parted是一个磁盘分区管理工具
需求:
现有一个做了raid5的硬盘 要求分三个去
硬盘总分区大小 6.2T
/data0 4.8T
/data1 1T
4G (无需格式化 做DRBD+Hearbeat+MySQL用)
parted /dev/sdb mklabel gpt #<==修改分区格式为gpt。
parted /dev/sdb mkpart primary 0 4800000 #<==创建一个4.8T主分区
parted /dev/sdb mkpart primary 4800001 5800001 #<==创建一个1T主分区
parted /dev/sdb mkpart primary 5800002 5804098 #<==创建一个4G主分区
parted /dev/sdb p
[root@oldboyedu ~]# parted /dev/sdb #交互式开始分区
GNU Parted 3.1
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) help
(parted) mklabel gpt #修改分区格式为gpt
Warning: The existing disk label on /dev/sdb will be destroyed and all data on this disk will be lost. Do you want to
continue?
Yes/No? Yes
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt #修改结果
(parted) mkpart primary 0 480 #创建第一个主分区480M。
Warning: The resulting partition is not properly aligned for best performance.
Ignore/Cancel? Ignore #忽略提示。
(parted) mkpart primary 481 580 #创建第二个主分区100M。
Warning: You requested a partition from 481MB to 580MB (sectors 939453..1132812).
The closest location we can manage is 481MB to 481MB (sectors 940031..940031).
Is this still acceptable to you?
Yes/No? Y
Warning: The resulting partition is not properly aligned for best performance.
Ignore/Cancel? I #忽略提示。
(parted) mkpart logic 581 600 #创建一个20M逻辑分区。
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 17.4kB 480MB 480MB primary
3 481MB 481MB 512B primary
2 481MB 580MB 98.6MB primary
4 581MB 600MB 18.9MB logic
(parted) rm 4 #删除
(parted) p
分区被parted搞了。
修改分区格式：
(parted) mklabel msdos
Warning: The existing disk label on /dev/sdb will be destroyed and all data on this disk will be lost. Do you want to
continue?
Yes/No? Y
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
创建分区：
[root@oldboyedu ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-2097151, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-2097151, default 2097151): +100M
Partition 1 of type Linux and of size 100 MiB is set
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000006b6
Device Boot Start End Blocks Id System
/dev/sdb1 2048 206847 102400 83 Linux
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (206848-2097151, default 206848):
Using default value 206848
Last sector, +sectors or +size{K,M,G} (206848-2097151, default 2097151): +100M
Partition 2 of type Linux and of size 100 MiB is set
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000006b6
Device Boot Start End Blocks Id System
/dev/sdb1 2048 206847 102400 83 Linux
/dev/sdb2 206848 411647 102400 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@oldboyedu ~]# ls -l /dev/sdb*
brw-rw---- 1 root disk 8, 16 Mar 29 11:31 /dev/sdb
brw-rw---- 1 root disk 8, 17 Mar 29 11:31 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Mar 29 11:31 /dev/sdb2
[root@oldboyedu ~]# mkfs -t ext4 /dev/sdb1 #格式化ext4文件系统 mkfs.ext4
其实关键就是生成一定数量的Inode和Block。
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
25688 inodes, 102400 blocks
