华为设备配置射频调优

1. 配置LSW和AC，使AP与AC之间能够传输CAPWAP报文
   [LSW1]vlan batch 10
   [LSW1-GigabitEthernet0/0/1]port link-type trunk
   [LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10
   [LSW1-GigabitEthernet0/0/2]port link-type trunk
   [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10
   [LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 10
   [LSW1-GigabitEthernet0/0/2]port-isolate enable
   [LSW1-GigabitEthernet0/0/3]port link-type trunk
   [LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 10
   [LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 10
   [LSW1-GigabitEthernet0/0/3]port-isolate enable
   [AC1]vlan batch 10
   [AC1-GigabitEthernet0/0/1]port link-type trunk
   [AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10

2. 配置AC与上层网络设备互通
   [AC1]vlan batch 20 30 40
   [AC1-Vlanif20]ip add 10.1.2.1 24
   [AC1-Vlanif30]ip add 10.1.3.1 24
   [AC1-Vlanif40]ip add 10.1.4.1 24
   [AC1]ip route-static 0.0.0.0 0.0.0.0 10.1.4.2
   [AC1-GigabitEthernet0/0/2]port link-type access
   [AC1-GigabitEthernet0/0/2]port default vlan 40

3. 配置AC给AP分配IP地址，AR给STA分配IP地址
   [AC1]dhcp enable
   [AC1]int Vlanif 10
   [AC1-Vlanif10]ip add 10.1.1.1 24
   [AC1-Vlanif10]dhcp select interface //配置AC通过接口地址池为AP分配IP地址
   [AC1-Vlanif20]dhcp select relay //配置AC作为DHCP中继并使能DHCP中继探测用户表项功能
   [AC1-Vlanif20]dhcp relay server-ip 10.1.4.2
   [AC1-Vlanif30]dhcp select relay
   [AC1-Vlanif30]dhcp relay server-ip 10.1.4.2
   [AR1]dhcp enable //配置AR作为DHCP服务器为STA分配IP地址
   [AR1]ip pool sta-ip-pool1
   [AR1-ip-pool-sta-ip-pool1]gateway-list 10.1.2.1
   [AR1-ip-pool-sta-ip-pool1]network 10.1.2.0 mask 24
   [AR1]ip pool sta-ip-pool2
   [AR1-ip-pool-sta-ip-pool2]gateway-list 10.1.3.1
   [AR1-ip-pool-sta-ip-pool2]network 10.1.3.0 mask 24
   [AR1-GigabitEthernet0/0/0]ip add 10.1.4.2 24
   [AR1-GigabitEthernet0/0/0]dhcp select global
   [AR1]ip route-static 10.1.2.0 24 10.1.4.1
   [AR1]ip route-static 10.1.3.0 24 10.1.4.1

4. 配置VLAN pool，用于作为业务VLAN
   [AC1]vlan pool sta-pool
   [AC1-vlan-pool-sta-pool]vlan 20 30
   [AC1-vlan-pool-sta-pool]assignment hash

5. 配置AP上线
   [AC1]wlan
   [AC1-wlan-view]ap-group name ap-group1 //创建AP组
   [AC1-wlan-view]regulatory-domain-profile name domain1 //创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板
   [AC1-wlan-regulate-domain-domain1]country-code cn
   [AC1-wlan-view]ap-group name ap-group1
   [AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain1
   [AC1]capwap source interface Vlanif 10 //配置AC的源接口
   [AC1]wlan
   [AC1-wlan-view]ap auth-mode mac-auth
   [AC1-wlan-view]ap-id 0 ap-mac 00e0-fcae-6d70 //在AC上离线导入AP
   [AC1-wlan-ap-0]ap-name ap1
   [AC1-wlan-ap-0]ap-group ap-group1
   [AC1-wlan-view]ap-id 1 ap-mac 00e0-fc31-7140
   [AC1-wlan-ap-1]ap-name ap2
   [AC1-wlan-ap-1]ap-group ap-group1
   

6. 配置WLAN业务参数
   [AC1-wlan-view]security-profile name wlan-security //创建安全模板，并配置安全策略
   [AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes
   [AC1-wlan-view]ssid-profile name wlan-ssid //创建名SSID模板，并配置SSID名称
   [AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net
   [AC1-wlan-view]vap-profile name wlan-vap //创建VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板
   [AC1-wlan-vap-prof-wlan-vap]forward-mode tunnel
   [AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-pool sta-pool
   [AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security
   [AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid
   [AC1-wlan-view]ap-group name ap-group1 //配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板配置
   [AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio all

7. 配置射频调优功能
   [AC1-wlan-view]rrm-profile name wlan-net //创建RRM模板,使能信道自动选择功能和发送功率自动选择功能
   [AC1-wlan-rrm-prof-wlan-net]undo calibrate auto-channel-select disable
   [AC1-wlan-rrm-prof-wlan-net]undo calibrate auto-txpower-select disable
   [AC1-wlan-view]air-scan-profile name wlan-airscan //创建空口扫描模板，并配置扫描信道集合、扫描间隔时间和扫描持续时间
   [AC1-wlan-air-scan-prof-wlan-airscan]scan-channel-set country-channel
   [AC1-wlan-air-scan-prof-wlan-airscan]scan-period 80
   [AC1-wlan-air-scan-prof-wlan-airscan]scan-interval 80000
   [AC1-wlan-view]radio-2g-profile name radio2g //创建2G射频模板，并在该模板下引用RRM模板和空口扫描模板
   [AC1-wlan-radio-2g-prof-radio2g]rrm-profile wlan-net
   [AC1-wlan-radio-2g-prof-radio2g]air-scan-profile wlan-airscan
   [AC1-wlan-view]radio-5g-profile name radio5g //创建5G射频模板,并在该模板下引用RRM模板和空口扫描模板
   [AC1-wlan-radio-5g-prof-radio5g]rrm-profile wlan-net
   [AC1-wlan-radio-5g-prof-radio5g]air-scan-profile wlan-airscan
   [AC1-wlan-view]ap-group name ap-group1 //在AP组下引用5G射频模板和2G射频模板
   [AC1-wlan-ap-group-ap-group1]radio-5g-profile radio5g radio 1
   [AC1-wlan-ap-group-ap-group1]radio-2g-profile radio2g radio 0
   [AC1-wlan-view]calibrate enable manual //配置射频调优模式为手动调优，并手动触发射频调优
   [AC1-wlan-view]calibrate manual startup