我喜欢在DOS下用QE.EXE来阅读文本文件,自已按键手痛。于是写了个自动向键盘缓冲区放UP
和DOWN键值的程序。
; <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
; 文件名: AutoKey.asm
; 功 能: 自动向键盘缓冲区填充RIGHT 或 DOWN 键值 来移动光标
; Ctrl + Tab 停止填充
; Ctrl + → 填充RIGHT 键值
; Ctrl + ↓ 填充DOWN 键值
; Ctrl + ↑ 提高填充速度
; Ctrl + ← 降低填充速度
;
; 作 者: 黄志斌 2003年2月 广西河池
;
; 申 明: 可以自由转载,应保存完整性.且不能用于商业用途
;
; 说 明:
; 1. 第一次运行时常驻内存,再次运行则撤出内存
; 2. 适用于QE.EXE 和 TC.EXE, 不适于 EDIT.COM
; 3. 改进方向:
; A 在屏幕右上角显示当前速度
; B 填充RIGHT 键值时能自动换行
; 开发环境: IBM PC 486, MSDOS7.0(mswin95), MASM生成
; Log
; -----------------------------------------------------------------------
; 2003.02.24 Created, but the result is exception!
; 2003.02.25
OK!<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
cseg segment
;==============================
org 100h
assume es: cseg, ss: cseg
assume cs: cseg, ds: cseg
UP EQU 48h
Left EQU 4bh
RIGHT EQU 4dh
DOWN EQU 50h
Ctrl EQU 04h
Alt EQU 08h
EndKey EQU 4fh
Tab EQU 0Fh
AddKey EQU 0dh
DecKey EQU 0ch
RightDelay equ 10
DownDelay equ 100
;-----------------------------
start: jmp @Init
;====================
Old1cAddr label dword
Old1cOff dw ?
Old1cSeg dw ?
Old09Addr label dword
Old09Off dw ?
Old09Seg dw ?
mcb_evb dw ? ; mcb: Memmory Control Block
mcb_psp dw ?
show dw 1
count dw 0
FillKey db 0
time dw 0
AutoKey label word
db 00
KeyCode db RIGHT
VarLen equ $ - Old1cAddr
;---------------
new09h proc far
sti
push ax
push bx
push ds
mov ax, 0040h
mov ds, ax
mov bh, ds:[017h]
push cs
pop ds
test bh, Ctrl
jz @old09
in al, 60h
cmp al, Tab ;EndKey
jne @right
mov FillKey, 0
mov KeyCode, 0
jmp @Old09
@right:
cmp al, RIGHT
jnz @down
mov byte ptr KeyCode, RIGHT
mov time, RightDelay
jmp @AutoON
@down:
cmp al, DOWN
jnz @up
mov byte ptr KeyCode, DOWN
mov time, DownDelay
jmp @AutoON
@up:
cmp al, UP
jnz @left
cmp word ptr time, 1
je @Old09
dec time
jmp @ClrCount ;jmp @Old09
@left:
cmp al, LEFT
jnz @Old09
cmp word ptr time, 0ffffh
je @Old09
inc time
;jmp @ClrCount
@AutoON:
mov FillKey, 1
@ClrCount:
mov count, 0
@Old09:
pop ds
pop bx
pop ax
jmp cs:Old09Addr
new09h endp
new1ch proc far
cmp byte ptr cs:FillKey, 1
jne @Old1c
push ds
push cs
pop ds
inc count
mov ax, time
cmp ax, count
jne n1c
mov count, 0
push ax
push bx
mov ax, 0040h
mov ds, ax
cli
mov bx, word ptr ds:[001ch]
mov ax, cs: AutoKey
mov [bx], ax
inc bx
inc bx
cmp bx, 003eh
jnz @NoTail
mov bx, 001eh
@NoTail:
mov ax, bx
mov bx, 001ch
mov [bx], ax
sti
pop bx
pop ax
n1c:
pop ds
@Old1c:
jmp cs:Old1cAddr
new1ch endp
@Init:
mov ax, 3509h ; Get current 1ch interrupt vector
int 21h
cmp bx, offset new09h ; Has been Intalled?
jnz @install ; No install
mov dx, offset strMsgUninstall
mov ah, 09h
int 21h
mov bx, 1ch * 04h ; Restore old 1ch interrupt vector
xor ax, ax ; to System interrupt vector talbe
mov ds, ax
mov ax, es:[Old1cOff]
mov ds:[bx], ax
mov ax, es:[Old1cSeg]
mov ds:[bx+2], ax
mov bx, 09h * 04h ; Restore old 09h interrupt vector
mov ax, es:[Old09Off] ; to System interrupt vector talbe
;xor ax, ax
;mov ds, ax ; ds must equal 0
mov ds:[bx], ax
mov ax, es:[Old09Seg]
mov ds:[bx+2], ax
mov bx, 1 ; Release evirenment parameter block
mov ax, es:[mcb_evb]
mov ds, ax
mov word ptr ds:[bx], 0
mov ax, es:[mcb_psp] ; Release TSR
mov ds, ax
mov word ptr ds:[bx], 0
mov ax, 4c00h
int 21h
@install:
;mov ax, 3509h ; Get current 1ch interrupt vector
;int 21h
mov Old09Seg, es ; Store current 09h interrupt vector
mov Old09Off, bx
mov dx, offset new09h ; Set new 09h interrupt vector
mov ax, 2509h
int 21h
mov ax, 351ch ; Get current 1ch interrupt vector
int 21h
mov Old1cSeg, es ; Store current 1ch interrupt vector
mov Old1cOff, bx
mov dx, offset new1ch ; Set new 1ch interrupt vector
mov ax, 251ch
int 21h
mov dx, offset strMsgInstall
mov ah, 09h
int 21h
; Store the address of evirenment parameter block
mov ax, cs
dec ax
mov [mcb_psp], ax ;mov cs:[mcb_psp], ax
mov bx, 2ch
mov ax, [bx] ;mov ax, cs:[bx]
dec ax
mov cs:[mcb_evb], ax
mov dx, offset @Init
add dx, VarLen + 2
mov cl, 04h
shr dx, cl
mov ax, 3100h
int 21h
;====================
strMsgInstall db 07h, "AutoKey installed!$"
strMsgUninstall db 07h, "AutoKey uninstalled!$"
cseg ends
end start
