VERSIONINFO_OBJECT
547.	HRESULT:0x800415BA	SDE Error.	SE_INVALID_STATE_ID
548.	HRESULT:0x800415BB	SDE Error.	SE_SDETRACELOC_NOT_SET
549.	HRESULT:0x800415BC	SDE Error.	SE_ERROR_LOADING_SSA
550.	HRESULT:0x800415BD	SDE Error.	SE_TOO_MANY_STATES
551.	HRESULT:0x800415BE	SDE Error.	SE_STATES_ARE_SAME
552.	HRESULT:0x800415BF	SDE Error.	SE_NO_ROWID_COLUMN
553.	HRESULT:0x800415C0	SDE Error.	SE_NO_STATE_SET
554.	HRESULT:0x800415C1	SDE Error.	SE_SSA_FUNCTION_ERROR
555.	HRESULT:0x800415C2	SDE Error.	SE_INVALID_REGINFO_OBJECT
556.	HRESULT:0x800415C3	SDE Error.	SE_NO_COMMON_LINEAGE
557.	HRESULT:0x800415C4	SDE Error.	SE_STATE_INUSE
558.	HRESULT:0x800415C5	SDE Error.	SE_STATE_TREE_INUSE
559.	HRESULT:0x800415C6	SDE Error.	SE_INVALID_RASTER_COLUMN
560.	HRESULT:0x800415C7	SDE Error.	SE_RASTERCOLUMN_EXISTS
561.	HRESULT:0x800415C8	SDE Error.	SE_INVALID_MVTABLE_INDEX
562.	HRESULT:0x800415C9	SDE Error.	SE_INVALID_STORAGE_TYPE
563.	HRESULT:0x800415CA	SDE Error.	SE_AMBIGUOUS_NIL_SHAPE
564.	HRESULT:0x800415CB	SDE Error.	SE_INVALID_BYTE_ORDER
565.	HRESULT:0x800415CC	SDE Error.	SE_INVALID_GEOMETRY_TYPE
566.	HRESULT:0x800415CD	SDE Error.	SE_INVALID_NUM_MEASURES
567.	HRESULT:0x800415CE	SDE Error.	SE_INVALID_NUM_PARTS
568.	HRESULT:0x800415CF	SDE Error.	SE_BINARY_TOO_SMALL
569.	HRESULT:0x800415D0	SDE Error.	SE_SHAPE_TEXT_TOO_LONG
570.	HRESULT:0x800415D1	SDE Error.	SE_SHAPE_TEXT_ERROR
571.	HRESULT:0x800415D2	SDE Error.	SE_TOO_MANY_PARTS
572.	HRESULT:0x800415D3	SDE Error.	SE_TYPE_MISMATCH
573.	HRESULT:0x800415D4	SDE Error.	SE_SQL_PARENTHESIS_MISMATCH
574.	HRESULT:0x800415D5	SDE Error.	SE_NIL_SHAPE_NOT_ALLOWED
575.	HRESULT:0x800415D6	SDE Error.	SE_INSTANCE_ALREADY_RUNNING
576.	HRESULT:0x800415D7	SDE Error.	SE_UNSUPPORTED_OPERATION
577.	HRESULT:0x800415D8	SDE Error.	SE_INVALID_EXTERNAL_LAYER_OPTION
578.	HRESULT:0x800415D9	SDE Error.	SE_NORMALIZE_VALUE_NOT_FOUND
579.	HRESULT:0x800415DA	SDE Error.	SE_INVALID_QUERY_TYPE
580.	HRESULT:0x800415DB	SDE Error.	SE_NO_TRACE_LIBRARY
581.	HRESULT:0x800415DC	SDE Error.	SE_TRACE_ON
582.	HRESULT:0x800415DD	SDE Error.	SE_TRACE_OFF
583.	HRESULT:0x800415DE	SDE Error.	SE_SCL_SYNTAX_ERROR
584.	HRESULT:0x800415DF	SDE Error.	SE_TABLE_REGISTERED
585.	HRESULT:0x800415E0	SDE Error.	SE_INVALID_REGISTRATION_ID
586.	HRESULT:0x800415E1	SDE Error.	SE_TABLE_NOREGISTERED
587.	HRESULT:0x800415E2	SDE Error.	SE_TOO_MANY_REGISTRATIONS
588.	HRESULT:0x800415E3	SDE Error.	SE_DELETE_NOT_ALLOWED
589.	HRESULT:0x800415E6	SDE Error.	SE_RASTERCOLUMN_INUSE
590.	HRESULT:0x800415E7	SDE Error.	SE_RASTERCOLUMN_NOEXIST
591.	HRESULT:0x800415E8	SDE Error.	SE_INVALID_RASTERCOLUMN_NUMBER
592.	HRESULT:0x800415E9	SDE Error.	SE_TOO_MANY_RASTERCOLUMNS
593.	HRESULT:0x800415EA	SDE Error.	SE_INVALID_RASTER_NUMBER
594.	HRESULT:0x800415EB	SDE Error.	SE_NO_REQUEST_STATUS
595.	HRESULT:0x800415EC	SDE Error.	SE_NO_REQUEST_RESULTS
596.	HRESULT:0x800415ED	SDE Error.	SE_RASTERBAND_EXISTS
597.	HRESULT:0x800415EE	SDE Error.	SE_RASTERBAND_NOEXIST
598.	HRESULT:0x800415EF	SDE Error.	SE_RASTER_EXISTS
599.	HRESULT:0x800415F0	SDE Error.	SE_RASTER_NOEXIST
600.	HRESULT:0x800415F1	SDE Error.	SE_TOO_MANY_RASTERBANDS
601.	HRESULT:0x800415F2	SDE Error.	SE_TOO_MANY_RASTERS
602.	HRESULT:0x800415F3	SDE Error.	SE_VIEW_EXISTS
603.	HRESULT:0x800415F4	SDE Error.	SE_VIEW_NOEXIST
604.	HRESULT:0x800415F5	SDE Error.	SE_LOCK_EXISTS
605.	HRESULT:0x800415F6	SDE Error.	SE_ROWLOCK_MASK_CONFLICT
606.	HRESULT:0x800415F7	SDE Error.	SE_NOT_IN_RASTER
607.	HRESULT:0x800415F8	SDE Error.	SE_INVALID_RASBANDINFO_OBJECT
608.	HRESULT:0x800415F9	SDE Error.	SE_INVALID_RASCOLINFO_OBJECT
609.	HRESULT:0x800415FA	SDE Error.	SE_INVALID_RASTERINFO_OBJECT
610.	HRESULT:0x800415FB	SDE Error.	SE_INVALID_RASTERBAND_NUMBER
611.	HRESULT:0x800415FC	SDE Error.	SE_MULTIPLE_RASTER_COLS
612.	HRESULT:0x800415FD	SDE Error.	SE_TABLE_SCHEMA_IS_LOCKED
613.	HRESULT:0x800415FE	SDE Error.	SE_INVALID_LOGINFO_OBJECT
614.	HRESULT:0x800415FF	SDE Error.	SE_SQL_TOO_LONG
615.	HRESULT:0x80041600	SDE Error.	SE_UNSUPPORTED_ON_VIEW
616.	HRESULT:0x80041601	SDE Error.	SE_LOG_EXISTS
617.	HRESULT:0x80041602	SDE Error.	SE_SDE_WARNING
618.	HRESULT:0x80041603	SDE Error.	SE_ETYPE_CHANGED
619.	HRESULT:0x80041604	SDE Error.	SE_NO_ROWS_DELETED
620.	HRESULT:0x80041605	SDE Error.	SE_TOO_MANY_DISTINCTS
621.	HRESULT:0x80041606	SDE Error.	SE_NULL_VALUE
622.	HRESULT:0x80041607	SDE Error.	SE_NO_ROWS_UPDATED
623.	HRESULT:0x80041608	SDE Error.	SE_NO_CPGCVT
624.	HRESULT:0x80041609	SDE Error.	SE_NO_CPGHOME
625.	HRESULT:0x8004160A	SDE Error.	SE_DBMS_DOES_NOT_SUPPORT
626.	HRESULT:0x8004160B	SDE Error.	SE_ROWLOCKING_ENABLED
627.	HRESULT:0x8004160C	SDE Error.	SE_ROWLOCKING_NOT_ENABLED
628.	HRESULT:0x8004160D	SDE Error.	SE_LOG_IS_OPEN
629.	HRESULT:0x8004160E	SDE Error.	SE_SPATIALREF_EXISTS
630.	HRESULT:0x8004160F	SDE Error.	SE_SPATIALREF_NOEXIST
631.	HRESULT:0x80041610	SDE Error.	SE_SPATIALREF_IN_USE
632.	HRESULT:0x80041611	SDE Error.	SE_INVALID_SPATIALREFINFO_OBJECT
633.	HRESULT:0x80041612	SDE Error.	SE_INVALID_FUNCTION_ID
634.	HRESULT:0x80041613	SDE Error.	SE_MOSAIC_NOT_ALLOWED
635.	HRESULT:0x80041614	SDE Error.	SE_PASSWORD_EXPIRED
636.	HRESULT:0x80041615	SDE Error.	SE_NO_ARCSDE_LICENSE
637.	HRESULT:0x80041616	SDE Error.	SE_NO_ARCSDE_LICENSE_NO_PERMISSION
638.	HRESULT:0x80041617	SDE Error.	SE_NO_ARCSDE_LICENSE_SQLEXPRESS
639.	HRESULT:0x80041801	The default value is not nullable.	DEFAULT_VALUE_NOT_NULLABLE
640.	HRESULT:0x80041802	The default value is not valid in the domain.	DEFAULT_VALUE_INVALID
641.	HRESULT:0x80041851	An object being transfered is in another Feature Dataset.	OBJECT_IN_ANOTHER_FEATUREDATASET
642.	HRESULT:0x80041852	Only simple features are supported in the simple data converter.	ONLY_SIMPLE_FEATURES_SUPPORTED
643.	HRESULT:0x80041901	The XML being loaded could not be parsed.	XML_PARSE_ERROR
644.	HRESULT:0x80041951	Can only reshape one edge at a time.	TOPOLOGY_ILLEGAL_RESHAPE
645.	HRESULT:0x80041952	The topology with the specified name already exists.	TOPOLOGY_ALREADY_EXISTS
646.	HRESULT:0x80041953	The topology was not found.	TOPOLOGY_NOT_FOUND
647.	HRESULT:0x80041954	The topology cannot be renamed.	TOPOLOGY_CANNOT_RENAME
648.	HRESULT:0x80041955	The feature class in not simple.	INVALID_FEATURE_TYPE_FOR_TOPOLOGY
649.	HRESULT:0x80041956	The feature class has an invalid geometry type.	INVALID_GEOMETRY_TYPE_FOR_TOPOLOGY
650.	HRESULT:0x80041957	The topology rule in invalid or malformed.	INVALID_TOPOLOGY_RULE
651.	HRESULT:0x80041958	The topology workspace extension was not found.	TOPOLOGY_WORKSPACE_EXTENSION_NOT_FOUND
652.	HRESULT:0x80041959	The topology cluster tolerance cannot be reset.	CANNOT_RESET_CLUSTER_TOLERANCE
653.	HRESULT:0x8004195A	Topologies not supported in this release of the Geodatabase.	TOPOLOGIES_NOT_SUPPORTED_IN_RELEASE
654.	HRESULT:0x8004195B	Feature class weight is invalid.	TOPOLOGY_INVALID_WEIGHT
655.	HRESULT:0x8004195C	Topology errors cannot be directly modified.	CANNOT_MODIFY_TOPOLOGY_ERROR_FEATURE
656.	HRESULT:0x8004195D	Geodatabase TopoClasses system table inconsistent.	TOPOCLASSES_SYSTEM_TABLE_INCONSISTENCY
657.	HRESULT:0x8004195E	The specified cluster tolerance is invalid.	INVALID_CLUSTER_TOLERANCE
658.	HRESULT:0x8004195F	The feature class has an invalid geometry type for the topology rule.	INVALID_GEOMETRY_TYPE_FOR_TOPOLOGY_RULE
659.	HRESULT:0x80041960	This operation is not supported on topology errors.	NOT_SUPPORTED_ON_TOPOLOGY_ERROR_FEATURE
660.	HRESULT:0x80041961	System tables cannot be modified.	CANNOT_MODIFY_SYSTEM_MANAGED_TABLES
661.	HRESULT:0x80041962	Topology edge is not selectable.	TOPOLOGY_EDGE_NOT_SELECTABLE
662.	HRESULT:0x80041963	The class is already a member of the topology.	CLASS_ALREADY_MEMBER_OF_TOPOLOGY
663.	HRESULT:0x80041964	An empty envelope was specified for the clean.	EMPTY_ENVELOPE_FOR_CLEAN
664.	HRESULT:0x80041965	Invalid Topology ID.	INVALID_TOPOLOGY_ID
665.	HRESULT:0x80041966	A failure was detected in the topology engine.	TOPOLOGY_ENGINE_FAILURE
