AVX Intrinsics各函数介绍
SIMD相关头文件包括：
//#include //MMX
//#include //SSE(also include ivec.h)
//#include //SSE2(also include fvec.h)
#include //MMX
#include //SSE(include mmintrin.h)
#include //SSE2(include xmmintrin.h)
#include //SSE3(include emmintrin.h)
#include //SSSE3(include pmmintrin.h)
#include //SSE4.1(include tmmintrin.h)
#include //SSE4.2(include smmintrin.h)
#include //AES(include nmmintrin.h)
#include //AVX(include wmmintrin.h)
#include //(include immintrin.h)
typedef union __declspec(intrin_type) _CRT_ALIGN(8) __m64
{
unsigned __int64 m64_u64;
float m64_f32[2];
__int8 m64_i8[8];
__int16 m64_i16[4];
__int32 m64_i32[2];
__int64 m64_i64;
unsigned __int8 m64_u8[8];
unsigned __int16 m64_u16[4];
unsigned __int32 m64_u32[2];
} __m64;xmmintrin.h为SSE 头文件，此头文件里包含MMX头文件，其中__m128的定义为：
typedef union __declspec(intrin_type) _CRT_ALIGN(16) __m128 {
float m128_f32[4];
unsigned __int64 m128_u64[2];
__int8 m128_i8[16];
__int16 m128_i16[8];
__int32 m128_i32[4];
__int64 m128_i64[2];
unsigned __int8 m128_u8[16];
unsigned __int16 m128_u16[8];
unsigned __int32 m128_u32[4];
} __m128;emmintrin.h为SSE2头文件，此头文件里包含SSE头文件，其中__m128i和__m128d的定义为：
typedef union __declspec(intrin_type) _CRT_ALIGN(16) __m128i {
__int8 m128i_i8[16];
__int16 m128i_i16[8];
__int32 m128i_i32[4];
__int64 m128i_i64[2];
unsigned __int8 m128i_u8[16];
unsigned __int16 m128i_u16[8];
unsigned __int32 m128i_u32[4];
unsigned __int64 m128i_u64[2];
} __m128i;
typedef struct __declspec(intrin_type) _CRT_ALIGN(16) __m128d {
double m128d_f64[2];
} __m128d;immintrin.h为AVX头文件，此头文件里包含AES头文件，其中__m256、__m256d、__m256i的定义为：
typedef union __declspec(intrin_type) _CRT_ALIGN(32) __m256 {
float m256_f32[8];
} __m256;
typedef struct __declspec(intrin_type) _CRT_ALIGN(32) {
double m256d_f64[4];
} __m256d;
typedef union __declspec(intrin_type) _CRT_ALIGN(32) __m256i {
__int8 m256i_i8[32];
__int16 m256i_i16[16];
__int32 m256i_i32[8];
__int64 m256i_i64[4];
unsigned __int8 m256i_u8[32];
unsigned __int16 m256i_u16[16];
unsigned __int32 m256i_u32[8];
unsigned __int64 m256i_u64[4];
} __m256i;immintrin.h文件中各函数的介绍：
/*
* Add Packed Double Precision Floating-Point Values
* **** VADDPD ymm1, ymm2, ymm3/m256
* Performs an SIMD add of the four packed double-precision floating-point
* values from the first source operand to the second source operand, and
* stores the packed double-precision floating-point results in the
* destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10+m20, r1=m11+m21, r2=m12+m22, r3=m13+m23
extern __m256d __cdecl _mm256_add_pd(__m256d m1, __m256d m2);
/*
* Add Packed Single Precision Floating-Point Values
* **** VADDPS ymm1, ymm2, ymm3/m256
* Performs an SIMD add of the eight packed single-precision floating-point
* values from the first source operand to the second source operand, and
* stores the packed single-precision floating-point results in the
* destination
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=m10+m20, r1=m11+m21, ..., r7=m17+m27
extern __m256 __cdecl _mm256_add_ps(__m256 m1, __m256 m2);
/*
* Add/Subtract Double Precision Floating-Point Values
* **** VADDSUBPD ymm1, ymm2, ymm3/m256
* Adds odd-numbered double-precision floating-point values of the first
* source operand with the corresponding double-precision floating-point
* values from the second source operand; stores the result in the odd-numbered
* values of the destination. Subtracts the even-numbered double-precision
* floating-point values from the second source operand from the corresponding
* double-precision floating values in the first source operand; stores the
* result into the even-numbered values of the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10-m20, r1=m11+m21, r2=m12-m22, r3=m13-m23
extern __m256d __cdecl _mm256_addsub_pd(__m256d m1, __m256d m2);
/*
* Add/Subtract Packed Single Precision Floating-Point Values
* **** VADDSUBPS ymm1, ymm2, ymm3/m256
* Adds odd-numbered single-precision floating-point values of the first source
* operand with the corresponding single-precision floating-point values from
* the second source operand; stores the result in the odd-numbered values of
* the destination. Subtracts the even-numbered single-precision floating-point
* values from the second source operand from the corresponding
* single-precision floating values in the first source operand; stores the
* result into the even-numbered values of the destination
*/
//m1=(m10, m11, m12, m13, ..., m17), m2=(m20, m21, m22, m23, ..., m27)
//则r0=m10-m20, r1=m11+m21, ... , r6=m16-m26, r7=m17+m27
extern __m256 __cdecl _mm256_addsub_ps(__m256 m1, __m256 m2);
/*
* Bitwise Logical AND of Packed Double Precision Floating-Point Values
* **** VANDPD ymm1, ymm2, ymm3/m256
* Performs a bitwise logical AND of the four packed double-precision
* floating-point values from the first source operand and the second
* source operand, and stores the result in the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=(m10 & m20), r1=(m11 & m21), r2=(m12 & m22), r3=(m13 & m23)
extern __m256d __cdecl _mm256_and_pd(__m256d m1, __m256d m2);
/*
* Bitwise Logical AND of Packed Single Precision Floating-Point Values
* **** VANDPS ymm1, ymm2, ymm3/m256
* Performs a bitwise logical AND of the eight packed single-precision
* floating-point values from the first source operand and the second
* source operand, and stores the result in the destination
*/
//m1=(m10, m11, m12, m13, ..., m17), m2=(m20, m21, m22, m23, ..., m27)
//则r0=(m10 & m20), r1=(m11 & m21), ..., r6=(m16 & m26), r7=(m17 & m27)
extern __m256 __cdecl _mm256_and_ps(__m256 m1, __m256 m2);
/*
* Bitwise Logical AND NOT of Packed Double Precision Floating-Point Values
* **** VANDNPD ymm1, ymm2, ymm3/m256
* Performs a bitwise logical AND NOT of the four packed double-precision
* floating-point values from the first source operand and the second source
* operand, and stores the result in the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=(~m10) & m20, r1=(~m11) & m21, r2=(~m12) & m22, r3=(~m13) & m23
extern __m256d __cdecl _mm256_andnot_pd(__m256d m1, __m256d m2);
/*
* Bitwise Logical AND NOT of Packed Single Precision Floating-Point Values
* **** VANDNPS ymm1, ymm2, ymm3/m256
* Performs a bitwise logical AND NOT of the eight packed single-precision
* floating-point values from the first source operand and the second source
* operand, and stores the result in the destination
*/
