superman超哥
superman超哥

Ceph分布式集群部署01

Ceph分布式集群部署01

1.Ceph环境准备

主机名 ip地址及磁盘 部署组件
node01 192.168.1.181（三块硬盘） Mon、mgr、rgs、osd
node02 192.168.1.182（三块硬盘） Mon、mgr、rgs、osd
node03 192.168.1.183（三块硬盘） Mon、mgr、rgs、osd

2.Hosts及防火墙设置

node01、node02、node03节点进行如下配置：

添加hosts解析；

[root@node01 ~]# cat >/etc/hosts<

临时关闭selinux和防火墙；

[root@node01 ~]# sed -i '/SELINUX/s/enforcing/disabled/g' /etc/sysconfig/selinux

[root@node01 ~]# setenforce 0

[root@node01 ~]# systemctl stop firewalld.service

[root@node01 ~]# systemctl disable firewalld.service

同步节点时间

[root@node01 ~]# yum install ntpdate -y

[root@node01 ~]# ntpdate pool.ntp.org

3.配置Ceph国内基础、EPEL和ceph yum源

配置epel yum源

[root@node01 ~]# yum install -y epel-release

使用阿里开源镜像提供的epel源

[root@node01 ~]# cd /etc/yum.repos.d

[root@node01 ~]# wget -O /etc/yum.repos.d/epel-7.repo http://mirrors.aliyun.com/repo/epel-7.repo

配置ceph yum源

[root@node01 ~]# echo "[noarch]

name=ceph noarch

baseurl=https://mirrors.aliyun.com/ceph/rpm-nautilus/el7/noarch

enabled=1

gpgcheck=0

[x86_64]

name=ceph x86_64

baseurl=https://mirrors.aliyun.com/ceph/rpm-nautilus/el7/x86_64

enabled=1

gpgcheck=0" > /etc/yum.repos.d/ceph.repo

4.在部署机上安装ceph-deploy（2.0版本+）

[root@node01 ~]# yum -y install ceph-deploy python-setuptools

[root@node01 ~]# yum install ceph-deploy python-setuptools
 Loaded plugins: fastestmirror, langpacks
 Repository epel is listed more than once in the configuration
 Repository epel-debuginfo is listed more than once in the configuration
 Repository epel-source is listed more than once in the configuration
 Loading mirror speeds from cached hostfile
 ​


    

  • base: mirrors.aliyun.com
    • 

  • extras: mirrors.aliyun.com
    • 

  • updates: mirror.bit.edu.cn
     base | 3.6 kB 00:00:00
     epel | 4.7 kB 00:00:00
     extras | 2.9 kB 00:00:00
     noarch | 1.5 kB 00:00:00
     updates | 2.9 kB 00:00:00
     x86_64 | 1.5 kB 00:00:00
     (1/3): epel/x86_64/group_gz | 95 kB 00:00:00
     (2/3): epel/x86_64/updateinfo | 1.0 MB 00:00:00
     (3/3): epel/x86_64/primary_db | 6.9 MB 00:00:01
     Package python-setuptools-0.9.8-7.el7.noarch already installed and latest version
     Resolving Dependencies
     --> Running transaction check
     ---> Package ceph-deploy.noarch 0:2.0.1-0 will be installed
     --> Finished Dependency Resolution
     ​
     Dependencies Resolved
     ​
     =======================================================================================
     ​
     Package Arch Version Repository Size
     =======================================================================================
     ​
     Installing:
     ceph-deploy noarch 2.0.1-0 noarch 286 k
     ​
     Transaction Summary
     =======================================================================================
     ​
     Install 1 Package
     ​
     Total download size: 286 k
     Installed size: 1.2 M
     Is this ok [y/d/N]: y
     Downloading packages:
     ceph-deploy-2.0.1-0.noarch.rpm | 286 kB 00:00:00
     Running transaction check
     Running transaction test
     Transaction test succeeded
     Running transaction
     Installing : ceph-deploy-2.0.1-0.noarch 1/1
     Verifying : ceph-deploy-2.0.1-0.noarch 1/1
     ​
     Installed:
     ceph-deploy.noarch 0:2.0.1-0
     ​
     Complete!
     [root@node01 ~]#
     [root@node01 ~]# rpm -qa|grep ceph-deploy
     ceph-deploy-2.0.1-0.noarch
     [root@node01 ~]# rpm -qa|grep python-setuptools
     python-setuptools-0.9.8-7.el7.noarch
     [root@node01 ~]#

5.更新其余节点的yum源

[root@node01 ~]# for host in node{02..03};do scp -r /etc/yum.repos.d/* $host:/etc/yum.repos.d/ ;done

[root@node01 ~]# for host in node{02..03};do scp -r /etc/yum.repos.d/* $host:/etc/yum.repos.d;done
 The authenticity of host 'node02 (192.168.1.182)' can't be established.
 ECDSA key fingerprint is SHA256:V1WcZifyTKUtNITjoIv89siGUFa/aRKqhVbuSZo44IA.
 ECDSA key fingerprint is MD5:cb:08:52:c5:43:7c:fe:77:88:7e:cb:e3:4b:1b:26:ab.
 Are you sure you want to continue connecting (yes/no)? yes
 Warning: Permanently added 'node02,192.168.1.182' (ECDSA) to the list of known hosts.
 root@node02's password:
 Permission denied, please try again.
 root@node02's password:
 CentOS-Base.repo 100% 1664 2.1MB/s 00:00
 CentOS-CR.repo 100% 1309 1.5MB/s 00:00
 CentOS-Debuginfo.repo 100% 649 741.5KB/s 00:00
 CentOS-fasttrack.repo 100% 314 562.5KB/s 00:00
 CentOS-Media.repo 100% 630 1.0MB/s 00:00
 CentOS-Sources.repo 100% 1331 2.3MB/s 00:00
 CentOS-Vault.repo 100% 5701 8.8MB/s 00:00
 ceph.repo 100% 231 492.4KB/s 00:00
 epel-7.repo 100% 664 1.1MB/s 00:00
 epel.repo 100% 951 2.0MB/s 00:00
 epel-testing.repo 100% 1050 1.9MB/s 00:00
 The authenticity of host 'node03 (192.168.1.183)' can't be established.
 ECDSA key fingerprint is SHA256:+J7KpBTku/CAcO+EjEyryEF0BuUaaDlKwxpimaJY0Qk.
 ECDSA key fingerprint is MD5:b0:88:a3:db:50:1a:bd:6b:6b:0a:cf:7a:a2:81:38:c7.
 Are you sure you want to continue connecting (yes/no)? yes
 Warning: Permanently added 'node03,192.168.1.183' (ECDSA) to the list of known hosts.
 root@node03's password:
 CentOS-Base.repo 100% 1664 2.0MB/s 00:00
 CentOS-CR.repo 100% 1309 1.4MB/s 00:00
 CentOS-Debuginfo.repo 100% 649 555.0KB/s 00:00
 CentOS-fasttrack.repo 100% 314 338.7KB/s 00:00
 CentOS-Media.repo 100% 630 892.6KB/s 00:00
 CentOS-Sources.repo 100% 1331 2.1MB/s 00:00
 CentOS-Vault.repo 100% 5701 7.3MB/s 00:00
 ceph.repo 100% 231 325.5KB/s 00:00
 epel-7.repo 100% 664 1.0MB/s 00:00
 epel.repo 100% 951 1.6MB/s 00:00
 epel-testing.repo 100% 1050 1.9MB/s 00:00
 [root@node01 ~]#

6.在node01上安装相关包

[root@node01 ~]# for host in node{01..03};do ssh -l root $host yum install ceph ceph-radosgw -y ;done

[root@node01 ~]# ceph -v

[root@node01 ~]# rpm -qa |grep ceph

[root@node01 ~]# for host in node{01..03};do ssh -l root $host yum install ceph ceph-radosgw -y;done
 The authenticity of host 'node01 (192.168.1.181)' can't be established.
 ECDSA key fingerprint is SHA256:QfJ3r+TUqEFfG/D3a8YYN5twm0IT1vCI5OtIm28GX+M.
 ECDSA key fingerprint is MD5:1f:36:26:8d:d8:63:81:9f:d6:30:a2:ed:ba:fb:db:ba.
 Are you sure you want to continue connecting (yes/no)? yes
 Warning: Permanently added 'node01,192.168.1.181' (ECDSA) to the list of known hosts.
 root@node01's password:
 Loaded plugins: fastestmirror, langpacks
 Loading mirror speeds from cached hostfile
 Repository epel is listed more than once in the configuration
 Repository epel-debuginfo is listed more than once in the configuration
 Repository epel-source is listed more than once in the configuration


    

  • base: mirrors.aliyun.com
    • 

  • extras: mirrors.aliyun.com
    • 

  • updates: mirror.bit.edu.cn
     Resolving Dependencies
     --> Running transaction check
     ---> Package ceph.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: ceph-mon = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-osd = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-mds = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-mgr = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     ---> Package ceph-radosgw.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: librgw2 = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-selinux = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-base = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librados2 = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librados.so.2(LIBRADOS_14.2.0)(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: liboath.so.0()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: libceph-common.so.0()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librabbitmq.so.4()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Running transaction check
     ---> Package ceph-base.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: libcephfs2 = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: librbd1 = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-common = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: libleveldb.so.1()(64bit) for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: liblttng-ust.so.0()(64bit) for package: 2:ceph-base-14.2.12-0.el7.x86_64
     ---> Package ceph-mds.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-mgr.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: python-pecan for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-cherrypy for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-werkzeug for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-bcrypt for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     ---> Package ceph-mon.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-osd.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-selinux.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: selinux-policy-base >= 3.13.1-252.el7_7.6 for package: 2:ceph-selinux-14.2.12-0.el7.x86_64
     ---> Package liboath.x86_64 0:2.6.2-1.el7 will be installed
     ---> Package librabbitmq.x86_64 0:0.8.0-2.el7 will be installed
     ---> Package librados2.x86_64 1:10.2.5-4.el7 will be updated
     ---> Package librados2.x86_64 2:14.2.12-0.el7 will be an update
     ---> Package librgw2.x86_64 2:14.2.12-0.el7 will be installed
     --> Running transaction check
     ---> Package ceph-common.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: python-rgw = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libradosstriper1 = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-ceph-argparse = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-rbd = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-cephfs = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-rados = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-prettytable for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libbabeltrace-ctf.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: librdkafka.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libbabeltrace.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libradosstriper.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     ---> Package leveldb.x86_64 0:1.12.0-11.el7 will be installed
     ---> Package libcephfs2.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package librbd1.x86_64 1:10.2.5-4.el7 will be updated
     ---> Package librbd1.x86_64 2:14.2.12-0.el7 will be an update
     ---> Package lttng-ust.x86_64 0:2.4.1-4.el7 will be installed
     --> Processing Dependency: liburcu-bp.so.1()(64bit) for package: lttng-ust-2.4.1-4.el7.x86_64
     --> Processing Dependency: liburcu-cds.so.1()(64bit) for package: lttng-ust-2.4.1-4.el7.x86_64
     ---> Package python-cherrypy.noarch 0:3.2.2-4.el7 will be installed
     ---> Package python-pecan.noarch 0:0.4.5-2.el7 will be installed
     --> Processing Dependency: python-mako >= 0.4.0 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-simplegeneric >= 0.8 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-webob >= 1.2 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-webtest >= 1.3.1 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-singledispatch for package: python-pecan-0.4.5-2.el7.noarch
     ---> Package python-werkzeug.noarch 0:0.9.1-2.el7 will be installed
     ---> Package python2-bcrypt.x86_64 0:3.1.6-2.el7 will be installed
     --> Processing Dependency: python2-six for package: python2-bcrypt-3.1.6-2.el7.x86_64
     ---> Package selinux-policy-targeted.noarch 0:3.13.1-229.el7 will be updated
     ---> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1 will be an update
     --> Processing Dependency: selinux-policy = 3.13.1-266.el7_8.1 for package: selinux-policy-targeted-3.13.1-266.el7_8.1.noarch
     --> Processing Dependency: selinux-policy = 3.13.1-266.el7_8.1 for package: selinux-policy-targeted-3.13.1-266.el7_8.1.noarch
     --> Running transaction check
     ---> Package libbabeltrace.x86_64 0:1.2.4-3.el7 will be installed
     ---> Package libradosstriper1.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package librdkafka.x86_64 0:0.11.5-1.el7 will be installed
     ---> Package python-ceph-argparse.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-cephfs.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-mako.noarch 0:0.8.1-2.el7 will be installed
     --> Processing Dependency: python-markupsafe for package: python-mako-0.8.1-2.el7.noarch
     --> Processing Dependency: python-beaker for package: python-mako-0.8.1-2.el7.noarch
     ---> Package python-prettytable.noarch 0:0.7.2-3.el7 will be installed
     ---> Package python-rados.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-rbd.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-rgw.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-simplegeneric.noarch 0:0.8-7.el7 will be installed
     ---> Package python-singledispatch.noarch 0:3.4.0.2-2.el7 will be installed
     ---> Package python-webob.noarch 0:1.2.3-7.el7 will be installed
     ---> Package python-webtest.noarch 0:1.3.4-6.el7 will be installed
     ---> Package python2-six.noarch 0:1.9.0-0.el7 will be installed
     ---> Package selinux-policy.noarch 0:3.13.1-229.el7 will be updated
     ---> Package selinux-policy.noarch 0:3.13.1-266.el7_8.1 will be an update
     ---> Package userspace-rcu.x86_64 0:0.7.16-1.el7 will be installed
     --> Running transaction check
     ---> Package python-beaker.noarch 0:1.5.4-10.el7 will be installed
     --> Processing Dependency: python-paste for package: python-beaker-1.5.4-10.el7.noarch
     ---> Package python-markupsafe.x86_64 0:0.11-10.el7 will be installed
     --> Running transaction check
     ---> Package python-paste.noarch 0:1.7.5.1-9.20111221hg1498.el7 will be installed
     --> Processing Dependency: python-tempita for package: python-paste-1.7.5.1-9.20111221hg1498.el7.noarch
     --> Running transaction check
     ---> Package python-tempita.noarch 0:0.5.1-6.el7 will be installed
     --> Finished Dependency Resolution
     ​
     Dependencies Resolved
     ​
     ================================================================================
     Package Arch Version Repository
     Size
     ================================================================================
     Installing:
     ceph x86_64 2:14.2.12-0.el7 x86_64 3.0 k
     ceph-radosgw x86_64 2:14.2.12-0.el7 x86_64 5.8 M
     Installing for dependencies:
     ceph-base x86_64 2:14.2.12-0.el7 x86_64 5.4 M
     ceph-common x86_64 2:14.2.12-0.el7 x86_64 19 M
     ceph-mds x86_64 2:14.2.12-0.el7 x86_64 1.9 M
     ceph-mgr x86_64 2:14.2.12-0.el7 x86_64 1.7 M
     ceph-mon x86_64 2:14.2.12-0.el7 x86_64 4.3 M
     ceph-osd x86_64 2:14.2.12-0.el7 x86_64 16 M
     ceph-selinux x86_64 2:14.2.12-0.el7 x86_64 21 k
     leveldb x86_64 1.12.0-11.el7 epel 161 k
     libbabeltrace x86_64 1.2.4-3.el7 epel 147 k
     libcephfs2 x86_64 2:14.2.12-0.el7 x86_64 500 k
     liboath x86_64 2.6.2-1.el7 epel 51 k
     librabbitmq x86_64 0.8.0-2.el7 base 37 k
     libradosstriper1 x86_64 2:14.2.12-0.el7 x86_64 362 k
     librdkafka x86_64 0.11.5-1.el7 epel 368 k
     librgw2 x86_64 2:14.2.12-0.el7 x86_64 5.1 M
     lttng-ust x86_64 2.4.1-4.el7 epel 176 k
     python-beaker noarch 1.5.4-10.el7 base 80 k
     python-ceph-argparse x86_64 2:14.2.12-0.el7 x86_64 36 k
     python-cephfs x86_64 2:14.2.12-0.el7 x86_64 112 k
     python-cherrypy noarch 3.2.2-4.el7 base 422 k
     python-mako noarch 0.8.1-2.el7 base 307 k
     python-markupsafe x86_64 0.11-10.el7 base 25 k
     python-paste noarch 1.7.5.1-9.20111221hg1498.el7 base 866 k
     python-pecan noarch 0.4.5-2.el7 epel 255 k
     python-prettytable noarch 0.7.2-3.el7 base 37 k
     python-rados x86_64 2:14.2.12-0.el7 x86_64 200 k
     python-rbd x86_64 2:14.2.12-0.el7 x86_64 195 k
     python-rgw x86_64 2:14.2.12-0.el7 x86_64 78 k
     python-simplegeneric noarch 0.8-7.el7 epel 12 k
     python-singledispatch noarch 3.4.0.2-2.el7 epel 18 k
     python-tempita noarch 0.5.1-6.el7 base 33 k
     python-webob noarch 1.2.3-7.el7 base 202 k
     python-webtest noarch 1.3.4-6.el7 base 102 k
     python-werkzeug noarch 0.9.1-2.el7 extras 562 k
     python2-bcrypt x86_64 3.1.6-2.el7 epel 39 k
     python2-six noarch 1.9.0-0.el7 epel 2.9 k
     userspace-rcu x86_64 0.7.16-1.el7 epel 73 k
     Updating for dependencies:
     librados2 x86_64 2:14.2.12-0.el7 x86_64 3.4 M
     librbd1 x86_64 2:14.2.12-0.el7 x86_64 1.7 M
     selinux-policy noarch 3.13.1-266.el7_8.1 updates 497 k
     selinux-policy-targeted noarch 3.13.1-266.el7_8.1 updates 7.0 M
     ​
     Transaction Summary
     ================================================================================
     Install 2 Packages (+37 Dependent packages)
     Upgrade ( 4 Dependent packages)
     ​
     Total size: 77 M
     Total download size: 70 M
     Downloading packages:
     No Presto metadata available for x86_64
    • 