666.	HRESULT:0x80041967	A failure was detected in the topology engine overlay processor.	TOPOLOGY_ENGINE_OVERPROC_FAILURE
667.	HRESULT:0x80041968	Invalid topology rule type.	INVALID_TOPOLOGY_RULE_TYPE
668.	HRESULT:0x80041969	Cannot currently partially rebuild the topology graph.	NO_PARTIAL_REBUILD
669.	HRESULT:0x8004196A	Cannot add a registered as versioned class to the topology.	CANNOT_ADD_REGISTERED_CLASS_TO_TOPOLOGY
670.	HRESULT:0x8004196B	The number of errors generated during the topology analysis exceeds the specified threshold.	TOPOLOGY_ERROR_OVERFLOW
671.	HRESULT:0x8004196C	Cannot rename a network.	NETWORK_CANNOT_RENAME
672.	HRESULT:0x8004196D	Invalid network type.	NETWORK_INVALID_TYPE
673.	HRESULT:0x8004196E	Network already exists.	NETWORK_ALREADY_EXISTS
674.	HRESULT:0x8004196F	Network geometry invalid.	NETWORK_INVALID_GEOMETRY_TYPE
675.	HRESULT:0x80041970	Network not found.	NETWORK_NOT_FOUND
676.	HRESULT:0x80041971	Versioning not supported.	VERSIONING_NOT_SUPPORTED
677.	HRESULT:0x80041972	The class must be in the same feature dataset as the topology.	CLASS_NOT_IN_TOPOLOGIES_FEATURE_DATASET
678.	HRESULT:0x80041973	The topology does not contain any associated classes.	TOPOLOGY_HAS_NO_CLASSES
679.	HRESULT:0x80041974	Feature class rank is invalid.	TOPOLOGY_INVALID_RANK
680.	HRESULT:0x80041975	All available physical memory has been consumed.	OUT_OF_PHYSICAL_MEMORY
681.	HRESULT:0x80041976	The topology operation was cancelled by the user.	TOPOLOGY_OPERATION_CANCELLED
682.	HRESULT:0x80041977	The method is only supported on classes participating in a topology.	CLASS_NOT_IN_TOPOLOGY
683.	HRESULT:0x80041978	The endpoint of an edge cannot be modified if it is shared by other topology elements.	MODIFY_EDGE_ENDPOINT
684.	HRESULT:0x80041979	Cannot add a class that is not contained in a feature dataset to a topology.	CANNOT_ADD_STANDALONE_CLASS_TO_TOPOLOGY
685.	HRESULT:0x8004197A	Updates to feature classes in a topology require an edit session.	CLASS_IN_TOPOLOGY_REQUIRES_EDIT_SESSION
686.	HRESULT:0x8004197B	A topology rule cannot be added to a versioned topology.	CANNOT_ADD_RULE_TO_VERSIONED_TOPOLOGY
687.	HRESULT:0x8004197C	Cannot acquire a schema lock because of an existing lock; needed when validating outside edit session.	TOPOLOGY_SCHEMA_LOCK_CONFLICT
688.	HRESULT:0x8004197D	Cannot create a dirty area outside the topology’s spatial domain.	DIRTY_AREA_OUTSIDE_SPATIAL_DOMAIN
689.	HRESULT:0x8004197E	The topology name is invalid.	TOPOLOGY_INVALID_NAME
690.	HRESULT:0x8004197F	The temporary file system space employed by the topology engine is full.	TOPOLOGY_ENGINE_TEMP_SPACE_EXHAUSTED
691.	HRESULT:0x80041980	The topology rule is inconsistent with other topology rules.	INCONSISTENT_TOPOLOGY_RULE
692.	HRESULT:0x80041981	Unsupported topology rule type.	UNSUPPORTED_TOPOLOGY_RULE
693.	HRESULT:0x80041982	Invalid topology rule type.	INVALID_TOPOLOGY_RULE_CLASS_ASSIGNMENT
694.	HRESULT:0x80041983	The operation is not supported inside an edit session.	OPERATION_NOT_SUPPORTED_IN_EDIT_SESSION
695.	HRESULT:0x80041984	A topology graph edit operation caused a feature geometry to become empty.	TOPOLOGY_EMPTY_GEOMETRY
696.	HRESULT:0x80041985	The topology graph cannot be constructed on the specified extent because the requested precision is too high.	TOPOLOGY_EXTENT_TOO_LARGE
697.	HRESULT:0x80041986	Z cluster tolerances are not supported in this release of the Geodatabase.	Z_CLUSTER_TOLERANCE_NOT_SUPPORTED_IN_RELEASE
698.	HRESULT:0x80041987	The operation requires an edit session.	OPERATION_REQUIRES_EDIT_SESSION
699.	HRESULT:0x80041988	The operation is not supported inside an edit session.	OPERATION_NOT_SUPPORTED_IN_EDIT_OPERATION
700.	HRESULT:0x80041989	The operation cannot be applied because the topology graph has not been defined.	TOPOGRAPH_NOT_BUILT
701.	HRESULT:0x8004198A	The topo graph may be corrupt. Please rebuild it.	TOPOGRAPH_CORRUPT
702.	HRESULT:0x8004198B	Nodes representing vertical edges cannot be removed during a merge operation.	CANT_MERGE_VERTICALEDGES
703.	HRESULT:0x8004198C	The selected edges do not all belong to the same set of features.	INCONSISTANT_MERGE_PARENTS
704.	HRESULT:0x8004198D	The selected set of edges does not form a connected path.	EDGE_SET_NOT_CONNECTED
705.	HRESULT:0x8004198E	The topology rule is not supported in this release of the Geodatabase.	TOPOLOGY_RULE_NOT_SUPPORTED_IN_RELEASE
706.	HRESULT:0x8004198F	Can’t merge branching selected edges.	CANT_MERGE_BRANCHINGEDGES
707.	HRESULT:0x80041990	Can’t merge edge for self-overlapping polyline feature.	NOT_PSEUDONODE
708.	HRESULT:0x80041991	A class in the network dataset necessitates edits being run within an edit session.	CLASS_IN_NETWORK_REQUIRES_EDIT_SESSION
709.	HRESULT:0x80041992	Cannot add a class that is registered as versioned to a topology that is not registered as versioned.	CANNOT_ADD_VERSIONED_CLASS_TO_NON_VERSIONED_TOPOLOGY
710.	HRESULT:0x80041993	Cannot add a class that is not registered as versioned to a topology that is registered as versioned.	CANNOT_ADD_NON_VERSIONED_CLASS_TO_VERSIONED_TOPOLOGY
711.	HRESULT:0x80041994	Schema edits to a versioned topology are not supported in this release of the geodatabase.	TOPOLOGIES_SCHEMA_CHANGES_NOT_SUPPORTED_IN_RELEASE
712.	HRESULT:0x80041995	The terrain was not found.	TERRAIN_NOT_FOUND
713.	HRESULT:0x80042051	The Name String syntax of is incorrect.	NAME_STRING_SYNTAX
714.	HRESULT:0x80042101	The input XML is invalid for import into the specified object.	INVALID_IMPORT_XML
715.	HRESULT:0x80042102	The required XML element was not found.	REQUIRED_XML_ELEMENT_NOT_FOUND
716.	HRESULT:0x80042103	No dataset found to export.	XML_EXPORT_DATASET_NOT_FOUND
717.	HRESULT:0x80042151	The object is not in Replicable format (please configure).	CLASS_NOT_REPLICABLE
718.	HRESULT:0x80042152	Conflicts were detected during synchronization between replica pairs.	SYNCHRONIZATION_CONFLICTS
719.	HRESULT:0x80042153	Cannot synchronize because the replica version has not be reconciled against the sync version.	CANNOT_SYNCHRONIZE
720.	HRESULT:0x80042154	Replica data was not found.	REPLICA_NOT_FOUND
721.	HRESULT:0x80042155	Error during reconcile.	RECONCILE_FAILED
722.	HRESULT:0x80042156	Invalid Replica.	INVALID_REPLICA
723.	HRESULT:0x80042157	Generation numbers out of order	GENERATION_OUT_OF_ORDER
724.	HRESULT:0x80042158	Previous synchronization had conflicts	SYNCHRONIZATION_HAS_CONFLICTS
725.	HRESULT:0x80042159	Replication not supported in this release	REPLICATION_NOT_SUPPORTED_IN_RELEASE
726.	HRESULT:0x8004215A	Replication not supported in this release	REPLICATION_NOT_SUPPORTED
727.	HRESULT:0x8004215B	Transmission does not contains changes previously sent	MISSING_ACKNOWLEDGEMENT
728.	HRESULT:0x8004215C	Transmission cannot be sent until acknowledgement of previously sent changes	CANNOT_SEND_TRANSMISSION
729.	HRESULT:0x8004215D	Another synchronization in progess has locked the replica	REPLICA_LOCKED
730.	HRESULT:0x8004215E	An operation in a replica dataset is invalid since a related replica dataset is referenced by the replica.	RELATED_DATASET_IS_REFERENCED_BY_REPLICA
731.	HRESULT:0x8004215F	Operation not supported on a read-only replica	READONLY_REPLICA
732.	HRESULT:0x80042160	Old messages	OLD_MESSAGE
733.	HRESULT:0x80042161	Replica in a SendingData state	REPLICA_IN_SENDING_DATA_STATE
734.	HRESULT:0x80042162	Can only import acknowledgment messages	REPLICA_CAN_ONLY_IMPORT_ACKNOWLEDGMENT
735.	HRESULT:0x80042163	Replica does not have any unacknowledged generations	REPLICA_NO_UNACKNOWLEDGED_GENERATIONS
736.	HRESULT:0x80042164	Multi generations replicas are not supported in workspace	MULTIGEN_REPLICAS_NOT_SUPPORTED_IN_WORKSPACE
737.	HRESULT:0x80042165	Cannot reexport changes from checkouts	CHECKOUTS_CANNOT_REEXPORT_CHANGES
738.	HRESULT:0x80042166	Cannot reexport changes from data receiver replica	REPLICA_RECEIVER_CANNOT_REEXPORT_CHANGES
739.	HRESULT:0x80042167	Cannot export changes from data receiver replica	REPLICA_RECEIVER_CANNOT_EXPORT_CHANGES