//m1=(m10, m11, m12, m13, ..., m17), m2=(m20, m21, m22, m23, ..., m27)
//则r0=(~m10) & m20, r1=(~m11) & m21), ..., r6=(~m16) & m26, r7=(~m17) & m27
extern __m256 __cdecl _mm256_andnot_ps(__m256 m1, __m256 m2);
/*
* Blend Packed Double Precision Floating-Point Values
* **** VBLENDPD ymm1, ymm2, ymm3/m256, imm8
* Double-Precision Floating-Point values from the second source operand are
* conditionally merged with values from the first source operand and written
* to the destination. The immediate bits [3:0] determine whether the
* corresponding Double-Precision Floating Point value in the destination is
* copied from the second source or first source. If a bit in the mask,
* orresponding to a word, is "1", then the Double-Precision Floating-Point
* value in the second source operand is copied, else the value in the first
* source operand is copied
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23), mask=[b3 b2 b1 b0]
//如果bn=1,则rn=m2n，如果bn=0, 则rn=m1n, 其中n为0,1,2,3
extern __m256d __cdecl _mm256_blend_pd(__m256d m1, __m256d m2, const int mask);
/*
* Blend Packed Single Precision Floating-Point Values
* **** VBLENDPS ymm1, ymm2, ymm3/m256, imm8
* Single precision floating point values from the second source operand are
* conditionally merged with values from the first source operand and written
* to the destination. The immediate bits [7:0] determine whether the
* corresponding single precision floating-point value in the destination is
* copied from the second source or first source. If a bit in the mask,
* corresponding to a word, is "1", then the single-precision floating-point
* value in the second source operand is copied, else the value in the first
* source operand is copied
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)，mask=[b7 b6...b1 b0]
//如果bn=1,则rn=m2n，如果bn=0, 则rn=m1n, 其中n为0,1,2,3,4,5,6,7
extern __m256 __cdecl _mm256_blend_ps(__m256 m1, __m256 m2, const int mask);
/*
* Blend Packed Double Precision Floating-Point Values
* **** VBLENDVPD ymm1, ymm2, ymm3/m256, ymm4
* Conditionally copy each quadword data element of double-precision
* floating-point value from the second source operand (third operand) and the
* first source operand (second operand) depending on mask bits defined in the
* mask register operand (fourth operand).
*/
extern __m256d __cdecl _mm256_blendv_pd(__m256d m1, __m256d m2, __m256d m3);
/*
* Blend Packed Single Precision Floating-Point Values
* **** VBLENDVPS ymm1, ymm2, ymm3/m256, ymm4
* Conditionally copy each dword data element of single-precision
* floating-point value from the second source operand (third operand) and the
* first source operand (second operand) depending on mask bits defined in the
* mask register operand (fourth operand).
*/
extern __m256 __cdecl _mm256_blendv_ps(__m256 m1, __m256 m2, __m256 mask);
/*
* Divide Packed Double-Precision Floating-Point Values
* **** VDIVPD ymm1, ymm2, ymm3/m256
* Performs an SIMD divide of the four packed double-precision floating-point
* values in the first source operand by the four packed double-precision
* floating-point values in the second source operand
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10/m20, r1=m11/m21, r2=m12/m22, r3=m13/m23
extern __m256d __cdecl _mm256_div_pd(__m256d m1, __m256d m2);
/*
* Divide Packed Single-Precision Floating-Point Values
* **** VDIVPS ymm1, ymm2, ymm3/m256
* Performs an SIMD divide of the eight packed single-precision
* floating-point values in the first source operand by the eight packed
* single-precision floating-point values in the second source operand
*/
//m1=(m10, m11, m12, m13, ..., m17), m2=(m20, m21, m22, m23, ..., m27)
//则r0=m10/m20, r1=m11/m21, ..., r6=m16/m26, r7=m17/m27
extern __m256 __cdecl _mm256_div_ps(__m256 m1, __m256 m2);
/*
* Dot Product of Packed Single-Precision Floating-Point Values
* **** VDPPS ymm1, ymm2, ymm3/m256, imm8
* Multiplies the packed single precision floating point values in the
* first source operand with the packed single-precision floats in the
* second source. Each of the four resulting single-precision values is
* conditionally summed depending on a mask extracted from the high 4 bits
* of the immediate operand. This sum is broadcast to each of 4 positions
* in the destination if the corresponding bit of the mask selected from
* the low 4 bits of the immediate operand is "1". If the corresponding
* low bit 0-3 of the mask is zero, the destination is set to zero.
* The process is replicated for the high elements of the destination.
*/
//m1=(m10, m11, m12, m13, ..., m17), m2=(m20, m21, m22, m23, ..., m27)
//mask=[b7 b6 ... b0], mask的低四位决定结果值是0，还是m1和m2相应位相乘后再求和
//若b0b1b2b3为0001，则r0=r1=r2=0,m4=m5=m6=0,此时如果b4b5b6b7为1001，
//则r3=m10*m20+m13*m23, r7=m14*m24+m17*m27,其它依次类推
extern __m256 __cdecl _mm256_dp_ps(__m256 m1, __m256 m2, const int mask);
/*
* Add Horizontal Double Precision Floating-Point Values
* **** VHADDPD ymm1, ymm2, ymm3/m256
* Adds pairs of adjacent double-precision floating-point values in the
* first source operand and second source operand and stores results in
* the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10+m11, r1=m20+m21, r2=m12+m13, r3=m22+m23
extern __m256d __cdecl _mm256_hadd_pd(__m256d m1, __m256d m2);
/*
* Add Horizontal Single Precision Floating-Point Values
* **** VHADDPS ymm1, ymm2, ymm3/m256
* Adds pairs of adjacent single-precision floating-point values in the
* first source operand and second source operand and stores results in
* the destination
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=m10+m11, r1=m12+m13, r2=m20+m21, r3=m22+m23,
//r4=m14+m15, r5=m16+m17, r6=m24+m25, r7=m26+m27
extern __m256 __cdecl _mm256_hadd_ps(__m256 m1, __m256 m2);
/*
* Subtract Horizontal Double Precision Floating-Point Values
* **** VHSUBPD ymm1, ymm2, ymm3/m256
* Subtract pairs of adjacent double-precision floating-point values in
* the first source operand and second source operand and stores results
* in the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10-m11, r1=m20-m21, r2=m12-m13, r3=m22-m23
extern __m256d __cdecl _mm256_hsub_pd(__m256d m1, __m256d m2);
/*
* Subtract Horizontal Single Precision Floating-Point Values
* **** VHSUBPS ymm1, ymm2, ymm3/m256
* Subtract pairs of adjacent single-precision floating-point values in
* the first source operand and second source operand and stores results
* in the destination.