Total 4.3 MB/s | 70 MB 00:16
 Running transaction check
 Running transaction test
 Transaction test succeeded
 Running transaction
 Installing : leveldb-1.12.0-11.el7.x86_64 1/47
 Installing : liboath-2.6.2-1.el7.x86_64 2/47
 Installing : librabbitmq-0.8.0-2.el7.x86_64 3/47
 Installing : python-webob-1.2.3-7.el7.noarch 4/47
 Installing : 2:python-ceph-argparse-14.2.12-0.el7.x86_64 5/47
 Installing : python-webtest-1.3.4-6.el7.noarch 6/47
 Installing : python-tempita-0.5.1-6.el7.noarch 7/47
 Installing : python-paste-1.7.5.1-9.20111221hg1498.el7.noarch 8/47
 Installing : python-beaker-1.5.4-10.el7.noarch 9/47
 Installing : python-cherrypy-3.2.2-4.el7.noarch 10/47
 Installing : python-werkzeug-0.9.1-2.el7.noarch 11/47
 Installing : librdkafka-0.11.5-1.el7.x86_64 12/47
 Installing : python-markupsafe-0.11-10.el7.x86_64 13/47
 Installing : python-mako-0.8.1-2.el7.noarch 14/47
 Installing : python-singledispatch-3.4.0.2-2.el7.noarch 15/47
 Updating : selinux-policy-3.13.1-266.el7_8.1.noarch 16/47
 Updating : selinux-policy-targeted-3.13.1-266.el7_8.1.noarch 17/47
 Installing : libbabeltrace-1.2.4-3.el7.x86_64 18/47
 Installing : python-simplegeneric-0.8-7.el7.noarch 19/47
 Installing : python-pecan-0.4.5-2.el7.noarch 20/47
 Installing : userspace-rcu-0.7.16-1.el7.x86_64 21/47
 Installing : lttng-ust-2.4.1-4.el7.x86_64 22/47
 Updating : 2:librados2-14.2.12-0.el7.x86_64 23/47
 Installing : 2:python-rados-14.2.12-0.el7.x86_64 24/47
 Installing : 2:librgw2-14.2.12-0.el7.x86_64 25/47
 Installing : 2:libcephfs2-14.2.12-0.el7.x86_64 26/47
 Updating : 2:librbd1-14.2.12-0.el7.x86_64 27/47
 Installing : 2:python-rbd-14.2.12-0.el7.x86_64 28/47
 Installing : 2:python-cephfs-14.2.12-0.el7.x86_64 29/47
 Installing : 2:python-rgw-14.2.12-0.el7.x86_64 30/47
 Installing : 2:libradosstriper1-14.2.12-0.el7.x86_64 31/47
 Installing : python-prettytable-0.7.2-3.el7.noarch 32/47
 Installing : 2:ceph-common-14.2.12-0.el7.x86_64 33/47
 Installing : 2:ceph-base-14.2.12-0.el7.x86_64 34/47
 Installing : 2:ceph-selinux-14.2.12-0.el7.x86_64 35/47
 Installing : 2:ceph-mon-14.2.12-0.el7.x86_64 36/47
 Installing : 2:ceph-osd-14.2.12-0.el7.x86_64 37/47
 Installing : 2:ceph-mds-14.2.12-0.el7.x86_64 38/47
 Installing : python2-six-1.9.0-0.el7.noarch 39/47
 Installing : python2-bcrypt-3.1.6-2.el7.x86_64 40/47
 Installing : 2:ceph-mgr-14.2.12-0.el7.x86_64 41/47
 Installing : 2:ceph-14.2.12-0.el7.x86_64 42/47
 Installing : 2:ceph-radosgw-14.2.12-0.el7.x86_64 43/47
 Cleanup : selinux-policy-targeted-3.13.1-229.el7.noarch 44/47
 Cleanup : 1:librbd1-10.2.5-4.el7.x86_64 45/47
 Cleanup : selinux-policy-3.13.1-229.el7.noarch 46/47
 Cleanup : 1:librados2-10.2.5-4.el7.x86_64 47/47
 Verifying : liboath-2.6.2-1.el7.x86_64 1/47
 Verifying : python2-six-1.9.0-0.el7.noarch 2/47
 Verifying : 2:python-rbd-14.2.12-0.el7.x86_64 3/47
 Verifying : python-prettytable-0.7.2-3.el7.noarch 4/47
 Verifying : leveldb-1.12.0-11.el7.x86_64 5/47
 Verifying : python2-bcrypt-3.1.6-2.el7.x86_64 6/47
 Verifying : userspace-rcu-0.7.16-1.el7.x86_64 7/47
 Verifying : python-simplegeneric-0.8-7.el7.noarch 8/47
 Verifying : 2:python-cephfs-14.2.12-0.el7.x86_64 9/47
 Verifying : libbabeltrace-1.2.4-3.el7.x86_64 10/47
 Verifying : python-mako-0.8.1-2.el7.noarch 11/47
 Verifying : 2:ceph-selinux-14.2.12-0.el7.x86_64 12/47
 Verifying : selinux-policy-3.13.1-266.el7_8.1.noarch 13/47
 Verifying : 2:librgw2-14.2.12-0.el7.x86_64 14/47
 Verifying : 2:ceph-mon-14.2.12-0.el7.x86_64 15/47
 Verifying : python-pecan-0.4.5-2.el7.noarch 16/47
 Verifying : 2:ceph-radosgw-14.2.12-0.el7.x86_64 17/47
 Verifying : python-singledispatch-3.4.0.2-2.el7.noarch 18/47
 Verifying : python-markupsafe-0.11-10.el7.x86_64 19/47
 Verifying : 2:ceph-common-14.2.12-0.el7.x86_64 20/47
 Verifying : 2:libcephfs2-14.2.12-0.el7.x86_64 21/47
 Verifying : librdkafka-0.11.5-1.el7.x86_64 22/47
 Verifying : python-paste-1.7.5.1-9.20111221hg1498.el7.noarch 23/47
 Verifying : lttng-ust-2.4.1-4.el7.x86_64 24/47
 Verifying : 2:ceph-osd-14.2.12-0.el7.x86_64 25/47
 Verifying : python-werkzeug-0.9.1-2.el7.noarch 26/47
 Verifying : 2:python-rados-14.2.12-0.el7.x86_64 27/47
 Verifying : 2:libradosstriper1-14.2.12-0.el7.x86_64 28/47
 Verifying : 2:ceph-base-14.2.12-0.el7.x86_64 29/47
 Verifying : 2:ceph-mgr-14.2.12-0.el7.x86_64 30/47
 Verifying : python-cherrypy-3.2.2-4.el7.noarch 31/47
 Verifying : python-beaker-1.5.4-10.el7.noarch 32/47
 Verifying : 2:python-rgw-14.2.12-0.el7.x86_64 33/47
 Verifying : 2:librados2-14.2.12-0.el7.x86_64 34/47
 Verifying : 2:ceph-mds-14.2.12-0.el7.x86_64 35/47
 Verifying : selinux-policy-targeted-3.13.1-266.el7_8.1.noarch 36/47
 Verifying : python-tempita-0.5.1-6.el7.noarch 37/47
 Verifying : python-webtest-1.3.4-6.el7.noarch 38/47
 Verifying : 2:python-ceph-argparse-14.2.12-0.el7.x86_64 39/47
 Verifying : librabbitmq-0.8.0-2.el7.x86_64 40/47
 Verifying : 2:librbd1-14.2.12-0.el7.x86_64 41/47
 Verifying : python-webob-1.2.3-7.el7.noarch 42/47
 Verifying : 2:ceph-14.2.12-0.el7.x86_64 43/47
 Verifying : 1:librbd1-10.2.5-4.el7.x86_64 44/47
 Verifying : selinux-policy-3.13.1-229.el7.noarch 45/47
 Verifying : selinux-policy-targeted-3.13.1-229.el7.noarch 46/47
 Verifying : 1:librados2-10.2.5-4.el7.x86_64 47/47
 ​
 Installed:
 ceph.x86_64 2:14.2.12-0.el7 ceph-radosgw.x86_64 2:14.2.12-0.el7
 ​
 Dependency Installed:
 ceph-base.x86_64 2:14.2.12-0.el7
 ceph-common.x86_64 2:14.2.12-0.el7
 ceph-mds.x86_64 2:14.2.12-0.el7
 ceph-mgr.x86_64 2:14.2.12-0.el7
 ceph-mon.x86_64 2:14.2.12-0.el7
 ceph-osd.x86_64 2:14.2.12-0.el7
 ceph-selinux.x86_64 2:14.2.12-0.el7
 leveldb.x86_64 0:1.12.0-11.el7
 libbabeltrace.x86_64 0:1.2.4-3.el7
 libcephfs2.x86_64 2:14.2.12-0.el7
 liboath.x86_64 0:2.6.2-1.el7
 librabbitmq.x86_64 0:0.8.0-2.el7
 libradosstriper1.x86_64 2:14.2.12-0.el7
 librdkafka.x86_64 0:0.11.5-1.el7
 librgw2.x86_64 2:14.2.12-0.el7
 lttng-ust.x86_64 0:2.4.1-4.el7
 python-beaker.noarch 0:1.5.4-10.el7
 python-ceph-argparse.x86_64 2:14.2.12-0.el7
 python-cephfs.x86_64 2:14.2.12-0.el7
 python-cherrypy.noarch 0:3.2.2-4.el7
 python-mako.noarch 0:0.8.1-2.el7
 python-markupsafe.x86_64 0:0.11-10.el7
 python-paste.noarch 0:1.7.5.1-9.20111221hg1498.el7
 python-pecan.noarch 0:0.4.5-2.el7
 python-prettytable.noarch 0:0.7.2-3.el7
 python-rados.x86_64 2:14.2.12-0.el7
 python-rbd.x86_64 2:14.2.12-0.el7
 python-rgw.x86_64 2:14.2.12-0.el7
 python-simplegeneric.noarch 0:0.8-7.el7
 python-singledispatch.noarch 0:3.4.0.2-2.el7
 python-tempita.noarch 0:0.5.1-6.el7
 python-webob.noarch 0:1.2.3-7.el7
 python-webtest.noarch 0:1.3.4-6.el7
 python-werkzeug.noarch 0:0.9.1-2.el7
 python2-bcrypt.x86_64 0:3.1.6-2.el7
 python2-six.noarch 0:1.9.0-0.el7
 userspace-rcu.x86_64 0:0.7.16-1.el7
 ​
 Dependency Updated:
 librados2.x86_64 2:14.2.12-0.el7
 librbd1.x86_64 2:14.2.12-0.el7
 selinux-policy.noarch 0:3.13.1-266.el7_8.1
 selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1
 ​
 Complete!
 root@node02's password:
 Loaded plugins: fastestmirror, langpacks, product-id, search-disabled-repos,
 : subscription-manager
 ​
 This system is not registered with an entitlement server. You can use subscription-manager to register.
 ​
 Repository epel is listed more than once in the configuration
 Repository epel-debuginfo is listed more than once in the configuration
 Repository epel-source is listed more than once in the configuration
 Loading mirror speeds from cached hostfile