5120 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=33685504
13 block groups
8192 blocks per group, 8192 fragments per group
1976 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
挂载： 开门、开窗住人使用
[root@oldboyedu ~]# mount /dev/sdb1 /mnt #临时挂载到/mnt
[root@oldboyedu ~]# df -h #查看挂载结果
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 19G 1.9G 18G 10% /
devtmpfs 980M 5.0M 975M 1% /dev
tmpfs 991M 0 991M 0% /dev/shm
tmpfs 991M 18M 973M 2% /run
tmpfs 991M 0 991M 0% /sys/fs/cgroup
/dev/sda1 253M 136M 118M 54% /boot
tmpfs 199M 0 199M 0% /run/user/0
tmpfs 199M 0 199M 0% /run/user/1000
/dev/sdb1 93M 1.6M 85M 2% /mnt #<====已挂载。
[root@oldboyedu ~]# cat /proc/mounts #查看挂载结果
rootfs / rootfs rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
configfs /sys/kernel/config configfs rw,relatime 0 0
/dev/sda3 / xfs rw,relatime,attr2,inode64,noquota 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=19277 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
/dev/sda1 /boot xfs rw,relatime,attr2,inode64,noquota 0 0
tmpfs /run/user/0 tmpfs rw,nosuid,nodev,relatime,size=202812k,mode=700 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=202812k,mode=700,uid=1000,gid=1000 0 0
/dev/sdb1 /mnt ext4 rw,relatime,data=ordered 0 0 #<==已挂载。
[root@oldboyedu ~]# touch /mnt/oldboy #<==测试。
[root@oldboyedu ~]# ls /mnt
lost+found oldboy
[root@oldboyedu /mnt]# umount /mnt
umount: /mnt: target is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
[root@oldboyedu /mnt]# pwd
/mnt
You have new mail in /var/spool/mail/root
[root@oldboyedu /mnt]# umount -lf /mnt #<==强制卸载
[root@oldboyedu /mnt]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 19G 1.9G 18G 10% /
devtmpfs 980M 5.0M 975M 1% /dev
tmpfs 991M 0 991M 0% /dev/shm
tmpfs 991M 18M 973M 2% /run
tmpfs 991M 0 991M 0% /sys/fs/cgroup
/dev/sda1 253M 136M 118M 54% /boot
tmpfs 199M 0 199M 0% /run/user/0
tmpfs 199M 0 199M 0% /run/user/1000
[root@oldboyedu ~]# mount /dev/sdb2 /opt #没有格式化没法挂载
mount: /dev/sdb2 is write-protected, mounting read-only
mount: unknown filesystem type '(null)'
[root@oldboyedu ~]# mkfs.xfs /dev/sdb2 #格式化xfs文件系统
meta-data=/dev/sdb2 isize=512 agcount=4, agsize=6400 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=855, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@oldboyedu ~]# mount -t xfs /dev/sdb2 /opt
You have new mail in /var/spool/mail/root
[root@oldboyedu ~]# df -h|grep opt
/dev/sdb2 97M 5.3M 92M 6% /opt
[root@oldboyedu ~]# touch /opt/oldgirl
[root@oldboyedu ~]# ls /opt
oldgirl
如何开机自动挂载？
/etc/fstab 开机自动挂载
几列？ 6列
[root@oldboyedu ~]# cat /etc/fstab
UUID=3a3a295f-88f8-456d-94dc-1a3eeb517c02 / xfs defaults 0 0
UUID=fd2e0ca7-32be-425f-86a2-85c02b9ec5ea /boot xfs defaults 0 0
UUID=79a3924b-739e-48dc-ab0c-0444b9ac6591 swap swap defaults 0 0
设备 挂载点 文件系统类型 默认挂载选项 是否备份 是否开机磁盘检查
/dev/sdb2 /opt xfs defaults 0 0
mount -t xfs /dev/sdb2 /opt
[root@oldboyedu ~]# blkid
/dev/sdb1: UUID="a45b004f-2322-4dc4-a281-2a212dd2ab79" TYPE="ext4"