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=m10-m11, r1=m12-m13, r2=m20-m21, r3=m22-m23,
//r4=m14-m15, r5=m16-m17, r6=m24-m25, r7=m26-m27
extern __m256 __cdecl _mm256_hsub_ps(__m256 m1, __m256 m2);
/*
* Maximum of Packed Double Precision Floating-Point Values
* **** VMAXPD ymm1, ymm2, ymm3/m256
* Performs an SIMD compare of the packed double-precision floating-point
* values in the first source operand and the second source operand and
* returns the maximum value for each pair of values to the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=max(m10,m20), r1=max(m11,m21), r2=max(m12,m22), r3=max(m13,m23)
extern __m256d __cdecl _mm256_max_pd(__m256d m1, __m256d m2);
/*
* Maximum of Packed Single Precision Floating-Point Values
* **** VMAXPS ymm1, ymm2, ymm3/m256
* Performs an SIMD compare of the packed single-precision floating-point
* values in the first source operand and the second source operand and
* returns the maximum value for each pair of values to the destination
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=max(m10,m20), r1=max(m11,m21), ..., r6=max(m16,m26), r7=max(m17,m27)
extern __m256 __cdecl _mm256_max_ps(__m256 m1, __m256 m2);
/*
* Minimum of Packed Double Precision Floating-Point Values
* **** VMINPD ymm1, ymm2, ymm3/m256
* Performs an SIMD compare of the packed double-precision floating-point
* values in the first source operand and the second source operand and
* returns the minimum value for each pair of values to the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=min(m10,m20), r1=min(m11,m21), r2=min(m12,m22), r3=min(m13,m23)
extern __m256d __cdecl _mm256_min_pd(__m256d m1, __m256d m2);
/*
* Minimum of Packed Single Precision Floating-Point Values
* **** VMINPS ymm1, ymm2, ymm3/m256
* Performs an SIMD compare of the packed single-precision floating-point
* values in the first source operand and the second source operand and
* returns the minimum value for each pair of values to the destination
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=min(m10,m20), r1=min(m11,m21), ..., r6=min(m16,m26), r7=min(m17,m27)
extern __m256 __cdecl _mm256_min_ps(__m256 m1, __m256 m2);
/*
* Multiply Packed Double Precision Floating-Point Values
* **** VMULPD ymm1, ymm2, ymm3/m256
* Performs a SIMD multiply of the four packed double-precision floating-point
* values from the first Source operand to the Second Source operand, and
* stores the packed double-precision floating-point results in the
* destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10*m20, r1=m11*m21, r2=m12*m22, r3=m13*m23
extern __m256d __cdecl _mm256_mul_pd(__m256d m1, __m256d m2);
/*
* Multiply Packed Single Precision Floating-Point Values
* **** VMULPS ymm1, ymm2, ymm3/m256
* Performs an SIMD multiply of the eight packed single-precision
* floating-point values from the first source operand to the second source
* operand, and stores the packed double-precision floating-point results in
* the destination
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=m10*m20, r1=m11*m21, ..., r6=m16*m26, r7=m17*m27
extern __m256 __cdecl _mm256_mul_ps(__m256 m1, __m256 m2);
/*
* Bitwise Logical OR of Packed Double Precision Floating-Point Values
* **** VORPD ymm1, ymm2, ymm3/m256
* Performs a bitwise logical OR of the four packed double-precision
* floating-point values from the first source operand and the second
* source operand, and stores the result in the destination
*/
//注意：有时得到的结果并不是m1和m2按位或的结果?
extern __m256d __cdecl _mm256_or_pd(__m256d m1, __m256d m2);
/*
* Bitwise Logical OR of Packed Single Precision Floating-Point Values
* **** VORPS ymm1, ymm2, ymm3/m256
* Performs a bitwise logical OR of the eight packed single-precision
* floating-point values from the first source operand and the second
* source operand, and stores the result in the destination
*/
//注意：有时得到的结果并不是m1和m2按位或的结果?
extern __m256 __cdecl _mm256_or_ps(__m256 m1, __m256 m2);
/*
* Shuffle Packed Double Precision Floating-Point Values
* **** VSHUFPD ymm1, ymm2, ymm3/m256, imm8
* Moves either of the two packed double-precision floating-point values from
* each double quadword in the first source operand into the low quadword
* of each double quadword of the destination; moves either of the two packed
* double-precision floating-point values from the second source operand into
* the high quadword of each double quadword of the destination operand.
* The selector operand determines which values are moved to the destination
*/
extern __m256d __cdecl _mm256_shuffle_pd(__m256d m1, __m256d m2, const int select);
/*
* Shuffle Packed Single Precision Floating-Point Values
* **** VSHUFPS ymm1, ymm2, ymm3/m256, imm8
* Moves two of the four packed single-precision floating-point values
* from each double qword of the first source operand into the low
* quadword of each double qword of the destination; moves two of the four
* packed single-precision floating-point values from each double qword of
* the second source operand into to the high quadword of each double qword
* of the destination. The selector operand determines which values are moved
* to the destination.
*/
extern __m256 __cdecl _mm256_shuffle_ps(__m256 m1, __m256 m2, const int select);
/*
* Subtract Packed Double Precision Floating-Point Values
* **** VSUBPD ymm1, ymm2, ymm3/m256
* Performs an SIMD subtract of the four packed double-precision floating-point
* values of the second Source operand from the first Source operand, and
* stores the packed double-precision floating-point results in the destination
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r0=m10-m20, r1=m11-m21, r2=m12-m22, r3=m13-m23
extern __m256d __cdecl _mm256_sub_pd(__m256d m1, __m256d m2);
/*
* Subtract Packed Single Precision Floating-Point Values
* **** VSUBPS ymm1, ymm2, ymm3/m256
* Performs an SIMD subtract of the eight packed single-precision
* floating-point values in the second Source operand from the First Source
* operand, and stores the packed single-precision floating-point results in
* the destination
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r0=m10-m20, r1=m11-m21, ..., r6=m16-m26, r7=m17-m27
extern __m256 __cdecl _mm256_sub_ps(__m256 m1, __m256 m2);
/*
* Bitwise Logical XOR of Packed Double Precision Floating-Point Values
* **** VXORPD ymm1, ymm2, ymm3/m256
* Performs a bitwise logical XOR of the four packed double-precision
* floating-point values from the first source operand and the second
* source operand, and stores the result in the destination
*/
//注意：有时得到的结果并不是m1和m2按位异或的结果?
extern __m256d __cdecl _mm256_xor_pd(__m256d m1, __m256d m2);
/*
* Bitwise Logical XOR of Packed Single Precision Floating-Point Values
* **** VXORPS ymm1, ymm2, ymm3/m256
* Performs a bitwise logical XOR of the eight packed single-precision
* floating-point values from the first source operand and the second
* source operand, and stores the result in the destination
*/
//注意：有时得到的结果并不是m1和m2按位异或的结果?
extern __m256 __cdecl _mm256_xor_ps(__m256 m1, __m256 m2);
/*
* Compare Packed Double-Precision Floating-Point Values
* **** VCMPPD xmm1, xmm2, xmm3/m128, imm8
* **** VCMPPD ymm1, ymm2, ymm3/m256, imm8
* Performs an SIMD compare of the four packed double-precision floating-point
* values in the second source operand (third operand) and the first source
* operand (second operand) and returns the results of the comparison to the
* destination operand (first operand). The comparison predicate operand
* (immediate) specifies the type of comparison performed on each of the pairs
* of packed values.
