华为路由器和交换机恢复出厂配置实操
//用户视图下输入重置交换机配置命令
//提示将删除交换机当前配置文件，是否继续，输入Y
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y
//提示配置文件删除已清除
Warning: Now clearing the configuration in the device.
Jan 3 2024 16:59:07-08:00 sw1 %%01CFM/4/RST_CFG(l)[1]:The user chose Y when dec
iding whether to reset the saved configuration.
Info: Succeeded in clearing the configuration in the device.
//用户视图下输入交换机重启命令
Info: The system is now comparing the configuration, please wait.
Warning: All the configuration will be saved to the configuration file for the n
//输入N，回车继续
ext startup:, Continue?[Y/N]:n
Info: If want to reboot with saving diagnostic information, input 'N' and then e
xecute 'reboot save diagnostic-information'.
//继续执行重启命令
System will reboot! Continue?[Y/N]:y
Jan 3 2024 16:59:42-08:00 sw1 %%01CMD/4/REBOOT(l)[2]:The user chose Y when deci
ding whether to reboot the system. (Task=co0, Ip=**, User=**)
//重启完成，已恢复出厂配置
小编，经过真机实操和仿真实验，确认以上命令易操作，可实现。
！！！特别提醒：在恢复出厂设置一定要提前备份设备配置，避免配置丢失造成其他损失。