/dev/sdb2: UUID="7daf8142-b641-4b60-a287-4e08dfa18611" TYPE="xfs"
/dev/sda1: UUID="fd2e0ca7-32be-425f-86a2-85c02b9ec5ea" TYPE="xfs"
/dev/sda2: UUID="79a3924b-739e-48dc-ab0c-0444b9ac6591" TYPE="swap"
/dev/sda3: UUID="3a3a295f-88f8-456d-94dc-1a3eeb517c02" TYPE="xfs"
[root@oldboyedu ~]# tail -1 /etc/fstab
/dev/sdb2 /opt xfs defaults 0 0
mount -a 可以将fstab里的信息挂载。
放入/etc/rc.local 实现自动挂载 但不推荐。
/sbin/mount -t xfs /dev/sdb2 /opt
查看：
[root@oldboyedu ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 19G 1.9G 18G 10% /
devtmpfs 980M 0 980M 0% /dev
tmpfs 991M 0 991M 0% /dev/shm
tmpfs 991M 9.6M 981M 1% /run
tmpfs 991M 0 991M 0% /sys/fs/cgroup
/dev/sdb2 97M 5.3M 92M 6% /opt
/dev/sda1 253M 136M 118M 54% /boot
tmpfs 199M 0 199M 0% /run/user/0
tmpfs 199M 0 199M 0% /run/user/1000
[root@oldboyedu ~]# df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/sda3 9960960 74572 9886388 1% /
devtmpfs 250820 390 250430 1% /dev
tmpfs 253514 1 253513 1% /dev/shm
tmpfs 253514 724 252790 1% /run
tmpfs 253514 16 253498 1% /sys/fs/cgroup
/dev/sdb2 51200 4 51196 1% /opt
/dev/sda1 131072 332 130740 1% /boot
tmpfs 253514 1 253513 1% /run/user/0
tmpfs 253514 1 253513 1% /run/user/1000
[root@oldboyedu ~]# blkid
/dev/sdb1: UUID="a45b004f-2322-4dc4-a281-2a212dd2ab79" TYPE="ext4"
/dev/sdb2: UUID="7daf8142-b641-4b60-a287-4e08dfa18611" TYPE="xfs"
/dev/sda1: UUID="fd2e0ca7-32be-425f-86a2-85c02b9ec5ea" TYPE="xfs"
/dev/sda2: UUID="79a3924b-739e-48dc-ab0c-0444b9ac6591" TYPE="swap"
/dev/sda3: UUID="3a3a295f-88f8-456d-94dc-1a3eeb517c02" TYPE="xfs"
查看文件系统内部细节：
[root@oldboyedu ~]# dumpe2fs /dev/sdb1 #查看ext文件系统内部细节
[root@oldboyedu ~]# dumpe2fs /dev/sdb1|egrep -i "size"
dumpe2fs 1.42.9 (28-Dec-2013)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent 64bit flex_bg sparse_super huge_file uninit_bg dir_nlink extra_isize
Block size: 1024
Fragment size: 1024
Group descriptor size: 64
Flex block group size: 16
Inode size: 128
Journal size: 4096k
[root@oldboyedu ~]# xfs_
xfs_admin xfs_db xfs_fsr xfs_io xfs_metadump xfs_quota
xfs_bmap xfs_estimate xfs_growfs xfs_logprint xfs_mkfile xfs_repair
xfs_copy xfs_freeze xfs_info xfs_mdrestore xfs_ncheck xfs_rtcp
[root@oldboyedu ~]# xfs_
[root@oldboyedu ~]# xfs_info /dev/sda1
meta-data=/dev/sda1 isize=512 agcount=4, agsize=16384 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0 spinodes=0
data = bsize=4096 blocks=65536, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal bsize=4096 blocks=855, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@oldboyedu ~]# fsck
fsck fsck.btrfs fsck.cramfs fsck.ext2 fsck.ext3 fsck.ext4 fsck.minix fsck.xfs
[root@oldboyedu ~]# fsck
fsck 磁盘检查和修复
1、正常的磁盘不能操作。
2、卸载挂载点在操作
[root@oldboyedu ~]# fsck -a /dev/sdb1
fsck from util-linux 2.23.2
/dev/sdb1: clean, 12/25688 files, 8896/102400 blocks
[root@oldboyedu ~]# mount /dev/sdb1 /mnt
[root@oldboyedu ~]# fsck -a /dev/sdb1
fsck from util-linux 2.23.2
/dev/sdb1 is mounted.
e2fsck: Cannot continue, aborting.