* For 128-bit intrinsic with compare predicate values in range 0-7 compiler
* may generate SSE2 instructions if it is warranted for performance reasons.
*/
extern __m128d __cdecl _mm_cmp_pd(__m128d m1, __m128d m2, const int predicate);
extern __m256d __cdecl _mm256_cmp_pd(__m256d m1, __m256d m2, const int predicate);
/*
* Compare Packed Single-Precision Floating-Point Values
* **** VCMPPS xmm1, xmm2, xmm3/m256, imm8
* **** VCMPPS ymm1, ymm2, ymm3/m256, imm8
* Performs a SIMD compare of the packed single-precision floating-point values
* in the second source operand (third operand) and the first source operand
* (second operand) and returns the results of the comparison to the destination
* operand (first operand). The comparison predicate operand (immediate)
* specifies the type of comparison performed on each of the pairs of packed
* values.
* For 128-bit intrinsic with compare predicate values in range 0-7 compiler
* may generate SSE2 instructions if it is warranted for performance reasons.
*/
extern __m128 __cdecl _mm_cmp_ps(__m128 m1, __m128 m2, const int predicate);
extern __m256 __cdecl _mm256_cmp_ps(__m256 m1, __m256 m2, const int predicate);
/*
* Compare Scalar Double-Precision Floating-Point Values
* **** VCMPSD xmm1, xmm2, xmm3/m64, imm8
* Compares the low double-precision floating-point values in the second source
* operand (third operand) and the first source operand (second operand) and
* returns the results in of the comparison to the destination operand (first
* operand). The comparison predicate operand (immediate operand) specifies the
* type of comparison performed.
* For compare predicate values in range 0-7 compiler may generate SSE2
* instructions if it is warranted for performance reasons.
*/
extern __m128d __cdecl _mm_cmp_sd(__m128d m1, __m128d m2, const int predicate);
/*
* Compare Scalar Single-Precision Floating-Point Values
* **** VCMPSS xmm1, xmm2, xmm3/m64, imm8
* Compares the low single-precision floating-point values in the second source
* operand (third operand) and the first source operand (second operand) and
* returns the results of the comparison to the destination operand (first
* operand). The comparison predicate operand (immediate operand) specifies
* the type of comparison performed.
* For compare predicate values in range 0-7 compiler may generate SSE2
* instructions if it is warranted for performance reasons.
*/
extern __m128 __cdecl _mm_cmp_ss(__m128 m1, __m128 m2, const int predicate);
/*
* Convert Packed Doubleword Integers to
* Packed Double-Precision Floating-Point Values
* **** VCVTDQ2PD ymm1, xmm2/m128
* Converts four packed signed doubleword integers in the source operand to
* four packed double-precision floating-point values in the destination
*/
//从__int32类型转换到double类型
extern __m256d __cdecl _mm256_cvtepi32_pd(__m128i m1);
/*
* Convert Packed Doubleword Integers to
* Packed Single-Precision Floating-Point Values
* **** VCVTDQ2PS ymm1, ymm2/m256
* Converts eight packed signed doubleword integers in the source operand to
* eight packed double-precision floating-point values in the destination
*/
//从__int32类型转换到float类型
extern __m256 __cdecl _mm256_cvtepi32_ps(__m256i m1);
/*
* Convert Packed Double-Precision Floating-point values to
* Packed Single-Precision Floating-Point Values
* **** VCVTPD2PS xmm1, ymm2/m256
* Converts four packed double-precision floating-point values in the source
* operand to four packed single-precision floating-point values in the
* destination
*/
//从double类型转换到float类型
extern __m128 __cdecl _mm256_cvtpd_ps(__m256d m1);
/*
* Convert Packed Single Precision Floating-Point Values to
* Packed Singed Doubleword Integer Values
* **** VCVTPS2DQ ymm1, ymm2/m256
* Converts eight packed single-precision floating-point values in the source
* operand to eight signed doubleword integers in the destination
*/
//从float类型转换到__int32类型
extern __m256i __cdecl _mm256_cvtps_epi32(__m256 m1);
/*
* Convert Packed Single Precision Floating-point values to
* Packed Double Precision Floating-Point Values
* **** VCVTPS2PD ymm1, xmm2/m128
* Converts four packed single-precision floating-point values in the source
* operand to four packed double-precision floating-point values in the
* destination
*/
//从float类型转换到double类型
extern __m256d __cdecl _mm256_cvtps_pd(__m128 m1);
/*
* Convert with Truncation Packed Double-Precision Floating-Point values to
* Packed Doubleword Integers
* **** VCVTTPD2DQ xmm1, ymm2/m256
* Converts four packed double-precision floating-point values in the source
* operand to four packed signed doubleword integers in the destination.
* When a conversion is inexact, a truncated (round toward zero) value is
* returned. If a converted result is larger than the maximum signed doubleword
* integer, the floating-point invalid exception is raised, and if this
* exception is masked, the indefinite integer value (80000000H) is returned
*/
//从double类型转换到__int32类型，truncated
extern __m128i __cdecl _mm256_cvttpd_epi32(__m256d m1);
/*
* Convert Packed Double-Precision Floating-point values to
* Packed Doubleword Integers
* **** VCVTPD2DQ xmm1, ymm2/m256
* Converts four packed double-precision floating-point values in the source
* operand to four packed signed doubleword integers in the destination
*/
//从double类型转换到__int32类型
extern __m128i __cdecl _mm256_cvtpd_epi32(__m256d m1);
/*
* Convert with Truncation Packed Single Precision Floating-Point Values to
* Packed Singed Doubleword Integer Values
* **** VCVTTPS2DQ ymm1, ymm2/m256
* Converts eight packed single-precision floating-point values in the source
* operand to eight signed doubleword integers in the destination.