740.	HRESULT:0x80042168	Cannot checkout a high precision data to a low precision dataset	CANNOT_CHECKOUT_HIGH_PREC_DATA_IN_LOW_PREC_DATASET
741.	HRESULT:0x80042169	Cannot checkout a high precision data to a low precision dataset	CANNOT_REPLICATE_LOW_PRECISION_DATA
742.	HRESULT:0x8004216A	Invalid output xml file	REPLICA_INVALID_OUTPUT_XML_FILE
743.	HRESULT:0x8004216B	Cannot register replicas for existing datasets.	FDO_NO_MATCH_DATASETS_FOUND_FOR_REGISTER_REPLICAS
744.	HRESULT:0x8004216C	Cannot register non simple dataset in a replica.	NON_SIMPLE_DATASET_CANNOT_BE_REGISTERED_BY_REPLICA
745.	HRESULT:0x8004216D	Replica name contains invalid chars.	INVALID_REPLICA_NAME
746.	HRESULT:0x8004216E	Messages have already been acknowledged.	REPLICA_OLD_ACK
747.	HRESULT:0x8004216F	Messages have already been acknowledged.	REPLICA_SCHEMA_CHANGES_WRONG_DIRECTION
748.	HRESULT:0x80042170	Cannot create empty replica.	CANNOT_CREATE_EMPTY_REPLICA
749.	HRESULT:0x80042171	Cannot create empty replica.	INVALID_DATA_FOR_THIS_OPERATION
750.	HRESULT:0x80042172	Sync version of a replica not yet reconciled and posted.	REPLICA_SYNC_VERSION_NOT_YET_POSTED
751.	HRESULT:0x80042173	Child replica cannot be created in the same database as the source data.	CHILD_REPLICA_CANNOT_BE_CREATED_IN_PARENTDB
752.	HRESULT:0x80042174	GlobalID column cannot be deleted if it is referenced by a replica.	GLOBALID_FIELD_REFERENCED_BY_REPLICA_CANNOT_BE_DELETED
753.	HRESULT:0x80042175	Must be Replica owner to perform this operation.	MUST_BE_REPLICA_OWNER
754.	HRESULT:0x80042176	Replica with the same name already exists.	REPLICA_NAME_ALEARDY_EXISTS
755.	HRESULT:0x80042177	Cannot register empty replica.	CANNOT_REGISTER_EMPTY_REPLICA
756.	HRESULT:0x80042178	Cannot unregister globalID.	FDO_UNREGISTER_GLOBALID_NOT_SUPPORTED
757.	HRESULT:0x80042179	Cannot register nullable globalID.	FDO_REGISTER_NULLABLE_GLOBALID_NOT_SUPPORTED
758.	HRESULT:0x8004217A	Cannot register nullable globalID.	FDO_REGISTER_VERSIONED_GLOBALID_NOT_SUPPORTED
759.	HRESULT:0x8004217B	Cannot create a replica using archiving to a named version.	FDO_ONEWAY_REPLICA_USING_ARCHIVING_NOT_SUPPORTED_IN_NAMED_VERSIONS
760.	HRESULT:0x8004217C	Cannot create oneway replica parent readonly on local workspaces.	FDO_ONEWAY_REPLICA_PARENT_READONLY_NOT_SUPPORTED_IN_LOCAL_CHILD_WORKSPACES
761.	HRESULT:0x8004217D	Cannot synchronize a protected version by anyone other than the owner/dba of the version.	MUST_BE_VERSION_OWNER_TO_SYNC
762.	HRESULT:0x8004217E	Cannot register data as replicas in a transport FileGDB. Only xml transport file is supported.	FDO_DATA_CANNOT_BE_REGISTERED_AS_REPLICAS_IN_TRANSPORT_FGDB
763.	HRESULT:0x8004217F	Operation is not supported. Child and parent replica cannot exist in the same geodatabase.	CHILD_PARENT_REPLICA_CANNOT_EXIST_IN_SAME_GEODATABASE
764.	HRESULT:0x80042180	Failed to set the target name.	FAILED_TO_SET_TARGET_NAME
765.	HRESULT:0x80042251	There is no associated default turn evaluator.	NO_DEFAULT_TURN_EVALUATOR
766.	HRESULT:0x80042252	Feature dataset network dataset containers are not supported.	FEATURE_DATASET_CONTAINERS_NOT_SUPPORTED
767.	HRESULT:0x80042253	The network dataset name is invalid.	NETWORK_DATASET_INVALID_NAME
768.	HRESULT:0x80042254	The network attribute name is invalid.	INVALID_NETWORK_ATTRIBUTE_NAME
769.	HRESULT:0x80042255	The network source is invalid for the evaluator.	INVALID_NETWORK_SOURCE_FOR_EVALUATOR
770.	HRESULT:0x80042256	The expression is invalid for the evaluator.	INVALID_EXPRESSION_FOR_EVALUATOR
771.	HRESULT:0x80042257	Invalid constant for attribute data type.	INVALID_CONSTANT_FOR_NETWORK_ATTRIBUTE
772.	HRESULT:0x80042258	Subtype specification is required (UsesSubtypes is True).	SUBTYPES_REQUIRED
773.	HRESULT:0x80042259	Invalid network dataset schema.	INVALID_NETWORK_DATASET_SCHEMA
774.	HRESULT:0x8004225A	Network object evaluator error.	NETWORK_OBJECT_EVALUATOR_ERROR
775.	HRESULT:0x8004225B	Bad network edge orientation.	NETWORK_BAD_EDGE_ORIENTATION
776.	HRESULT:0x8004225C	The network dataset has an invalid access mode.	NETWORK_DATASET_INVALID_ACCESS
777.	HRESULT:0x8004225D	There is no associated default junction evaluator.	NO_DEFAULT_JUNCTION_EVALUATOR
778.	HRESULT:0x8004225E	There is no associated default edge evaluator.	NO_DEFAULT_EDGE_EVALUATOR
779.	HRESULT:0x8004225F	The network dataset does not support turns.	NETWORK_DATASET_NOTURNS
780.	HRESULT:0x80042260	Network element evaluator error.	NETWORK_ELEMENT_EVALUATOR_ERROR
781.	HRESULT:0x80042261	The dataset for the network source was not found.	NETWORK_SOURCE_DATASET_NOT_FOUND
782.	HRESULT:0x80042262	The source is not valid for the network.	INVALID_NETWORK_SOURCE
783.	HRESULT:0x80042263	The attribute is not valid for the network.	INVALID_NETWORK_ATTRIBUTE
784.	HRESULT:0x80042264	The connectivity group name is invalid.	INVALID_CONNECTIVITY_GROUP_NAME
785.	HRESULT:0x80042265	Subtype specification is not valid.	SUBTYPES_NOT_IN_USE
786.	HRESULT:0x80042266	Network datasets are not supported in this release of the Geodatabase.	NETWORK_DATASETS_NOT_SUPPORTED_IN_RELEASE
787.	HRESULT:0x80042267	The network dataset with the specified name already exists.	NETWORK_DATASET_ALREADY_EXISTS
788.	HRESULT:0x80042268	A connectivity group was not specified for one or more subtypes.	SUBTYPES_UNSPECIFIED_CONN_GROUP
789.	HRESULT:0x80042269	A connectivity policy was not specified for one or more subtypes.	SUBTYPES_UNSPECIFIED_CONN_POLICY
790.	HRESULT:0x8004226A	The geometry type for the feature class is not valid for the network source.	INVALID_NETWORK_SOURCE_GEOMETRY_TYPE
791.	HRESULT:0x8004226B	The feature type of the feature class is not valid for the network source.	INVALID_NETWORK_SOURCE_FEATURE_TYPE
792.	HRESULT:0x8004226C	The fromEdge is not connected to the AtJunction.	FSTAR_INVALID_FROM_EDGE
793.	HRESULT:0x8004226D	The evaluator object could not be created.	EVALUATOR_CREATE
794.	HRESULT:0x8004226E	The evaluator failed to initialize data.	EVALUATOR_INITIALIZE_DATA
795.	HRESULT:0x8004226F	The evaluator failed to initialize for queries.	EVALUATOR_INITIALIZE_QUERY
796.	HRESULT:0x80042270	The evaluator failed to return a value.	EVALUATOR_QUERY
797.	HRESULT:0x80042271	The network element id is invalid.	INVALID_NETWORK_ELEMENT_ID
798.	HRESULT:0x80042272	The network edge direction is invalid.	INVALID_NETWORK_EDGE_DIRECTION
799.	HRESULT:0x80042273	The network edge direction is invalid.	INVALID_NETWORK_TURN_TYPE
800.	HRESULT:0x80042274	There is no turn present at this adjacency index.	TURN_NOT_PRESENT
801.	HRESULT:0x80042275	Build is not supported on this network.	BUILD_NOT_SUPPORTED
802.	HRESULT:0x80042276	The operation is not supported on a buildable network.	OPERATION_NOT_SUPPORTED_ON_BUILDABLE_NETWORK
803.	HRESULT:0x80042277	The source name is invalid.	NETWORK_SOURCE_INVALID_NAME
804.	HRESULT:0x80042278	The element type for the network source is not valid.	NETWORK_SOURCE_INVALID_ELEMENT_TYPE
805.	HRESULT:0x80042279	There is no system junction source.	NO_SYSTEM_JUNCTION_SOURCE
806.	HRESULT:0x8004227A	The system junction source is bad.	BAD_SYSTEM_JUNCTION_SOURCE
807.	HRESULT:0x8004227B	The network element has not been initialized.	NETWORK_ELEMENT_NOT_INITIALIZED
808.	HRESULT:0x8004227C	Attributes cannot be added to network datasets with no sources.	ATTRIBUTES_WITHOUT_SOURCES
809.	HRESULT:0x8004227D	The hierarchy max range values are invalid.	INVALID_HIERARCHY_RANGES
810.	HRESULT:0x8004227E	Network attributes cannot be deleted.	CANNOT_DELETE_NETWORK_ATTRIBUTES
811.	HRESULT:0x8004227F	Network source directions not supported on this network source type.	SOURCE_DIRECTIONS_NOT_SUPPORTED
812.	HRESULT:0x80042280	The network source with the specified name already exists.	NETWORK_SOURCE_ALREADY_EXISTS
813.	HRESULT:0x80042281	The network source with the specified name does not exist.	NETWORK_SOURCE_NAME_DOESNT_EXIST
