CentOS 6.3 3.7.1 dmesg

Linux version 3.7.1_SR4 (mud@mud-centos) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Tue Dec 18 21:50:34 CST 2012
Command line: ro root=/dev/sda7 quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000ca0e1fff] usable
BIOS-e820: [mem 0x00000000ca0e2000-0x00000000ca70bfff] reserved
BIOS-e820: [mem 0x00000000ca70c000-0x00000000ca94afff] ACPI NVS
BIOS-e820: [mem 0x00000000ca94b000-0x00000000ca961fff] ACPI data
BIOS-e820: [mem 0x00000000ca962000-0x00000000ca98bfff] ACPI NVS
BIOS-e820: [mem 0x00000000ca98c000-0x00000000ca990fff] ACPI data
BIOS-e820: [mem 0x00000000ca991000-0x00000000ca9d3fff] ACPI NVS
BIOS-e820: [mem 0x00000000ca9d4000-0x00000000cadc7fff] usable
BIOS-e820: [mem 0x00000000cadc8000-0x00000000caff2fff] reserved
BIOS-e820: [mem 0x00000000caff3000-0x00000000caffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Hasee Computer Co., Ltd. PAF4/A24, BIOS 206 03/27/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FE0000000 write-back
  2 base 220000000 mask FF0000000 write-back
  3 base 0E0000000 mask FE0000000 uncachable
  4 base 0D0000000 mask FF0000000 uncachable
  5 base 0CC000000 mask FFC000000 uncachable
  6 base 0CB800000 mask FFF800000 uncachable
  7 base 22F800000 mask FFF800000 uncachable
  8 base 22F600000 mask FFFE00000 uncachable
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000096000] 96000 size 28672
init_memory_mapping: [mem 0x00000000-0xcaffffff]
 [mem 0x00000000-0xcaffffff] page 2M
kernel direct mapping tables up to 0xcaffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22f5fffff]
 [mem 0x100000000-0x22f5fffff] page 2M
kernel direct mapping tables up to 0x22f5fffff @ [mem 0xcaffa000-0xcaffffff]
ACPI: RSDP 00000000000f0450 00024 (v02   PEGA)
ACPI: XSDT 00000000ca94b078 00064 (v01 ACRSYS ACRPRDCT 00000001 AMI  00010013)
ACPI: FACP 00000000ca95fbe8 000F4 (v04   PEGA   PEGANB 00000001 AMI  00010013)
ACPI: DSDT 00000000ca94b168 14A7D (v02   PEGA   PEGANB 00000000 INTL 20051117)
ACPI: FACS 00000000ca989f80 00040
ACPI: APIC 00000000ca95fce0 00072 (v03   PEGA   PEGANB 00000001 AMI  00010013)
ACPI: ECDT 00000000ca95fd58 000C1 (v01   PEGA   PEGANB 00000001 AMI. 00000005)
ACPI: MCFG 00000000ca95fe20 0003C (v01   PEGA   PEGANB 00000001 MSFT 00000097)
ACPI: HPET 00000000ca95fe60 00038 (v01   PEGA   PEGANB 00000001 AMI. 00000005)
ACPI: SSDT 00000000ca95fe98 00986 (v01   PEGA   PEGANB 00003000 INTL 20051117)
ACPI: SSDT 00000000ca960820 00A92 (v01   PEGA   PEGANB 00003000 INTL 20051117)
ACPI: SLIC 00000000ca97e4e0 00176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x22f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009cfff]
  node   0: [mem 0x00100000-0x1fffffff]
  node   0: [mem 0x20200000-0x40003fff]
  node   0: [mem 0x40005000-0xca0e1fff]
  node   0: [mem 0xca9d4000-0xcadc7fff]
  node   0: [mem 0xcaff3000-0xcaffffff]
  node   0: [mem 0x100000000-0x22f5fffff]
On node 0 totalpages: 2070639
  DMA zone: 64 pages used for memmap
  DMA zone: 7 pages reserved
  DMA zone: 3910 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 807714 pages, LIFO batch:31
  Normal zone: 19416 pages used for memmap
  Normal zone: 1223208 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 00000000ca0e2000 - 00000000ca70c000
PM: Registered nosave memory: 00000000ca70c000 - 00000000ca94b000
PM: Registered nosave memory: 00000000ca94b000 - 00000000ca962000
PM: Registered nosave memory: 00000000ca962000 - 00000000ca98c000
PM: Registered nosave memory: 00000000ca98c000 - 00000000ca991000
PM: Registered nosave memory: 00000000ca991000 - 00000000ca9d4000
PM: Registered nosave memory: 00000000cadc8000 - 00000000caff3000
PM: Registered nosave memory: 00000000cb000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xcb000000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88022f200000 s72576 r8192 d21632 u524288
pcpu-alloc: s72576 r8192 d21632 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2034832
Kernel command line: ro root=/dev/sda7 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 8062808k/9164800k available (6053k kernel code, 882244k absent, 219748k reserved, 2521k data, 516k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
    CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:4352 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.190 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.38 BogoMIPS (lpj=2494190)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120913
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
