[root@master ~]# yum -y install docker-ce
[root@master ~]# systemctl enable --now docker
Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /usr/lib/systemd/system/docker.service.
[root@master ~]# docker --version
Docker version 20.10.12, build e91ed57
[root@master ~]# ls /etc/docker/
key.json
//镜像加速
[root@master ~]# cat > /etc/docker/daemon.json << EOF
{
“registry-mirrors”: [“https://b9pmyelo.mirror.aliyuncs.com”],
“exec-opts”: [“native.cgroupdriver=systemd”],
“log-driver”: “json-file”,
“log-opts”: {
“max-size”: “100m”
},
“storage-driver”: “overlay2”
}
EOF
[root@master ~]# cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
[root@master ~]# yum clean all && yum makecache
//安装kubeadm,kubelet和kubectl,由于版本更新频繁,这里指定版本号部署
[root@master ~]# yum install -y kubelet-1.20.0 kubeadm-1.20.0 kubectl-1.20.0
[root@master ~]# systemctl enable kubelet
Created symlink /etc/systemd/system/multi-user.target.wants/kubelet.service → /usr/lib/systemd/system/kubelet.service.
[root@master ~]# systemctl status kubelet
● kubelet.service - kubelet: The Kubernetes Node Agent
Loaded: loaded (/usr/lib/systemd/system/kubelet.service; enabled; vendor preset: disabled)
Drop-In: /usr/lib/systemd/system/kubelet.service.d
└─10-kubeadm.conf
Active: inactive (dead)
Docs: https://kubernetes.io/docs/
[](()部署Kubernetes Master
[root@master ~]# kubeadm init --apiserver-advertise-address 192.168.129.250 --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.20.0 --service-cidr 10.96.0.0/12 --pod-network-cidr 10.244.0.0/16
[init] Using Kubernetes version: v1.20.0
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected “cgroupfs” as the Docker cgroup driver. The recommended driver is “systemd”. Please follow the guide at https://kubernetes.io/docs/setup/cri/
[WARNING FileExisting-tc]: tc not found in system path
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.12. Latest validated version: 19.03
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using ‘kubeadm config images pull’
[certs] Using certificateDir folder “/etc/kubernetes/pki”
[certs] Generating “ca” certificate and key
[certs] Generating “apiserver” certificate and key
[certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local master] and IPs [10.96.0.1 192.168.129.250]
[certs] Generating “apiserver-kubelet-client” certificate and key
[certs] Generating “front-proxy-ca” certificate and key
[certs] Generating “front-proxy-client” certificate and key
[certs] Generating “etcd/ca” certificate and key
[certs] Generating “etcd/server” certificate and key
[certs] etcd/server serving cert is signed for DNS names [localhost master] and IPs [192.168.129.250 127.0.0.1 ::1]
[certs] Generating “etcd/peer” certificate and key
[certs] etcd/peer serving cert is signed for DNS names [localhost master] and IPs [192.168.129.250 127.0.0.1 ::1]
[certs] Generating “etcd/healthcheck-client” certificate and key
[certs] Generating “apiserver-etcd-client” certificate and key
[certs] Generating “sa” key and public key
[kubeconfig] Using kubeconfig folder “/etc/kubernetes”
[kubeconfig] Writing “admin.conf” kubeconfig file
[kubeconfig] Writing “kubelet.conf” kubeconfig file
[kubeconfig] Writing “controller-manager.conf” kubeconfig file
[kubeconfig] Writing “scheduler.conf” kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file “/var/lib/kubelet/kubeadm-flags.env”
[kubelet-start] Writing kubelet configuration to file “/var/lib/kubelet/config.yaml”
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder “/etc/kubernetes/manifests”
[control-plane] Creating static Pod manifest for “kube-apiserver”
[control-plane] Creating static Pod manifest for “kube-controller-manager”
[control-plane] Creating static Pod manifest for “kube-scheduler”
[etcd] Creating static Pod manifest for local etcd in “/etc/kubernetes/manifests”
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory “/etc/kubernetes/manifests”. This can take up to 4m0s
[apiclient] All control plane components are healthy after 8.506240 seconds
