RAC 存储挂载与磁盘划分

openfiles 配置管理地址: https://192.168.62.238:446/   //openfiles 安装服务器）
节点1服务器安装iscsi客户端包,并挂载磁盘:
[root@node1 opt]# rpm -qa |grep iscsi
[root@node1 opt]# rpm -ivh iscsi-initiator-utils-6.2.0.871-0.20.el5_5.i386.rpm
warning: iscsi-initiator-utils-6.2.0.871-0.20.el5_5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 192a7d7d
Preparing...                ########################################### [100%]
   1:iscsi-initiator-utils  ########################################### [100%]
[root@node1 opt]# service iscsi start
iscsid is stopped
Starting iSCSI daemon:                                     [  OK  ]
                                                           [  OK  ]
Setting up iSCSI targets: iscsiadm: No records found!
                                                           [  OK  ]
[root@node1 opt]# chkconfig --list |grep iscsi
iscsi           0:off 1:off 2:off 3:on 4:on 5:on 6:off
iscsid          0:off 1:off 2:off 3:on 4:on 5:on 6:off
[root@node1 opt]# iscsiadm -m discovery -t sendtargets -p 192.168.62.238:3260
192.168.62.238:3260,1 iqn.2006-01.com.openfiler:tsn.045e630ffbf1
[root@node1 opt]# iscsiadm -m node -p 192.168.62.238 -l login
Logging in to [iface: default, target: iqn.2006-01.com.openfiler:tsn.045e630ffbf1, portal: 192.168.62.238,3260]
Login to [iface: default, target: iqn.2006-01.com.openfiler:tsn.045e630ffbf1, portal: 192.168.62.238,3260]: successful

节点2服务器安装iscsi客户端包,并挂载磁盘:
[root@node2 opt]# rpm -qa |grep iscsi
[root@node2 opt]# rpm -ivh iscsi-initiator-utils-6.2.0.871-0.20.el5_5.i386.rpm
warning: iscsi-initiator-utils-6.2.0.871-0.20.el5_5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 192a7d7d
Preparing...                ########################################### [100%]
   1:iscsi-initiator-utils  ########################################### [100%]

[root@node2 opt]# service iscsi start
iscsid is stopped
Starting iSCSI daemon:                                     [  OK  ]
                                                           [  OK  ]
Setting up iSCSI targets: iscsiadm: No records found!
                                                           [  OK  ]
[root@node2 opt]# iscsiadm -m discovery -t sendtargets -p 192.168.62.238:3260
192.168.62.238:3260,1 iqn.2006-01.com.openfiler:tsn.045e630ffbf1
[root@node2 opt]# iscsiadm -m node -p 192.168.62.238 -l login
Logging in to [iface: default, target: iqn.2006-01.com.openfiler:tsn.045e630ffbf1, portal: 192.168.62.238,3260]
Login to [iface: default, target: iqn.2006-01.com.openfiler:tsn.045e630ffbf1, portal: 192.168.62.238,3260]: successful

将挂载好的磁盘进行磁盘划分(此操作只需要在1个节点操作即可):
[root@node2 /]# fdisk -l

Disk /dev/sda: 12.8 GB, 12884901888 bytes
255 heads, 63 sectors/track, 1566 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          25      200781   83  Linux
/dev/sda2              26         216     1534207+  82  Linux swap / Solaris
/dev/sda3             217        1566    10843875   83  Linux

Disk /dev/sdb: 21.4 GB, 21441282048 bytes        //挂载上的存储磁盘
64 heads, 32 sectors/track, 20448 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

Disk /dev/sdb doesn't contain a valid partition table
[root@node2 /]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

The number of cylinders for this disk is set to 20448.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-20448, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-20448, default 20448): +120M

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (116-20448, default 116):
Using default value 116
Last cylinder or +size or +sizeM or +sizeK (116-20448, default 20448): +120M

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (231-20448, default 231):
Using default value 231
Last cylinder or +size or +sizeM or +sizeK (231-20448, default 20448): +120M

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
e
Selected partition 4
First cylinder (346-20448, default 346):
Using default value 346
Last cylinder or +size or +sizeM or +sizeK (346-20448, default 20448):
Using default value 20448

Command (m for help): n
First cylinder (346-20448, default 346):
Using default value 346
Last cylinder or +size or +sizeM or +sizeK (346-20448, default 20448): +200M

Command (m for help): n
First cylinder (538-20448, default 538):
Using default value 538
Last cylinder or +size or +sizeM or +sizeK (538-20448, default 20448): +200M

Command (m for help): n
First cylinder (730-20448, default 730):
Using default value 730
Last cylinder or +size or +sizeM or +sizeK (730-20448, default 20448): +4500M

Command (m for help): n
First cylinder (5023-20448, default 5023):
Using default value 5023
Last cylinder or +size or +sizeM or +sizeK (5023-20448, default 20448): +4500M

Command (m for help): n
First cylinder (9316-20448, default 9316):
Using default value 9316
Last cylinder or +size or +sizeM or +sizeK (9316-20448, default 20448): +4500M

Command (m for help): n
First cylinder (13609-20448, default 13609):
Using default value 13609
Last cylinder or +size or +sizeM or +sizeK (13609-20448, default 20448): +4500M

Command (m for help): n
First cylinder (17902-20448, default 17902):
Using default value 17902
Last cylinder or +size or +sizeM or +sizeK (17902-20448, default 20448):
Using default value 20448

Command (m for help): p

Disk /dev/sdb: 21.4 GB, 21441282048 bytes
64 heads, 32 sectors/track, 20448 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         115      117744   83  Linux
/dev/sdb2             116         230      117760   83  Linux
/dev/sdb3             231         345      117760   83  Linux
/dev/sdb4             346       20448    20585472    5  Extended
/dev/sdb5             346         537      196592   83  Linux
/dev/sdb6             538         729      196592   83  Linux
/dev/sdb7             730        5022     4396016   83  Linux
/dev/sdb8            5023        9315     4396016   83  Linux
/dev/sdb9            9316       13608     4396016   83  Linux
/dev/sdb10          13609       17901     4396016   83  Linux
/dev/sdb11          17902       20448     2608112   83  Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.