    

  • base: mirrors.aliyun.com
    • 

  • extras: mirrors.bfsu.edu.cn
    • 

  • updates: mirror.bit.edu.cn
     Resolving Dependencies
     --> Running transaction check
     ---> Package ceph.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: ceph-mon = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-osd = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-mds = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-mgr = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     ---> Package ceph-radosgw.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: librgw2 = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-selinux = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-base = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librados2 = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librados.so.2(LIBRADOS_14.2.0)(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: liboath.so.0()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: libceph-common.so.0()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librabbitmq.so.4()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Running transaction check
     ---> Package ceph-base.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: libcephfs2 = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: librbd1 = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-common = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: libleveldb.so.1()(64bit) for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: liblttng-ust.so.0()(64bit) for package: 2:ceph-base-14.2.12-0.el7.x86_64
     ---> Package ceph-mds.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-mgr.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: python-pecan for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-cherrypy for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-werkzeug for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-bcrypt for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     ---> Package ceph-mon.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-osd.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-selinux.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: selinux-policy-base >= 3.13.1-252.el7_7.6 for package: 2:ceph-selinux-14.2.12-0.el7.x86_64
     ---> Package liboath.x86_64 0:2.6.2-1.el7 will be installed
     ---> Package librabbitmq.x86_64 0:0.8.0-2.el7 will be installed
     ---> Package librados2.x86_64 1:10.2.5-4.el7 will be updated
     ---> Package librados2.x86_64 2:14.2.12-0.el7 will be an update
     ---> Package librgw2.x86_64 2:14.2.12-0.el7 will be installed
     --> Running transaction check
     ---> Package ceph-common.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: python-rgw = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libradosstriper1 = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-ceph-argparse = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-rbd = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-cephfs = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-rados = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-prettytable for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libbabeltrace-ctf.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: librdkafka.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libbabeltrace.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libradosstriper.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     ---> Package leveldb.x86_64 0:1.12.0-11.el7 will be installed
     ---> Package libcephfs2.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package librbd1.x86_64 1:10.2.5-4.el7 will be updated
     ---> Package librbd1.x86_64 2:14.2.12-0.el7 will be an update
     ---> Package lttng-ust.x86_64 0:2.4.1-4.el7 will be installed
     --> Processing Dependency: liburcu-bp.so.1()(64bit) for package: lttng-ust-2.4.1-4.el7.x86_64
     --> Processing Dependency: liburcu-cds.so.1()(64bit) for package: lttng-ust-2.4.1-4.el7.x86_64
     ---> Package python-cherrypy.noarch 0:3.2.2-4.el7 will be installed
     ---> Package python-pecan.noarch 0:0.4.5-2.el7 will be installed
     --> Processing Dependency: python-mako >= 0.4.0 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-simplegeneric >= 0.8 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-webob >= 1.2 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-webtest >= 1.3.1 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-singledispatch for package: python-pecan-0.4.5-2.el7.noarch
     ---> Package python-werkzeug.noarch 0:0.9.1-2.el7 will be installed
     ---> Package python2-bcrypt.x86_64 0:3.1.6-2.el7 will be installed
     --> Processing Dependency: python2-six for package: python2-bcrypt-3.1.6-2.el7.x86_64
     ---> Package selinux-policy-targeted.noarch 0:3.13.1-229.el7 will be updated
     ---> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1 will be an update
     --> Processing Dependency: selinux-policy = 3.13.1-266.el7_8.1 for package: selinux-policy-targeted-3.13.1-266.el7_8.1.noarch
     --> Processing Dependency: selinux-policy = 3.13.1-266.el7_8.1 for package: selinux-policy-targeted-3.13.1-266.el7_8.1.noarch
     --> Running transaction check
     ---> Package libbabeltrace.x86_64 0:1.2.4-3.el7 will be installed
     ---> Package libradosstriper1.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package librdkafka.x86_64 0:0.11.5-1.el7 will be installed
     ---> Package python-ceph-argparse.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-cephfs.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-mako.noarch 0:0.8.1-2.el7 will be installed
     --> Processing Dependency: python-markupsafe for package: python-mako-0.8.1-2.el7.noarch
     --> Processing Dependency: python-beaker for package: python-mako-0.8.1-2.el7.noarch
     ---> Package python-prettytable.noarch 0:0.7.2-3.el7 will be installed
     ---> Package python-rados.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-rbd.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-rgw.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-simplegeneric.noarch 0:0.8-7.el7 will be installed
     ---> Package python-singledispatch.noarch 0:3.4.0.2-2.el7 will be installed
     ---> Package python-webob.noarch 0:1.2.3-7.el7 will be installed
     ---> Package python-webtest.noarch 0:1.3.4-6.el7 will be installed
     ---> Package python2-six.noarch 0:1.9.0-0.el7 will be installed
     ---> Package selinux-policy.noarch 0:3.13.1-229.el7 will be updated
     ---> Package selinux-policy.noarch 0:3.13.1-266.el7_8.1 will be an update
     ---> Package userspace-rcu.x86_64 0:0.7.16-1.el7 will be installed
     --> Running transaction check
     ---> Package python-beaker.noarch 0:1.5.4-10.el7 will be installed
     --> Processing Dependency: python-paste for package: python-beaker-1.5.4-10.el7.noarch
     ---> Package python-markupsafe.x86_64 0:0.11-10.el7 will be installed
     --> Running transaction check
     ---> Package python-paste.noarch 0:1.7.5.1-9.20111221hg1498.el7 will be installed
     --> Processing Dependency: python-tempita for package: python-paste-1.7.5.1-9.20111221hg1498.el7.noarch
     --> Running transaction check
     ---> Package python-tempita.noarch 0:0.5.1-6.el7 will be installed
     --> Finished Dependency Resolution
     ​
     Dependencies Resolved
     ​
     ================================================================================
     Package Arch Version Repository
     Size
     ================================================================================
     Installing:
     ceph x86_64 2:14.2.12-0.el7 x86_64 3.0 k
     ceph-radosgw x86_64 2:14.2.12-0.el7 x86_64 5.8 M
     Installing for dependencies:
     ceph-base x86_64 2:14.2.12-0.el7 x86_64 5.4 M
     ceph-common x86_64 2:14.2.12-0.el7 x86_64 19 M
     ceph-mds x86_64 2:14.2.12-0.el7 x86_64 1.9 M
     ceph-mgr x86_64 2:14.2.12-0.el7 x86_64 1.7 M
     ceph-mon x86_64 2:14.2.12-0.el7 x86_64 4.3 M
     ceph-osd x86_64 2:14.2.12-0.el7 x86_64 16 M
     ceph-selinux x86_64 2:14.2.12-0.el7 x86_64 21 k
     leveldb x86_64 1.12.0-11.el7 epel 161 k
     libbabeltrace x86_64 1.2.4-3.el7 epel 147 k
     libcephfs2 x86_64 2:14.2.12-0.el7 x86_64 500 k
     liboath x86_64 2.6.2-1.el7 epel 51 k
     librabbitmq x86_64 0.8.0-2.el7 base 37 k
     libradosstriper1 x86_64 2:14.2.12-0.el7 x86_64 362 k
     librdkafka x86_64 0.11.5-1.el7 epel 368 k
     librgw2 x86_64 2:14.2.12-0.el7 x86_64 5.1 M
     lttng-ust x86_64 2.4.1-4.el7 epel 176 k
     python-beaker noarch 1.5.4-10.el7 base 80 k
     python-ceph-argparse x86_64 2:14.2.12-0.el7 x86_64 36 k
     python-cephfs x86_64 2:14.2.12-0.el7 x86_64 112 k
     python-cherrypy noarch 3.2.2-4.el7 base 422 k
     python-mako noarch 0.8.1-2.el7 base 307 k
     python-markupsafe x86_64 0.11-10.el7 base 25 k
     python-paste noarch 1.7.5.1-9.20111221hg1498.el7 base 866 k
     python-pecan noarch 0.4.5-2.el7 epel 255 k
     python-prettytable noarch 0.7.2-3.el7 base 37 k
     python-rados x86_64 2:14.2.12-0.el7 x86_64 200 k
     python-rbd x86_64 2:14.2.12-0.el7 x86_64 195 k
     python-rgw x86_64 2:14.2.12-0.el7 x86_64 78 k
     python-simplegeneric noarch 0.8-7.el7 epel 12 k
     python-singledispatch noarch 3.4.0.2-2.el7 epel 18 k
     python-tempita noarch 0.5.1-6.el7 base 33 k
     python-webob noarch 1.2.3-7.el7 base 202 k
     python-webtest noarch 1.3.4-6.el7 base 102 k
     python-werkzeug noarch 0.9.1-2.el7 extras 562 k
     python2-bcrypt x86_64 3.1.6-2.el7 epel 39 k
     python2-six noarch 1.9.0-0.el7 epel 2.9 k
     userspace-rcu x86_64 0.7.16-1.el7 epel 73 k
     Updating for dependencies:
     librados2 x86_64 2:14.2.12-0.el7 x86_64 3.4 M
     librbd1 x86_64 2:14.2.12-0.el7 x86_64 1.7 M
     selinux-policy noarch 3.13.1-266.el7_8.1 updates 497 k
     selinux-policy-targeted noarch 3.13.1-266.el7_8.1 updates 7.0 M
     ​
     Transaction Summary
     ================================================================================
     Install 2 Packages (+37 Dependent packages)
     Upgrade ( 4 Dependent packages)
     ​
     Total download size: 77 M
     Downloading packages:
     No Presto metadata available for x86_64
     No Presto metadata available for updates
    • 