[upload-config] Storing the configuration used in ConfigMap “kubeadm-config” in the “kube-system” Namespace
[kubelet] Creating a ConfigMap “kubelet-config-1.20” in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node master as control-plane by adding the labels “node-role.kubernetes.io/master=‘’” and “node-role.kubernetes.io/control-plane=‘’ (deprecated)”
[mark-control-plane] Marking the node master as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: akxmi3.rtm7hjgs7n9trljm
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the “cluster-info” ConfigMap in the “kube-public” namespace
[kubelet-finalize] Updating “/etc/kubernetes/kubelet.conf” to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown ( i d − u ) : (id -u): (id−u):(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run “kubectl apply -f [podnetwork].yaml” with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
#下面的命令写到文件保存起来
kubeadm join 192.168.129.250:6443 --token hglo7o.0ya3tbi82wqdjif4 \
–discovery-token-ca-cert-hash sha256:f6be891c6cd273a9283a6c05ca795811f7350afa2b5072990a294b7070ff9a4f
//把那条命令写入到文件中保存起来(以防万一)
[root@master ~]# vim init
kubeadm join 192.168.129.250:6443 --token hglo7o.0ya3tbi82wqdjif4 \
–discovery-token-ca-cert-hash sha256:f6be891c6cd273a9283a6c05ca795811f7350afa2b5072990a294b7070ff9a4f
[root@master ~]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
registry.aliyuncs.com/google_containers/kube-proxy v1.20.0 10cc881966cf 12 months ago 118MB
registry.aliyuncs.com/google_containers/kube-scheduler v1.20.0 3138b6e3d471 12 months ago 46.4MB
registry.aliyuncs.com/google_containers/kube-apiserver v1.20.0 ca9843d3b545 12 months ago 122MB
registry.aliyuncs.com/google_containers/kube-controller-manager v1.20.0 b9fa1895dcaa 12 months ago 116MB
registry.aliyuncs.com/google_containers/etcd 3.4.13-0 0369cf4303ff 15 months ago 253MB
registry.aliyuncs.com/google_containers/coredns 1.7.0 bfe3a36ebd25 18 months ago 45.2MB
registry.aliyuncs.com/google_containers/pause 3.2 80d28bedfe5d 22 months ago 683kB
//设置环境变量
[root@master ~]# echo ‘export KUBECONFIG=/etc/kubernetes/admin.conf’ > /etc/profile.d/k8s.sh
[root@master ~]# source /etc/profile.d/k8s.sh
[root@master ~]# echo $KUBECONFIG
/etc/kubernetes/admin.conf
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master Ready control-plane,master 76m v1.20.0 #要Ready(时间会有点长)
[](()安装Pod网络插件(CNI)
[root@master ~]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
The connection to the server raw.githubusercontent.com was refused - did you specify the right host or port? #出现此报错
//解决方案
[root@master ~]# cat /etc/hosts //添加如下内容
199.232.96.133 raw.githubusercontent.com
[root@master ~]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
确保能访问到这个网站
[quay.io](()
[](()加入Kubernetes Node
在node1与node2节点上执行
向集群添加新节点,执行在kubeadm init输出的kubeadm join命令:
//这里执行的就是我们刚才保存的init文件里面的内容
[root@node1 ~]# kubeadm join 192.168.129.250:6443 --token hglo7o.0ya3tbi82wqdjif4 --discovery-token-ca-cert-hash sha256:f6be891c6cd273a9283a6c05ca795811f7350afa2b5072990a294b7070ff9a4f
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected “cgroupfs” as the Docker cgroup driver. The recommended driver is “systemd”. Please follow the guide at https://kubernetes.io/docs/setup/cri/
[WARNING FileExisting-tc]: tc not found in system path
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.12. Latest validated version: 19.03
[WARNING Hostname]: hostname “node1” could not be reached
[WARNING Hostname]: hostname “node1”: lookup node1 on 192.168.129.2:53: no such host
[preflight] Reading configuration from the cluster…
[preflight] FYI: You can look at this config file with ‘kubectl -n kube-system get cm kubeadm-config -o yaml’
[kubelet-start] Writing kubelet configuration to file “/var/lib/kubelet/config.yaml”
[kubelet-start] Writing kubelet environment file with flags to file “/var/lib/kubelet/kubeadm-flags.env”
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap…
This node has joined the cluster:
Certificate signing request was sent to apiserver and a response was received.