814.	HRESULT:0x80042282	The network evaluator cannot be used as a default evaluator.	EVALUATOR_CANNOT_BE_DEFAULT_EVALUATOR
815.	HRESULT:0x80042283	The network attribute is invalid for the evaluator.	INVALID_NETWORK_ATTRIBUTE_FOR_EVALUATOR
816.	HRESULT:0x80042284	The network evaluator has not been validated.	EVALUATOR_NOT_VALIDATED
817.	HRESULT:0x80042285	The network evaluator is not valid.	EVALUATOR_NOT_VALID
818.	HRESULT:0x80042286	The network evaluator has not been initialized.	EVALUATOR_NOT_INITIALIZED
819.	HRESULT:0x80042287	The network evaluator has a syntax error.	EVALUATOR_SYNTAX_ERROR
820.	HRESULT:0x80042288	The network field evaluator is associated with a field than cannot be found.	FIELD_EVALUATOR_FIELD_NOT_FOUND
821.	HRESULT:0x80042289	The attribute id value is invalid.	INVALID_NETWORK_ATTRIBUTE_ID
822.	HRESULT:0x8004228A	The network source fullname property is invalid.	NETWORK_SOURCE_INVALID_FULLNAME
823.	HRESULT:0x8004228B	The evaluator in use is not a constant evaluator.	NOT_CONSTANT_EVALUATOR
824.	HRESULT:0x8004228C	Cannot assign a directional evaluator to a junction source.	DIRECTIONAL_EVALUATOR_WITH_JUNCTION_SOURCE
825.	HRESULT:0x8004228D	The data element type is incorrect for the operation.	INCORRECT_DATA_ELEMENT_TYPE
826.	HRESULT:0x8004228E	The number or type of sources are invalid for shapefile-based network datasets.	INVALID_SOURCES_FOR_SHAPEFILE_NETWORK_DATASET
827.	HRESULT:0x8004228F	The network source has an inconsistent elevation field specification.	NETWORK_SOURCE_INCONSISTENT_ELEVATION_SPECIFICATION
828.	HRESULT:0x80042290	The turn feature class does not participate in a network dataset.	TURN_NO_NETWORK
829.	HRESULT:0x80042291	The geometry references too many edges for the turn feature class.	TURN_GEOM_TOO_MANY_VERTICES
830.	HRESULT:0x80042292	The current edge sequence is not valid.	TURN_NOT_VALID
831.	HRESULT:0x80042293	The geometry must have polyline geometry type.	TURN_GEOM_NOT_POLYLINE
832.	HRESULT:0x80042294	A turn must include at least two edges.	TURN_GEOM_NOT_ENOUGH_VERTICES
833.	HRESULT:0x80042295	The geometry cannot be a multipart line.	TURN_GEOM_MULTIPART
834.	HRESULT:0x80042296	The first vertex could not be snapped to a network edge.	TURN_GEOM_NO_FIRST_FEATURE
835.	HRESULT:0x80042297	The last vertex could not be snapped to a network edge.	TURN_GEOM_NO_LAST_FEATURE
836.	HRESULT:0x80042298	The turn references a line feature that does not have network edge elements.	TURN_GEOM_NO_FEATURES
837.	HRESULT:0x80042299	The edges are not adjacent in the network dataset.	TURN_GEOM_DISCONNECTED_FEATURES
838.	HRESULT:0x8004229A	The edges are not adjacent in the network dataset in this sequence.	TURN_GEOM_INVALID_SEQUENCE
839.	HRESULT:0x8004229B	A turn must include at least two edges.	TURN_NOT_ENOUGH_PARTS
840.	HRESULT:0x8004229C	A network edge element used in the middle of the turn sequence cannot also be used at the start or end of the sequence.	TURN_NDS_INTERIOR_EXTERIOR_CONFLICT
841.	HRESULT:0x8004229D	A turn cannot have any self-looping edge elements.	TURN_NDS_EXTERIOR_LOOP
842.	HRESULT:0x8004229E	No edge feature sources have been added to the current map.	TURN_NO_EDGE_SOURCES
843.	HRESULT:0x8004229F	The value for the Edge1End field in the turn feature class is invalid.	TURN_INVALID_EDGE1END
844.	HRESULT:0x800422A0	The direction of the turn cannot be determined.	TURN_GEOM_AMBIGUOUS_FEATURES
845.	HRESULT:0x800422A1	The network dataset cannot be opened as one of its network sources is missing.	NETWORK_MISSING_SOURCE
846.	HRESULT:0x800422A2	Cannot assign a directional evaluator to a turn source.	DIRECTIONAL_EVALUATOR_WITH_TURN_SOURCE
847.	HRESULT:0x800422A3	Cannot find the feature class associated with the network source.	NETWORK_SOURCE_MISSING_FEATURE_CLASS
848.	HRESULT:0x800422A4	The network source must correspond to a simple feature class.	NETWORK_SOURCE_NOT_SIMPLE_FEATURE_CLASS
849.	HRESULT:0x800422A5	The network source participates in multiple network datasets.	NETWORK_SOURCE_IN_MULTIPLE_NETWORKS
850.	HRESULT:0x800422A6	Unable to instantiate the network evaluator component.	NETWORK_EVALUATOR_CREATE_FAILED
851.	HRESULT:0x800422A7	Cannot assign a field evaluator as a default evalautor.	FIELD_EVALUATOR_AS_DEFAULT_EVALUATOR
852.	HRESULT:0x800422A8	Cannot assign a non-directional evaluator with an edge feature source.	NODIRECTIONAL_EVALUATOR_WITH_EDGE_SOURCE
853.	HRESULT:0x800422A9	The network source is missing for the evaluator.	MISSING_NETWORK_SOURCE_FOR_EVALUATOR
854.	HRESULT:0x800422AA	The geometry for a turn cannot start or end at a junction.	TURN_ILLEGAL_START_END_POS
855.	HRESULT:0x800422AB	System junction sources cannot be deleted.	CANNOT_DELETE_SYSTEM_JUNCTION_SOURCE
856.	HRESULT:0x800422AC	The value for one of the edge descriptors is invalid.	TURN_INVALID_EDGE_DESCRIPTOR
857.	HRESULT:0x800422AD	Turn support cannot be changed on an existing network dataset.	TURN_CANNOT_CHANGE_SUPPORT
858.	HRESULT:0x800422AE	The id value cannot be represented in 32 bits.	ID_OVERFLOW
859.	HRESULT:0x800422AF	The value for maximum edges per turn is invalid.	TURN_INVALID_MAX_EDGES
860.	HRESULT:0x800422B0	The value for maximum edges per turn cannot be less than the existing value.	TURN_INVALID_CUR_MAX_EDGES
861.	HRESULT:0x800422B1	The script control is unavailable.	NO_SCRIPT_CONTROL
862.	HRESULT:0x800422B2	The vertices of the turn geometry must intersect each edge in the turn.	TURN_MISSING_EDGE
863.	HRESULT:0x800422B3	The system junction class does not have the elevation field.	MISSING_SYSTEM_JUNCTION_CLASS_ELEV_FIELD
864.	HRESULT:0x800422B4	The system junction class elevation field does not have long integer type.	BAD_TYPE_SYSTEM_JUNCTION_CLASS_ELEV_FIELD
865.	HRESULT:0x800422B5	The schema update is invalid.	INVALID_SCHEMA_UPDATE
866.	HRESULT:0x800422B6	The UseByDefault property on a network attribute is not supported in this Geodatabase release.	USE_BY_DEFAULT_NOT_SUPPORTED
867.	HRESULT:0x800422B7	Signposts on network directions are not supported in this Geodatabase release.	SIGNPOSTS_NOT_SUPPORTED
868.	HRESULT:0x800422B8	The network attribute with the specified name already exists.	NETWORK_ATTRIBUTE_ALREADY_EXISTS
869.	HRESULT:0x800422B9	The network directions output length unit is invalid.	INVALID_DIRECTIONS_LENGTH_UNIT
870.	HRESULT:0x800422BA	The global turn delay categories are overlapping.	OVERLAPPING_NETWORK_GLOBAL_TURN_DELAY_CATEGORIES
871.	HRESULT:0x800422BB	The network attribute does not have cost usage.	NETWORK_ATTRIBUTE_NOT_COST_USAGE
872.	HRESULT:0x800422BC	The network attribute does not have time units.	NETWORK_ATTRIBUTE_NOT_TIME_UNITS
873.	HRESULT:0x800422BD	The network attribute evaluator is self referential.	NETWORK_ATTRIBUTE_REFERENCES_SELF
874.	HRESULT:0x800422BE	The operator used by the network function operator is not supported for this attribute data type.	NETWORK_FUNCTION_EVALUATOR_OPERATOR_NOT_SUPPORTED
875.	HRESULT:0x800422BF	The first argument to the network function evaluator is invalid.	NETWORK_FUNCTION_EVALUATOR_ARGUMENT1_INVALID
876.	HRESULT:0x800422C0	The second argument to the network function evaluator is invalid.	NETWORK_FUNCTION_EVALUATOR_ARGUMENT2_INVALID
877.	HRESULT:0x800422C1	The parameter used by this network function evaluator does not exist.	NETWORK_FUNCTION_EVALUATOR_PARAMETER_MISSING
878.	HRESULT:0x800422C2	The parameter used by this network function evaluator is not numeric.	NETWORK_FUNCTION_EVALUATOR_PARAMETER_NOT_NUMERIC
879.	HRESULT:0x800422C3	The function evaluator value calculation results in a numeric overflow.	NETWORK_FUNCTION_EVALUATOR_OVERFLOW
880.	HRESULT:0x800422C4	The attribute referenced by the network function evaluator does not exist.	NETWORK_FUNCTION_EVALUATOR_MISSING_REFERENCED_NETWORK_ATTRIBUTE
881.	HRESULT:0x800422C5	The attribute referenced by the network function evalutor is not numeric.	NETWORK_FUNCTION_EVALUATOR_REFERENCED_NETWORK_ATTRIBUTE_NOT_NUMERIC
882.	HRESULT:0x800422C6	The network evaluator is not supported.	EVALUATOR_NOT_SUPPORTED
