HOWTO : Create a FTP(proftpd) server

A- The GUI way (for beginners only) ( 没用过)
1- Install proftpd and gproftpd with synaptic or with this command :

sudo apt-get install proftpd gproftpd

B- The secure way

(不选 standalone， netstat -ntl 时看不到 21号端口，不解 )
1- Install proftpd with synaptic or with this command :

Code:

sudo apt-get install proftpd

2- Add this line in /etc/shells file (sudo gedit /etc/shells to open the file) :

Code:

/bin/false

Create a /home/FTP-shared directory :

Code:

cd /home
sudo mkdir FTP-shared

Code:

sudo useradd userftp -p your_password -d /home/FTP-shared -s /bin/false
sudo passwd userftp

In FTP-shared directory create a download and an upload directory :

Code:

cd /home/FTP-shared/
sudo mkdir download
sudo mkdir upload

Now we have to set the good permissions for these directories :

Code:

cd /home
sudo chmod 755 FTP-shared
cd FTP-shared
sudo chmod 755 download
sudo chmod 777 upload

3- OK, now go to the proftpd configuration file :

Code:

sudo gedit /etc/proftpd/proftpd.conf 

and edit your proftpd.conf file like that if it fit to your need :

Code:

# To really apply changes reload proftpd after modifications.
AllowOverwrite on
AuthAliasOnly on

# Choose here the user alias you want !!!!
UserAlias sauron userftp

ServerName			"ChezFrodon"
ServerType 			standalone
DeferWelcome			on

MultilineRFC2228 on
DefaultServer			on
ShowSymlinks			off

TimeoutNoTransfer 600
TimeoutStalled 100
TimeoutIdle 2200

DisplayFirstChdir               .message
ListOptions                	"-l"

RequireValidShell 		off

TimeoutLogin 20

RootLogin 			off

# It's better for debug to create log files ;-)
ExtendedLog 			/var/log/ftp.log
TransferLog 			/var/log/xferlog
SystemLog			/var/log/syslog.log

#DenyFilter			\*.*/

# I don't choose to use /etc/ftpusers file (set inside the users you want to ban, not useful for me)
UseFtpUsers off

# Allow to restart a download
AllowStoreRestart		on

# Port 21 is the standard FTP port, so you may prefer to use another port for security reasons (choose here the port you want)
Port				1980

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 8

# Set the user and group that the server normally runs at.
User                  nobody
Group                 nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask				022	022

PersistentPasswd		off

MaxClients 8
MaxClientsPerHost 8
MaxClientsPerUser 8
MaxHostsPerUser 8

# Display a message after a successful login
AccessGrantMsg "welcome !!!"
# This message is displayed for each access good or not
ServerIdent                  on       "you're at home"

# Set /home/FTP-shared directory as home directory
DefaultRoot /home/FTP-shared

# Lock all the users in home directory, ***** really important *****
DefaultRoot ~

MaxLoginAttempts    5

#VALID LOGINS
<Limit LOGIN>
AllowUser userftp
DenyALL
</Limit>

<Directory /home/FTP-shared>
Umask 022 022
AllowOverwrite off
	<Limit MKD STOR DELE XMKD RNRF RNTO RMD XRMD>
	DenyAll
	</Limit>
</Directory>

<Directory /home/FTP-shared/download/*>
Umask 022 022
AllowOverwrite off
	<Limit MKD STOR DELE XMKD RNEF RNTO RMD XRMD>
	DenyAll
	</Limit>
</Directory>

<Directory /home/FTP-shared/upload/>
Umask 022 022
AllowOverwrite on
	<Limit READ RMD DELE>
      	DenyAll
    	</Limit>

    	<Limit STOR CWD MKD>
      	AllowAll
    	</Limit>
</Directory>

Ok you have done proftpd configuration. Your server is on port 1980 (in this exemple) and the access parameters are
user : sauron
password : the one you've set for userftp

4- To start/stop/restart your server :

Code:

sudo /etc/init.d/proftpd start
sudo /etc/init.d/proftpd stop
sudo /etc/init.d/proftpd restart

To perform a syntax check of your proftpd.conf file :

Code:

sudo proftpd -td5

To know who is connected on your server in realtime use "ftptop" command (use "t" caracter to swich to rate display), you can also use the "ftpwho" command.
other informations here