Total 6.2 MB/s | 77 MB 00:12
 Running transaction check
 Running transaction test
 Transaction test succeeded
 Running transaction
 Installing : leveldb-1.12.0-11.el7.x86_64 1/47
 Installing : liboath-2.6.2-1.el7.x86_64 2/47
 Installing : librabbitmq-0.8.0-2.el7.x86_64 3/47
 Installing : python-webob-1.2.3-7.el7.noarch 4/47
 Installing : 2:python-ceph-argparse-14.2.12-0.el7.x86_64 5/47
 Installing : python-webtest-1.3.4-6.el7.noarch 6/47
 Installing : python-tempita-0.5.1-6.el7.noarch 7/47
 Installing : python-paste-1.7.5.1-9.20111221hg1498.el7.noarch 8/47
 Installing : python-beaker-1.5.4-10.el7.noarch 9/47
 Installing : python-cherrypy-3.2.2-4.el7.noarch 10/47
 Installing : python-werkzeug-0.9.1-2.el7.noarch 11/47
 Installing : librdkafka-0.11.5-1.el7.x86_64 12/47
 Installing : python-markupsafe-0.11-10.el7.x86_64 13/47
 Installing : python-mako-0.8.1-2.el7.noarch 14/47
 Installing : python-singledispatch-3.4.0.2-2.el7.noarch 15/47
 Updating : selinux-policy-3.13.1-266.el7_8.1.noarch 16/47
 Updating : selinux-policy-targeted-3.13.1-266.el7_8.1.noarch 17/47
 Installing : libbabeltrace-1.2.4-3.el7.x86_64 18/47
 Installing : python-simplegeneric-0.8-7.el7.noarch 19/47
 Installing : python-pecan-0.4.5-2.el7.noarch 20/47
 Installing : userspace-rcu-0.7.16-1.el7.x86_64 21/47
 Installing : lttng-ust-2.4.1-4.el7.x86_64 22/47
 Updating : 2:librados2-14.2.12-0.el7.x86_64 23/47
 Installing : 2:python-rados-14.2.12-0.el7.x86_64 24/47
 Installing : 2:librgw2-14.2.12-0.el7.x86_64 25/47
 Installing : 2:libcephfs2-14.2.12-0.el7.x86_64 26/47
 Updating : 2:librbd1-14.2.12-0.el7.x86_64 27/47
 Installing : 2:python-rbd-14.2.12-0.el7.x86_64 28/47
 Installing : 2:python-cephfs-14.2.12-0.el7.x86_64 29/47
 Installing : 2:python-rgw-14.2.12-0.el7.x86_64 30/47
 Installing : 2:libradosstriper1-14.2.12-0.el7.x86_64 31/47
 Installing : python-prettytable-0.7.2-3.el7.noarch 32/47
 Installing : 2:ceph-common-14.2.12-0.el7.x86_64 33/47
 Installing : 2:ceph-base-14.2.12-0.el7.x86_64 34/47
 Installing : 2:ceph-selinux-14.2.12-0.el7.x86_64 35/47
 Installing : 2:ceph-mon-14.2.12-0.el7.x86_64 36/47
 Installing : 2:ceph-osd-14.2.12-0.el7.x86_64 37/47
 Installing : 2:ceph-mds-14.2.12-0.el7.x86_64 38/47
 Installing : python2-six-1.9.0-0.el7.noarch 39/47
 Installing : python2-bcrypt-3.1.6-2.el7.x86_64 40/47
 Installing : 2:ceph-mgr-14.2.12-0.el7.x86_64 41/47
 Installing : 2:ceph-14.2.12-0.el7.x86_64 42/47
 Installing : 2:ceph-radosgw-14.2.12-0.el7.x86_64 43/47
 Cleanup : selinux-policy-targeted-3.13.1-229.el7.noarch 44/47
 Cleanup : 1:librbd1-10.2.5-4.el7.x86_64 45/47
 Cleanup : selinux-policy-3.13.1-229.el7.noarch 46/47
 Cleanup : 1:librados2-10.2.5-4.el7.x86_64 47/47
 Verifying : liboath-2.6.2-1.el7.x86_64 1/47
 Verifying : python2-six-1.9.0-0.el7.noarch 2/47
 Verifying : 2:python-rbd-14.2.12-0.el7.x86_64 3/47
 Verifying : python-prettytable-0.7.2-3.el7.noarch 4/47
 Verifying : leveldb-1.12.0-11.el7.x86_64 5/47
 Verifying : python2-bcrypt-3.1.6-2.el7.x86_64 6/47
 Verifying : userspace-rcu-0.7.16-1.el7.x86_64 7/47
 Verifying : python-simplegeneric-0.8-7.el7.noarch 8/47
 Verifying : 2:python-cephfs-14.2.12-0.el7.x86_64 9/47
 Verifying : libbabeltrace-1.2.4-3.el7.x86_64 10/47
 Verifying : python-mako-0.8.1-2.el7.noarch 11/47
 Verifying : 2:ceph-selinux-14.2.12-0.el7.x86_64 12/47
 Verifying : selinux-policy-3.13.1-266.el7_8.1.noarch 13/47
 Verifying : 2:librgw2-14.2.12-0.el7.x86_64 14/47
 Verifying : 2:ceph-mon-14.2.12-0.el7.x86_64 15/47
 Verifying : python-pecan-0.4.5-2.el7.noarch 16/47
 Verifying : 2:ceph-radosgw-14.2.12-0.el7.x86_64 17/47
 Verifying : python-singledispatch-3.4.0.2-2.el7.noarch 18/47
 Verifying : python-markupsafe-0.11-10.el7.x86_64 19/47
 Verifying : 2:ceph-common-14.2.12-0.el7.x86_64 20/47
 Verifying : 2:libcephfs2-14.2.12-0.el7.x86_64 21/47
 Verifying : librdkafka-0.11.5-1.el7.x86_64 22/47
 Verifying : python-paste-1.7.5.1-9.20111221hg1498.el7.noarch 23/47
 Verifying : lttng-ust-2.4.1-4.el7.x86_64 24/47
 Verifying : 2:ceph-osd-14.2.12-0.el7.x86_64 25/47
 Verifying : python-werkzeug-0.9.1-2.el7.noarch 26/47
 Verifying : 2:python-rados-14.2.12-0.el7.x86_64 27/47
 Verifying : 2:libradosstriper1-14.2.12-0.el7.x86_64 28/47
 Verifying : 2:ceph-base-14.2.12-0.el7.x86_64 29/47
 Verifying : 2:ceph-mgr-14.2.12-0.el7.x86_64 30/47
 Verifying : python-cherrypy-3.2.2-4.el7.noarch 31/47
 Verifying : python-beaker-1.5.4-10.el7.noarch 32/47
 Verifying : 2:python-rgw-14.2.12-0.el7.x86_64 33/47
 Verifying : 2:librados2-14.2.12-0.el7.x86_64 34/47
 Verifying : 2:ceph-mds-14.2.12-0.el7.x86_64 35/47
 Verifying : selinux-policy-targeted-3.13.1-266.el7_8.1.noarch 36/47
 Verifying : python-tempita-0.5.1-6.el7.noarch 37/47
 Verifying : python-webtest-1.3.4-6.el7.noarch 38/47
 Verifying : 2:python-ceph-argparse-14.2.12-0.el7.x86_64 39/47
 Verifying : librabbitmq-0.8.0-2.el7.x86_64 40/47
 Verifying : 2:librbd1-14.2.12-0.el7.x86_64 41/47
 Verifying : python-webob-1.2.3-7.el7.noarch 42/47
 Verifying : 2:ceph-14.2.12-0.el7.x86_64 43/47
 Verifying : 1:librbd1-10.2.5-4.el7.x86_64 44/47
 Verifying : selinux-policy-3.13.1-229.el7.noarch 45/47
 Verifying : selinux-policy-targeted-3.13.1-229.el7.noarch 46/47
 Verifying : 1:librados2-10.2.5-4.el7.x86_64 47/47
 ​
 Installed:
 ceph.x86_64 2:14.2.12-0.el7 ceph-radosgw.x86_64 2:14.2.12-0.el7
 ​
 Dependency Installed:
 ceph-base.x86_64 2:14.2.12-0.el7
 ceph-common.x86_64 2:14.2.12-0.el7
 ceph-mds.x86_64 2:14.2.12-0.el7
 ceph-mgr.x86_64 2:14.2.12-0.el7
 ceph-mon.x86_64 2:14.2.12-0.el7
 ceph-osd.x86_64 2:14.2.12-0.el7
 ceph-selinux.x86_64 2:14.2.12-0.el7
 leveldb.x86_64 0:1.12.0-11.el7
 libbabeltrace.x86_64 0:1.2.4-3.el7
 libcephfs2.x86_64 2:14.2.12-0.el7
 liboath.x86_64 0:2.6.2-1.el7
 librabbitmq.x86_64 0:0.8.0-2.el7
 libradosstriper1.x86_64 2:14.2.12-0.el7
 librdkafka.x86_64 0:0.11.5-1.el7
 librgw2.x86_64 2:14.2.12-0.el7
 lttng-ust.x86_64 0:2.4.1-4.el7
 python-beaker.noarch 0:1.5.4-10.el7
 python-ceph-argparse.x86_64 2:14.2.12-0.el7
 python-cephfs.x86_64 2:14.2.12-0.el7
 python-cherrypy.noarch 0:3.2.2-4.el7
 python-mako.noarch 0:0.8.1-2.el7
 python-markupsafe.x86_64 0:0.11-10.el7
 python-paste.noarch 0:1.7.5.1-9.20111221hg1498.el7
 python-pecan.noarch 0:0.4.5-2.el7
 python-prettytable.noarch 0:0.7.2-3.el7
 python-rados.x86_64 2:14.2.12-0.el7
 python-rbd.x86_64 2:14.2.12-0.el7
 python-rgw.x86_64 2:14.2.12-0.el7
 python-simplegeneric.noarch 0:0.8-7.el7
 python-singledispatch.noarch 0:3.4.0.2-2.el7
 python-tempita.noarch 0:0.5.1-6.el7
 python-webob.noarch 0:1.2.3-7.el7
 python-webtest.noarch 0:1.3.4-6.el7
 python-werkzeug.noarch 0:0.9.1-2.el7
 python2-bcrypt.x86_64 0:3.1.6-2.el7
 python2-six.noarch 0:1.9.0-0.el7
 userspace-rcu.x86_64 0:0.7.16-1.el7
 ​
 Dependency Updated:
 librados2.x86_64 2:14.2.12-0.el7
 librbd1.x86_64 2:14.2.12-0.el7
 selinux-policy.noarch 0:3.13.1-266.el7_8.1
 selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1
 ​
 Complete!
 root@node03's password:
 Loaded plugins: fastestmirror, langpacks, product-id, search-disabled-repos,
 : subscription-manager
 ​
 This system is not registered with an entitlement server. You can use subscription-manager to register.
 ​
 Repository epel is listed more than once in the configuration
 Repository epel-debuginfo is listed more than once in the configuration
 Repository epel-source is listed more than once in the configuration
 Loading mirror speeds from cached hostfile


    

