ORACLE连接问题.TNS-12542: TNS: 地址已被占用
TNS-12542 Error When Executing Batch Jobs or in High Transaction Environment
TNS-12542 Error When Executing Batch Jobs or in High Transaction Environment
The information in this document applies to:
Oracle Net Services - Version: 8.1.7.4 to 10.1.0.0
Microsoft Windows 2000
Microsoft Windows XP (64-bit Itanium)
Microsoft Windows (32-bit)
Errors
TNS-00512 "Address already in use"
TNS-12542 TNS:address already in use
TNS-12560 "TNS:protocol adapter error"
Symptoms
TNS-12542 errors in log files when executing batch jobs or in high transaction environments. Client trace files will show
CLIENT TRACE FILE:
================
(3752) [10-JUN-2004 15:20:50:899] niotns: Calling address:
(DESCRIPTION=(SOURCE_ROUTE=OFF)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=tst81)(PORT=1526)))(CONNECT_DATA=(SID=sec)(SRVR=DEDICATED)(CID=(PROGRAM=c:windowssystem32inetsrvw3wp.exe)(HOST=SRVPDFTEST)(USER=userarchive))))
(3752) [10-JUN-2004 15:20:50:899] nscall: connecting...
(3752) [10-JUN-2004 15:20:50:899] nttgetport: port resolved to 1526
(3752) [10-JUN-2004 15:20:50:899] nttbnd2addr: looking up IP addr for host:tst81
(3752) [10-JUN-2004 15:20:50:899] nsopen: opening transport...
(3752) [10-JUN-2004 15:20:50:899] nttcnp: Validnode Table IN use; err 0x0
(3752) [10-JUN-2004 15:20:50:899] nttcni: trying to connect to socket 6628.
(3752) [10-JUN-2004 15:20:50:899] ntt2err: soc 6628 error - operation=1, ntresnt[0]=512, ntresnt[1]=48, ntresnt[2]=0
(3752) [10-JUN-2004 15:20:50:899] nserror: nsres: id=0, op=65, ns=12542,ns2=12560; nt[0]=512, nt[1]=48, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(3752) [10-JUN-2004 15:20:50:899] nsopen: unable to open transport
(3752) [10-JUN-2004 15:20:50:899] nioqper: error from nscall
(3752) [10-JUN-2004 15:20:50:899] nioqper: nr err code: 0
(3752) [10-JUN-2004 15:20:50:899] nioqper: ns main err code: 12542
(3752) [10-JUN-2004 15:20:50:899] nioqper: ns (2) err code: 12560
(3752) [10-JUN-2004 15:20:50:899] nioqper: nt main err code: 512
(3752) [10-JUN-2004 15:20:50:899] nioqper: nt (2) err code: 48
(3752) [10-JUN-2004 15:20:50:899] nioqper: nt OS err code: 0
(3752) [10-JUN-2004 15:20:50:899] niqme: reporting NS-12542 error as ORA-12542
(3752) [10-JUN-2004 15:20:50:899] niomapnserror: returning error 12542
(3752) [10-JUN-2004 15:20:50:899] niotns: Couldn't connect, returning 12542
(432) [10-JUN-2004 15:20:50:899] nstimarmed: no timer allocated
SQLNET.LOG file:
=============
Fatal NI connect error 12542, connecting to:
(DESCRIPTION=(SOURCE_ROUTE=OFF)(ADDRESS=(PROTOCOL=TCP)(HOST=tst81)(PORT=1526))(CONNECT_DATA=(SID=sec)(SRVR=DEDICATED)(CID=(PROGRAM=c:windowssystem32inetsrvw
3wp.exe)(HOST=SRVPDFTEST)(USER=userarchive))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 9.2.0.1.0 - Production
Time: 10-JUN-2004 15:20:50
Tracing to file: E:oracleora92tempcli_1732.trc
Tns error struct:
nr err code: 0
ns main err code: 12542
TNS-12542: TNS:address already in use
ns secondary err code: 12560
nt main err code: 512
TNS-00512: Address already in use
nt secondary err code: 48
nt OS err code: 0
Cause
Problem is caused due to the fact that the free ports in the windows client has been exhausted and it is trying to make use of a port which is in TIME_WAIT state which gives the error TNS-12542: Address already in use.
Fix
There are 2 solutions available:
1.) Increase the free port range:
======================
Start Registry Editor (Regedt32.exe).
Locate the following key in the registry:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
On the Edit menu, click Add Value, and then add the following registry value:
Value Name: MaxUserPort Data Type: REG_DWORD Value: 65534
Valid Range: 5000-65534 (decimal) Default: 0x1388 (5000 decimal)
Description: This parameter controls the maximum port number used when an application requests any
available user port from the system. Normally, ephemeral (that is, short-lived) ports are allocated between the values of 1024 and 5000 inclusive.
2.) Decrease the value for TIME_WAIT state:
================================
TcpTimedWaitDelay (new in Windows NT versions 3.51 SP5 and later)
Key: TcpipParameters
Value Type: REG_DWORD - Time in seconds
Valid Range: 30-300 (decimal)
Default: 0xF0 (240 decimal)
Description: This parameter determines the length of time that a connection will stay in the TIME_WAIT state when being closed. While a connection is in the TIME_WAIT state, the socket pair
cannot be re- used. This is also known as the "2MSL" state, as by RFC the value should be twice
the maximum segment lifetime on the network. See RFC793 for further details.