[root@oldboyedu ~]# e2fsck /dev/sdb1
e2fsck 1.42.9 (28-Dec-2013)
/dev/sdb1: clean, 12/25688 files, 8896/102400 blocks
[root@oldboyedu ~]# fsck -a /dev/sdb1
fsck from util-linux 2.23.2
/dev/sdb1: clean, 12/25688 files, 8896/102400 blocks
[root@oldboyedu ~]# xfs_repair /dev/sdb2
xfs_repair: /dev/sdb2 contains a mounted filesystem
xfs_repair: /dev/sdb2 contains a mounted and writable filesystem
fatal error -- couldn't initialize XFS library
[root@oldboyedu ~]# umount /opt
[root@oldboyedu ~]# xfs_repair /dev/sdb2
Phase 1 - find and verify superblock...
Phase 2 - using internal log
- zero log...
- scan filesystem freespace and inode maps...
- found root inode chunk
Phase 3 - for each AG...
- scan and clear agi unlinked lists...
- process known inodes and perform inode discovery...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- process newly discovered inodes...
Phase 4 - check for duplicate blocks...
- setting up duplicate extent list...
- check for inodes claiming duplicate blocks...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
Phase 5 - rebuild AG headers and trees...
- reset superblock...
Phase 6 - check inode connectivity...
- resetting contents of realtime bitmap and summary inodes
- traversing filesystem ...
- traversal finished ...
- moving disconnected inodes to lost+found ...
Phase 7 - verify and correct link counts...
done
==============================指定块大小和inode大小格式===========================================
[root@oldboyedu ~]# mkfs -t ext4 -b 4096 -I 512 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
38400 inodes, 38400 blocks
1920 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=39845888
2 block groups
32768 blocks per group, 32768 fragments per group
19200 inodes per group
Superblock backups stored on blocks:
32768
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
[root@oldboyedu ~]# dumpe2fs /dev/sdb3|egrep -i "size"
dumpe2fs 1.42.9 (28-Dec-2013)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent 64bit flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Block size: 4096
Fragment size: 4096
Group descriptor size: 64
Flex block group size: 16
Inode size: 512
Required extra isize: 28
Desired extra isize: 28
Journal size: 16M
文件删除原理
no space left on device.
swap作用，内存不够时候，用来充当内存，一般内存1.5倍。大于8G给8G
将来JAVA服务，内存泄漏。。。
swap就会占用。。。操作系统性能下降
[root@oldboyedu ~]# free -m
total used free shared buff/cache available
Mem: 1980 143 1689 9 146 1671
Swap: 767 0 767
增加swap分区 100M
[root@oldboyedu ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): p
Selected partition 4
First sector (718848-2097151, default 718848):
Using default value 718848
Last sector, +sectors or +size{K,M,G} (718848-2097151, default 2097151): +150M
Partition 4 of type Linux and of size 150 MiB is set
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000006b6
Device Boot Start End Blocks Id System
/dev/sdb1 2048 206847 102400 83 Linux
/dev/sdb2 206848 411647 102400 83 Linux
/dev/sdb3 411648 718847 153600 83 Linux
/dev/sdb4 718848 1026047 153600 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@oldboyedu ~]# partprobe /dev/sdb
[root@oldboyedu ~]# mkswap /dev/sdb4
Setting up swapspace version 1, size = 153596 KiB
no label, UUID=2d1ac352-4cc0-4727-8318-5526a3c309c2
[root@oldboyedu ~]# swapon -a /dev/sdb4
You have new mail in /var/spool/mail/root
[root@oldboyedu ~]# free -m
total used free shared buff/cache available
Mem: 1980 144 1673 19 162 1658
Swap: 917 0 917
修改分区格式:
[root@oldboyedu ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-2097151, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-2097151, default 2097151): +100M
Partition 1 of type Linux and of size 100 MiB is set
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000006b6
Device Boot Start End Blocks Id System
/dev/sdb1 2048 206847 102400 83 Linux
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (206848-2097151, default 206848):
Using default value 206848
Last sector, +sectors or +size{K,M,G} (206848-2097151, default 2097151): +100M
