ST7789P3初始化配置

void LCD_Init(void)
{
	CKCU_PeripClockConfig_TypeDef CKCUClock = {{0}};
	CKCUClock.Bit.PC         = 1;
	CKCUClock.Bit.AFIO       = 1;
	CKCUClock.Bit.PA        = 1;
	CKCUClock.Bit.PB        = 1;
	CKCU_PeripClockConfig(CKCUClock, ENABLE);
	
	LCD_SPI_Init();
	
    AFIO_GPxConfig(GPIO_PA, AFIO_PIN_12, AFIO_FUN_GPIO);
	AFIO_GPxConfig(GPIO_PB, AFIO_PIN_13 | AFIO_PIN_14 , AFIO_FUN_GPIO);
	
	GPIO_DirectionConfig(HT_GPIOB,AFIO_PIN_14 |  AFIO_PIN_13,GPIO_DIR_OUT);
	GPIO_DirectionConfig(HT_GPIOA,AFIO_PIN_12,GPIO_DIR_OUT);
	
	GPIO_WriteOutBits(HT_GPIOB,AFIO_PIN_14 | AFIO_PIN_13,SET);
	GPIO_WriteOutBits(HT_GPIOA,AFIO_PIN_12,SET);

 
	OLED_LEDK_Clr();
	OLED_RES_Clr();
	delay_ms(200);
	OLED_RES_Set();
	delay_ms(120);
    /* Sleep Out */
    LCD_Write_Cmd(0x11);
    /* wait for power stability */
    delay_ms(200);
 
    /* Memory Data Access Control */
    LCD_Write_Cmd(0x36);
    LCD_Write_Data(0x00);
 
    /* RGB 5-6-5-bit  */
    LCD_Write_Cmd(0x3A);
    LCD_Write_Data(0x55);
 
    /* Porch Setting */
    LCD_Write_Cmd(0xB2);
    LCD_Write_Data(0x0C);
    LCD_Write_Data(0x0C);
    LCD_Write_Data(0x00);
    LCD_Write_Data(0x33);
    LCD_Write_Data(0x33);
 
    /*  Gate Control */
    LCD_Write_Cmd(0xB7);
    LCD_Write_Data(0x72);


    /* VCOM Setting */
    LCD_Write_Cmd(0xBB);
    LCD_Write_Data(0x3D);   //Vcom=1.625V
 
    /* LCM Control */
    LCD_Write_Cmd(0xC0);
    LCD_Write_Data(0x2C);
 
    /* VDV and VRH Command Enable */
    LCD_Write_Cmd(0xC2);
    LCD_Write_Data(0x01);
 
    /* VRH Set */
    LCD_Write_Cmd(0xC3);
    LCD_Write_Data(0x19);
 
    /* VDV Set */
    LCD_Write_Cmd(0xC4);
    LCD_Write_Data(0x20);
 
    /* Frame Rate Control in Normal Mode */
    LCD_Write_Cmd(0xC6);
    LCD_Write_Data(0x0F);	//60MHZ
 
    /* Power Control 1 */
    LCD_Write_Cmd(0xD0);
    LCD_Write_Data(0xA4);
    LCD_Write_Data(0xA1);

    /* Positive Voltage Gamma Control */
    LCD_Write_Cmd(0xE0);
    LCD_Write_Data(0xD0);
    LCD_Write_Data(0x04);
    LCD_Write_Data(0x0D);
    LCD_Write_Data(0x11);
    LCD_Write_Data(0x13);
    LCD_Write_Data(0x2B);
    LCD_Write_Data(0x3F);
    LCD_Write_Data(0x54);
    LCD_Write_Data(0x4C);
    LCD_Write_Data(0x18);
    LCD_Write_Data(0x0D);
    LCD_Write_Data(0x0B);
    LCD_Write_Data(0x1F);
    LCD_Write_Data(0x23);

   /* Negative Voltage Gamma Control */
    LCD_Write_Cmd(0xE1);
    LCD_Write_Data(0xD0);
    LCD_Write_Data(0x04);
    LCD_Write_Data(0x0C);
    LCD_Write_Data(0x11);
    LCD_Write_Data(0x13);
    LCD_Write_Data(0x2C);
    LCD_Write_Data(0x3F);
    LCD_Write_Data(0x44);
    LCD_Write_Data(0x51);
    LCD_Write_Data(0x2F);
    LCD_Write_Data(0x1F);
    LCD_Write_Data(0x1F);
    LCD_Write_Data(0x20);
    LCD_Write_Data(0x23);
 
    /* Display Inversion On */
    LCD_Write_Cmd(0x21);
 
    LCD_Write_Cmd(0x29);

//LCD_Clear(WHITE);
	
	OLED_LEDK_Set();

}