* When a conversion is inexact, a truncated (round toward zero) value is
* returned. If a converted result is larger than the maximum signed doubleword
* integer, the floating-point invalid exception is raised, and if this
* exception is masked, the indefinite integer value (80000000H) is returned
*/
//从float类型转换到__int32类型,truncated
extern __m256i __cdecl _mm256_cvttps_epi32(__m256 m1);
/*
* Extract packed floating-point values
* **** VEXTRACTF128 xmm1/m128, ymm2, imm8
* Extracts 128-bits of packed floating-point values from the source operand
* at an 128-bit offset from imm8[0] into the destination
*/
//offset:a constant integer value that represents the 128-bit offset from
//where extraction must start
//从256位中提取128位，offset决定提取的起始位置
extern __m128 __cdecl _mm256_extractf128_ps(__m256 m1, const int offset);
extern __m128d __cdecl _mm256_extractf128_pd(__m256d m1, const int offset);
extern __m128i __cdecl _mm256_extractf128_si256(__m256i m1, const int offset);
/*
* Zero All YMM registers
* **** VZEROALL
* Zeros contents of all YMM registers
*/
extern void __cdecl _mm256_zeroall(void);
/*
* Zero Upper bits of YMM registers
* **** VZEROUPPER
* Zeros the upper 128 bits of all YMM registers. The lower 128-bits of the
* registers (the corresponding XMM registers) are unmodified
*/
extern void __cdecl _mm256_zeroupper(void);
/*
* Permute Single-Precision Floating-Point Values
* **** VPERMILPS ymm1, ymm2, ymm3/m256
* **** VPERMILPS xmm1, xmm2, xmm3/m128
* Permute Single-Precision Floating-Point values in the first source operand
* using 8-bit control fields in the low bytes of corresponding elements the
* shuffle control and store results in the destination
*/
//control:a vector with 2-bit control fields, one for each corresponding element
//of the source vector, for the 256-bit m1 source vector this control vector
//contains eight 2-bit control fields,for the 128-bit m1 source vector this
//control vector contains four 2-bit control fields
extern __m256 __cdecl _mm256_permutevar_ps(__m256 m1, __m256i control);
extern __m128 __cdecl _mm_permutevar_ps(__m128 a, __m128i control);
/*
* Permute Single-Precision Floating-Point Values
* **** VPERMILPS ymm1, ymm2/m256, imm8
* **** VPERMILPS xmm1, xmm2/m128, imm8
* Permute Single-Precision Floating-Point values in the first source operand
* using four 2-bit control fields in the 8-bit immediate and store results
* in the destination
*/
//control:an integer specified as an 8-bit immediate;for the 256-bit m1 vector
//this integer contains four 2-bit control fields in the low 8 bits of
//the immediate, for the 128-bit m1 vector this integer contains two 2-bit
//control fields in the low 4 bits of the immediate
extern __m256 __cdecl _mm256_permute_ps(__m256 m1, int control);
extern __m128 __cdecl _mm_permute_ps(__m128 a, int control);
/*
* Permute Double-Precision Floating-Point Values
* **** VPERMILPD ymm1, ymm2, ymm3/m256
* **** VPERMILPD xmm1, xmm2, xmm3/m128
* Permute Double-Precision Floating-Point values in the first source operand
* using 8-bit control fields in the low bytes of the second source operand
* and store results in the destination
*/
//control:a vector with 1-bit control fields, one for each corresponding element
//of the source vector, for the 256-bit m1 source vector this control vector
//contains four 1-bit control fields in the low 4 bits of the immediate, for the
//128-bit m1 source vector this control vector contains two 1-bit control fields
//in the low 2 bits of the immediate
extern __m256d __cdecl _mm256_permutevar_pd(__m256d m1, __m256i control);
extern __m128d __cdecl _mm_permutevar_pd(__m128d a, __m128i control);
/*
* Permute Double-Precision Floating-Point Values
* **** VPERMILPD ymm1, ymm2/m256, imm8
* **** VPERMILPD xmm1, xmm2/m128, imm8
* Permute Double-Precision Floating-Point values in the first source operand
* using two, 1-bit control fields in the low 2 bits of the 8-bit immediate
* and store results in the destination
*/
//control:an integer specified as an 8-bit immediate; for the 256-bit m1 vector
//this integer contains four 1-bit control fields in the low 4 bits of the
//immediate, for the 128-bit m1 vector this integer contains two 1-bit
//control fields in the low 2 bits of the immediate
extern __m256d __cdecl _mm256_permute_pd(__m256d m1, int control);
extern __m128d __cdecl _mm_permute_pd(__m128d a, int control);
/*
* Permute Floating-Point Values
* **** VPERM2F128 ymm1, ymm2, ymm3/m256, imm8
* Permute 128 bit floating-point-containing fields from the first source
* operand and second source operand using bits in the 8-bit immediate and
* store results in the destination
*/
//control:an immediate byte that specifies two 2-bit control fields and two
//additional bits which specify zeroing behavior
extern __m256 __cdecl _mm256_permute2f128_ps(__m256 m1, __m256 m2, int control);
extern __m256d __cdecl _mm256_permute2f128_pd(__m256d m1, __m256d m2, int control);
extern __m256i __cdecl _mm256_permute2f128_si256(__m256i m1, __m256i m2, int control);
/*
* Load with Broadcast
* **** VBROADCASTSS ymm1, m32
* **** VBROADCASTSS xmm1, m32
* Load floating point values from the source operand and broadcast to all
* elements of the destination
*/
//*a:pointer to a memory location that can hold constant 256-bit or
//128-bit float32 values, 则r0=r1=...=rn=a[0]
extern __m256 __cdecl _mm256_broadcast_ss(float const *a);
extern __m128 __cdecl _mm_broadcast_ss(float const *a);
/*
* Load with Broadcast
* **** VBROADCASTSD ymm1, m64
* Load floating point values from the source operand and broadcast to all
* elements of the destination
*/
//则r0=r1=r2=r3=a[0]
extern __m256d __cdecl _mm256_broadcast_sd(double const *a);
/*
* Load with Broadcast
* **** VBROADCASTF128 ymm1, m128
* Load floating point values from the source operand and broadcast to all
* elements of the destination
*/
//若*a为a[0],a[1],则r0=r2=a[0], r1=r3=a[1]
extern __m256 __cdecl _mm256_broadcast_ps(__m128 const *a);
extern __m256d __cdecl _mm256_broadcast_pd(__m128d const *a);
/*
* Insert packed floating-point values
* **** VINSERTF128 ymm1, ymm2, xmm3/m128, imm8
* Performs an insertion of 128-bits of packed floating-point values from the
* second source operand into an the destination at an 128-bit offset from
* imm8[0]. The remaining portions of the destination are written by the
* corresponding fields of the first source operand
*/
//offset:an integer value that represents the 128-bit offset
//where the insertion must start
//The remaining portions of the destination are written by the corresponding
//elements of the first source vector, a
extern __m256 __cdecl _mm256_insertf128_ps(__m256 a, __m128 b, int offset);
extern __m256d __cdecl _mm256_insertf128_pd(__m256d a, __m128d b, int offset);
extern __m256i __cdecl _mm256_insertf128_si256(__m256i a, __m128i b, int offset);
/*
* Move Aligned Packed Double-Precision Floating-Point Values
* **** VMOVAPD ymm1, m256
* **** VMOVAPD m256, ymm1
* Moves 4 double-precision floating-point values from the source operand to
* the destination
*/
//*a:the address must be 32-byte aligned
extern __m256d __cdecl _mm256_load_pd(double const *a);
extern void __cdecl _mm256_store_pd(double *a, __m256d b);
/*
* Move Aligned Packed Single-Precision Floating-Point Values
* **** VMOVAPS ymm1, m256
* **** VMOVAPS m256, ymm1
* Moves 8 single-precision floating-point values from the source operand to
* the destination
*/
//*a:the address must be 32-byte aligned
extern __m256 __cdecl _mm256_load_ps(float const *a);
extern void __cdecl _mm256_store_ps(float *a, __m256 b);
/*
* Move Unaligned Packed Double-Precision Floating-Point Values
* **** VMOVUPD ymm1, m256
* **** VMOVUPD m256, ymm1
* Moves 256 bits of packed double-precision floating-point values from the
* source operand to the destination
*/
//The address a does not need to be 32-byte aligned
extern __m256d __cdecl _mm256_loadu_pd(double const *a);
extern void __cdecl _mm256_storeu_pd(double *a, __m256d b);
/*
* Move Unaligned Packed Single-Precision Floating-Point Values
* **** VMOVUPS ymm1, m256
* **** VMOVUPS m256, ymm1
* Moves 256 bits of packed single-precision floating-point values from the
* source operand to the destination
*/
//The address a does not need to be 32-byte aligned
extern __m256 __cdecl _mm256_loadu_ps(float const *a);
extern void __cdecl _mm256_storeu_ps(float *a, __m256 b);
/*
* Move Aligned Packed Integer Values
* **** VMOVDQA ymm1, m256
* **** VMOVDQA m256, ymm1
* Moves 256 bits of packed integer values from the source operand to the
* destination
*/
//The address a does not need to be 32-byte aligned
extern __m256i __cdecl _mm256_load_si256(__m256i const *a);
extern void __cdecl _mm256_store_si256(__m256i *a, __m256i b);
/*
* Move Unaligned Packed Integer Values
* **** VMOVDQU ymm1, m256
* **** VMOVDQU m256, ymm1
* Moves 256 bits of packed integer values from the source operand to the
* destination
*/
//The address a does not need to be 32-byte aligned
extern __m256i __cdecl _mm256_loadu_si256(__m256i const *a);
extern void __cdecl _mm256_storeu_si256(__m256i *a, __m256i b);
/*
* Conditional SIMD Packed Loads and Stores
* **** VMASKMOVPD xmm1, xmm2, m128
* **** VMASKMOVPD ymm1, ymm2, m256
* **** VMASKMOVPD m128, xmm1, xmm2
* **** VMASKMOVPD m256, ymm1, ymm2
*
* Load forms:
* Load packed values from the 128-bit (XMM forms) or 256-bit (YMM forms)
* memory location (third operand) into the destination XMM or YMM register
* (first operand) using a mask in the first source operand (second operand).