Partition 2 of type Linux and of size 100 MiB is set
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000006b6
Device Boot Start End Blocks Id System
/dev/sdb1 2048 206847 102400 83 Linux
/dev/sdb2 206848 411647 102400 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@oldboyedu ~]# ls -l /dev/sdb*
brw-rw---- 1 root disk 8, 16 Mar 29 11:31 /dev/sdb
brw-rw---- 1 root disk 8, 17 Mar 29 11:31 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Mar 29 11:31 /dev/sdb2
[root@oldboyedu ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): l
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx
5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data
6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility
8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt
9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access
a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary
16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT
1e Hidden W95 FAT1 80 Old Minix
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xbc9b0906
Device Boot Start End Blocks Id System
/dev/sdb1 2048 309247 153600 83 Linux
/dev/sdb2 309248 616447 153600 83 Linux
/dev/sdb3 616448 923647 153600 83 Linux
/dev/sdb4 923648 2097151 586752 5 Extended
/dev/sdb5 925696 1232895 153600 83 Linux
/dev/sdb6 1234944 1542143 153600 83 Linux
/dev/sdb7 1544192 1851391 153600 83 Linux
Command (m for help): t
Partition number (1-7, default 7): 7
Hex code (type L to list all codes): L
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx
5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data
6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility
8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt
9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access
a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary
16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT
1e Hidden W95 FAT1 80 Old Minix
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xbc9b0906
Device Boot Start End Blocks Id System
/dev/sdb1 2048 309247 153600 83 Linux
/dev/sdb2 309248 616447 153600 83 Linux
/dev/sdb3 616448 923647 153600 83 Linux
/dev/sdb4 923648 2097151 586752 5 Extended
/dev/sdb5 925696 1232895 153600 83 Linux
/dev/sdb6 1234944 1542143 153600 83 Linux
/dev/sdb7 1544192 1851391 153600 8e Linux LVM
Command (m for help):
dd if=/dev/sda of=/dev/sdc bs=512 count=10240
来源 生成文件系统 block大小 块个数
[root@oldboyedu ~]# dd if=/dev/sda of=/dev/sdc bs=512 count=10240
10240+0 records in
10240+0 records out
5242880 bytes (5.2 MB) copied, 0.0810606 s, 64.7 MB/s
[root@oldboyedu ~]# ls -l /dev/sdc
-rw-r--r-- 1 root root 5242880 Mar 29 09:55 /dev/sdc
[root@oldboyedu ~]# file /dev/sdc
/dev/sdc: x86 boot sector; partition 1: ID=0x83, active, starthead 32, startsector 2048, 524288 sectors; partition 2: ID=0x82, starthead 194, startsector 526336, 1572864 sectors; partition 3: ID=0x83, starthead 170, startsector 2099200, 39843840 sectors, code offset 0x63
[root@oldboyedu ~]# cat /proc/partitions
major minor #blocks name
8 16 1048576 sdb
8 17 153600 sdb1
8 18 153600 sdb2
8 19 153600 sdb3
8 20 1 sdb4
8 21 153600 sdb5
8 22 153600 sdb6
8 23 153600 sdb7
8 0 20971520 sda
8 1 262144 sda1
8 2 786432 sda2
8 3 19921920 sda3
11 0 1048575 sr0
[root@oldboyedu ~]# partprobe /dev/sdb
[root@oldboyedu ~]# partprobe /dev/sdb
[root@oldboyedu ~]# partprobe /dev/sdb
作业：自学：如何用一条fdisk命令回车完成上述分区。
需求：RAID5大小6T，已经装了系统了， 额外添加4块2T盘
现有一个做了RAID5的硬盘，要求分三个区，
硬盘总分区大小： 6.2T
/data0 4.8T
/data1 1T
4G （无需格式化，作DRBD+Hearbeat+MySQL高可用集群）
parted /dev/sdb mklabel gpt #<==修改分区格式为gpt。
parted /dev/sdb mkpart primary 0 4800000 #<==创建一个4.8T主分区
parted /dev/sdb mkpart primary 4800001 5800001 #<==创建一个1T主分区
parted /dev/sdb mkpart primary 5800002 5804098 #<==创建一个4G主分区
parted /dev/sdb p
=====================一键分区============================
parted /dev/sdb mklabel gpt
parted /dev/sdb mkpart primary 0 480 I
parted /dev/sdb mkpart primary 481 580 I
parted /dev/sdb p
