MTK6735 android 驱动修改模块

MTK6735 android 驱动修改模块
bootable目录
#if 1 /* long press reset settings are moved to default.mak and cust_bldr.mak /
#define KPD_PMIC_LPRST_TD 0 / timeout period. 0: 8sec; 1: 11sec; 2: 14sec; 3: 5sec */
#define ONEKEY_REBOOT_NORMAL_MODE_PL

bootbale文件夹里面修改了3个文件

/home/tweb/Project/Code/blps-back/bootable/bootloader/preloader/custom/lentk6735_65c_l1/inc/cust_rtc.h
#define RTC_2SEC_REBOOT_ENABLE 0 //1

/home/tweb/Project/Code/blps-back/bootable/bootloader/preloader/custom/lentk6735_65c_l1/inc/custom_MemoryDevice.h
#define CS_PART_NUMBER[1] H9TQ17ABJTACUR_KUM
//#define CS_PART_NUMBER[1] KMQ7X000SA_B315
/home/tweb/Project/Code/blps-back/bootable/bootloader/preloader/tools/emigen/MT6735/beifen/161027_BeforeUseChunmao/MemoryDeviceList_MT6735.xls:这一部工具的改动，
/home/tweb/Project/Code/blps-back/bootable/bootloader/preloader/platform/mt6735/src/drivers/inc/keypad.h
#if 1 /* long press reset settings are moved to default.mak and cust_bldr.mak /
#define KPD_PMIC_LPRST_TD 0 / timeout period. 0: 8sec; 1: 11sec; 2: 14sec; 3: 5sec */
#define ONEKEY_REBOOT_NORMAL_MODE_PL

framworks：修改了一个文件：
/home/tweb/Project/Code/blps-back/frameworks/base/core/res/res/values/config.xml
3

hardware 目录没有修改

kernel-3.10：
/home/tweb/Project/Code/blps_new_comple_ok/kernel-3.10/drivers/misc/mediatek/mach/mt6735/lentk6735_65c_l1/keypad/mtk_kpd.h
#define KPD_PMIC_LPRST_TD 0 //add by dh

/home/tweb/Project/Code/blps_new_comple_ok/kernel-3.10/drivers/misc/mediatek/mach/mt6735/lentk6735_65c_l1/dct/dct/cust_adc.dtsi ：这里面之修改了日期，具体内容都没有修改

/home/tweb/Project/Code/blps_new_comple_ok/kernel-3.10/drivers/mmc/core/mmc.c
if (card->ext_csd.rev > 8) {

system：
/home/tweb/Project/Code/blps-back/system/core/rootdir/init.rc
#Modi by LDH for purling
mkdir /storage/sdcard0/purling 0775 system system
mkdir /storage/sdcard0/purling/db 0775 system system

#Modi by LDH for purling
service purld /system/bin/purling
class core
user root
critical

Vendor
/home/tweb/Project/Code/blps-back/vendor/mediatek/proprietary/factory/src/test/ftm_gps.c
else if(
( (strncmp(GP, “$GN",2)==0)||(strncmp(GP,"$GP”, 2) == 0) ||(strncmp(GP, “$GL”, 2) == 0) ) && (strlen(GP) > 10)
)//LDH
{