883.	HRESULT:0x800422C7	INetworkForwardStarSetup.AddCachedAttribute has been deprecated and should not be called.	FORWARDSTAR_ADD_CACHED_ATTRIBUTE_DEPRECATED
884.	HRESULT:0x800422C8	INetworkForwardStarSetup.RemoveAllCachedAttributes has been deprecated and should not be called.	FORWARDSTAR_REMOVE_CACHED_ATTRIBUTES_DEPRECATED
885.	HRESULT:0x800422C9	The network attribute usage type is invalid for this operation.	INVALID_NETWORK_ATTRIBUTE_USAGE_TYPE
886.	HRESULT:0x800422CA	The network attribute adjustment type is invalid for the given range along this edge.	INVALID_NETWORK_EDGE_ATTRIBUTE_ADJUSTMENT
887.	HRESULT:0x800422CB	The provided network attribute adjustment value is invalid for this operation on this network attribute.	INVALID_NETWORK_ATTRIBUTE_ADJUSTMENT_VALUE
888.	HRESULT:0x800422CC	The range of positions is invalid for this operation.	INVALID_POSITION_RANGE
889.	HRESULT:0x800422CD	Network elevation model cannot be changed in the existing network dataset.	NETWORK_ELEVATION_MODEL_CANNOT_CHANGE
890.	HRESULT:0x800422CE	Connectivity by Z coordinates is not supported in this geodatabase release.	ZCOORDINATES_NOT_SUPPORTED_IN_RELEASE
891.	HRESULT:0x800422CF	Network source cannot be added to the 3D network dataset since it is not Z-aware.	NETWORK_SOURCE_INVALID_ELAVATION_MODEL
892.	HRESULT:0x800422D0	The network edge does not have a covering hyperedge.	NETWORK_COVERING_HYPEREDGE_DOES_NOT_EXIST
893.	HRESULT:0x800422D1	The evaluator is invalid for shapefile-based network datasets.	INVALID_EVALUATOR_FOR_SHAPEFILE_NETWORK_DATASET
894.	HRESULT:0x800422D2	The usage type or unit type of the evaluator is invalid.	INVALID_USAGE_OR_UNIT_TYPE_FOR_EVALUATOR
895.	HRESULT:0x800422D3	The traffic data is invalid.	INVALID_TRAFFIC_DATA
896.	HRESULT:0x800422D4	The time slice field name is invalid.	INVALID_TIME_SLICE_FIELD_NAME
897.	HRESULT:0x800422D5	Historical traffic data cannot be added to or deleted from the existing network dataset.	HISTORICAL_TRAFFIC_DATA_CANNOT_CHANGE
898.	HRESULT:0x800422D6	The traffic data is not supported.	TRAFFIC_DATA_NOT_SUPPORTED
899.	HRESULT:0x800422D7	Traffic data fallback or time neutral attribute is missing.	TRAFFIC_DATA_ATTRIBUTE_MISSING
900.	HRESULT:0x800422D8	The network dataset does not have a time zone attribute.	NETWORK_DATASET_NO_TIME_ZONE
901.	HRESULT:0x800422D9	The network dataset signpost table is not registered in the Geodatabase.	SIGNPOST_TABLE_NOT_REGISTERED
902.	HRESULT:0x800422DA	The network dataset build should be done outside of an edit session.	BUILD_INSIDE_EDIT_SESSION
903.	HRESULT:0x800422DB	The network dataset has already been built.	BUILDNETWORK_ALREADYBUILD
904.	HRESULT:0x800422DC	“For forward traversal, the AtJunction must be the FromEdge’s ToJunction.”	FSTAR_INVALID_FROM_EDGE_FORWARD
905.	HRESULT:0x800422DD	“For backward traversal, the AtJunction must be the FromEdge’s FromJunction.”	FSTAR_INVALID_FROM_EDGE_BACKWARD
906.	HRESULT:0x800422DE	No matching attribute record found.	NO_ATTRIBUTE_RECORD
907.	HRESULT:0x800422DF	The network dataset needs to be upgraded.	NETWORK_DATASET_NEEDS_UPGRADE
908.	HRESULT:0x800422E0	The network dataset has already being upgraded.	NETWORK_DATASET_ALREADY_UPGRADED
909.	HRESULT:0x800422E1	“The input time value is before January 1, 1970.”	INVALID_TIME_VALUE
910.	HRESULT:0x800422E2	The time usage type is invalid.	INVALID_NETWORK_TIME_USAGE_TYPE
911.	HRESULT:0x800422E3	Invalid time zone ObjectID.	INVALID_TIME_ZONE_OBJECTID
912.	HRESULT:0x800422E4	Invalid time zone name.	INVALID_TIME_ZONE_NAME
913.	HRESULT:0x800422E5	The length attribute used by the traffic data is missing.	TRAFFIC_DATA_LENGTH_ATTRIBUTE_MISSING
914.	HRESULT:0x800422E6	The number of input array values must equal the number of time slices specified in the last call to StartEditing.	INVALID_TIME_SLICE_ARRAY
915.	HRESULT:0x800422E7	Schema edits to a versioned network dataset are not supported.	NETWORK_SCHEMA_CHANGES_NOT_SUPPORTED
916.	HRESULT:0x800422E8	The landmark source is not valid.	INVALID_NETWORK_LANDMARK_SOURCE
917.	HRESULT:0x800422E9	The geometry type for the feature class is not valid for the network landmark source.	INVALID_NETWORK_LANDMARK_SOURCE_GEOMETRY_TYPE
918.	HRESULT:0x800422EA	Invalid or missing network landmark source field.	INVALID_NETWORK_LANDMARK_SOURCE_FIELD
919.	HRESULT:0x800422EB	A time zone network attribute is required for network datasets that use live traffic feeds.	TIME_ZONE_ATTRIBUTE_IS_REQUIRED
920.	HRESULT:0x80042401	The cadastral fabric name is invalid.	CADASTRAL_FABRIC_INVALID_NAME
921.	HRESULT:0x80042402	Cadastral fabrics are not supported in this release of the Geodatabase.	CADASTRAL_FABRICS_NOT_SUPPORTED_IN_RELEASE
922.	HRESULT:0x80042403	A cadastral fabric with the specified name already exists.	CADASTRAL_FABRIC_ALREADY_EXISTS
923.	HRESULT:0x80042404	A job with the specified name already exists for the cadastral fabric.	CADASTRAL_FABRIC_JOB_ALREADY_EXISTS
924.	HRESULT:0x80042405	The status of the job is invalid for this procedure.	CADASTRAL_FABRIC_JOB_INVALID_STATUS
925.	HRESULT:0x80042406	Schema error. Required fields are missing.	CADASTRAL_FABRIC_SCHEMA_CORRUPTION
926.	HRESULT:0x80042407	Lock already exists for cadastral feature.	CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS
927.	HRESULT:0x80042408	System table is missing.	CADASTRAL_FABRIC_MISSING_SYSTEM_TABLE
928.	HRESULT:0x80042409	Data is corrupted.	CADASTRAL_FABRIC_DATA_CORRUPTION
929.	HRESULT:0x8004240A	Job has already been committed.	CADASTRAL_FABRIC_JOB_ALREADY_COMMITTED
930.	HRESULT:0x8004240B	The cadastral job was not found.	CADASTRAL_FABRIC_JOB_NOT_FOUND
931.	HRESULT:0x8004240C	XML Packet failed to load.	CADASTRAL_FABRIC_PACKET_LOAD_FAILED
932.	HRESULT:0x8004240D	XML Packet is missing required data.	CADASTRAL_FABRIC_PACKET_MISSING_DATA
933.	HRESULT:0x8004240E	The specified cadastral job does not belong to the current fabric.	JOB_DOES_NOT_BELONG_TO_FABRIC
934.	HRESULT:0x8004240F	Edits to the fabric require an edit session.	CADASTRAL_FABRIC_PACKET_POST_REQUIRES_EDIT_SESSION
935.	HRESULT:0x80042410	Cannot commit a cadastral job that contains unjoined parcels.	JOB_UNJOINED_PARCEL_PRESENT
936.	HRESULT:0x80042411	The version of XML cannot be loaded.	CADASTRAL_FABRIC_XML_PARSER_NOT_FOUND
937.	HRESULT:0x80042412	Cadastral feature already updated in default version.	CADASTRAL_FABRIC_OBJECT_ALREADY_MODIFIED
938.	HRESULT:0x80042413	Cadastral feature is part of a job that is currently been edited.	CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED
939.	HRESULT:0x80042414	Source Datum does not match Cadastral Fabric Datum.	CADASTRAL_FABRIC_DATUM_MISMATCH
940.	HRESULT:0x80042415	Cannot reconcile grandchild versions with fabric edits against default.	CADASTRAL_FABRIC_ILLEGAL_RECONCILE
941.	HRESULT:0x80042416	Cannot commit the given job - no name supplied.	CADASTRAL_FABRIC_COMMIT_NO_NAME
942.	HRESULT:0x80042417	Cannot commit the given job - not in default.	CADASTRAL_FABRIC_COMMIT_NOT_DEFAULT
943.	HRESULT:0x80042418	Cannot commit the given job - the job is currently locked.	CADASTRAL_FABRIC_COMMIT_JOB_LOCKED
944.	HRESULT:0x80042419	Cannot delete the given job - the job is not committed.	CADASTRAL_FABRIC_JOB_NOT_COMMITTED
945.	HRESULT:0x8004241A	Copy paste of a topology with a cadastral fabric dataset is not supported in this release.	CADASTRAL_FABRIC_COPY_WITH_TOPOLOGY_NOT_SUPPORTED_IN_RELEASE
946.	HRESULT:0x8004241B	The cadastral fabric operation was cancelled.	CADASTRAL_FABRIC_OPERATION_CANCELLED
947.	HRESULT:0x8004241C	The parcel fabric dataset has already being upgraded.	CADASTRAL_FABRIC_ALREADY_UPGRADED
948.	HRESULT:0x80042501	Personal SDE can only have one editor.	PERSONAL_SDE_ONE_EDITOR
949.	HRESULT:0x80042502	Failed to connect to Database Server.	CANNOT_CONNECT_TO_SERVER
950.	HRESULT:0x80042601	The item was not found.	ITEM_NOT_FOUND
951.	HRESULT:0x80042602	The item with path already exists.	ITEM_WITH_PATH_EXISTS