  • base: mirrors.aliyun.com
    • 

  • extras: mirrors.huaweicloud.com
    • 

  • updates: mirror.bit.edu.cn
     Resolving Dependencies
     --> Running transaction check
     ---> Package ceph.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: ceph-mon = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-osd = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-mds = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-mgr = 2:14.2.12-0.el7 for package: 2:ceph-14.2.12-0.el7.x86_64
     ---> Package ceph-radosgw.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: librgw2 = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-selinux = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-base = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librados2 = 2:14.2.12-0.el7 for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librados.so.2(LIBRADOS_14.2.0)(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: liboath.so.0()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: libceph-common.so.0()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Processing Dependency: librabbitmq.so.4()(64bit) for package: 2:ceph-radosgw-14.2.12-0.el7.x86_64
     --> Running transaction check
     ---> Package ceph-base.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: libcephfs2 = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: librbd1 = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: ceph-common = 2:14.2.12-0.el7 for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: libleveldb.so.1()(64bit) for package: 2:ceph-base-14.2.12-0.el7.x86_64
     --> Processing Dependency: liblttng-ust.so.0()(64bit) for package: 2:ceph-base-14.2.12-0.el7.x86_64
     ---> Package ceph-mds.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-mgr.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: python-pecan for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-cherrypy for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-werkzeug for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-bcrypt for package: 2:ceph-mgr-14.2.12-0.el7.x86_64
     ---> Package ceph-mon.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-osd.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package ceph-selinux.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: selinux-policy-base >= 3.13.1-252.el7_7.6 for package: 2:ceph-selinux-14.2.12-0.el7.x86_64
     ---> Package liboath.x86_64 0:2.6.2-1.el7 will be installed
     ---> Package librabbitmq.x86_64 0:0.8.0-2.el7 will be installed
     ---> Package librados2.x86_64 1:10.2.5-4.el7 will be updated
     ---> Package librados2.x86_64 2:14.2.12-0.el7 will be an update
     ---> Package librgw2.x86_64 2:14.2.12-0.el7 will be installed
     --> Running transaction check
     ---> Package ceph-common.x86_64 2:14.2.12-0.el7 will be installed
     --> Processing Dependency: python-rgw = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libradosstriper1 = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-ceph-argparse = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-rbd = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-cephfs = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-rados = 2:14.2.12-0.el7 for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: python-prettytable for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libbabeltrace-ctf.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: librdkafka.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libbabeltrace.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     --> Processing Dependency: libradosstriper.so.1()(64bit) for package: 2:ceph-common-14.2.12-0.el7.x86_64
     ---> Package leveldb.x86_64 0:1.12.0-11.el7 will be installed
     ---> Package libcephfs2.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package librbd1.x86_64 1:10.2.5-4.el7 will be updated
     ---> Package librbd1.x86_64 2:14.2.12-0.el7 will be an update
     ---> Package lttng-ust.x86_64 0:2.4.1-4.el7 will be installed
     --> Processing Dependency: liburcu-bp.so.1()(64bit) for package: lttng-ust-2.4.1-4.el7.x86_64
     --> Processing Dependency: liburcu-cds.so.1()(64bit) for package: lttng-ust-2.4.1-4.el7.x86_64
     ---> Package python-cherrypy.noarch 0:3.2.2-4.el7 will be installed
     ---> Package python-pecan.noarch 0:0.4.5-2.el7 will be installed
     --> Processing Dependency: python-mako >= 0.4.0 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-simplegeneric >= 0.8 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-webob >= 1.2 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-webtest >= 1.3.1 for package: python-pecan-0.4.5-2.el7.noarch
     --> Processing Dependency: python-singledispatch for package: python-pecan-0.4.5-2.el7.noarch
     ---> Package python-werkzeug.noarch 0:0.9.1-2.el7 will be installed
     ---> Package python2-bcrypt.x86_64 0:3.1.6-2.el7 will be installed
     --> Processing Dependency: python2-six for package: python2-bcrypt-3.1.6-2.el7.x86_64
     ---> Package selinux-policy-targeted.noarch 0:3.13.1-229.el7 will be updated
     ---> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1 will be an update
     --> Processing Dependency: selinux-policy = 3.13.1-266.el7_8.1 for package: selinux-policy-targeted-3.13.1-266.el7_8.1.noarch
     --> Processing Dependency: selinux-policy = 3.13.1-266.el7_8.1 for package: selinux-policy-targeted-3.13.1-266.el7_8.1.noarch
     --> Running transaction check
     ---> Package libbabeltrace.x86_64 0:1.2.4-3.el7 will be installed
     ---> Package libradosstriper1.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package librdkafka.x86_64 0:0.11.5-1.el7 will be installed
     ---> Package python-ceph-argparse.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-cephfs.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-mako.noarch 0:0.8.1-2.el7 will be installed
     --> Processing Dependency: python-markupsafe for package: python-mako-0.8.1-2.el7.noarch
     --> Processing Dependency: python-beaker for package: python-mako-0.8.1-2.el7.noarch
     ---> Package python-prettytable.noarch 0:0.7.2-3.el7 will be installed
     ---> Package python-rados.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-rbd.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-rgw.x86_64 2:14.2.12-0.el7 will be installed
     ---> Package python-simplegeneric.noarch 0:0.8-7.el7 will be installed
     ---> Package python-singledispatch.noarch 0:3.4.0.2-2.el7 will be installed
     ---> Package python-webob.noarch 0:1.2.3-7.el7 will be installed
     ---> Package python-webtest.noarch 0:1.3.4-6.el7 will be installed
     ---> Package python2-six.noarch 0:1.9.0-0.el7 will be installed
     ---> Package selinux-policy.noarch 0:3.13.1-229.el7 will be updated
     ---> Package selinux-policy.noarch 0:3.13.1-266.el7_8.1 will be an update
     ---> Package userspace-rcu.x86_64 0:0.7.16-1.el7 will be installed
     --> Running transaction check
     ---> Package python-beaker.noarch 0:1.5.4-10.el7 will be installed
     --> Processing Dependency: python-paste for package: python-beaker-1.5.4-10.el7.noarch
     ---> Package python-markupsafe.x86_64 0:0.11-10.el7 will be installed
     --> Running transaction check
     ---> Package python-paste.noarch 0:1.7.5.1-9.20111221hg1498.el7 will be installed
     --> Processing Dependency: python-tempita for package: python-paste-1.7.5.1-9.20111221hg1498.el7.noarch
     --> Running transaction check
     ---> Package python-tempita.noarch 0:0.5.1-6.el7 will be installed
     --> Finished Dependency Resolution
     ​
     Dependencies Resolved
     ​
     ================================================================================
     Package Arch Version Repository
     Size
     ================================================================================
     Installing:
     ceph x86_64 2:14.2.12-0.el7 x86_64 3.0 k
     ceph-radosgw x86_64 2:14.2.12-0.el7 x86_64 5.8 M
     Installing for dependencies:
     ceph-base x86_64 2:14.2.12-0.el7 x86_64 5.4 M
     ceph-common x86_64 2:14.2.12-0.el7 x86_64 19 M
     ceph-mds x86_64 2:14.2.12-0.el7 x86_64 1.9 M
     ceph-mgr x86_64 2:14.2.12-0.el7 x86_64 1.7 M
     ceph-mon x86_64 2:14.2.12-0.el7 x86_64 4.3 M
     ceph-osd x86_64 2:14.2.12-0.el7 x86_64 16 M
     ceph-selinux x86_64 2:14.2.12-0.el7 x86_64 21 k
     leveldb x86_64 1.12.0-11.el7 epel 161 k
     libbabeltrace x86_64 1.2.4-3.el7 epel 147 k
     libcephfs2 x86_64 2:14.2.12-0.el7 x86_64 500 k
     liboath x86_64 2.6.2-1.el7 epel 51 k
     librabbitmq x86_64 0.8.0-2.el7 base 37 k
     libradosstriper1 x86_64 2:14.2.12-0.el7 x86_64 362 k
     librdkafka x86_64 0.11.5-1.el7 epel 368 k
     librgw2 x86_64 2:14.2.12-0.el7 x86_64 5.1 M
     lttng-ust x86_64 2.4.1-4.el7 epel 176 k
     python-beaker noarch 1.5.4-10.el7 base 80 k
     python-ceph-argparse x86_64 2:14.2.12-0.el7 x86_64 36 k
     python-cephfs x86_64 2:14.2.12-0.el7 x86_64 112 k
     python-cherrypy noarch 3.2.2-4.el7 base 422 k
     python-mako noarch 0.8.1-2.el7 base 307 k
     python-markupsafe x86_64 0.11-10.el7 base 25 k
     python-paste noarch 1.7.5.1-9.20111221hg1498.el7 base 866 k
     python-pecan noarch 0.4.5-2.el7 epel 255 k
     python-prettytable noarch 0.7.2-3.el7 base 37 k
     python-rados x86_64 2:14.2.12-0.el7 x86_64 200 k
     python-rbd x86_64 2:14.2.12-0.el7 x86_64 195 k
     python-rgw x86_64 2:14.2.12-0.el7 x86_64 78 k
     python-simplegeneric noarch 0.8-7.el7 epel 12 k
     python-singledispatch noarch 3.4.0.2-2.el7 epel 18 k
     python-tempita noarch 0.5.1-6.el7 base 33 k
     python-webob noarch 1.2.3-7.el7 base 202 k
     python-webtest noarch 1.3.4-6.el7 base 102 k
     python-werkzeug noarch 0.9.1-2.el7 extras 562 k
     python2-bcrypt x86_64 3.1.6-2.el7 epel 39 k
     python2-six noarch 1.9.0-0.el7 epel 2.9 k
     userspace-rcu x86_64 0.7.16-1.el7 epel 73 k
     Updating for dependencies:
     librados2 x86_64 2:14.2.12-0.el7 x86_64 3.4 M
     librbd1 x86_64 2:14.2.12-0.el7 x86_64 1.7 M
     selinux-policy noarch 3.13.1-266.el7_8.1 updates 497 k
     selinux-policy-targeted noarch 3.13.1-266.el7_8.1 updates 7.0 M
     ​
     Transaction Summary
     ================================================================================
     Install 2 Packages (+37 Dependent packages)
     Upgrade ( 4 Dependent packages)
     ​
     Total download size: 77 M
     Downloading packages:
     No Presto metadata available for x86_64
     No Presto metadata available for updates
    • 





Total 3.0 MB/s | 77 MB 00:25
 Running transaction check
 Running transaction test
 Transaction test succeeded
 Running transaction
 Installing : leveldb-1.12.0-11.el7.x86_64 1/47
 Installing : liboath-2.6.2-1.el7.x86_64 2/47
 Installing : librabbitmq-0.8.0-2.el7.x86_64 3/47
 Installing : python-webob-1.2.3-7.el7.noarch 4/47
 Installing : 2:python-ceph-argparse-14.2.12-0.el7.x86_64 5/47
 Installing : python-webtest-1.3.4-6.el7.noarch 6/47
 Installing : python-tempita-0.5.1-6.el7.noarch 7/47
 Installing : python-paste-1.7.5.1-9.20111221hg1498.el7.noarch 8/47
 Installing : python-beaker-1.5.4-10.el7.noarch 9/47
 Installing : python-cherrypy-3.2.2-4.el7.noarch 10/47
 Installing : python-werkzeug-0.9.1-2.el7.noarch 11/47
 Installing : librdkafka-0.11.5-1.el7.x86_64 12/47
 Installing : python-markupsafe-0.11-10.el7.x86_64 13/47
 Installing : python-mako-0.8.1-2.el7.noarch 14/47
 Installing : python-singledispatch-3.4.0.2-2.el7.noarch 15/47
 Updating : selinux-policy-3.13.1-266.el7_8.1.noarch 16/47
 Updating : selinux-policy-targeted-3.13.1-266.el7_8.1.noarch 17/47
 Installing : libbabeltrace-1.2.4-3.el7.x86_64 18/47
 Installing : python-simplegeneric-0.8-7.el7.noarch 19/47
 Installing : python-pecan-0.4.5-2.el7.noarch 20/47
 Installing : userspace-rcu-0.7.16-1.el7.x86_64 21/47
 Installing : lttng-ust-2.4.1-4.el7.x86_64 22/47
 Updating : 2:librados2-14.2.12-0.el7.x86_64 23/47
 Installing : 2:python-rados-14.2.12-0.el7.x86_64 24/47
 Installing : 2:librgw2-14.2.12-0.el7.x86_64 25/47
 Installing : 2:libcephfs2-14.2.12-0.el7.x86_64 26/47
 Updating : 2:librbd1-14.2.12-0.el7.x86_64 27/47
 Installing : 2:python-rbd-14.2.12-0.el7.x86_64 28/47
 Installing : 2:python-cephfs-14.2.12-0.el7.x86_64 29/47
 Installing : 2:python-rgw-14.2.12-0.el7.x86_64 30/47
 Installing : 2:libradosstriper1-14.2.12-0.el7.x86_64 31/47
 Installing : python-prettytable-0.7.2-3.el7.noarch 32/47
 Installing : 2:ceph-common-14.2.12-0.el7.x86_64 33/47
 Installing : 2:ceph-base-14.2.12-0.el7.x86_64 34/47
 Installing : 2:ceph-selinux-14.2.12-0.el7.x86_64 35/47
 Installing : 2:ceph-mon-14.2.12-0.el7.x86_64 36/47
 Installing : 2:ceph-osd-14.2.12-0.el7.x86_64 37/47
 Installing : 2:ceph-mds-14.2.12-0.el7.x86_64 38/47
 Installing : python2-six-1.9.0-0.el7.noarch 39/47
 Installing : python2-bcrypt-3.1.6-2.el7.x86_64 40/47
 Installing : 2:ceph-mgr-14.2.12-0.el7.x86_64 41/47
 Installing : 2:ceph-14.2.12-0.el7.x86_64 42/47
 Installing : 2:ceph-radosgw-14.2.12-0.el7.x86_64 43/47
 Cleanup : selinux-policy-targeted-3.13.1-229.el7.noarch 44/47
 Cleanup : 1:librbd1-10.2.5-4.el7.x86_64 45/47
 Cleanup : selinux-policy-3.13.1-229.el7.noarch 46/47
 Cleanup : 1:librados2-10.2.5-4.el7.x86_64 47/47
 Verifying : liboath-2.6.2-1.el7.x86_64 1/47
 Verifying : python2-six-1.9.0-0.el7.noarch 2/47
 Verifying : 2:python-rbd-14.2.12-0.el7.x86_64 3/47
 Verifying : python-prettytable-0.7.2-3.el7.noarch 4/47
 Verifying : leveldb-1.12.0-11.el7.x86_64 5/47
 Verifying : python2-bcrypt-3.1.6-2.el7.x86_64 6/47
 Verifying : userspace-rcu-0.7.16-1.el7.x86_64 7/47
 Verifying : python-simplegeneric-0.8-7.el7.noarch 8/47
 Verifying : 2:python-cephfs-14.2.12-0.el7.x86_64 9/47
 Verifying : libbabeltrace-1.2.4-3.el7.x86_64 10/47
 Verifying : python-mako-0.8.1-2.el7.noarch 11/47
 Verifying : 2:ceph-selinux-14.2.12-0.el7.x86_64 12/47
 Verifying : selinux-policy-3.13.1-266.el7_8.1.noarch 13/47
 Verifying : 2:librgw2-14.2.12-0.el7.x86_64 14/47
 Verifying : 2:ceph-mon-14.2.12-0.el7.x86_64 15/47
 Verifying : python-pecan-0.4.5-2.el7.noarch 16/47
 Verifying : 2:ceph-radosgw-14.2.12-0.el7.x86_64 17/47
 Verifying : python-singledispatch-3.4.0.2-2.el7.noarch 18/47
 Verifying : python-markupsafe-0.11-10.el7.x86_64 19/47
 Verifying : 2:ceph-common-14.2.12-0.el7.x86_64 20/47
 Verifying : 2:libcephfs2-14.2.12-0.el7.x86_64 21/47
 Verifying : librdkafka-0.11.5-1.el7.x86_64 22/47
 Verifying : python-paste-1.7.5.1-9.20111221hg1498.el7.noarch 23/47
 Verifying : lttng-ust-2.4.1-4.el7.x86_64 24/47
 Verifying : 2:ceph-osd-14.2.12-0.el7.x86_64 25/47
 Verifying : python-werkzeug-0.9.1-2.el7.noarch 26/47
 Verifying : 2:python-rados-14.2.12-0.el7.x86_64 27/47
 Verifying : 2:libradosstriper1-14.2.12-0.el7.x86_64 28/47
 Verifying : 2:ceph-base-14.2.12-0.el7.x86_64 29/47
 Verifying : 2:ceph-mgr-14.2.12-0.el7.x86_64 30/47
 Verifying : python-cherrypy-3.2.2-4.el7.noarch 31/47
 Verifying : python-beaker-1.5.4-10.el7.noarch 32/47
 Verifying : 2:python-rgw-14.2.12-0.el7.x86_64 33/47
 Verifying : 2:librados2-14.2.12-0.el7.x86_64 34/47
 Verifying : 2:ceph-mds-14.2.12-0.el7.x86_64 35/47
 Verifying : selinux-policy-targeted-3.13.1-266.el7_8.1.noarch 36/47
 Verifying : python-tempita-0.5.1-6.el7.noarch 37/47
 Verifying : python-webtest-1.3.4-6.el7.noarch 38/47
 Verifying : 2:python-ceph-argparse-14.2.12-0.el7.x86_64 39/47
 Verifying : librabbitmq-0.8.0-2.el7.x86_64 40/47
 Verifying : 2:librbd1-14.2.12-0.el7.x86_64 41/47
 Verifying : python-webob-1.2.3-7.el7.noarch 42/47
 Verifying : 2:ceph-14.2.12-0.el7.x86_64 43/47
 Verifying : 1:librbd1-10.2.5-4.el7.x86_64 44/47
 Verifying : selinux-policy-3.13.1-229.el7.noarch 45/47
 Verifying : selinux-policy-targeted-3.13.1-229.el7.noarch 46/47
 Verifying : 1:librados2-10.2.5-4.el7.x86_64 47/47
 ​
 Installed:
 ceph.x86_64 2:14.2.12-0.el7 ceph-radosgw.x86_64 2:14.2.12-0.el7
 ​
 Dependency Installed:
 ceph-base.x86_64 2:14.2.12-0.el7
 ceph-common.x86_64 2:14.2.12-0.el7
 ceph-mds.x86_64 2:14.2.12-0.el7
 ceph-mgr.x86_64 2:14.2.12-0.el7
 ceph-mon.x86_64 2:14.2.12-0.el7
 ceph-osd.x86_64 2:14.2.12-0.el7
 ceph-selinux.x86_64 2:14.2.12-0.el7
 leveldb.x86_64 0:1.12.0-11.el7
 libbabeltrace.x86_64 0:1.2.4-3.el7
 libcephfs2.x86_64 2:14.2.12-0.el7
 liboath.x86_64 0:2.6.2-1.el7
 librabbitmq.x86_64 0:0.8.0-2.el7
 libradosstriper1.x86_64 2:14.2.12-0.el7
 librdkafka.x86_64 0:0.11.5-1.el7
 librgw2.x86_64 2:14.2.12-0.el7
 lttng-ust.x86_64 0:2.4.1-4.el7
 python-beaker.noarch 0:1.5.4-10.el7
 python-ceph-argparse.x86_64 2:14.2.12-0.el7
 python-cephfs.x86_64 2:14.2.12-0.el7
 python-cherrypy.noarch 0:3.2.2-4.el7
 python-mako.noarch 0:0.8.1-2.el7
 python-markupsafe.x86_64 0:0.11-10.el7
 python-paste.noarch 0:1.7.5.1-9.20111221hg1498.el7
 python-pecan.noarch 0:0.4.5-2.el7
 python-prettytable.noarch 0:0.7.2-3.el7
 python-rados.x86_64 2:14.2.12-0.el7
 python-rbd.x86_64 2:14.2.12-0.el7
 python-rgw.x86_64 2:14.2.12-0.el7
 python-simplegeneric.noarch 0:0.8-7.el7
 python-singledispatch.noarch 0:3.4.0.2-2.el7
 python-tempita.noarch 0:0.5.1-6.el7
 python-webob.noarch 0:1.2.3-7.el7
 python-webtest.noarch 0:1.3.4-6.el7
 python-werkzeug.noarch 0:0.9.1-2.el7
 python2-bcrypt.x86_64 0:3.1.6-2.el7
 python2-six.noarch 0:1.9.0-0.el7
 userspace-rcu.x86_64 0:0.7.16-1.el7
 ​
 Dependency Updated:
 librados2.x86_64 2:14.2.12-0.el7
 librbd1.x86_64 2:14.2.12-0.el7
 selinux-policy.noarch 0:3.13.1-266.el7_8.1
 selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1
 ​
 Complete!
 [root@node01 ~]#
 ​
 [root@node01 ~]# ceph -v
 ceph version 14.2.12 (2f3caa3b8b3d5c5f2719a1e9d8e7deea5ae1a5c6) nautilus (stable)
 [root@node01 ~]#
 [root@node01 ~]# rpm -qa|grep ceph
 ceph-base-14.2.12-0.el7.x86_64
 ceph-mgr-14.2.12-0.el7.x86_64
 ceph-selinux-14.2.12-0.el7.x86_64
 ceph-radosgw-14.2.12-0.el7.x86_64
 ceph-mds-14.2.12-0.el7.x86_64
 python-ceph-argparse-14.2.12-0.el7.x86_64
 python-cephfs-14.2.12-0.el7.x86_64
 ceph-osd-14.2.12-0.el7.x86_64
 ceph-deploy-2.0.1-0.noarch
 libcephfs2-14.2.12-0.el7.x86_64
 ceph-14.2.12-0.el7.x86_64
 ceph-common-14.2.12-0.el7.x86_64
 ceph-mon-14.2.12-0.el7.x86_64
 [root@node01 ~]#
 ​
 [root@node02 ~]# ceph -v
 ceph version 14.2.12 (2f3caa3b8b3d5c5f2719a1e9d8e7deea5ae1a5c6) nautilus (stable)
 [root@node02 ~]#
 [root@node03 ~]# rpm -qa|grep ceph
 ceph-mon-14.2.12-0.el7.x86_64
 ceph-common-14.2.12-0.el7.x86_64
 ceph-selinux-14.2.12-0.el7.x86_64
 ceph-radosgw-14.2.12-0.el7.x86_64
 python-ceph-argparse-14.2.12-0.el7.x86_64
 python-cephfs-14.2.12-0.el7.x86_64
 ceph-osd-14.2.12-0.el7.x86_64
 libcephfs2-14.2.12-0.el7.x86_64
 ceph-base-14.2.12-0.el7.x86_64
 ceph-14.2.12-0.el7.x86_64
 ceph-mgr-14.2.12-0.el7.x86_64
 ceph-mds-14.2.12-0.el7.x86_64
 [root@node02 ~]#
 [root@node03 ~]# ceph -v
 ceph version 14.2.12 (2f3caa3b8b3d5c5f2719a1e9d8e7deea5ae1a5c6) nautilus (stable)
 [root@node03 ~]#
 [root@node03 ~]# rpm -qa|grep ceph
 ceph-mon-14.2.12-0.el7.x86_64
 ceph-common-14.2.12-0.el7.x86_64
 ceph-selinux-14.2.12-0.el7.x86_64
 ceph-radosgw-14.2.12-0.el7.x86_64
 python-ceph-argparse-14.2.12-0.el7.x86_64
 python-cephfs-14.2.12-0.el7.x86_64
 ceph-osd-14.2.12-0.el7.x86_64
 libcephfs2-14.2.12-0.el7.x86_64
 ceph-base-14.2.12-0.el7.x86_64
 ceph-14.2.12-0.el7.x86_64
 ceph-mgr-14.2.12-0.el7.x86_64
 ceph-mds-14.2.12-0.el7.x86_64
 [root@node03 ~]#