*
* Store forms:
* Stores packed values from the XMM or YMM register in the second source
* operand (third operand) into the 128-bit (XMM forms) or 256-bit (YMM forms)
* memory location using a mask in first source operand (second operand).
* Stores are atomic.
*/
//The mask is calculated from the most significant bit of each qword of the mask
//register. If any of the bits of the mask is set to zero, the corresponding value
//from the memory location is not loaded, and the corresponding field of the
//destination vector is set to zero.
extern __m256d __cdecl _mm256_maskload_pd(double const *a, __m256i mask);
extern void __cdecl _mm256_maskstore_pd(double *a, __m256i mask, __m256d b);
extern __m128d __cdecl _mm_maskload_pd(double const *a, __m128i mask);
extern void __cdecl _mm_maskstore_pd(double *a, __m128i mask, __m128d b);
/*
* Conditional SIMD Packed Loads and Stores
* **** VMASKMOVPS xmm1, xmm2, m128
* **** VMASKMOVPS ymm1, ymm2, m256
* **** VMASKMOVPS m128, xmm1, xmm2
* **** VMASKMOVPS m256, ymm1, ymm2
*
* Load forms:
* Load packed values from the 128-bit (XMM forms) or 256-bit (YMM forms)
* memory location (third operand) into the destination XMM or YMM register
* (first operand) using a mask in the first source operand (second operand).
*
* Store forms:
* Stores packed values from the XMM or YMM register in the second source
* operand (third operand) into the 128-bit (XMM forms) or 256-bit (YMM forms)
* memory location using a mask in first source operand (second operand).
* Stores are atomic.
*/
//The mask is calculated from the most significant bit of each dword of the mask
//register. If any of the bits of the mask is set to zero, the corresponding
//value from the memory location is not loaded, and the corresponding field of
//the destination vector is set to zero.
extern __m256 __cdecl _mm256_maskload_ps(float const *a, __m256i mask);
extern void __cdecl _mm256_maskstore_ps(float *a, __m256i mask, __m256 b);
extern __m128 __cdecl _mm_maskload_ps(float const *a, __m128i mask);
extern void __cdecl _mm_maskstore_ps(float *a, __m128i mask, __m128 b);
/*
* Replicate Single-Precision Floating-Point Values
* **** VMOVSHDUP ymm1, ymm2/m256
* Duplicates odd-indexed single-precision floating-point values from the
* source operand
*/
//a=(a0, a1, a2, a3, a4, a5, a6, a7);则r=(a1, a1, a3, a3, a5, a5, a7, a7)
extern __m256 __cdecl _mm256_movehdup_ps(__m256 a);
/*
* Replicate Single-Precision Floating-Point Values
* **** VMOVSLDUP ymm1, ymm2/m256
* Duplicates even-indexed single-precision floating-point values from the
* source operand
*/
//a=(a0, a1, a2, a3, a4, a5, a6, a7);则r=(a0, a0, a2, a2, a4, a4, a6, a6)
extern __m256 __cdecl _mm256_moveldup_ps(__m256 a);
/*
* Replicate Double-Precision Floating-Point Values
* **** VMOVDDUP ymm1, ymm2/m256
* Duplicates even-indexed double-precision floating-point values from the
* source operand
*/
//a=(a0, a1, a2, a3), 则r=(a0, a0, a2, a2)
extern __m256d __cdecl _mm256_movedup_pd(__m256d a);
/*
* Move Unaligned Integer
* **** VLDDQU ymm1, m256
* The instruction is functionally similar to VMOVDQU YMM, m256 for loading
* from memory. That is: 32 bytes of data starting at an address specified by
* the source memory operand are fetched from memory and placed in a
* destination
*/
//*a:points to a memory location from where unaligned integer value must be moved
extern __m256i __cdecl _mm256_lddqu_si256(__m256i const *a);
/*
* Store Packed Integers Using Non-Temporal Hint
* **** VMOVNTDQ m256, ymm1
* Moves the packed integers in the source operand to the destination using a
* non-temporal hint to prevent caching of the data during the write to memory
*/
//the address must be 32-byte aligned
extern void __cdecl _mm256_stream_si256(__m256i *p, __m256i a);
/*
* Store Packed Double-Precision Floating-Point Values Using Non-Temporal Hint
* **** VMOVNTPD m256, ymm1
* Moves the packed double-precision floating-point values in the source
* operand to the destination operand using a non-temporal hint to prevent
* caching of the data during the write to memory
*/
//the address must be 32-byte aligned
extern void __cdecl _mm256_stream_pd(double *p, __m256d a);
/*
* Store Packed Single-Precision Floating-Point Values Using Non-Temporal Hint
* **** VMOVNTPS m256, ymm1
* Moves the packed single-precision floating-point values in the source
* operand to the destination operand using a non-temporal hint to prevent
* caching of the data during the write to memory
*/
//the address must be 32-byte aligned
extern void __cdecl _mm256_stream_ps(float *p, __m256 a);
/*
* Compute Approximate Reciprocals of Packed Single-Precision Floating-Point Values
* **** VRCPPS ymm1, ymm2/m256
* Performs an SIMD computation of the approximate reciprocals of the eight
* packed single precision floating-point values in the source operand and
* stores the packed single-precision floating-point results in the destination
*/
//a=(a0, a1, a2, ..., a6, a7);
//则r=(1/a0, 1/a1, ..., 1/a6, 1/a7), 求倒数
extern __m256 __cdecl _mm256_rcp_ps(__m256 a);
/*