952.	HRESULT:0x80042603	The item does not have a definition.	ITEM_DOES_NOT_HAVE_DEFINITION
953.	HRESULT:0x80042604	The catalog path is invalid.	INVALID_CATALOG_PATH
954.	HRESULT:0x80042605	A relationship already exists between these items.	ITEM_RELATIONSHIP_EXISTS
955.	HRESULT:0x80042606	Cannot change the visibility of an existing item.	CANNOT_CHANGE_ITEM_VISIBILITY
956.	HRESULT:0x80042607	Item relationship visibility must match the visibility of the related items.	RELATIONSHIP_VISIBILITY_INVALID
957.	HRESULT:0x80042608	UpdateDataset cannot change this property.	CANNOT_CHANGE_ITEM_PROPERTY
958.	HRESULT:0x80042609	Item relationship attributes are invalid.	RELATIONSHIP_ATTRIBUTES_INVALID
959.	HRESULT:0x8004260A	Cannot upgrade because there are other active connections.	OTHER_ACTIVE_CONNECTIONS
960.	HRESULT:0x8004260B	User does not have required priviliges to upgrade.	USER_DOES_NOT_HAVE_UPGRADE_PRIVILIGES
961.	HRESULT:0x8004260C	Instance is not upgradable.	INSTANCE_IS_NOT_UPGRADABLE
962.	HRESULT:0x8004260D	Instance does not support XML type.	INSTANCE_DOES_NOT_SUPPORT_XML_TYPE
963.	HRESULT:0x8004260E	The item relationship was not found.	ITEM_RELATIONSHIP_NOT_FOUND
964.	HRESULT:0x8004260F	The item associated with an item relationship was not found.	ITEM_RELATIONSHIP_ITEM_NOT_FOUND
965.	HRESULT:0x80042610	The dataset definition is missing an expected controller membership.	DEFINITION_MISSING_CONTROLLER_MEMBERSHIP
966.	HRESULT:0x80042611	The catalog item corresponds to an unknown type.	UNKNOWN_CATALOG_TYPE
967.	HRESULT:0x80042701	The geodatabase doesn’t support unmanaged raster catalogs.	DOES_NOT_SUPPORT_UNMANAGED_RASTER_CATALOG
968.	HRESULT:0x80042801	No spatial column present	QUERYDESCRIPTION_NOSPATIALCOLUMN
969.	HRESULT:0x80042802	Invalid column.	QUERYDESCRIPTION_INVALIDCOLUMN
970.	HRESULT:0x80042803	OID not a mapped column.	QUERYDESCRIPTION_OIDNOTMAPPEDCOLUMN
971.	HRESULT:0x80042804	Column exists.	QUERYDESCRIPTION_COLUMNEXISTS
972.	HRESULT:0x80042805	Invalid field type.	QUERYDESCRIPTION_INVALIDFIELDTYPE
973.	HRESULT:0x80042806	Oid mapped column has null value.	QUERYTABLE_OIDMAPPEDCOLUMNHASNULL
974.	HRESULT:0x80042807	Query description out of sync.	QUERYDESCRIPTION_OUTOFSYNC
975.	HRESULT:0x80042808	Fields used for OID mapping missing.	QUERYDESCRIPTION_OIDFIELDSMISSING
976.	HRESULT:0x80042809	Geometry type not supported.	QUERYDESCRIPTION_INVALIDGEOMETRYTYPE
977.	HRESULT:0x8004280A	Failed to parse the where clause.	QUERYCLASS_INVALIDWHERE
978.	HRESULT:0x8004280B	Oid value is unknown.	QUERYCLASS_OIDUNKNOWN
979.	HRESULT:0x8004280C	Query missing.	QUERYTABLE_QUERYMISSING
980.	HRESULT:0x8004280D	Workspace missing.	QUERYTABLE_WORKSPACEMISSING
981.	HRESULT:0x8004280E	Oid column has null value.	QUERYTABLE_OIDCOLUMNHASNULL
982.	HRESULT:0x8004280F	Geometry type is null geometry.	QUERYCLASS_NULLGEOMETRYTYPE
983.	HRESULT:0x80042810	Srid is invalid.	QUERYCLASS_INVALIDSRID
984.	HRESULT:0x80042811	Spatial reference is invalid.	QUERYCLASS_INVALIDSPATIALREFERENCE
985.	HRESULT:0x80042812	Class name is invalid.	QUERYCLASS_INVALIDNAME
986.	HRESULT:0x80042851	Unable to obtain origin primary key value.	RELCLASS_COULD_NOT_GET_ORIG_PRIM_KEY
987.	HRESULT:0x80042852	Unable to obtain origin foreign key value.	RELCLASS_COULD_NOT_GET_ORIG_FOR_KEY
988.	HRESULT:0x80042853	Unable to obtain destination primary key value.	RELCLASS_COULD_NOT_GET_DEST_PRIM_KEY
989.	HRESULT:0x80042854	Unable to obtain destination foreign key value.	RELCLASS_COULD_NOT_GET_DEST_FOR_KEY
990.	HRESULT:0x80042855	The relationship class is incompatible with an existing relationship class.	RELCLASS_INCOMPATIBLE_WITH_EXISTING_RELCLASS
991.	HRESULT:0x80042856	Cannot reset foreign keys for an existing relationship row.	RELCLASS_CANNOT_RESET_FKEYS
992.	HRESULT:0x80042857	Invalid foreign key value.	RELCLASS_INVALID_FKEY
993.	HRESULT:0x80042858	QueryDef-based search returned an invalid cursor.	RELCLASS_INVALID_CURSOR
994.	HRESULT:0x80042859	The relationship class was not found.	RELATIONSHIPCLASS_NOT_FOUND
995.	HRESULT:0x8004285A	Invalid relationship class name.	RELATIONSHIPCLASS_INVALID_NAME
996.	HRESULT:0x8004285B	The relationship class already exists.	RELATIONSHIPCLASS_ALREADY_EXISTS
997.	HRESULT:0x8004285C	Invalid relationship class specification.	RELATIONSHIPCLASS_INVALID_SPEC
998.	HRESULT:0x8004285D	Cannot open origin or destination class of this relationship class.	RELATIONSHIPCLASS_ORIGIN_DEST_NOT_FOUND
999.	HRESULT:0x8004285E	The replace command cannot be completed because the attributed relationship row’s origin and/or destination class object does not exist. Ensure that both of the related objects are present before attempting to execute the replace with command.	MISSING_ORIGIN_OR_DESTINATION_OBJECT
1000.	HRESULT:0x80042901	The connectivity rule is invalid/malformed.	INVALID_CONNECTIVITY_RULE
1001.	HRESULT:0x80042902	Validation not supported on non-SQL datasets.	VALIDATION_NOT_SUPPORTED
1002.	HRESULT:0x80042903	The cardinality specified for the connectivity rule is invalid.	INVALID_CARDINALITY
1003.	HRESULT:0x80042904	Default junctions not supported in this release of the Geodatabase.	DEFAULT_JUNCTIONS_NOT_SUPPORTED_IN_RELEASE
1004.	HRESULT:0x80042905	Altering this type of validation rule not supported.	ALTERING_RULE_NOT_SUPPORTED
1005.	HRESULT:0x80042906	Connectivity rules are not supported on simple features.	CONNECTIVITY_RULES_NOT_SUPPORTED
1006.	HRESULT:0x80042907	Cannot alter a non-existant rule.	CANNOT_ALTER_NON_EXISTANT_RULE
1007.	HRESULT:0x80042908	Validation rule not found.	RULE_NOT_FOUND
1008.	HRESULT:0x80042951	Zero-length polylines not allowed.	ZERO_LENGTH_POLYLINE
1009.	HRESULT:0x80042952	Closed polylines not allowed.	CLOSED_POLYLINE
1010.	HRESULT:0x80042953	Junction feature does not have network ancillary role.	NO_NETWORK_ANCILLARY_ROLE
1011.	HRESULT:0x80042954	Flipping polylines not allowed.	FLIPPED_POLYLINE
1012.	HRESULT:0x80042955	Splitting junction features not allowed.	CANNOT_SPLIT_JUNCTION
1013.	HRESULT:0x80042956	Invalid network ancillary role.	INVALID_NETWORK_ANCILLARY_ROLE
1014.	HRESULT:0x80042957	Cannot add an orphan junction on top of an existing junction.	CANNOT_ADD_ORPHAN_JUNCTION_ON_EXISTING_JUNCTION
1015.	HRESULT:0x80042958	The specified junction index is invalid.	INVALID_JUNCTION_INDEX
1016.	HRESULT:0x80042959	Unable to set the enabled field associated with a network element.	CANNOT_SET_ENABLED_FIELD
1017.	HRESULT:0x8004295A	Unable to set the weight field associated with a network element.	CANNOT_SET_WEIGHT_FIELD
1018.	HRESULT:0x8004295B	An invalid type of geometry is being set into a complex junction.	INVALID_GEOMETRY_FOR_COMPLEX_JUNCTION
1019.	HRESULT:0x8004295C	An invalid geometry type is associated with a network feature class.	INVALID_GEOMETRY_TYPE_FOR_NETWORK_FEATURE_CLASS
1020.	HRESULT:0x8004295D	The network feature does not have an associated network element.	NO_ASSOCIATED_NETWORK_ELEMENT
1021.	HRESULT:0x8004295E	The edge feature has the same from and to junctions.	IDENTICAL_FROM_TO_JUNCTIONS
1022.	HRESULT:0x8004295F	The edge feature is missing either a from or to junction.	EDGE_MISSING_ENDPOINT_JUNCTION
1023.	HRESULT:0x80042960	The connected edge feature has invalid connectivity.	CONNECTED_EDGE_INVALID_CONNECTIVITY
1024.	HRESULT:0x80042961	A connected feature has inconsistent connectivity and cannot be corrected.	INVALID_CONNECTIVITY_CANNOT_BE_CORRECTED
1025.	HRESULT:0x80042962	Invalid network feature class.	INVALID_NETWORK_FEATURE_CLASS
1026.	HRESULT:0x80043001	The domain was not found.	DOMAIN_NOT_FOUND
1027.	HRESULT:0x80043002	The domain is used by an attribute rule.	DOMAIN_USED_BY_ATTRIBUTE_RULE
1028.	HRESULT:0x80043003	The domain is used as a default domain.	DOMAIN_USED_AS_DEFAULT_DOMAIN
1029.	HRESULT:0x80043004	Domain name already in use.	DOMAIN_NAME_ALREADY_EXISTS
1030.	HRESULT:0x80043005	The value of the domain exceeds the length of the field.	DOMAIN_VALUE_EXCEEDS_FIELD_LENGTH