=========================================================
[root@oldboyedu ~]# parted /dev/sdb
GNU Parted 3.1
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) help
align-check TYPE N check partition N for TYPE(min|opt) alignment
help [COMMAND] print general help, or help on COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partition table)
mkpart PART-TYPE [FS-TYPE] START END make a partition
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found
partitions, or a particular partition
quit exit program
rescue START END rescue a lost partition near START and END
resizepart NUMBER END resize partition NUMBER
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
disk_set FLAG STATE change the FLAG on selected device
disk_toggle [FLAG] toggle the state of FLAG on selected device
set NUMBER FLAG STATE change the FLAG on partition NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER
unit UNIT set the default unit to UNIT
version display the version number and copyright information of GNU Parted
(parted) mklabel gpt
Warning: The existing disk label on /dev/sdb will be destroyed and all data on this disk will be lost. Do you want to
continue?
Yes/No? Yes
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
(parted)
(parted) mkpart primary 481 580 I
(parted) mkpart primary 481 580
Warning: You requested a partition from 481MB to 580MB (sectors 939453..1132812).
The closest location we can manage is 481MB to 481MB (sectors 940031..940031).
Is this still acceptable to you?
Yes/No? yes
Warning: The resulting partition is not properly aligned for best performance.
Ignore/Cancel? I
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 17.4kB 480MB 480MB primary
3 481MB 481MB 512B primary
2 481MB 580MB 98.6MB primary
(parted) mkpart logic 581 600
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 17.4kB 480MB 480MB primary
3 481MB 481MB 512B primary
2 481MB 580MB 98.6MB primary
4 581MB 600MB 18.9MB logic
(parted) help
align-check TYPE N check partition N for TYPE(min|opt) alignment
help [COMMAND] print general help, or help on COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partition table)
mkpart PART-TYPE [FS-TYPE] START END make a partition
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found
partitions, or a particular partition
quit exit program
rescue START END rescue a lost partition near START and END
resizepart NUMBER END resize partition NUMBER
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
disk_set FLAG STATE change the FLAG on selected device
disk_toggle [FLAG] toggle the state of FLAG on selected device
set NUMBER FLAG STATE change the FLAG on partition NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER
unit UNIT set the default unit to UNIT
version display the version number and copyright information of GNU Parted
(parted) rm 4
(parted) p
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 1074MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
[root@oldboyedu ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): l
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx
5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data
6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility
8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt
9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access
a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary
16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT
1e Hidden W95 FAT1 80 Old Minix
Command (m for help): p
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xbc9b0906
Device Boot Start End Blocks Id System
/dev/sdb1 2048 309247 153600 83 Linux
/dev/sdb2 309248 616447 153600 83 Linux
/dev/sdb3 616448 923647 153600 83 Linux
/dev/sdb4 923648 2097151 586752 5 Extended
/dev/sdb5 925696 1232895 153600 83 Linux
/dev/sdb6 1234944 1542143 153600 83 Linux
/dev/sdb7 1544192 1851391 153600 83 Linux
Command (m for help): t
dd if=/dev/sda of=/dev/sdc bs=512 count=10240
来源 生成文件系统 block大小 块个数