* Compute Approximate Reciprocals of Square Roots of
* Packed Single-Precision Floating-point Values
* **** VRSQRTPS ymm1, ymm2/m256
* Performs an SIMD computation of the approximate reciprocals of the square
* roots of the eight packed single precision floating-point values in the
* source operand and stores the packed single-precision floating-point results
* in the destination
*/
//a=(a0, a1, a2, ..., a6, a7);
//则r=(1/sqrt(a0), 1/sqrt(a1), ..., 1/sqrt(a6), 1/sqrt(a7)), 先开方再求倒数
extern __m256 __cdecl _mm256_rsqrt_ps(__m256 a);
/*
* Square Root of Double-Precision Floating-Point Values
* **** VSQRTPD ymm1, ymm2/m256
* Performs an SIMD computation of the square roots of the two or four packed
* double-precision floating-point values in the source operand and stores
* the packed double-precision floating-point results in the destination
*/
//a=(a0, a1, a2, a3, a4);则r=(sqrt(a0),sqrt(a1), sqrt(a2), sqrt(a3)), 求开方
extern __m256d __cdecl _mm256_sqrt_pd(__m256d a);
/*
* Square Root of Single-Precision Floating-Point Values
* **** VSQRTPS ymm1, ymm2/m256
* Performs an SIMD computation of the square roots of the eight packed
* single-precision floating-point values in the source operand stores the
* packed double-precision floating-point results in the destination
*/
//a=(a0, a1, a2, ..., a3, a4);则r=(sqrt(a0),sqrt(a1), ..., sqrt(a2), sqrt(a3)), 求开方
extern __m256 __cdecl _mm256_sqrt_ps(__m256 a);
/*
* Round Packed Double-Precision Floating-Point Values
* **** VROUNDPD ymm1,ymm2/m256,imm8
* Round the four Double-Precision Floating-Point Values values in the source
* operand by the rounding mode specified in the immediate operand and place
* the result in the destination. The rounding process rounds the input to an
* integral value and returns the result as a double-precision floating-point
* value. The Precision Floating Point Exception is signaled according to the
* immediate operand. If any source operand is an SNaN then it will be
* converted to a QNaN.
*/
//a=(22.8, -11.3, -33.8, 4.3),
//若iRoundMode=0x0A, 则r=(23, -11, -33, 5)
//若iRoundMode=0x09, 则r=(22, -12, -34, 4)
extern __m256d __cdecl _mm256_round_pd(__m256d a, int iRoundMode);
#define _mm256_ceil_pd(val) _mm256_round_pd((val), 0x0A);
#define _mm256_floor_pd(val) _mm256_round_pd((val), 0x09);
/*
* Round Packed Single-Precision Floating-Point Values
* **** VROUNDPS ymm1,ymm2/m256,imm8
* Round the four single-precision floating-point values values in the source
* operand by the rounding mode specified in the immediate operand and place
* the result in the destination. The rounding process rounds the input to an
* integral value and returns the result as a double-precision floating-point
* value. The Precision Floating Point Exception is signaled according to the
* immediate operand. If any source operand is an SNaN then it will be
* converted to a QNaN.
*/
//用法与_mm256_round_pd相同
extern __m256 __cdecl _mm256_round_ps(__m256 a, int iRoundMode);
#define _mm256_ceil_ps(val) _mm256_round_ps((val), 0x0A);
#define _mm256_floor_ps(val) _mm256_round_ps((val), 0x09);
/*
* Unpack and Interleave High Packed Double-Precision Floating-Point Values
* **** VUNPCKHPD ymm1,ymm2,ymm3/m256
* Performs an interleaved unpack of the high double-precision floating-point
* values from the first source operand and the second source operand.
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r=(m11, m21, m13, m23)
extern __m256d __cdecl _mm256_unpackhi_pd(__m256d m1, __m256d m2);
/*
* Unpack and Interleave High Packed Single-Precision Floating-Point Values
* **** VUNPCKHPS ymm1,ymm2,ymm3
* Performs an interleaved unpack of the high single-precision floating-point
* values from the first source operand and the second source operand
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r=(m12, m22, m13, m23, m16, m26, m17, m27)
extern __m256 __cdecl _mm256_unpackhi_ps(__m256 m1, __m256 m2);
/*
* Unpack and Interleave Low Packed Double-Precision Floating-Point Values
* **** VUNPCKLPD ymm1,ymm2,ymm3/m256
* Performs an interleaved unpack of the low double-precision floating-point
* values from the first source operand and the second source operand
*/
//m1=(m10, m11, m12, m13), m2=(m20, m21, m22, m23)
//则r=(m10, m20, m12, m22)
extern __m256d __cdecl _mm256_unpacklo_pd(__m256d m1, __m256d m2);
/*
* Unpack and Interleave Low Packed Single-Precision Floating-Point Values
* **** VUNPCKLPS ymm1,ymm2,ymm3
* Performs an interleaved unpack of the low single-precision floating-point
* values from the first source operand and the second source operand
*/
//m1=(m10, m11, ..., m17), m2=(m20, m21, ..., m27)
//则r=(m10, m20, m11, m21, m14, m24, m15, m25)
extern __m256 __cdecl _mm256_unpacklo_ps(__m256 m1, __m256 m2);
/*
* Packed Bit Test
* **** VPTEST ymm1, ymm2/m256
* VPTEST set the ZF flag if all bits in the result are 0 of the bitwise AND
* of the first source operand and the second source operand. VPTEST sets the
* CF flag if all bits in the result are 0 of the bitwise AND of the second
* source operand and the logical NOT of the destination.
