micro_ros
原文链接Supported Hardware | micro-ROS
Supported Hardware
The main targets of micro-ROS are mid-range 32-bits microcontroller families. Usually, the minimum requirements for running micro-ROS in an embedded platform are memory constraints. Since memory usage in micro-ROS is a complex matter we provide a complete article describing it and a tutorial on how to tune the memory consuption in the micro-ROS middleware.
In general micro-ROS will need MCUs that have tens of kilobytes of RAM memory and communication peripherals that enable the micro-ROS Client to Agent communication.
（STM32F103C8T6内存也有20K，是不是也能安装?）
The micro-ROS hardware support is divided into two categories:
- Officially supported boards
- Community supported boards
Officially supported boards
The officially supported boards are those which have been carried out or tested officially, and to which LTS is guaranteed.
/
STM32L4 Discovery kit IoT
Key features:
- MCU: ARM Cortex-M4 STM32L4
- RAM: 128 kB
- Flash: 1 MB
- Peripherals: Bluetooth, low-power RF module, 802.11 b/g/n, NFC, 2 digital microphone, temperature/humidity sensor, 3 axis IMU, ToF sensor...
Resources:
- Official website
Supported platforms:
RTOSes:Zephyr #这个开发板支持Zephyr的RTOS系统
External tools:Zephyr build system
Supported transports: USB, UART, Ethernet UDP
Olimex LTD STM32-E407
Key features:
- MCU: STM32F407ZGT6 Cortex-M4F
- RAM: 196 kB
- Flash: 1 MB
- Peripherals: USB OTG, Ethernet, SD Card slot, SPI, CAN, I2C...
Resources:
- Official website
- Schematics
- User Manual
从上边这个图片可以看到freeRTOS的市场占有率非常高，是主流的RTOS系统，所以Micro_ros才会支持
Supported platforms:
- RTOSes: Zephyr, FreeRTOS, NuttX
- External tools: Zephyr build system
Supported transports: USB (Z, N), UART (Z, F, N), Ethernet UDP (F, N)
Note: Only RTOS initials used for convenience.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Renesas EK RA6M5 and e2studio
Key features:
- MCU: ARM Cortex M-33 core @ 200 MHz
- RAM: 512 kB
- Flash: up to 2 MB
- Peripherals: Ethernet, SCI, SPI, I2C, I2S, UART, USB, SDIO, CAN, GPIO, ADC/DAC, PWM
Supported platforms:
RTOSes:FreeRTOS,ThreadX and Bare-metal
这个开发板支持的RTOS多，好像价格也比较贵
Supported transports: UDP, UART, USB-CDC
Espressif ESP32
Key features:
- MCU: ultra-low power dual-core Xtensa LX6
- RAM: 520 kB
- Flash: 4 MB
- Peripherals: Ethernet MAC, Wi-Fi 802.11 b/g/n, Bluetooth v4.2 BR/EDR, BLE, SPI, I2C, I2S, UART, SDIO, CAN, GPIO, ADC/DAC, PWM
- Datashee
Supported platforms:
- RTOSes: FreeRTOS
- External tools: ESP-IDF
Supported transports: UART, WiFi UDP, Ethernet UDP
Arduino Portenta H7
Key features:
- MCU: Dual-core Arm Cortex-M7 and Cortex-M4
- RAM: 8 MB
- Flash: 16 MB
- Peripherals: USB HS, Ethernet, WiFi/BT...
Resources:
- Official website
Supported platforms:
- RTOSes: –
- External tools: Arduino
Supported transports: USB, WiFi UDP
Raspberry Pi Pico RP2040
Key features:
- MCU: Dual-core Arm Cortex-M0+
- RAM: 264 kB
- Flash: up to 16 MB
- Peripherals: I2C, SPI, PIO...
Resources:
- Official website
- micro-ROS support package
Supported platforms:
- RTOSes: –
- External tools: Raspberry Pi Pico SDK
Supported transports: USB, UART
ROBOTIS OpenCR 1.0
Key features:
- MCU: ARM Cortex-M7 STM32F746ZGT6
- RAM: 320 kB
- Flash: 1024 kB
- Peripherals: 3-axis IMU, Dynamixel ports, SPI, I2C...
Resources:
- Official website
Supported platforms:
- RTOSes: –
- External tools: Arduino
Supported transports: USB, UART
Teensy 3.2
Key features:
- MCU: ARM Cortex-M4 MK20DX256VLH7
- RAM: 64 kB
- Flash: 256 kB
- Peripherals: USB, SPI, I2C, CAN, I2S...
Resources:
- Official website
Supported platforms:
- RTOSes: –
- External tools: Arduino
Supported transports: USB, UART
Teensy 4.0/4.1
Key features:
- MCU: ARM Cortex-M7 iMXRT1062
- RAM: 1024 kB
- Flash: 2048 kB
- Peripherals: USB, PWM, SPI, I2C, CAN, I2S, SDIO,...
Resources:
- Official website
Supported platforms:
- RTOSes: –
- External tools: Arduino
Supported transports: USB, UART, Ethernet UDP (4.1)
Crazyflie 2.1 Drone
Key features:
- MCU: ARM Cortex-M4 STM32F405
- RAM: 192 kB
- Flash: 1 MB
- Peripherals: 3 axis IMU, pressure sensor, SPI, I2C, UART, nRF51822 radio...
Resources:
- Official website
Supported platforms:
- RTOSes: FreeRTOS
- External tools: –
Supported transports: Custom Radio Link
STM32L4 Discovery kit IoT
Key features:
- MCU: ARM Cortex-M4 STM32L4
- RAM: 128 kB
- Flash: 1 MB
- Peripherals: Bluetooth, low-power RF module, 802.11 b/g/n, NFC, 2 digital microphone, temperature/humidity sensor, 3 axis IMU, ToF sensor...
Resources:
- Official website
Supported platforms:
- RTOSes: Zephyr
- External tools: Zephyr build system
Supported transports: USB, UART, Ethernet UDP
Olimex LTD STM32-E407
Key features:
- MCU: STM32F407ZGT6 Cortex-M4F
- RAM: 196 kB
- Flash: 1 MB
- Peripherals: USB OTG, Ethernet, SD Card slot, SPI, CAN, I2C...
Resources:
- Official website
- Schematics
- User Manual
Supported platforms:
- RTOSes: Zephyr, FreeRTOS, NuttX
- External tools: Zephyr build system
Supported transports: USB (Z, N), UART (Z, F, N), Ethernet UDP (F, N)
Note: Only RTOS initials used for convenience.
Community supported boards
The micro-ROS community supported boards are contributions of micro-ROS’ users and community, and are not guaranteed to be officially supported.
Arduino Due
Key features:
- MCU: ARM Cortex-M3 AT91SAM3X8E
- RAM: 96 kB
- Flash: 512 kB
Resources:
- Official website
Supported platforms:
- RTOSes: –
- External tools: Arduino
Supported transports: USB, UART
Arduino Zero
Key features:
- MCU: ARM Cortex-M0+ ATSAMD21G18
- RAM: 32 kB
- Flash: 256 kB
Resources:
- Official website
Supported platforms:
- RTOSes: –
- External tools: Arduino
Supported transports: USB, UART
ST NUCLEO-F446ZE
Resources:
- Official website
Supported platforms:
- RTOSes: FreeRTOS
- External tools: STM32CubeMX
Supported transports: UART
