UG 二次开发 倒角

//chamfer声明
uf_list_p_t edge_list;
tag_t edge_blk[5],tem_tag;
int subtype=1;
char *offset1="0.3";
char offset2="0";
char theta="45";
uf_list_p_t chamfer_list;
tag_t chamfer_id;
int count_list,i;
/ 1创建圆柱1特征 /
UF_MODL_create_cyl1( UF_NULLSIGN,cyl1_origin,"5",
"18", cyl_direction, &cyl1_obj_id );
UF_MODL_ask_feat_body( cyl1_obj_id, &cyl1_fea_id );
/获得块上标识/
UF_MODL_ask_body_edges(cyl1_fea_id,&edge_list);
UF_MODL_ask_list_count(edge_list,&count_list);
for (i=0;i< count_list;i++)
{
UF_MODL_ask_list_item(edge_list,i,&tem_tag);
edge_blk[i]=tem_tag;
}
UF_MODL_delete_list(&edge_list);
//倒角
UF_MODL_create_list(&chamfer_list);
UF_MODL_put_list_item(chamfer_list,edge_blk[0,1]);
UF_MODL_create_chamfer(subtype,offset1,offset2,theta,chamfer_list,&chamfer_id);

-倒角操作获取的ID的编码开始是0

-中间需要一次改指针

-顺序问题