*/
extern int __cdecl _mm256_testz_si256(__m256i s1, __m256i s2);
extern int __cdecl _mm256_testc_si256(__m256i s1, __m256i s2);
extern int __cdecl _mm256_testnzc_si256(__m256i s1, __m256i s2);
/*
* Packed Bit Test
* **** VTESTPD ymm1, ymm2/m256
* **** VTESTPD xmm1, xmm2/m128
* VTESTPD performs a bitwise comparison of all the sign bits of the
* double-precision elements in the first source operation and corresponding
* sign bits in the second source operand. If the AND of the two sets of bits
* produces all zeros, the ZF is set else the ZF is clear. If the AND NOT of
* the source sign bits with the dest sign bits produces all zeros the CF is
* set else the CF is clear
*/
extern int __cdecl _mm256_testz_pd(__m256d s1, __m256d s2);
extern int __cdecl _mm256_testc_pd(__m256d s1, __m256d s2);
extern int __cdecl _mm256_testnzc_pd(__m256d s1, __m256d s2);
extern int __cdecl _mm_testz_pd(__m128d s1, __m128d s2);
extern int __cdecl _mm_testc_pd(__m128d s1, __m128d s2);
extern int __cdecl _mm_testnzc_pd(__m128d s1, __m128d s2);
/*
* Packed Bit Test
* **** VTESTPS ymm1, ymm2/m256
* **** VTESTPS xmm1, xmm2/m128
* VTESTPS performs a bitwise comparison of all the sign bits of the packed
* single-precision elements in the first source operation and corresponding
* sign bits in the second source operand. If the AND of the two sets of bits
* produces all zeros, the ZF is set else the ZF is clear. If the AND NOT of
* the source sign bits with the dest sign bits produces all zeros the CF is
* set else the CF is clear
*/
extern int __cdecl _mm256_testz_ps(__m256 s1, __m256 s2);
extern int __cdecl _mm256_testc_ps(__m256 s1, __m256 s2);
extern int __cdecl _mm256_testnzc_ps(__m256 s1, __m256 s2);
extern int __cdecl _mm_testz_ps(__m128 s1, __m128 s2);
extern int __cdecl _mm_testc_ps(__m128 s1, __m128 s2);
extern int __cdecl _mm_testnzc_ps(__m128 s1, __m128 s2);
/*
* Extract Double-Precision Floating-Point Sign mask
* **** VMOVMSKPD r32, ymm2
* Extracts the sign bits from the packed double-precision floating-point
* values in the source operand, formats them into a 4-bit mask, and stores
* the mask in the destination
*/
extern int __cdecl _mm256_movemask_pd(__m256d a);
/*
* Extract Single-Precision Floating-Point Sign mask
* **** VMOVMSKPS r32, ymm2
* Extracts the sign bits from the packed single-precision floating-point
* values in the source operand, formats them into a 8-bit mask, and stores
* the mask in the destination
*/
extern int __cdecl _mm256_movemask_ps(__m256 a);
/*
* Return 256-bit vector with all elements set to 0
*/
//则r0=r1=...=rn=0
extern __m256d __cdecl _mm256_setzero_pd(void);
extern __m256 __cdecl _mm256_setzero_ps(void);
extern __m256i __cdecl _mm256_setzero_si256(void);
/*
* Return 256-bit vector intialized to specified arguments
*/
//则r = (d, c, b, a)
extern __m256d __cdecl _mm256_set_pd(double a, double b, double c, double d);
extern __m256 __cdecl _mm256_set_ps(float, float, float, float, float, float, float, float);
extern __m256i __cdecl _mm256_set_epi8(char, char, char, char, char, char, char, char,
char, char, char, char, char, char, char, char,
char, char, char, char, char, char, char, char,
char, char, char, char, char, char, char, char);
extern __m256i __cdecl _mm256_set_epi16(short, short, short, short, short, short, short, short,
short, short, short, short, short, short, short, short);
extern __m256i __cdecl _mm256_set_epi32(int, int, int, int, int, int, int, int);
extern __m256i __cdecl _mm256_set_epi64x(long long, long long, long long, long long);
//则r = (a, b, c, d)
extern __m256d __cdecl _mm256_setr_pd(double a, double b, double c, double d);
extern __m256 __cdecl _mm256_setr_ps(float, float, float, float, float, float, float, float);
extern __m256i __cdecl _mm256_setr_epi8(char, char, char, char, char, char, char, char,
char, char, char, char, char, char, char, char,
char, char, char, char, char, char, char, char,
char, char, char, char, char, char, char, char);
extern __m256i __cdecl _mm256_setr_epi16(short, short, short, short, short, short, short, short,
short, short, short, short, short, short, short, short);
extern __m256i __cdecl _mm256_setr_epi32(int, int, int, int, int, int, int, int);
extern __m256i __cdecl _mm256_setr_epi64x(long long, long long, long long, long long);
/*
* Return 256-bit vector with all elements intialized to specified scalar
*/
//则r0 = ... = rn = a
extern __m256d __cdecl _mm256_set1_pd(double a);
extern __m256 __cdecl _mm256_set1_ps(float);
extern __m256i __cdecl _mm256_set1_epi8(char);
extern __m256i __cdecl _mm256_set1_epi16(short);
extern __m256i __cdecl _mm256_set1_epi32(int);
extern __m256i __cdecl _mm256_set1_epi64x(long long);
/*
* Support intrinsics to do vector type casts. These intrinsics do not introduce
* extra moves to generated code. When cast is done from a 128 to 256-bit type
* the low 128 bits of the 256-bit result contain source parameter value; the
* upper 128 bits of the result are undefined
*/
//类型转换
extern __m256 __cdecl _mm256_castpd_ps(__m256d a);
extern __m256d __cdecl _mm256_castps_pd(__m256 a);
extern __m256i __cdecl _mm256_castps_si256(__m256 a);
extern __m256i __cdecl _mm256_castpd_si256(__m256d a);
extern __m256 __cdecl _mm256_castsi256_ps(__m256i a);
extern __m256d __cdecl _mm256_castsi256_pd(__m256i a);
extern __m128 __cdecl _mm256_castps256_ps128(__m256 a);
extern __m128d __cdecl _mm256_castpd256_pd128(__m256d a);
extern __m128i __cdecl _mm256_castsi256_si128(__m256i a);
extern __m256 __cdecl _mm256_castps128_ps256(__m128 a);
extern __m256d __cdecl _mm256_castpd128_pd256(__m128d a);
extern __m256i __cdecl _mm256_castsi128_si256(__m128i a);
/* Start of new intrinsics for Dev10 SP1
*
* The list of extended control registers.
* Currently, the list includes only one register.
*/
#define _XCR_XFEATURE_ENABLED_MASK 0
/* Returns the content of the specified extended control register */
extern unsigned __int64 __cdecl _xgetbv(unsigned int ext_ctrl_reg);
/* Writes the value to the specified extended control register */
extern void __cdecl _xsetbv(unsigned int ext_ctrl_reg, unsigned __int64 val);
/*
* Performs a full or partial save of the enabled processor state components
* using the the specified memory address location and a mask.
*/
extern void __cdecl _xsave(void *mem, unsigned __int64 save_mask);
extern void __cdecl _xsave64(void *mem, unsigned __int64 save_mask);
/*
* Performs a full or partial save of the enabled processor state components
* using the the specified memory address location and a mask.
* Optimize the state save operation if possible.
*/
extern void __cdecl _xsaveopt(void *mem, unsigned __int64 save_mask);
extern void __cdecl _xsaveopt64(void *mem, unsigned __int64 save_mask);
/*
* Performs a full or partial restore of the enabled processor states
* using the state information stored in the specified memory address location
* and a mask.
*/
extern void __cdecl _xrstor(void *mem, unsigned __int64 restore_mask);
extern void __cdecl _xrstor64(void *mem, unsigned __int64 restore_mask);
/*
* Saves the current state of the x87 FPU, MMX technology, XMM,
* and MXCSR registers to the specified 512-byte memory location.
*/
extern void __cdecl _fxsave(void *mem);
extern void __cdecl _fxsave64(void *mem);
/*
* Restore the current state of the x87 FPU, MMX technology, XMM,
* and MXCSR registers from the specified 512-byte memory location.
*/
extern void __cdecl _fxrstor(void *mem);
extern void __cdecl _fxrstor64(void *mem);