smpboot: Booting Node   0, Processors  #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19953.52 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xca70c000-0xca94afff] (2355200 bytes)
PM: Registering ACPI NVS region [mem 0xca962000-0xca98bfff] (172032 bytes)
PM: Registering ACPI NVS region [mem 0xca991000-0xca9d3fff] (274432 bytes)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000ca6b4018 007DB (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 007DB (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000ca6b5a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000ca6b6c18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf6400000-0xf67fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7300000-0xf730ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf731a000-0xf731a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7318000-0xf73183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7310000-0xf7313fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7317000-0xf73173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xf7316000-0xf73167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7315000-0xf73150ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
pci 0000:01:00.0: [10de:0fd2] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xf6800000-0xf71fffff]
pci 0000:00:1c.2:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP00._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f
 pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xca0e2000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcadc8000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0081-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x002e-0x002f]
pnp 00:04: [io  0x004e-0x004f]
pnp 00:04: [io  0x0061]
pnp 00:04: [io  0x0063]
pnp 00:04: [io  0x0065]
pnp 00:04: [io  0x0067]
pnp 00:04: [io  0x0070]
pnp 00:04: [io  0x0080]
pnp 00:04: [io  0x0092]
pnp 00:04: [io  0x00b2-0x00b3]
pnp 00:04: [io  0x0680-0x069f]
pnp 00:04: [io  0x0200-0x020f]
pnp 00:04: [io  0xffff]
pnp 00:04: [io  0xffff]
pnp 00:04: [io  0x0400-0x0453]
pnp 00:04: [io  0x0458-0x047f]
pnp 00:04: [io  0x0500-0x057f]
pnp 00:04: [io  0x164e-0x164f]
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0x0200-0x020f] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0x0400-0x0453] has been reserved
system 00:04: [io  0x0458-0x047f] has been reserved
system 00:04: [io  0x0500-0x057f] has been reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io  0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0454-0x0457]
system 00:06: [io  0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0044-0x005f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io  0x0010-0x001f]
pnp 00:09: [io  0x0022-0x003f]
pnp 00:09: [io  0x0044-0x005f]
pnp 00:09: [io  0x0063]
pnp 00:09: [io  0x0065]
pnp 00:09: [io  0x0067-0x006f]
pnp 00:09: [io  0x0072-0x007f]
pnp 00:09: [io  0x0080]
pnp 00:09: [io  0x0084-0x0086]
pnp 00:09: [io  0x0088]
pnp 00:09: [io  0x008c-0x008e]
pnp 00:09: [io  0x0090-0x009f]
pnp 00:09: [io  0x00a2-0x00bf]
pnp 00:09: [io  0x00e0-0x00ef]
pnp 00:09: [io  0x04d0-0x04d1]
pnp 00:09: [io  0x0400-0x047f]
pnp 00:09: [io  0x0500-0x057f]
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x0400-0x047f] could not be reserved
system 00:09: [io  0x0500-0x057f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xfec10000-0xfec17fff]
pnp 00:0a: [mem 0xfec18000-0xfec1ffff]
pnp 00:0a: [mem 0xfec20000-0xfec27fff]
pnp 00:0a: [mem 0xfec28000-0xfec2ffff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [io  0x025d]
pnp 00:0a: [io  0x025c]
system 00:0a: [io  0x025d] has been reserved
system 00:0a: [io  0x025c] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
system 00:0a: [mem 0xfec28000-0xfec2ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs SYN1d1d SYN1d00 SYN0002 PNP0f13 (active)
pnp 00:0c: [io  0x0060]
pnp 00:0c: [io  0x0064]
pnp 00:0c: [irq 1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0d: [io  0x0240-0x0259]
system 00:0d: [io  0x0240-0x0259] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0e: [mem 0xfed10000-0xfed17fff]
pnp 00:0e: [mem 0xfed18000-0xfed18fff]
pnp 00:0e: [mem 0xfed19000-0xfed19fff]
pnp 00:0e: [mem 0xf8000000-0xfbffffff]
pnp 00:0e: [mem 0xfed20000-0xfed3ffff]
pnp 00:0e: [mem 0xfed90000-0xfed93fff]
pnp 00:0e: [mem 0xfed45000-0xfed8ffff]
pnp 00:0e: [mem 0xff000000-0xffffffff]
pnp 00:0e: [mem 0xfee00000-0xfeefffff]
pnp 00:0e: [mem 0xcfa00000-0xcfa00fff]
system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0e: [mem 0xff000000-0xffffffff] has been reserved
system 00:0e: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0e: [mem 0xcfa00000-0xcfa00fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0x000fffff disabled]
