Now the pocket has to be bu

Cellphone Charging Hanger

At first Silver Satin and crepe Canonita 100mm I cut a hole into the felt just as big as the plug of the plug of the charger is.

Then I sewed the inner velvet cloth to the piece of felt. Therefore I started at the upper side and fixed the peace of cloth with the velvet side down, so that you can't see the seam afterwards.

At the end of the piece of felt the piece White Satin and crepe Canonita 100mm of velvet has to be fixed so that there aren't any folds. I turned down the velvet Black Satin and crepe Canonita 100mm so that there is a neat end.

Now stitch it together. the sides can be left open until the next step comes.

Now the pocket has to be build. Carefully fold the felt with the velvet cloth on it so that the pocket is created. And turn the velvet at the sides between the felt and the cloth and.

then fix everything with needles! Crossing two needles will help because otherwise they tend to fall out again.

To sew everything together, you have to press it together. (For the design Black Leather Cathay 100mm of it, I wanted some of the red cloth to look through at the sides a bit more, as it did in the end)