The Kubelet was informed of the new secure connection details.
Run ‘kubectl get nodes’ on the control-plane to see this node join the cluster.
// 在node2上执行
[root@node2 ~]# kubeadm join 192.168.129.250:6443 --token hglo7o.0ya3tbi82wqdjif4 --discovery-token-ca-cert-hash sha256:f6be891c6cd273a9283a6c05ca795811f7350afa2b5072990a294b7070ff9a4f
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected “cgroupfs” as the Docker cgroup driver. The recommended driver is “systemd”. Please follow the guide at https://kubernetes.io/docs/setup/cri/
[WARNING FileExisting-tc]: tc not found in system path
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.12. Latest validated version: 19.03
[WARNING Hostname]: hostname “node2” could not be reached
[WARNING Hostname]: hostname “node2”: lookup node2 on 114.114.114.114:53: no such host
[preflight] Reading configuration from the cluster…
[preflight] FYI: You can look at this config file with ‘kubectl -n kube-system get cm kubeadm-config -o yaml’
[kubelet-start] Writing kubelet configuration to file “/var/lib/kubelet/config.yaml”
[kubelet-start] Writing kubelet environment file with flags to file “/var/lib/kubelet/kubeadm-flags.env”
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap…
This node has joined the cluster:
Certificate signing request was sent to apiserver and a response was received.
The Kubelet was informed of the new secure connection details.
Run ‘kubectl get nodes’ on the control-plane to see this node join the cluster.
[](()测试kubernetes集群
// 查看节点的状态
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master Ready control-plane,master 80m v1.20.0
node1 NotReady 69s v1.20.0 #等待状态变为Ready
node2 NotReady 52s v1.20.0 #等待状态变为Ready
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master Ready control-plane,master 86m v1.20.0
node1 Ready 6m17s v1.20.0
node2 Ready 6m v1.20.0
[root@master ~]# kubectl get ns
NAME STATUS AGE
default Active 89m
kube-node-lease Active 89m
kube-public Active 89m
kube-system Active 89m
[root@master ~]# kubectl get pods -n kube-system -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
coredns-7f89b7bc75-qjjmz 1/1 Running 0 91m 10.244.0.3 master
coredns-7f89b7bc75-rvcdl 1/1 Running 0 91m 10.244.0.2 《一线大厂Java面试题解析+后端开发学习笔记+最新架构讲解视频+实战项目源码讲义》无偿开源 威信搜索公众号【编程进阶路】 master
etcd-master 1/1 Running 0 91m 192.168.129.250 master
kube-apiserver-master 1/1 Running 0 91m 192.168.129.250 master
kube-controller-manager-master 1/1 Running 0 91m 192.168.129.250 master
kube-flannel-ds-7stlz 1/1 Running 0 12m 192.168.129.135 node1
kube-flannel-ds-7xthp 1/1 Running 0 58m 192.168.129.250 master
kube-flannel-ds-mzw2x 1/1 Running 0 11m 192.168.129.136 node2
kube-proxy-b8qnc 1/1 Running 0 91m 192.168.129.250 master
kube-proxy-gr294 1/1 Running 0 12m 192.168.129.135 node1
kube-proxy-mtgnd 1/1 Running 0 11m 192.168.129.136 node2
kube-scheduler-master 1/1 Running 0 91m 192.168.129.250 master
[root@master ~]# kubectl create deployment nginx --image=nginx //运行一个nginx的pod
deployment.apps/nginx created
[root@master ~]# kubectl expose deployment nginx --port=80 --type=NodePort //映射80端口
service/nginx exposed
[root@master ~]# kubectl get pods,svc
NAME READY STATUS RESTARTS AGE
pod/nginx-6799fc88d8-8hwr2 0/1 ContainerCreating 0 33s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kubernetes ClusterIP 10.96.0.1 443/TCP 87m
service/nginx NodePort 10.111.93.135 80:30274/TCP 24s
[root@master ~]# curl http://10.111.93.135