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xcfb00000-0xcfcfffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xcfd00000-0xcfefffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xcfb00000-0xcfcfffff]
pci 0000:00:1c.0:   bridge window [mem 0xcfd00000-0xcfefffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xf6800000-0xf71fffff]
pci 0000:00:1c.2:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xcfb00000-0xcfcfffff]
pci_bus 0000:02: resource 2 [mem 0xcfd00000-0xcfefffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf6800000-0xf71fffff]
pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc60e2000-0xca0e1fff] (64MB) mapped at [ffff8800c60e2000-ffff8800ca0e1fff]
sha1_ssse3: Using AVX optimized SHA-1 implementation
audit: initializing netlink socket (disabled)
type=2000 audit(1355867601.147:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/O].
msgmni has been set to 15747
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:00.0: Intel Ivybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 65536K stolen memory
i915 0000:00:02.0: setting latency timer to 64
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
fbcon: inteldrmfb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2494.336 MHz
Switching to clocksource tsc
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input3
acpi device:3e: registered as cooling_device4
ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316200 irq 42
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: irq 43 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000056000, e8:40:f2:f0:a8:e8, XID 0c900800 IRQ 43
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000060000, irq=17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7318000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7317000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7300000
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-realtek
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
rtc_cmos 00:05: setting system clock to 2012-12-18 21:53:23 UTC (1355867603)
ALSA device list:
  #0: HDA Intel PCH at 0xf7310000 irq 45
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/90:05:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ATAPI: Optiarc DVD RW AD-7740H, 1.00, max UDMA/100
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/90:05:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: configured for UDMA/100
ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10001, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7740H  1.00 PQ: 0 ANSI: 5
ACPI: Invalid Power Resource to register!
ACPI: Invalid Power Resource to register!<6>usb 1-1: new high-speed USB device number 2 using ehci_hcd
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 3-2: new full-speed USB device number 2 using xhci_hcd
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input6
hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input7
hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2/input1
usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 641896
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
devtmpfs: mounted
Freeing unused kernel memory: 516k freed
readahead-collector: starting
udev: starting version 147
udevd (264): /proc/264/oom_adj is deprecated, please use /proc/264/oom_score_adj instead.
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Adding 2047996k swap on /dev/sda8.  Priority:-1 extents:1 across:2047996k
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.20)
wlan0: authenticate with 5c:63:bf:9f:2b:aa
wlan0: send auth to 5c:63:bf:9f:2b:aa (try 1/3)
wlan0: authenticated
wlan0: associate with 5c:63:bf:9f:2b:aa (try 1/3)
wlan0: RX AssocResp from 5c:63:bf:9f:2b:aa (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from 5c:63:bf:9f:2b:aa (Reason: 6)
cfg80211: Calling CRDA for country: US
ath: regdomain 0x8348 updated by CountryIE
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Regulatory domain changed to country: US
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
wlan0: authenticate with 5c:63:bf:9f:2b:aa
wlan0: send auth to 5c:63:bf:9f:2b:aa (try 1/3)
wlan0: authenticated
wlan0: associate with 5c:63:bf:9f:2b:aa (try 1/3)
wlan0: RX AssocResp from 5c:63:bf:9f:2b:aa (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: regdomain 0x8348 updated by CountryIE
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Regulatory domain changed to country: US
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

你可能感兴趣的:(linux,centos,kernel,dmesg)