7.开始部署集群

[root@node01 ~]# mkdir -p /cluster [root@node01 ~]# cd /cluster/ [root@node01 cluster]# ceph-deploy new node01 node02 node03

[root@node01 ~]# mkdir -p /cluster
 [root@node01 ~]#
 [root@node01 ~]# cd /cluster/
 [root@node01 ~]#
 [root@node01 cluster]# ceph-deploy new node01 node02 node03
 [ceph_deploy.conf][DEBUG ] found configuration file at: /root/.cephdeploy.conf
 [ceph_deploy.cli][INFO ] Invoked (2.0.1): /usr/bin/ceph-deploy new node01 node02 node03
 [ceph_deploy.cli][INFO ] ceph-deploy options:
 [ceph_deploy.cli][INFO ] username : None
 [ceph_deploy.cli][INFO ] func : 
 [ceph_deploy.cli][INFO ] verbose : False
 [ceph_deploy.cli][INFO ] overwrite_conf : False
 [ceph_deploy.cli][INFO ] quiet : False
 [ceph_deploy.cli][INFO ] cd_conf : 
 [ceph_deploy.cli][INFO ] cluster : ceph
 [ceph_deploy.cli][INFO ] ssh_copykey : True
 [ceph_deploy.cli][INFO ] mon : ['node01', 'node02', 'node03']
 [ceph_deploy.cli][INFO ] public_network : None
 [ceph_deploy.cli][INFO ] ceph_conf : None
 [ceph_deploy.cli][INFO ] cluster_network : None
 [ceph_deploy.cli][INFO ] default_release : False
 [ceph_deploy.cli][INFO ] fsid : None
 [ceph_deploy.new][DEBUG ] Creating new cluster named ceph
 [ceph_deploy.new][INFO ] making sure passwordless SSH succeeds
 [node01][DEBUG ] connected to host: node01
 [node01][DEBUG ] detect platform information from remote host
 [node01][DEBUG ] detect machine type
 [node01][DEBUG ] find the location of an executable
 [node01][INFO ] Running command: /usr/sbin/ip link show
 [node01][INFO ] Running command: /usr/sbin/ip addr show
 [node01][DEBUG ] IP addresses found: [u'192.168.1.181']
 [ceph_deploy.new][DEBUG ] Resolving host node01
 [ceph_deploy.new][DEBUG ] Monitor node01 at 192.168.1.181
 [ceph_deploy.new][INFO ] making sure passwordless SSH succeeds
 [node02][DEBUG ] connected to host: node01
 [node02][INFO ] Running command: ssh -CT -o BatchMode=yes node02
 [ceph_deploy.new][WARNIN] could not connect via SSH
 [ceph_deploy.new][INFO ] creating a passwordless id_rsa.pub key file
 [ceph_deploy.new][DEBUG ] connected to host: node01
 [ceph_deploy.new][INFO ] Running command: ssh-keygen -t rsa -N -f /root/.ssh/id_rsa
 [ceph_deploy.new][DEBUG ] Generating public/private rsa key pair.
 [ceph_deploy.new][DEBUG ] Your identification has been saved in /root/.ssh/id_rsa.
 [ceph_deploy.new][DEBUG ] Your public key has been saved in /root/.ssh/id_rsa.pub.
 [ceph_deploy.new][DEBUG ] The key fingerprint is:
 [ceph_deploy.new][DEBUG ] SHA256:q7J5xVb9xGPEw1SPQVlkndreYjqHZYUPSfpr6+h/ojU root@node01
 [ceph_deploy.new][DEBUG ] The key's randomart image is:
 [ceph_deploy.new][DEBUG ] +---[RSA 2048]----+
 [ceph_deploy.new][DEBUG ] | =+=B|
 [ceph_deploy.new][DEBUG ] | B=o|
 [ceph_deploy.new][DEBUG ] | . =++.|
 [ceph_deploy.new][DEBUG ] | . o.O..|
 [ceph_deploy.new][DEBUG ] | .S. =.=.|
 [ceph_deploy.new][DEBUG ] | +. B.o|
 [ceph_deploy.new][DEBUG ] | o. *Eo |
 [ceph_deploy.new][DEBUG ] | .... +o=..|
 [ceph_deploy.new][DEBUG ] | o+. .+B++ |
 [ceph_deploy.new][DEBUG ] +----[SHA256]-----+
 [ceph_deploy.new][INFO ] will connect again with password prompt
 root@node02's password:
 [node02][DEBUG ] connected to host: node02
 [node02][DEBUG ] detect platform information from remote host
 [node02][DEBUG ] detect machine type
 [node02][WARNIN] .ssh/authorized_keys does not exist, will skip adding keys
 root@node02's password:
 root@node02's password:
 [node02][DEBUG ] connected to host: node02
 [node02][DEBUG ] detect platform information from remote host
 [node02][DEBUG ] detect machine type
 [node02][DEBUG ] find the location of an executable
 [node02][INFO ] Running command: /usr/sbin/ip link show
 [node02][INFO ] Running command: /usr/sbin/ip addr show
 [node02][DEBUG ] IP addresses found: [u'172.17.93.1', u'192.168.1.182']
 [ceph_deploy.new][DEBUG ] Resolving host node02
 [ceph_deploy.new][DEBUG ] Monitor node02 at 192.168.1.182
 [ceph_deploy.new][INFO ] making sure passwordless SSH succeeds
 [node03][DEBUG ] connected to host: node01
 [node03][INFO ] Running command: ssh -CT -o BatchMode=yes node03
 [ceph_deploy.new][WARNIN] could not connect via SSH
 [ceph_deploy.new][INFO ] will connect again with password prompt
 root@node03's password:
 [node03][DEBUG ] connected to host: node03
 [node03][DEBUG ] detect platform information from remote host
 [node03][DEBUG ] detect machine type
 [node03][WARNIN] .ssh/authorized_keys does not exist, will skip adding keys
 root@node03's password:
 root@node03's password:
 [node03][DEBUG ] connected to host: node03
 [node03][DEBUG ] detect platform information from remote host
 [node03][DEBUG ] detect machine type
 [node03][DEBUG ] find the location of an executable
 [node03][INFO ] Running command: /usr/sbin/ip link show
 [node03][INFO ] Running command: /usr/sbin/ip addr show
 [node03][DEBUG ] IP addresses found: [u'192.168.1.183', u'172.17.12.1']
 [ceph_deploy.new][DEBUG ] Resolving host node03
 [ceph_deploy.new][DEBUG ] Monitor node03 at 192.168.1.183
 [ceph_deploy.new][DEBUG ] Monitor initial members are ['node01', 'node02', 'node03']
 [ceph_deploy.new][DEBUG ] Monitor addrs are ['192.168.1.181', '192.168.1.182', '192.168.1.183']
 [ceph_deploy.new][DEBUG ] Creating a random mon key...
 [ceph_deploy.new][DEBUG ] Writing monitor keyring to ceph.mon.keyring...
 [ceph_deploy.new][DEBUG ] Writing initial config to ceph.conf...
 [root@node01 cluster]#

你可能感兴趣的:(Ceph分布式集群部署01)