1031.	HRESULT:0x80043006	The existing domain owner does not match that of the updated domain.	DOMAIN_OWNER_DOESNT_MATCH
1032.	HRESULT:0x80043007	The existing domain field type does not match that of the updated domain.	DOMAIN_FIELD_TYPE_DOESNT_MATCH
1033.	HRESULT:0x80043008	The domain type is not supported.	DOMAIN_TYPE_NOT_SUPPORTED
1034.	HRESULT:0x80043009	The value being added to the coded value domain already exists.	CODED_VALUE_DOMAIN_VALUE_ALREADY_EXISTS
1035.	HRESULT:0x8004300A	Client cocreated domains may not be locked.	CANNOT_LOCK_COCREATED_DOMAIN
1036.	HRESULT:0x8004300B	The domain is already used by another workspace.	DOMAIN_USED_BY_OTHER_WORKSPACE
1037.	HRESULT:0x8004300C	The domain field type does not match that of the field it is being assigned to.	DOMAIN_FIELD_TYPE_MISMATCH
1038.	HRESULT:0x8004300D	Domain may not be locked as the user is not the owner.	CANNOT_LOCK_DOMAIN_AS_NOT_OWNER
1039.	HRESULT:0x8004300E	The specified default domain was not found.	DEFAULT_DOMAIN_NOT_FOUND
1040.	HRESULT:0x8004300F	The domain record was not found.	DOMAIN_RECORD_NOT_FOUND
1041.	HRESULT:0x80043010	The existing domain type does not match that of the updated domain.	DOMAIN_TYPE_DOESNT_MATCH
1042.	HRESULT:0x80043011	The name of an entry in the coded value domain is empty.	CODED_VALUE_DOMAIN_NAME_EMPTY
1043.	HRESULT:0x80043012	The value is not compatible with the field types associated with the coded value domain.	CODED_VALUE_DOMAIN_VALUE_NOT_COMPATIBLE
1044.	HRESULT:0x80043013	The value type is inconsistent with other associated value types in the coded value domain.	CODED_VALUE_DOMAIN_VALUE_INCONSISTENT
1045.	HRESULT:0x80043014	The field type is not compatible with the associated value types in the coded value domain.	CODED_VALUE_DOMAIN_FIELD_TYPE_NOT_COMPATIBLE
1046.	HRESULT:0x80043015	The domain cannot be deleted.	CANNOT_DELETE_DOMAIN
1047.	HRESULT:0x80043016	The domain name is invalid.	DOMAIN_INVALID_NAME
1048.	HRESULT:0x80043017	The domain definition is different from the domain of the same name in the workspace.	DOMAIN_DOES_NOT_MATCH_WORKSPACE
1049.	HRESULT:0x80043018	The domain is incompatible with the existing default value.	DOMAIN_INCOMPATIBLE_WITH_DEFAULT_VALUE
1050.	HRESULT:0x80043019	The process has timed out while waiting for traffic update downloads.	TRAFFIC_DOWNLOAD_TIMEOUT
1051.	HRESULT:0x8004301A	An error was encountered connecting to the dynamic traffic data. Verify that the network dataset’s Traffic Feed property is correctly set and that you have access to this location.	REFRESH_DYNAMIC_TRAFFIC_ERROR
1052.	HRESULT:0x80043051	Invalid name object.	INVALID_NAME_OBJECT

你可能感兴趣的:(GIS开发进阶之路（十四） ArcEngine打开cad文件的五种方法、ArcGIS Engine错误码)

斤斤计较的婚姻到底有多难？白心之岂必有为
很多人私聊我会问到在哪个人群当中斤斤计较的人最多？我都会回答他，一般婚姻出现问题的斤斤计较的人士会非常多，以我多年经验，在婚姻落的一塌糊涂的人当中，斤斤计较的人数占比在20～30%以上，也就是说10个婚姻出现问题的斤斤计较的人有2-3个有多不减。在婚姻出问题当中，有大量的心理不平衡的、尖酸刻薄的怨妇。在婚姻中仅斤斤计较有两种类型：第一种是物质上的，另一种是精神上的。在物质与精神上抠门已经严重的影响
情绪觉察日记第37天露露_e800
今天是家庭关系规划师的第二阶最后一天，慧萍老师帮我做了个案，帮我处理了埋在心底好多年的一份恐惧，并给了我深深的力量！这几天出来学习，爸妈过来婆家帮我带小孩，妈妈出于爱帮我收拾东西，并跟我先生和婆婆产生矛盾，妈妈觉得他们没有照顾好我…。今晚回家见到妈妈，我很欣赏她并赞扬她，妈妈说今晚要跟我睡我说好，当我们俩躺在床上准备睡觉的时候，我握着妈妈的手对她说:妈妈这几天辛苦你了，你看你多利害把我们的家收拾得
芦花鞋一四许叶晗
又是在一个寒冷的夏日里，青铜和葵花决定今天一起去卖芦花鞋，奶奶亲手给他们做了一碗热乎乎的粥对他们说:“就靠你们两挣生活费了这碗粥赶紧趁热喝了吧！”于是青铜和葵花喝完了奶奶给她们做的粥，就准备去镇上卖卢花鞋，这回青铜和葵花穿着新的芦花鞋来到了镇上。青铜这回看到了很多人都在卖，用手势表达对葵花说:“这回有好多人在抢我们生意呢！我们必须得吆喝起来。”葵花点了点头。可是谁知他们也大声的叫，卖芦花喽！卖芦花
QQ群采集助手，精准引流必备神器 2401_87347160 其他经验分享
功能概述微信群查找与筛选工具是一款专为微信用户设计的辅助工具，它通过关键词搜索功能，帮助用户快速找到相关的微信群，并提供筛选是否需要验证的群组的功能。主要功能关键词搜索：用户可以输入关键词，工具将自动查找包含该关键词的微信群。筛选功能：工具提供筛选机制，用户可以选择是否只显示需要验证或不需要验证的群组。精准引流：通过上述功能，用户可以更精准地找到目标群组，进行有效的引流操作。3.设备需求该工具可以
关于沟通这件事，项目经理不需要每次都面对面进行流程大师兄
很多项目经理都会遇到这样的问题，项目中由于事情太多，根本没有足够的时间去召开会议，那在这种情况下如何去有效地管理项目中的利益相关者？当然，不建议电子邮件也不需要开会的话，建议可以采取下面几种方式来形成有效的沟通，这几种方式可以帮助你努力的通过各种办法来保持和各方面的联系。项目经理首先要问自己几个问题，项目中哪些利益相关者是必须要进行沟通的？可以列出项目中所有的利益相关者清单，同时也整理出项目中哪些
机器学习与深度学习间关系与区别 ℒℴѵℯ心·动ꦿ໊ོ꫞ 人工智能学习深度学习 python
一、机器学习概述定义机器学习（MachineLearning,ML）是一种通过数据驱动的方法，利用统计学和计算算法来训练模型，使计算机能够从数据中学习并自动进行预测或决策。机器学习通过分析大量数据样本，识别其中的模式和规律，从而对新的数据进行判断。其核心在于通过训练过程，让模型不断优化和提升其预测准确性。主要类型1.监督学习（SupervisedLearning）监督学习是指在训练数据集中包含输入
铭刻于星（四十二）随风至
69夜晚，绍敏同学做完功课后，看了眼房外，没听到动静才敢从书包的夹层里拿出那个心形纸团。折痕压得很深，都有些旧了，想来是已经写好很久了。绍敏同学慢慢地、轻轻地捏开折叠处，待到全部拆开后，又反复抚平纸张，然后仔细地一字字默看。只是开头的三个字是第一次看到，让她心漏跳了几拍。“亲爱的绍敏：从四年级的时候，我就喜欢你了，但是我一直不敢说，怕影响你学习。六年级的时候听说有人跟你表白，你接受了，我很难过，但
底层逆袭到底有多难，不甘平凡的你准备好了吗？让吴起给你说说造命者说
底层逆袭到底有多难，不甘平凡的你准备好了吗？让吴起给你说说我叫吴起，生于公元前440年的战国初期，正是群雄并起、天下纷争不断的时候。后人说我是军事家、政治家、改革家，是兵家代表人物。评价我一生历仕鲁、魏、楚三国，通晓兵家、法家、儒家三家思想，在内政军事上都有极高的成就。周安王二十一年（公元前381年），因变法得罪守旧贵族，被人乱箭射死。我出生在卫国一个“家累万金”的富有家庭，从年轻时候起就不甘平凡
2020-01-25 晴岚85
郑海燕坚持分享590天2020.1.24在生活中只存在两个问题。一个问题是：你知道想要达成的目标是什么，但却不知道如何才能达成；另一个问题是：你不知道你的目标是什么。前一个是行动的问题，后一个是结果的问题。通过制定具体的下一步行动，可以解决不知道如何开始行动的问题。而通过去想象结果，对结果做预估，可以解决找不着目标的问题。对于所有吸引我们注意力，想要完成的任务，你可以先想象一下，预期的结果究竟是什
随笔 | 仙一般的灵气海思沧海
仙岛今天，我看了你全部，似乎已经进入你的世界我不知道，这是否是梦幻，还是你仙一般的灵气吸引了我也许每一个人都要有一份属于自己的追求，这样才能够符合人生的梦想，生活才能够充满着阳光与快乐我不知道，我为什么会这样的感叹，是在感叹自己的人生，还是感叹自己一直没有孜孜不倦的追求只感觉虚度了光阴，每天活在自己的梦中，活在一个不真实的世界是在逃避自己，还是在逃避周围的一切有时候我嘲笑自己，嘲笑自己如此的虚无，
想家爆米花机
也许不同于大家对家乡的思念，我对家乡甚至是疯狂的不舍。还未踏出车站就感觉到幸福，我享受这里的夕阳、这里的浓烈柴火味、这里每一口家常菜。我是宅女，我贪恋家的安逸。刚刚踏出大学校门，初出茅庐，无法适应每年只能国庆和春节回家。我焦虑、失眠、无端发脾气，是无法适应工作的节奏，是无法接受我将一步步离开家乡的事实。我不想承认自己胸无大志，选择再次踏上征程。图片发自App
【iOS】MVC设计模式 Magnetic_h ios mvc 设计模式 objective-c 学习 ui
MVC前言如何设计一个程序的结构，这是一门专门的学问，叫做"架构模式"（architecturalpattern），属于编程的方法论。MVC模式就是架构模式的一种。它是Apple官方推荐的App开发架构，也是一般开发者最先遇到、最经典的架构。MVC各层controller层Controller/ViewController/VC（控制器）负责协调Model和View，处理大部分逻辑它将数据从Mod
OC语言多界面传值五大方式 Magnetic_h ios ui 学习 objective-c 开发语言
前言在完成暑假仿写项目时，遇到了许多需要用到多界面传值的地方，这篇博客来总结一下比较常用的五种多界面传值的方式。属性传值属性传值一般用前一个界面向后一个界面传值，简单地说就是通过访问后一个视图控制器的属性来为它赋值，通过这个属性来做到从前一个界面向后一个界面传值。首先在后一个界面中定义属性@interfaceBViewController:UIViewController@propertyNSSt
一百九十四章. 自相矛盾巨木擎天
唉！就这么一夜，林子感觉就像过了很多天似的，先是回了阳间家里，遇到了那么多不可思议的事情儿。特别是小伙伴们，第二次与自己见面时，僵硬的表情和恐怖的气氛，让自己如坐针毡，打从心眼里难受！还有东子，他现在还好吗？有没有被人欺负？护城河里的小鱼小虾们，还都在吗？水不会真的干枯了吧？那对相亲相爱漂亮的太平鸟儿，还好吧！春天了，到了做窝、下蛋、喂养小鸟宝宝的时候了，希望它们都能够平安啊！虽然没有看见家人，也
UI学习——cell的复用和自定义cell Magnetic_h ui 学习
目录cell的复用手动（非注册）自动（注册）自定义cellcell的复用在iOS开发中，单元格复用是一种提高表格（UITableView）和集合视图（UICollectionView）滚动性能的技术。当一个UITableViewCell或UICollectionViewCell首次需要显示时，如果没有可复用的单元格，则视图会创建一个新的单元格。一旦这个单元格滚动出屏幕，它就不会被销毁。相反，它被添
element实现动态路由+面包屑软件技术NINI vue案例 vue.js 前端
el-breadcrumb是ElementUI组件库中的一个面包屑导航组件，它用于显示当前页面的路径，帮助用户快速理解和导航到应用的各个部分。在Vue.js项目中，如果你已经安装了ElementUI，就可以很方便地使用el-breadcrumb组件。以下是一个基本的使用示例：安装ElementUI（如果你还没有安装的话）:你可以通过npm或yarn来安装ElementUI。bash复制代码npmi
10月|愿你的青春不负梦想-读书笔记-01 Tracy的小书斋
本书的作者是俞敏洪，大家都很熟悉他了吧。俞敏洪老师是我行业的领头羊吧，也是我事业上的偶像。本日摘录他书中第一章中的金句：『一个人如果什么目标都没有，就会浑浑噩噩，感觉生命中缺少能量。能给我们能量的，是对未来的期待。第一件事，我始终为了进步而努力。与其追寻全世界的骏马，不如种植丰美的草原，到时骏马自然会来。第二件事，我始终有阶段性的目标。什么东西能给我能量？答案是对未来的期待。』读到这里的时候，我便
C语言宏函数南林yan C语言 c语言
一、什么是宏函数？通过宏定义的函数是宏函数。如下，编译器在预处理阶段会将Add(x,y)替换为((x)*(y))#defineAdd(x,y)((x)*(y))#defineAdd(x,y)((x)*(y))intmain(){inta=10;intb=20;intd=10;intc=Add(a+d,b)*2;cout<
地推话术，如何应对地推过程中家长的拒绝校师学
相信校长们在做地推的时候经常遇到这种情况：市场专员反馈家长不接单，咨询师反馈难以邀约这些家长上门，校区地推疲软，招生难。为什么？仅从地推层面分析，一方面因为家长受到的信息轰炸越来越多，对信息越来越“免疫”；而另一方面地推人员的专业能力和营销话术没有提高，无法应对家长的拒绝，对有意向的家长也不知如何跟进，眼睁睁看着家长走远；对于家长的疑问，更不知道如何有技巧地回答，机会白白流失。由于回答没技巧和专业
谢谢你们，爱你们！鹿游儿
昨天家人去泡温泉，二个孩子也带着去，出发前一晚，匆匆下班，赶回家和孩子一起收拾。饭后，我拿出笔和本子（上次去澳门时做手帐的本子）写下了1\2\3\4\5\6\7\8\9,让后让小壹去思考，带什么出发去旅游呢？她在对应的数字旁边画上了，泳衣、泳圈、肖恩、内衣内裤、tapuy、拖鞋……画完后，就让她自己对着这个本子，将要带的，一一带上，没想到这次带的书还是这本《便便工厂》(晚上姑婆发照片过来，妹妹累得
C语言如何定义宏函数？小九格物 c语言
在C语言中，宏函数是通过预处理器定义的，它在编译之前替换代码中的宏调用。宏函数可以模拟函数的行为，但它们不是真正的函数，因为它们在编译时不会进行类型检查，也不会分配存储空间。宏函数的定义通常使用#define指令，后面跟着宏的名称和参数列表，以及宏展开后的代码。宏函数的定义方式：1.基本宏函数：这是最简单的宏函数形式，它直接定义一个表达式。#defineSQUARE(x)((x)*(x))2.带参
微服务下功能权限与数据权限的设计与实现 nbsaas-boot 微服务 java 架构
在微服务架构下，系统的功能权限和数据权限控制显得尤为重要。随着系统规模的扩大和微服务数量的增加，如何保证不同用户和服务之间的访问权限准确、细粒度地控制，成为设计安全策略的关键。本文将讨论如何在微服务体系中设计和实现功能权限与数据权限控制。1.功能权限与数据权限的定义功能权限：指用户或系统角色对特定功能的访问权限。通常是某个用户角色能否执行某个操作，比如查看订单、创建订单、修改用户资料等。数据权限：
理解Gunicorn：Python WSGI服务器的基石范范0825 ipython linux 运维
理解Gunicorn：PythonWSGI服务器的基石介绍Gunicorn，全称GreenUnicorn，是一个为PythonWSGI（WebServerGatewayInterface）应用设计的高效、轻量级HTTP服务器。作为PythonWeb应用部署的常用工具，Gunicorn以其高性能和易用性著称。本文将介绍Gunicorn的基本概念、安装和配置，帮助初学者快速上手。1.什么是Gunico
