测试OpenSIPS3.2的uac_registrant模块

• 试了试OpenSIPS3.2的uac_registrant模块，目标就是opensips向Kamailio注册，记录如下：

kamailio ip：192.168.31.63

opensips ip: 192.168.31.171

• 向kamailio subscriber表 插入数据，username = '1001', password='1234', 启动kamailio
• 向opensips  registrant表插入数据，插入之后是这样：

MariaDB [opensips]> select registrar,aor,username,password,binding_URI,expiry from registrant;
+-------------------+------------------------+----------+----------+-------------------------+--------+
| registrar         | aor                    | username | password | binding_URI             | expiry |
+-------------------+------------------------+----------+----------+-------------------------+--------+
| sip:192.168.31.63 | sip:[email protected] | 1001     | 1234     | sip:[email protected] |    300 |
+-------------------+------------------------+----------+----------+-------------------------+--------+
1 row in set (0.000 sec)

• 编辑opensips.cfg

#
# OpenSIPS residential configuration script
#     by OpenSIPS Solutions 
#
# This script was generated via "make menuconfig", from
#   the "Residential" scenario.
# You can enable / disable more features / functionalities by
#   re-generating the scenario with different options.#
#
# Please refer to the Core CookBook at:
#      https://opensips.org/Resources/DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#

####### Global Parameters #########

/* uncomment the following lines to enable debugging */
#debug_mode=yes

log_level=3
xlog_level=3
log_stderror=no
log_facility=LOG_LOCAL1

udp_workers=4

/* uncomment the next line to enable the auto temporary blacklisting of 
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns 
   lookup failures (default disabled) */
#dns_try_ipv6=yes

socket=udp:192.168.31.171:5060   # CUSTOMIZE ME
socket=tcp:192.168.31.171:5060   # CUSTOMIZE ME

####### Modules Section ########

#set module path
mpath="/usr/lib/x86_64-linux-gnu/opensips/modules/"

#### SIGNALING module
loadmodule "signaling.so"

#### StateLess module
loadmodule "sl.so"

#### Transaction Module
loadmodule "tm.so"
modparam("tm", "fr_timeout", 5)
modparam("tm", "fr_inv_timeout", 30)
modparam("tm", "restart_fr_on_each_reply", 0)
modparam("tm", "onreply_avp_mode", 1)

#### Record Route Module
loadmodule "rr.so"
/* do not append from tag to the RR (no need for this script) */
modparam("rr", "append_fromtag", 0)

#### MAX ForWarD module
loadmodule "maxfwd.so"

#### SIP MSG OPerationS module
loadmodule "sipmsgops.so"

#### FIFO Management Interface
loadmodule "mi_fifo.so"
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)

#### MYSQL module
loadmodule "db_mysql.so"

#### HTTPD module
loadmodule "httpd.so"
modparam("httpd", "port", 8888)

#### USeR LOCation module
loadmodule "usrloc.so"
modparam("usrloc", "nat_bflag", "NAT")
modparam("usrloc", "working_mode_preset", "single-instance-no-db")

#### REGISTRAR module
loadmodule "registrar.so"
modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT")
modparam("registrar", "received_avp", "$avp(received_nh)")/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)

#### ACCounting module
loadmodule "acc.so"
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_cancels", 0)
/* by default we do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure to enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
modparam("acc", "db_url",
	"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME

#### AUTHentication modules
loadmodule "auth.so"
loadmodule "auth_db.so"
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
	"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
modparam("auth_db", "load_credentials", "")

####  NAT modules
loadmodule "nathelper.so"
modparam("nathelper", "natping_interval", 10)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", "SIP_PING_FLAG")
modparam("nathelper", "sipping_from", "sip:[email protected]") #CUSTOMIZE ME
modparam("nathelper", "received_avp", "$avp(received_nh)")

#loadmodule "rtpproxy.so"
#modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:12221") # CUSTOMIZE ME

### vvvvip, load uac, uac_auth, and uac_registrant
loadmodule "uac.so"
loadmodule "uac_auth.so"
loadmodule "uac_registrant.so"
modparam("uac_registrant", "db_url", 
	"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
modparam("uac_registrant", "hash_size", 4)
modparam("uac_registrant", "timer_interval", 32)

####  MI_HTTP module
loadmodule "mi_http.so"

loadmodule "proto_udp.so"
loadmodule "proto_tcp.so" 

# main request routing logic

route{

	# initial NAT handling; detect if the request comes from behind a NAT
	# and apply contact fixing
	force_rport();
	if (nat_uac_test(23)) {
		if (is_method("REGISTER")) {
			fix_nated_register();
			setbflag("NAT");
		} else {
			fix_nated_contact();
			setflag("NAT");
		}
	}

	if (!mf_process_maxfwd_header(10)) {
		send_reply(483,"Too Many Hops");
		exit;
	}

	if (has_totag()) {

		# handle hop-by-hop ACK (no routing required)
		if ( is_method("ACK") && t_check_trans() ) {
			t_relay();
			exit;
		}

		# sequential request within a dialog should
		# take the path determined by record-routing
		if ( !loose_route() ) {
			# we do record-routing for all our traffic, so we should not
			# receive any sequential requests without Route hdr.
			send_reply(404,"Not here");
			exit;
		}

		if (is_method("BYE")) {
			# do accounting even if the transaction fails
			do_accounting("db","failed");
			
