linux smartd failed
linux smartd failed
2009-03-15 17:29
|
最近爱上linux，因为他的GUN精神，于是在努力学习，是用虚拟机装的，怕木有办法直接驾驭这个性格有点怪但是很有魅力的系统，开机时总是显示smartd进程失败，于是找到相关技术文章，分享下。
其实还有个问题，我的linux没有声音，声卡是正常的，但测试声音就是没有，下一个目标就是解决这个，呵呵~~
smartd是一个守护进程（一个帮助程序），它能监视拥有自我监视，分析和汇报技术(Self-Monitoring,
Analysis, and Reporting Technology - SMART)的硬盘。 SMART系统使得硬盘能监视并汇报自己的运行状况。它的一个重要特性是能够预测失败，使得系统管理员 能避免数据丢失。 smartd由kernel-utils包缺省安装。用命令 rpm -ql kernel-utils 可以列出kernel-utils包中的文件。 smartd守护进程通常在系统启动的时候被开启，它的配置文件是/etc/smartd.conf。 比如，假设有两个硬盘被安装，/dev/hda和/dev/hdb。一个是CD_ROM设备，另一个是硬盘。为了检测它们 是否支持SMART，使用命令 smartctl -i /dev/hda 和 smartctl -i /dev/hdb： # /usr/sbin/smartctl -i /dev/hda smartctl version 5.1-11 Copyright (C) 2002-3 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST380011A Serial Number: 3JVB672N Firmware Version: 8.01 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Fri Aug 20 14:09:16 2004 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled ”SMART support is: Available - device has SMART capability.“这行说明支持SMART。"SMART support is: Enabled”这行说明SMART已经被打开。 CD-ROM设备和旧式的硬盘不支持SMART，这可以从smartctl -i /dev/hdb的输出看出： # /usr/sbin/smartctl -i /dev/hdb smartctl version 5.1-11 Copyright (C) 2002-3 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: LTN526D Serial Number: [No Information Found] Firmware Version: 9S03 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Aug 20 14:24:43 2004 EST SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Unavailable - device lacks SMART capability. A mandatory SMART command has failed: exiting. To continue, use the -T option to set the tolerance level to 'permissive' 注意有些硬盘控制器不支持SMART。比如有些硬件RAID控制器不支持，或者不会传递SMART信息，即使加入 的硬盘支持SMART。 可以修改/etc/smartctl.conf文件，使得smartd只监视你想监视的设备。假设只有/dev/hda需要被监视， 在该设备上如果有警告信息发生，需要把它发给根用户，那么/etc/smartd.conf需要这样修改： # /etc/smartd.conf # Sample configuration file for smartd. See man 5 smartd.conf. # Home page is: http://smartmontools.sourceforge.net ... # A very silent check. Only report SMART health status if it fails # But send an email in this case /dev/hda -a -m [email protected] ... 编辑完/etc/smartd.conf，重启该守护进程： # /sbin/service smartd restart Shutting down smartd: [FAILED] Starting smartd: [ OK ] 要设置smartd在系统启动时候被激活，在根用户下用 chkconfig smartd on 命令。 关闭smartd服务自动启动 root LINUX smartd is a daemon that monitors the Self-Monitoring, Analysis and Reporting Technology (SMART) system built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests. This version of smartd is compatible with ATA/ATAPI-7 and earlier standards 简单地说，smartd是监控硬盘的可靠性并预测其失败、进行测试的守护进程！ 仔细看看smartd的说明即可！（man smartd） ＃chkconfig smartd off 这是关闭smartd服务自动启动，机器重新启动时smartd不再运行！ |