  • 2020-01-25 晴岚85
    郑海燕坚持分享590天2020.1.24在生活中只存在两个问题。一个问题是：你知道想要达成的目标是什么，但却不知道如何才能达成；另一个问题是：你不知道你的目标是什么。前一个是行动的问题，后一个是结果的问题。通过制定具体的下一步行动，可以解决不知道如何开始行动的问题。而通过去想象结果，对结果做预估，可以解决找不着目标的问题。对于所有吸引我们注意力，想要完成的任务，你可以先想象一下，预期的结果究竟是什
  • 10月|愿你的青春不负梦想-读书笔记-01 Tracy的小书斋
    本书的作者是俞敏洪，大家都很熟悉他了吧。俞敏洪老师是我行业的领头羊吧，也是我事业上的偶像。本日摘录他书中第一章中的金句：『一个人如果什么目标都没有，就会浑浑噩噩，感觉生命中缺少能量。能给我们能量的，是对未来的期待。第一件事，我始终为了进步而努力。与其追寻全世界的骏马，不如种植丰美的草原，到时骏马自然会来。第二件事，我始终有阶段性的目标。什么东西能给我能量？答案是对未来的期待。』读到这里的时候，我便
  • 《策划经理回忆录之二》 路基雅虎
    话说三年变六年，飘了，飘了……眨眼，2013年5月，老吴回到了他的家乡——油城从新开启他的工作幻想症生涯。很庆幸，这是一家很有追求，同时敢于尝试的，且实力不容低调的新星房企——金源置业(前身泰源置业)更值得庆幸的是第一个盘就是油城十路的标杆之一:金源盛世。2013年5月，到2015年11月，两年的陪伴，迎来了一场大爆发。2000个筹，5万/筹，直接回笼1个亿！！！这……让我开始认真审视这座看似五线
  • 绘本讲师训练营【24期】8/21阅读原创《独生小孩》 1784e22615e0
    24016-孟娟《独生小孩》图片发自App今天我想分享一个蛮特别的绘本，讲的是一个特殊的群体，我也是属于这个群体，80后的独生小孩。这是一本中国绘本，作者郭婧，也是一个80厚。全书一百多页，均为铅笔绘制，虽然为黑白色调，但并不显得沉闷。全书没有文字，犹如“默片”，但并不影响读者对该作品的理解，反而显得神秘，梦幻，給读者留下想象的空间。作者在前蝴蝶页这样写到：“我更希望父母和孩子一起分享这本书，使他
  • 抖音乐买买怎么加入赚钱?赚钱方法是什么 测评君高省
    你会在抖音买东西吗?如果会，那么一定要免费注册一个乐买买，抖音直播间，橱窗，小视频里的小黄车买东西都可以返佣金!省下来都是自己的，分享还可以赚钱乐买买是好省旗下的抖音返佣平台，乐买买分析社交电商的价值，乐买买属于今年难得的副业项目风口机会，2019年错过做好省的搞钱的黄金时期，那么2022年千万别再错过乐买买至于我为何转到高省呢？当然是高省APP佣金更高，模式更好，终端用户不流失。【高省】是一个自
  • 2018-07-23-催眠日作业-#不一样的31天#-66小鹿 小鹿_33
    预言日：人总是在逃避命运的路上，与之不期而遇。心理学上有个著名的名词，叫做自证预言；经济学上也有一个很著名的定律叫做，墨菲定律；在灵修派上，还有一个很著名的法则，叫做吸引力法则。这3个领域的词，虽然看起来不太一样，但是他们都在告诉人们一个现象：你越担心什么，就越有可能会发生什么。同样的道理，你越想得到什么，就应该要积极地去创造什么。无论是自证预言，墨菲定律还是吸引力法则，对人都有正反2个维度的影响
  • 《小满细雨轻湿尘》 快乐的人ZZM
    图片发自App《小满细雨轻湿尘》文/快乐的人zzm小满细雨轻湿尘石榴花开落纷纷落红不是无情物坠入泥土育养根2018-5-23
  • 2019-12-22-22:30 涓涓1016
    今天是冬至，写下我的日更，是因为这两天的学习真的是能量的满满，让我看到了自己，未来另外一种可能性，也让我看到了这两年这几年的过程中我所接受那些痛苦的来源。一切的根源和痛苦都来自于人生，家庭，而你的原生家庭，你的爸爸和妈妈，是因为你这个灵魂在那一刻选择他们作为你的爸爸和妈妈来的，所以你得接受他，你得接纳他，他就是因为他的存在而给你的学习和成长带来这些痛苦，那其实是你必然要经历的这个过程，当你去接纳的
  • 509. 斐波那契数(每日一题) lzyprime
    lzyprime博客(github)创建时间：2021.01.04qq及邮箱：2383518170leetcode笔记题目描述斐波那契数，通常用F(n)表示，形成的序列称为斐波那契数列。该数列由0和1开始，后面的每一项数字都是前面两项数字的和。也就是：F(0)=0，F(1)=1F(n)=F(n-1)+F(n-2)，其中n>1给你n，请计算F(n)。示例1：输入：2输出：1解释：F(2)=F(1)+
  • 今又重阳 芮峻
    今又重阳图片发自App白露成霜菊花黄，岁岁重阳，今又重阳。登高远望，君不见，那来时路上少年，青丝已染雪霜。落日一点一点西坠，谁有力量，托住使其回往。转眼缺了大半，又能怎样？江天两茫茫。给我一壶烈酒，我要敬那斜阳，看谁先醉？笑指西天红了一片，借点酒力，老夫聊发一次少年狂。老严.2019年重阳节.杭州
  • 2018/02/12 Tracy_zhang
    人生并不在于获取，更在于放得下。放下一粒种子，收获一棵大树;放下一处烦恼，收获一个惊喜;放下一种偏见，收获一种幸福;放下一种执著，收获一种自在。放下既是一种理性抉择，也是一种豁达美。只要看得开放得下，何愁没有快乐的春莺在啼鸣，何愁没有快乐的泉溪在歌唱，何愁没有快乐的鲜花绽放!
  • 郎朗大婚娶公主：所有光环的背后，都是十年如一日的自律 简小尘
    近日，关于郎朗大婚的新闻上了热搜，看了新娘的照片，既有天使般的面容，更有魔鬼般的身材，关键是人家还身世好，又有才华，这真的是让所有男人羡慕嫉妒恨哪。有些人不禁会想，“凭什么郎朗的人生就象开挂了一样，可我却每天都活得这么狼狈！”其实，每个开挂的人生背后，都是苦行僧般的自律。01欲戴王冠，必承其重。练琴不能只靠兴趣，更需要自律！我们先来看一下朗朗在小时候的作息时间表：早晨5:45起床，练琴1小时。中午
  • 398顺境，逆境 戴骁勇
    2018.11.27周二雾霾最近儿子进入了一段顺境期，今天表现尤其不错。今天的数学测试成绩喜人，没有出现以往的计算错误，整个卷面书写工整，附加题也在规定时间内完成且做对。为迎接体育测试的锻炼有了质的飞跃。坐位体前屈成绩突飞猛进，估测成绩能达到12cm，这和上次测试的零分来比，简直是逆袭。儿子还在不断锻炼和提升，唯恐到时候掉链子。跑步姿势在我的调教下，逐渐正规起来，速度随之也有了提升。今晚测试的50
  • 2019-08-08 65454
    东莞家庭聚会出行旅游去哪里玩住？想起来有很久没有和家里人聚会啦，这次组织家人来到威廉古堡别墅轰趴，一大家子27个人，在别墅订了一天办，玩的非常的开心，小孩子玩游戏机，也很放心不会丢，我们就在唱歌、打麻将、打桌球一系列的活动，还准备小次等小孩生日在别墅举办，还可以给孩子做一个生日的策划
  • GitHub上克隆项目 bigbig猩猩 github
    从GitHub上克隆项目是一个简单且直接的过程，它允许你将远程仓库中的项目复制到你的本地计算机上，以便进行进一步的开发、测试或学习。以下是一个详细的步骤指南，帮助你从GitHub上克隆项目。一、准备工作1.安装Git在克隆GitHub项目之前，你需要在你的计算机上安装Git工具。Git是一个开源的分布式版本控制系统，用于跟踪和管理代码变更。你可以从Git的官方网站（https://git-scm.
  • 似乎，发生了很多事情 阿皮Ponder
    似乎，有很多事情正在发生。今天，我跟夫人陪着孩子走进来幼儿园，人生头一回以孩子家长的身份参加了小小的班级家长会。在幼儿园，遇见老同学。从2017年开始失联，因为对方遇到了一些事情，跟大家都失去了联系，今日再见面，分外激动，他拉着我一直聊，一直聊。感谢我们的孩子。孩子有点咳嗽，去医院做了检查。叔叔家的两个妹妹开始了高中生活，新的开始。过去看望，遇到一位老师，很是面熟。咨询之下，果然，曾经初中母校的老
  • 百善孝为先 杜友顺
    2018年11月29日天气~晴星期四找点空闲找点时间领着孩子常回家看看带上笑容带上祝福陪同爱人常回家看看家，永远是儿女们幸福温暖的港湾，那里有我们日夜思念的父母，有着彼此的牵挂，无论走到哪里，家永远是避风雨的港湾。今天没事，和媳妇回了趟老家，看看父母，回到家，房间里不算凌乱，可是细心的我发现有的地方已经沾满了灰尘，桌子上父亲不离手的烟灰缸也弹满了烟灰。几个马上就要腐烂掉的水果蔫耷的搭拉着脑袋躺在了
  • pyecharts——绘制柱形图折线图 2224070247 信息可视化pythonjava数据可视化
    一、pyecharts概述自2013年6月百度EFE(ExcellentFrontEnd）数据可视化团队研发的ECharts1.0发布到GitHub网站以来，ECharts一直备受业界权威的关注并获得广泛好评，成为目前成熟且流行的数据可视化图表工具，被应用到诸多数据可视化的开发领域。Python作为数据分析领域最受欢迎的语言，也加入ECharts的使用行列，并研发出方便Python开发者使用的数据
  • 嘿，谢谢你 小小玛拉沁
    突然想对一个女孩子说，谢谢你！很久很久以前，总是觉得和你不会有太多交集，充其量也只是普通的舍友吧，毕竟有很多习惯，性格等方面相差甚远。其实特别感谢2017这一段经历和我遇见的人，只会慢吞吞的过自己生活的安小蜗是不会主动去结交朋友的，所以她来到了我的世界，让我在不知不觉中发现了自己太多太多的问题，而我正在逐渐去改变这些的习惯，成为更好的自己！我总是超级佩服她不管什么时候精力都超级旺盛，可以在上了一天
  • 01-Git初识 Meereen Gitgit
    01-Git初识概念：一个免费开源，分布式的代码版本控制系统，帮助开发团队维护代码作用：记录代码内容。切换代码版本，多人开发时高效合并代码内容如何学：个人本机使用：Git基础命令和概念多人共享使用：团队开发同一个项目的代码版本管理Git配置用户信息配置：用户名和邮箱，应用在每次提交代码版本时表明自己的身份命令：查看git版本号git-v配置用户名gitconfig--globaluser.name
  • 2018-12-29 枫叶红时总多离别
    2018年12月29日星期六昨天老师就告诉我们，今天下午不用上课，是图书漂流活动会。我觉得很兴奋，好期待。到了下午，我帮好忙就到外面去买书，刚一出去，就有一大帮的大哥哥、大姐姐围着我问要不要买书，买一本书送一颗糖。我看到了一本《小老虎比上树》的书，问大姐姐多少钱，大姐姐说这本书原价13块，现在便宜4块钱也就是9块钱卖给你，我就把一张10块钱给她找，她找了我一块钱。我现在想想我今天只带了10块钱，现
  • 【穿过丛林看见你】2015年在《诗歌报》读诗日记（一） 快快_ce70
    写完《三月的领土》和《手握一把锄头，在翻动诗歌的春天》之后，安稳的睡了个好觉，这是从2013年的五月之后，第一次睡的如此安稳和香甜。其实这对于我来说，也没有什么特别的意义和变故，就像我现在的生活在人人忙着踏青、写生、拍照的春天。在我脚下，没有领土的完整，也没有加剧的破碎。我曾经和现在都是个辛勤的“蜂农”，在这样一个角色里，尽管有人盗走了我所有的蜜，但不妨碍我对甜蜜的不懈追求和喜爱。翻开最近的阅读笔
  • 2019-3-23晨间日记 红红火火小耳朵
    今天是什么日子起床：7点40就寝：23点半天气：有太阳，不过一会儿出来一会儿进去特别清爽的凉意，还蛮舒服的心情：小激动要给女朋友过生日啦纪念日：田田女士过生日任务清单昨日完成的任务，最重要的三件事：1.英语一对一2.运动计划3.认真护肤习惯养成：调整状态周目标·完成进度英语七天打卡（5/7）轻课阅读（87/180）音标课（25/30）读书（福尔摩斯一章）学习·信息·阅读#英语课#Cookingte
  • 2019-05-13 王健_100a
    【撒下18:2】大卫打发军兵出战，分为三队：一队在约押手下，一队在洗鲁雅的儿子约押兄弟亚比筛手下，一队在迦特人以太手下。大卫对军兵说：“我必与你们一同出战。”解释：大卫检阅部队，将它分成三队，每队由一位元帅统领；约押与兄弟亚比筛，并迦特人以太共同指挥。大卫想与他们一同出战！应用：作为领袖与军兵一起出战是很重要。领袖在事奉中与信徒一起，领袖在任何的环境里与信徒一起走过。我们要同心协力为主而战。祷告：
  • 【无标题】达瓦达瓦 JhonKI 考研
    博客主页：https://blog.csdn.net/2301_779549673欢迎点赞收藏⭐留言如有错误敬请指正！本文由JohnKi原创，首发于CSDN未来很长，值得我们全力奔赴更美好的生活✨文章目录前言111️‍111❤️111111111111111总结111前言111骗骗流量券，嘿嘿111111111111111111111111111️‍111❤️111111111111111总结11
  • 上图为是否色发 JhonKI 考研
    博客主页：https://blog.csdn.net/2301_779549673欢迎点赞收藏⭐留言如有错误敬请指正！本文由JohnKi原创，首发于CSDN未来很长，值得我们全力奔赴更美好的生活✨文章目录前言111️‍111❤️111111111111111总结111前言111骗骗流量券，嘿嘿111111111111111111111111111️‍111❤️111111111111111总结11
  • 2019-11-04复盘——飞来山上千寻塔，闻说鸡鸣见日升。 那一叶秋
    1、大盘篇先上老图，看习惯了，也就知道走势了图1上证指数日线图还是那张老图，自己可以在自己的相关软件上画出来，快变盘了。2、个股篇未加仓、未减仓。分析量能的时候，突然发现这么一个东西：“放量突破年线，缩量回调。”合众科技日线图其实，最近的N只个股，在技术分析上，都到了变盘的临界时候。结合这么久的走势，特别是ZJH不断放开IPO的申请，本质上说是融资难度变大，或者说是为企业的融资开创便利。但现在市场
  • 数字里的世界17期：2021年全球10大顶级数据中心，中国移动榜首 张三叨
    你知道吗？2016年，全球的数据中心共计用电4160亿千瓦时，比整个英国的发电量还多40％！前言每天，我们都会创造超过250万TB的数据。并且随着物联网（IOT）的不断普及，这一数据将持续增长。如此庞大的数据被存储在被称为“数据中心”的专用设施中。虽然最早的数据中心建于20世纪40年代，但直到1997-2000年的互联网泡沫期间才逐渐成为主流。当前人类的技术，比如人工智能和机器学习，已经将我们推向
  • 2019-08-16 希望在东方
    《春游荣华山》春游荣华山，乍暖还寒。青苔路，石阶险。山路弯上弯！为寻古寺往幽探。细雨已润江南岸，初春芳草现。老树新芽冒枝端，人间又过到新年。今游荣华山，树茂参天，古寺悠闲。细雨飘落发端！三眼井旁，投币许心愿，并祷一世安然。更喜大女明事端，应心安，放开颜。修竹静默，雨中吐心愿。待得春风浩吹时，春笋节节攀。图片发自App图片发自App图片发自App
  • 143234234123432 JhonKI 考研
    博客主页：https://blog.csdn.net/2301_779549673欢迎点赞收藏⭐留言如有错误敬请指正！本文由JohnKi原创，首发于CSDN未来很长，值得我们全力奔赴更美好的生活✨文章目录前言111️‍111❤️111111111111111总结111前言111骗骗流量券，嘿嘿111111111111111111111111111️‍111❤️111111111111111总结11
  • 关于旗正规则引擎中的MD5加密问题 何必如此 jspMD5规则加密
    一般情况下，为了防止个人隐私的泄露，我们都会对用户登录密码进行加密，使数据库相应字段保存的是加密后的字符串，而非原始密码。 在旗正规则引擎中，通过外部调用，可以实现MD5的加密，具体步骤如下： 1.在对象库中选择外部调用，选择“com.flagleader.util.MD5”，在子选项中选择“com.flagleader.util.MD5.getMD5ofStr({arg1})”； 2.在规