		}

		if (check_route_param("nat=yes")) 
			setflag("NAT");
		# route it out to whatever destination was set by loose_route()
		# in $du (destination URI).
		route(relay);
		exit;
	}

	# CANCEL processing
	if (is_method("CANCEL")) {
		if (t_check_trans())
			t_relay();
		exit;
	}

	# absorb retransmissions, but do not create transaction
	t_check_trans();

	if ( !(is_method("REGISTER")  ) ) {
		if (is_myself("$fd")) {
					
			# authenticate if from local subscriber
			# authenticate all initial non-REGISTER request that pretend to be
			# generated by local subscriber (domain from FROM URI is local)
			if (!proxy_authorize("", "subscriber")) {
				proxy_challenge("", "auth");
				exit;
			}
			if ($au!=$fU) {
				send_reply(403,"Forbidden auth ID");
				exit;
			}

			consume_credentials();
			# caller authenticated
			
		} else {
			# if caller is not local, then called number must be local
			
			if (!is_myself("$rd")) {
				send_reply(403,"Relay Forbidden");
				exit;
			}
		}
	}

	# preloaded route checking
	if (loose_route()) {
		xlog("L_ERR",
			"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
		if (!is_method("ACK"))
			send_reply(403,"Preload Route denied");
		exit;
	}

	# record routing
	if (!is_method("REGISTER|MESSAGE"))
		record_route();

	# account only INVITEs
	if (is_method("INVITE")) {
		
		do_accounting("db");
		
	}
	
	if (!is_myself("$rd")) {
		append_hf("P-hint: outbound\r\n"); 
		
		route(relay);
	}

	# requests for my domain
	
	if (is_method("PUBLISH|SUBSCRIBE")) {
		send_reply(503, "Service Unavailable");
		exit;
	}

	if (is_method("REGISTER")) {
		# authenticate the REGISTER requests
		if (!www_authorize("", "subscriber")) {
			www_challenge("", "auth");
			exit;
		}
		
		if ($au!=$tU) {
			send_reply(403,"Forbidden auth ID");
			exit;
		}
		if ($socket_in(proto) == "tcp")
			setflag("TCP_PERSISTENT");
		if (isflagset("NAT")) {
			setbflag("SIP_PING_FLAG");
		}
		# store the registration and generate a SIP reply
		if (!save("location"))
			xlog("failed to register AoR $tu\n");

		exit;
	}

	if ($rU==NULL) {
		# request with no Username in RURI
		send_reply(484,"Address Incomplete");
		exit;
	}
	 
	# do lookup with method filtering
	if (!lookup("location","m")) {
		if (!db_does_uri_exist("$ru","subscriber")) {
			send_reply(420,"Bad Extension");
			exit;
		}

		t_reply(404, "Not Found");
		exit;
	} 

	if (isbflagset("NAT")) setflag("NAT");

	# when routing via usrloc, log the missed calls also
	do_accounting("db","missed");
	
	route(relay);
}

route[relay] {
	# for INVITEs enable some additional helper routes
	if (is_method("INVITE")) {
		
		if (isflagset("NAT") && has_body("application/sdp")) {
			#rtpproxy_offer("ro");
			;
		}

		t_on_branch("per_branch_ops");
		t_on_reply("handle_nat");
		t_on_failure("missed_call");
	}

	if (isflagset("NAT")) {
		add_rr_param(";nat=yes");
	}

	if (!t_relay()) {
		send_reply(500,"Internal Error");
	}
	exit;
}

branch_route[per_branch_ops] {
	xlog("new branch at $ru\n");
}

onreply_route[handle_nat] {
	if (nat_uac_test(1))
		fix_nated_contact();
	if ( isflagset("NAT") && has_body("application/sdp") ) {
			#rtpproxy_answer("ro");
			;
	}
	xlog("incoming reply\n");
}

failure_route[missed_call] {
	if (t_was_cancelled()) {
		exit;
	}

	# uncomment the following lines if you want to block client 
	# redirect based on 3xx replies.
	##if (t_check_status("3[0-9][0-9]")) {
	##t_reply(404,"Not found");
	##	exit;
	##}	
}

• 启动opensips
• 一分钟后运行opensips-cli -x mi reg_list

opensips-cli -x mi reg_list
{
    "Records": [
        {
            "AOR": "sip:[email protected]",
            "expires": 300,
            "state": "REGISTERED_STATE",
            "enabled": "yes",
            "last_register_sent": "Wed Apr 19 21:02:35 2023",
            "registration_t_out": "Wed Apr 19 21:07:03 2023",
            "registrar": "sip:192.168.31.63",
            "binding": "sip:[email protected]",
            "proxy": "sip:192.168.31.63",
            "dst_IP": "IPv4",
            "ip": "192.168.31.63"
        }
    ]
}

opensips路由代码主要是osipsconfig自动产生的，我加的东西不多。

目前暂时只测试了注册功能，以后再试试呼叫。

Kamailio有uacreg，跟这个功能一样。

---全文完---