在Centos 6 64bit 上安装 Hyperic HQ 5.8.2.1 中文版
未尽之处，欢迎指正， http://hq.innovatedigital.com/
推荐：用Hyperic HQ 监控诊断网站无法访问问题
环境描述：
[test@tester ~]$ cat /etc/issue CentOS release 6.5 (Final) Kernel \r on an \m [test@tester ~]$ uname -a Linux tester 2.6.32-431.11.2.el6.x86_64 #1 SMP Tue Mar 25 19:59:55 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
用户名：test
口令： test
IP: 192.168.1.103
工作目录： /work
安装文件准备：
下载地址： http://www.innovatedigital.com/download/hyperic_index.asp
下载安装文件： hyperic-hq-installer-x86-64-linux-5.8.2.1.tar.gz ，放在 /work/temp目录下
安装过程
[test@tester work]$ cd /work [test@tester work]$ mkdir hq-zh [test@tester work]$ cd temp [test@tester temp]$ tar xzvf hyperic-hq-installer-x86-64-linux-5.8.2.1.tar.gz hyperic-hq-installer-5.8.2.1/installer/bin/hq-migration-5.8.2.1.zip hyperic-hq-installer-5.8.2.1/installer/lib/ 。。。。。。 此处略去N多行 。。。。。。 hyperic-hq-installer-5.8.2.1/COPYING.txt hyperic-hq-installer-5.8.2.1/setup.sh [test@tester temp]$ cd hyperic-hq-installer-5.8.2.1/ [test@tester hyperic-hq-installer-5.8.2.1]$ ./setup.sh Unpacking JRE to temporary directory /tmp/jre Please ignore references to missing tools.jar Unable to locate tools.jar. Expected to find it in /tmp/lib/tools.jar Loading taskdefs... Taskdefs loaded Initializing Hyperic HQ 5.8.2.1 Installation... Choose which software to install: 1: Hyperic HQ Server 2: Hyperic HQ Agent You may enter multiple choices, separated by commas. 1,2 HQ server installation path [default '/home/hyperic']: /work/hq-zh Enter the fully qualified domain name of the SMTP server that HQ will use to send email messages [default '192.168.1.103']: Enter the email address that HQ will use as the sender for email messages [default '[email protected]']: Choices: 1: Yes 2: No Would you like to use an auto generated encryption key to encrypt the database password? [default '1']: What should the username be for the initial admin user? [default 'hqadmin']: What should the password be for the initial admin user?: （输入初始口令 hqadmin) (again): （再次输入初始口令 hqadmin) What should the email address be for the initial admin user? [default '[email protected]']: HQ agent installation path [default '/work/hq-zh']: Loading install configuration... Install configuration loaded. Preparing to install... Validating agent install configuration... Validating server install configuration... Checking server webapp port... Checking server secure webapp port... Verifying admin user properties Validating server DB configuration... Installing the agent... Looking for previous installation Unpacking /work/temp/hyperic-hq-installer-5.8.2.1/hyperic-hq-agent-x86-64-linux-5.8.2.1.tar.gz to: /work/hq-zh/agent-5.8.2.1... Setting permissions on /work/hq-zh/agent-5.8.2.1... Setting permissions on /work/hq-zh/agent-5.8.2.1/conf/agent.properties... Setting permissions on agent binaries... Fixing line endings on text files... -------------------------------------------------------------------------------- Installation Complete: Agent successfully installed to: /work/hq-zh -------------------------------------------------------------------------------- You can now start your HQ agent by running this command: /work/hq-zh/agent-5.8.2.1/bin/hq-agent.sh start Installing the server... Unpacking server to: /work/hq-zh... Creating server configuration files... Using "small" installing profile... Copying binaries and libraries to server installation... Copying server configuration file... Copying server db-upgrade files... Copying server libs... Setting up server database... Now login to another terminal as root and execute this script: /work/temp/hyperic-hq-installer-5.8.2.1/installer/data/hqdb/tune-os.sh This script sets up the proper shared memory settings to run the built-in database. Press Enter after you run the script to continue this installation.
打开另一终端窗口，进入到 root 用户
[test@tester ~]$ su Password: [root@tester test]# /work/temp/hyperic-hq-installer-5.8.2.1/installer/data/hqdb/tune-os.sh /etc/sysctl.conf defined an adequate kernel.shmmax, not changing anything Tuning completed successfully! [root@tester test]#
回到原窗口：
Setting up JDBC driver... Copying database files... Configuring database... Loading taskdefs... Taskdefs loaded Starting repopulation of configuration table... Waiting for built-in database to start (on port 9432)... Starting built-in database... Preparing database... Loading taskdefs... Taskdefs loaded Loading taskdefs... Taskdefs loaded Loading taskdefs... Taskdefs loaded Waiting for server to stop... Stopping built-in database... Built-in database stopped. Installing the server JRE ... Unpacking JRE amd64-linux-1.7_51.tar.gz to: /work/hq-zh/server-5.8.2.1... Setting permissions on /work/hq-zh/server-5.8.2.1... Setting permissions on server binaries... Fixing line endings on text files... -------------------------------------------------------------------------------- Installation Complete: Server successfully installed to: /work/hq-zh/server-5.8.2.1 -------------------------------------------------------------------------------- You can now start your HQ server by running this command: /work/hq-zh/server-5.8.2.1/bin/hq-server.sh start Note that the first time the HQ server starts up it may take several minutes to initialize. Subsequent startups will be much faster. Once the HQ server reports that it has successfully started, you can log in to your HQ server at: http://192.168.1.103:7080/ username: hqadmin To change your password, log in to the HQ server, click the "Administration" link, choose "List Users", then click on the "hqadmin" user. Setup completed. A copy of the output shown above has been saved to: /work/temp/hyperic-hq-installer-5.8.2.1/installer/logs/hq-install.log Deleting temporary JRE [test@tester hyperic-hq-installer-5.8.2.1]$
运行
[test@tester hyperic-hq-installer-5.8.2.1]$ cd /work/hq-zh/server-5.8.2.1/bin [test@tester bin]$ ./hq-server.sh start Starting HQ Server... [test@tester bin]$ cd /work/hq-zh/agent-5.8.2.1/bin [test@tester bin]$ ./hq-agent.sh start Starting HQ Agent...... running (20732). [ Running agent setup ] What is the HQ server IP address: 192.168.1.103 Should Agent communications to HQ always be secure [default=yes]: What is the HQ server SSL port [default=7443]: - Testing secure connection ... Success What is your HQ login [default=hqadmin]: What is your HQ password: What IP should HQ use to contact the agent [default=192.168.1.103]: What port should HQ use to contact the agent [default=2144]: - Received temporary auth token from agent - Registering agent with HQ The server to agent communication channel is using a self-signed certificate and could not be verified Are you sure you want to continue connecting? [default=no]: yes - HQ gave us the following agent token 1409038071406-733078726523143911-738338007125620383 - Informing agent of new HQ server - Validating - Successfully setup agent [test@tester bin]$
使用
打开浏览器访问 http://192.168.1.103:7080/
未尽之处，欢迎指正， http://hq.innovatedigital.com/