  • 【Spark101】Scala Promise/Future在Spark中的应用 bit1129 Promise
    Promise和Future是Scala用于异步调用并实现结果汇集的并发原语，Scala的Future同JUC里面的Future接口含义相同，Promise理解起来就有些绕。等有时间了再仔细的研究下Promise和Future的语义以及应用场景，具体参见Scala在线文档：http://docs.scala-lang.org/sips/completed/futures-promises.html
  • spark sql 访问hive数据的配置详解 daizj spark sqlhivethriftserver
    spark sql 能够通过thriftserver 访问hive数据，默认spark编译的版本是不支持访问hive，因为hive依赖比较多，因此打的包中不包含hive和thriftserver,因此需要自己下载源码进行编译，将hive，thriftserver打包进去才能够访问，详细配置步骤如下：   1、下载源码   2、下载Maven,并配置 此配置简单，就略过
  • HTTP 协议通信 周凡杨 javahttpclienthttp通信
                            一：简介  HTTPCLIENT，通过JAVA基于HTTP协议进行点与点间的通信！     二： 代码举例      测试类： import java
  • java unix时间戳转换 g21121 java
    把java时间戳转换成unix时间戳： Timestamp appointTime=Timestamp.valueOf(new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())) SimpleDateFormat df = new SimpleDateFormat("yyyy-MM-dd hh:m
  • web报表工具FineReport常用函数的用法总结（报表函数） 老A不折腾 web报表finereport总结
    说明：本次总结中，凡是以tableName或viewName作为参数因子的。函数在调用的时候均按照先从私有数据源中查找，然后再从公有数据源中查找的顺序。   CLASS CLASS(object):返回object对象的所属的类。   CNMONEY CNMONEY(number,unit)返回人民币大写。 number:需要转换的数值型的数。 unit:单位，
  • java jni调用c++ 代码 报错 墙头上一根草 javaC++jni
    # # A fatal error has been detected by the Java Runtime Environment: # #  EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x00000000777c3290, pid=5632, tid=6656 # # JRE version: Java(TM) SE Ru
  • Spring中事件处理de小技巧 aijuans springSpring 教程Spring 实例Spring 入门Spring3
    Spring 中提供一些Aware相关de接口，BeanFactoryAware、 ApplicationContextAware、ResourceLoaderAware、ServletContextAware等等，其中最常用到de匙ApplicationContextAware.实现ApplicationContextAwaredeBean，在Bean被初始后，将会被注入 Applicati
  • linux shell ls脚本样例 annan211 linuxlinux ls源码linux 源码
    #! /bin/sh - #查找输入文件的路径 #在查找路径下寻找一个或多个原始文件或文件模式 # 查找路径由特定的环境变量所定义 #标准输出所产生的结果 通常是查找路径下找到的每个文件的第一个实体的完整路径 # 或是filename :not found 的标准错误输出。 #如果文件没有找到 则退出码为0 #否则 即为找不到的文件个数 #语法 pathfind [--
  • List,Set,Map遍历方式 (收集的资源,值得看一下) 百合不是茶 listsetMap遍历方式
    List特点：元素有放入顺序，元素可重复 Map特点：元素按键值对存储，无放入顺序 Set特点：元素无放入顺序，元素不可重复（注意：元素虽然无放入顺序，但是元素在set中的位置是有该元素的HashCode决定的，其位置其实是固定的） List接口有三个实现类：LinkedList，ArrayList，Vector LinkedList：底层基于链表实现，链表内存是散乱的，每一个元素存储本身
  • 解决SimpleDateFormat的线程不安全问题的方法 bijian1013 javathread线程安全
    在Java项目中，我们通常会自己写一个DateUtil类，处理日期和字符串的转换，如下所示： public class DateUtil01 { private SimpleDateFormat dateformat = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss"); public void format(Date d
  • http请求测试实例（采用fastjson解析） bijian1013 http测试
            在实际开发中，我们经常会去做http请求的开发，下面则是如何请求的单元测试小实例，仅供参考。 import java.util.HashMap; import java.util.Map; import org.apache.commons.httpclient.HttpClient; import
  • 【RPC框架Hessian三】Hessian 异常处理 bit1129 hessian
    RPC异常处理概述   RPC异常处理指是，当客户端调用远端的服务，如果服务执行过程中发生异常，这个异常能否序列到客户端？   如果服务在执行过程中可能发生异常，那么在服务接口的声明中，就该声明该接口可能抛出的异常。   在Hessian中，服务器端发生异常，可以将异常信息从服务器端序列化到客户端，因为Exception本身是实现了Serializable的
  • 【日志分析】日志分析工具 bit1129 日志分析
    1. 网站日志实时分析工具 GoAccess http://www.vpsee.com/2014/02/a-real-time-web-log-analyzer-goaccess/ 2. 通过日志监控并收集 Java 应用程序性能数据(Perf4J) http://www.ibm.com/developerworks/cn/java/j-lo-logforperf/ 3.log.io 和
  • nginx优化加强战斗力及遇到的坑解决 ronin47 nginx 优化
    　　　先说遇到个坑，第一个是负载问题，这个问题与架构有关，由于我设计架构多了两层，结果导致会话负载只转向一个。解决这样的问题思路有两个：一是改变负载策略，二是更改架构设计。 　　　由于采用动静分离部署，而nginx又设计了静态，结果客户端去读nginx静态，访问量上来，页面加载很慢。解决：二者留其一。最好是保留apache服务器。   　　　来以下优化：   　　　
  • java-50-输入两棵二叉树A和B，判断树B是不是A的子结构 bylijinnan java
    思路来自： http://zhedahht.blog.163.com/blog/static/25411174201011445550396/ import ljn.help.*; public class HasSubtree { /**Q50. * 输入两棵二叉树A和B，判断树B是不是A的子结构。 例如，下图中的两棵树A和B，由于A中有一部分子树的结构和B是一
  • mongoDB 备份与恢复 开窍的石头 mongDB备份与恢复
    Mongodb导出与导入 1: 导入/导出可以操作的是本地的mongodb服务器,也可以是远程的. 所以,都有如下通用选项: -h host   主机 --port port    端口 -u username 用户名 -p passwd   密码 2: mongoexport 导出json格式的文件
  • [网络与通讯]椭圆轨道计算的一些问题 comsci 网络
         如果按照中国古代农历的历法，现在应该是某个季节的开始，但是由于农历历法是3000年前的天文观测数据，如果按照现在的天文学记录来进行修正的话，这个季节已经过去一段时间了。。。。。       也就是说，还要再等3000年。才有机会了，太阳系的行星的椭圆轨道受到外来天体的干扰，轨道次序发生了变
  • 软件专利如何申请 cuiyadll 软件专利申请
    软件技术可以申请软件著作权以保护软件源代码，也可以申请发明专利以保护软件流程中的步骤执行方式。专利保护的是软件解决问题的思想，而软件著作权保护的是软件代码（即软件思想的表达形式）。例如，离线传送文件，那发明专利保护是如何实现离线传送文件。基于相同的软件思想，但实现离线传送的程序代码有千千万万种，每种代码都可以享有各自的软件著作权。申请一个软件发明专利的代理费大概需要5000-8000申请发明专利可
  • Android学习笔记 darrenzhu android
    1.启动一个AVD 2.命令行运行adb shell可连接到AVD,这也就是命令行客户端 3.如何启动一个程序   am start -n package name/.activityName   am start -n com.example.helloworld/.MainActivity 启动Android设置工具的命令如下所示： # am start -
  • apache虚拟机配置，本地多域名访问本地网站 dcj3sjt126com apache
    现在假定你有两个目录，一个存在于 /htdocs/a，另一个存在于 /htdocs/b 。 现在你想要在本地测试的时候访问 www.freeman.com 对应的目录是 /xampp/htdocs/freeman ,访问 www.duchengjiu.com 对应的目录是 /htdocs/duchengjiu。 1、首先修改C盘WINDOWS\system32\drivers\etc目录下的
  • yii2 restful web服务[速率限制] dcj3sjt126com PHPyii2
    速率限制 为防止滥用，你应该考虑增加速率限制到您的API。 例如，您可以限制每个用户的API的使用是在10分钟内最多100次的API调用。 如果一个用户同一个时间段内太多的请求被接收， 将返回响应状态代码 429 (这意味着过多的请求)。 要启用速率限制, [[yii\web\User::identityClass|user identity class]] 应该实现 [[yii\filter
  • Hadoop2.5.2安装——单机模式 eksliang hadoophadoop单机部署
    转载请出自出处：http://eksliang.iteye.com/blog/2185414 一、概述        Hadoop有三种模式 单机模式、伪分布模式和完全分布模式，这里先简单介绍单机模式 ，默认情况下，Hadoop被配置成一个非分布式模式，独立运行JAVA进程，适合开始做调试工作。   二、下载地址 Hadoop 网址http:
  • LoadMoreListView+SwipeRefreshLayout（分页下拉）基本结构 gundumw100 android
    一切为了快速迭代 import java.util.ArrayList; import org.json.JSONObject; import android.animation.ObjectAnimator; import android.os.Bundle; import android.support.v4.widget.SwipeRefreshLayo
  • 三道简单的前端HTML/CSS题目 ini htmlWeb前端css题目
    使用CSS为多个网页进行相同风格的布局和外观设置时，为了方便对这些网页进行修改，最好使用（ ）。http://hovertree.com/shortanswer/bjae/7bd72acca3206862.htm   在HTML中加入<table style=”color:red; font-size:10pt”>，此为（ ）。http://hovertree.com/s
  • overrided方法编译错误 kane_xie override
    问题描述： 在实现类中的某一或某几个Override方法发生编译错误如下： Name clash: The method put(String) of type XXXServiceImpl has the same erasure as put(String) of type XXXService but does not override it   当去掉@Over
  • Java中使用代理IP获取网址内容（防IP被封，做数据爬虫） mcj8089 免费代理IP代理IP数据爬虫JAVA设置代理IP爬虫封IP
    推荐两个代理IP网站：   1. 全网代理IP：http://proxy.goubanjia.com/   2. 敲代码免费IP：http://ip.qiaodm.com/   Java语言有两种方式使用代理IP访问网址并获取内容，   方式一，设置System系统属性   // 设置代理IP System.getProper
  • Nodejs Express 报错之 listen EADDRINUSE qiaolevip 每天进步一点点学习永无止境nodejs纵观千象
    当你启动 nodejs服务报错： >node app Express server listening on port 80 events.js:85 throw er; // Unhandled 'error' event ^ Error: listen EADDRINUSE at exports._errnoException (
  • C++中三种new的用法 _荆棘鸟_ C++new
    转载自：http://news.ccidnet.com/art/32855/20100713/2114025_1.html 作者: mt 其一是new operator，也叫new表达式；其二是operator new，也叫new操作符。这两个英文名称起的也太绝了，很容易搞混，那就记中文名称吧。new表达式比较常见，也最常用，例如： string* ps = new string("
  • Ruby深入研究笔记1 wudixiaotie Ruby
    module是可以定义private方法的 module MTest def aaa puts "aaa" private_method end private def private_method puts "this is private_method" end end
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他