小丽成长记（四十三）玲玲54321
小丽发现，即使她好不容易调整好自己的心态下一秒总会有不确定的伤脑筋的事出现，一个接一个的问题，人生就没有停下的时候，小问题不断出现。不过她今天看的书，她接受了人生就是不确定的，厉害的人就是不断创造确定性，在Ta的领域比别人多的确定性就能让自己脱颖而出，显示价值从而获得的比别人多的利益。正是这样的原因，因为从前修炼自己太少，使得她现在在人生道路上打怪起来困难重重，她似乎永远摆脱不了那种无力感，有种习
学点心理知识，呵护孩子健康静候花开_7090
昨天听了华中师范大学教育管理学系副教授张玲老师的《哪里才是学生心理健康的最后庇护所，超越教育与技术的思考》的讲座。今天又重新学习了一遍，收获匪浅。张玲博士也注意到了当今社会上的孩子由于心理问题导致的自残、自杀及伤害他人等恶性事件。她向我们普及了一个重要的命题，她说心理健康的一些基本命题，我们与我们通常的一些教育命题是不同的，她还举了几个例子，让我们明白我们原来以为的健康并非心理学上的健康。比如如果
2021年12月19日，春蕾教育集团团建活动感受——黄晓丹黄错错加油
感受:1.从陌生到熟悉的过程。游戏环节让我们在轻松的氛围中得到了锻炼，也增长了不少知识。2.游戏过程中，我们贡献的是个人力量，展现的是团队的力量。它磨合的往往不止是工作的熟悉，更是观念上契合度的贴近。3.这和工作是一样的道理。在各自的岗位上，每个人摆正自己的位置、各司其职充分发挥才能，并团结一致劲往一处使，才能实现最大的成功。新知:1.团队精神需要不断地创新。过去，人们把创新看作是冒风险，现在人们
Cell Insight | 单细胞测序技术又一新发现，可用于HIV-1和Mtb共感染个体诊断尐尐呅
结核病是艾滋病合并其他疾病中导致患者死亡的主要原因。其中结核病由结核分枝杆菌（Mycobacteriumtuberculosis,Mtb）感染引起，获得性免疫缺陷综合症（艾滋病）由人免疫缺陷病毒（Humanimmunodeficiencyvirustype1,HIV-1）感染引起。国家感染性疾病临床医学研究中心/深圳市第三人民医院张国良团队携手深圳华大生命科学研究院吴靓团队，共同研究得出单细胞测序
c++ 的iostream 和 c++的stdio的区别和联系黄卷青灯77 c++算法开发语言 iostream stdio
在C++中，iostream和C语言的stdio.h都是用于处理输入输出的库，但它们在设计、用法和功能上有许多不同。以下是两者的区别和联系：区别1.编程风格iostream（C++风格）：C++标准库中的输入输出流类库，支持面向对象的输入输出操作。典型用法是cin（输入）和cout（输出），使用>操作符来处理数据。更加类型安全，支持用户自定义类型的输入输出。#includeintmain(){in
瑶池防线谜影梦蝶
冥华虽然逃过了影梦的军队，但他是一个忠臣，他选择上报战况。败给影梦后成逃兵，高层亡尔还活着，七重天失守......随便一条，即可处死冥华。冥华自然是知道以仙界高层的习性此信一发自己必死无疑，但他还选择上报实情，因为责任。同样此信送到仙宫后，知道此事的人，大多数人都认定冥华要完了，所以上到仙界高层，下到扫大街的，包括冥华自己，全都准备好迎接冥华之死。如果仙界现在还属于两方之争的话，冥华必死无疑。然而
爬山后遗症璃绛
爬山，攀登，一步一步走向制高点，是一种挑战。成功抵达是一种无法言语的快乐，在山顶吹吹风，看看风景，这是从未有过的体验。然而，爬山一时爽，下山腿打颤，颠簸的路，一路向下走，腿部力量不够，走起来抖到不行，停不下来了！第二天必定腿疼，浑身酸痛，坐立难安！
java责任链模式 3213213333332132 java 责任链模式村民告县长
责任链模式，通常就是一个请求从最低级开始往上层层的请求，当在某一层满足条件时，请求将被处理，当请求到最高层仍未满足时，则请求不会被处理。就是一个请求在这个链条的责任范围内，会被相应的处理，如果超出链条的责任范围外，请求不会被相应的处理。下面代码模拟这样的效果：创建一个政府抽象类,方便所有的具体政府部门继承它。 package 责任链模式; /** *
linux、mysql、nginx、tomcat 性能参数优化 ronin47
一、linux 系统内核参数 /etc/sysctl.conf文件常用参数 net.core.netdev_max_backlog = 32768 #允许送到队列的数据包的最大数目 net.core.rmem_max = 8388608 #SOCKET读缓存区大小 net.core.wmem_max = 8388608 #SOCKET写缓存区大
php命令行界面 dcj3sjt126com PHP cli
常用选项 php -v php -i PHP安装的有关信息 php -h 访问帮助文件 php -m 列出编译到当前PHP安装的所有模块执行一段代码 php -r 'echo "hello, world!";' php -r 'echo "Hello, World!\n";' php -r '$ts = filemtime("
Filter&Session 171815164 session
Filter HttpServletRequest requ = (HttpServletRequest) req; HttpSession session = requ.getSession(); if (session.getAttribute("admin") == null) { PrintWriter out = res.ge
连接池与Spring,Hibernate结合 g21121 Hibernate
前几篇关于Java连接池的介绍都是基于Java应用的，而我们常用的场景是与Spring和ORM框架结合，下面就利用实例学习一下这方面的配置。 1.下载相关内容： &nb
[简单]mybatis判断数字类型 53873039oycg mybatis
昨天同事反馈mybatis保存不了int类型的属性,一直报错，错误信息如下: Caused by: java.lang.NumberFormatException: For input string: "null" at sun.mis
项目启动时或者启动后ava.lang.OutOfMemoryError: PermGen space 程序员是怎么炼成的 eclipse jvm tomcat catalina.sh eclipse.ini
在启动比较大的项目时，因为存在大量的jsp页面，所以在编译的时候会生成很多的.class文件，.class文件是都会被加载到jvm的方法区中，如果要加载的class文件很多，就会出现方法区溢出异常 java.lang.OutOfMemoryError: PermGen space. 解决办法是点击eclipse里的tomcat，在
我的crm小结 aijuans crm
各种原因吧，crm今天才完了。主要是接触了几个新技术： Struts2、poi、ibatis这几个都是以前的项目中用过的。 Jsf、tapestry是这次新接触的，都是界面层的框架，用起来也不难。思路和struts不太一样，传说比较简单方便。不过个人感觉还是struts用着顺手啊，当然springmvc也很顺手，不知道是因为习惯还是什么。jsf和tapestry应用的时候需要知道他们的标签、主
spring里配置使用hibernate的二级缓存几步 antonyup_2006 java spring Hibernate xml cache
．在spring的配置文件中 applicationContent.xml，hibernate部分加入 xml 代码 <prop key="hibernate.cache.provider_class">org.hibernate.cache.EhCacheProvider</prop> <prop key="hi
JAVA基础面试题百合不是茶抽象实现接口 String类接口继承抽象类继承实体类自定义异常
/* * 栈（stack）：主要保存基本类型（或者叫内置类型）（char、byte、short、 *int、long、 float、double、boolean）和对象的引用，数据可以共享，速度仅次于 * 寄存器（register），快于堆。堆（heap）：用于存储对象。 */ &
让sqlmap文件 "继承" 起来 bijian1013 java ibatis sqlmap
多个项目中使用ibatis , 和数据库表对应的 sqlmap文件（增删改查等基本语句)，dao, pojo 都是由工具自动生成的, 现在将这些自动生成的文件放在一个单独的工程中，其它项目工程中通过jar包来引用，并通过"继承"为基础的sqlmap文件，dao,pojo 添加新的方法来满足项
精通Oracle10编程SQL(13)开发触发器 bijian1013 oracle 数据库 plsql
/* *开发触发器 */ --得到日期是周几 select to_char(sysdate+4,'DY','nls_date_language=AMERICAN') from dual; select to_char(sysdate,'DY','nls_date_language=AMERICAN') from dual; --建立BEFORE语句触发器 CREATE O
【EhCache三】EhCache查询 bit1129 ehcache
本文介绍EhCache查询缓存中数据，EhCache提供了类似Hibernate的查询API，可以按照给定的条件进行查询。要对EhCache进行查询，需要在ehcache.xml中设定要查询的属性数据准备 @Before public void setUp() { //加载EhCache配置文件 Inpu
CXF框架入门实例白糖_ spring Web 框架 webservice servlet
CXF是apache旗下的开源框架，由Celtix + XFire这两门经典的框架合成，是一套非常流行的web service框架。它提供了JAX-WS的全面支持，并且可以根据实际项目的需要，采用代码优先（Code First）或者 WSDL 优先（WSDL First）来轻松地实现 Web Services 的发布和使用，同时它能与spring进行完美结合。在apache cxf官网提供
angular.equals boyitech AngularJS AngularJS API AnguarJS 中文API angular.equals
angular.equals 描述: 比较两个值或者两个对象是不是相等。还支持值的类型，正则表达式和数组的比较。两个值或对象被认为是相等的前提条件是以下的情况至少能满足一项：两个值或者对象能通过=== （恒等）的比较两个值或者对象是同样类型，并且他们的属性都能通过angular
java-腾讯暑期实习生-输入一个数组A[1,2,...n]，求输入B，使得数组B中的第i个数字B[i]=A[0]*A[1]*...*A[i-1]*A[i+1] bylijinnan java
这道题的具体思路请参看何海涛的微博：http://weibo.com/zhedahht import java.math.BigInteger; import java.util.Arrays; public class CreateBFromATencent { /** * 题目：输入一个数组A[1,2,...n]，求输入B，使得数组B中的第i个数字B[i]=A
FastDFS 的安装和配置修订版 Chen.H linux fastDFS 分布式文件系统
FastDFS Home:http://code.google.com/p/fastdfs/ 1. 安装 http://code.google.com/p/fastdfs/wiki/Setup http://hi.baidu.com/leolance/blog/item/3c273327978ae55f93580703.html 安装libevent (对libevent的版本要求为1.4.
[强人工智能]拓扑扫描与自适应构造器 comsci 人工智能
当我们面对一个有限拓扑网络的时候,在对已知的拓扑结构进行分析之后,发现在连通点之后,还存在若干个子网络,且这些网络的结构是未知的,数据库中并未存在这些网络的拓扑结构数据....这个时候,我们该怎么办呢? 那么,现在我们必须设计新的模块和代码包来处理上面的问题
oracle merge into的用法 daizj oracle sql merget into
Oracle中merge into的使用 http://blog.csdn.net/yuzhic/article/details/1896878 http://blog.csdn.net/macle2010/article/details/5980965 该命令使用一条语句从一个或者多个数据源中完成对表的更新和插入数据. ORACLE 9i 中，使用此命令必须同时指定UPDATE 和INSE
不适合使用Hadoop的场景 datamachine hadoop
转自：http://dev.yesky.com/296/35381296.shtml。　　Hadoop通常被认定是能够帮助你解决所有问题的唯一方案。当人们提到“大数据”或是“数据分析”等相关问题的时候，会听到脱口而出的回答：Hadoop! 实际上Hadoop被设计和建造出来，是用来解决一系列特定问题的。对某些问题来说，Hadoop至多算是一个不好的选择，对另一些问题来说，选择Ha
YII findAll的用法 dcj3sjt126com yii
看文档比较糊涂，其实挺简单的： $predictions=Prediction::model()->findAll("uid=:uid",array(":uid"=>10)); 第一个参数是选择条件：”uid=10″。其中:uid是一个占位符，在后面的array(“:uid”=>10)对齐进行了赋值；更完善的查询需要
vim 常用 NERDTree 快捷键 dcj3sjt126com vim
下面给大家整理了一些vim NERDTree的常用快捷键了，这里几乎包括了所有的快捷键了，希望文章对各位会带来帮助。切换工作台和目录 ctrl + w + h 光标 focus 左侧树形目录ctrl + w + l 光标 focus 右侧文件显示窗口ctrl + w + w 光标自动在左右侧窗口切换ctrl + w + r 移动当前窗口的布局位置 o 在已有窗口中打开文件、目录或书签，并跳
Java把目录下的文件打印出来蕃薯耀列出目录下的文件文件夹下面的文件目录下的文件
Java把目录下的文件打印出来 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 蕃薯耀 2015年7月11日 11:02:
linux远程桌面----VNCServer与rdesktop hanqunfeng Desktop
windows远程桌面到linux，需要在linux上安装vncserver，并开启vnc服务，同时需要在windows下使用vnc-viewer访问Linux。vncserver同时支持linux远程桌面到linux。 linux远程桌面到windows，需要在linux上安装rdesktop，同时开启windows的远程桌面访问。下面分别介绍，以windo
guava中的join和split功能 jackyrong java
guava库中，包含了很好的join和split的功能，例子如下： 1）将LIST转换为使用字符串连接的字符串 List<String> names = Lists.newArrayList("John", "Jane", "Adam", "Tom");
Web开发技术十年发展历程 lampcy android Web 浏览器 html5
回顾web开发技术这十年发展历程： Ajax 03年的时候我上六年级，那时候网吧刚在小县城的角落萌生。传奇，大话西游第一代网游一时风靡。我抱着试一试的心态给了网吧老板两块钱想申请个号玩玩，然后接下来的一个小时我一直在，注，册，账，号。彼时网吧用的512k的带宽，注册的时候，填了一堆信息，提交，页面跳转，嘣，”您填写的信息有误，请重填”。然后跳转回注册页面，以此循环。我现在时常想，如果当时a
架构师之mima-----------------mina的非NIO控制IOBuffer(说得比较好) nannan408 buffer
1.前言。如题。 2.代码。 IoService IoService是一个接口，有两种实现：IoAcceptor和IoConnector；其中IoAcceptor是针对Server端的实现，IoConnector是针对Client端的实现；IoService的职责包括： 1、监听器管理 2、IoHandler 3、IoSession
ORA-00054:resource busy and acquire with NOWAIT specified Everyday都不同 oracle session Lock
[Oracle] 今天对一个数据量很大的表进行操作时，出现如题所示的异常。此时表明数据库的事务处于“忙”的状态，而且被lock了，所以必须先关闭占用的session。 step1，查看被lock的session： select t2.username, t2.sid, t2.serial#, t2.logon_time from v$locked_obj
javascript学习笔记 tntxia JavaScript
javascript里面有6种基本类型的值:number、string、boolean、object、function和undefined。number：就是数字值，包括整数、小数、NaN、正负无穷。string:字符串类型、单双引号引起来的内容。boolean:true、false object:表示所有的javascript对象，不用多说function:我们熟悉的方法，也就是
Java enum的用法详解 xieke90 enum 枚举
Java中枚举实现的分析：示例： public static enum SEVERITY{ INFO,WARN,ERROR } enum很像特殊的class，实际上enum声明定义的类型就是一个类。而这些类都是类库中Enum类的子类 (java.l