bust-size

Given that an explicit burst size value was not specified, the policer’s burst tolerance is set to the recommended value for a low-speed interface, which is ten times the interface’s MTU. For a high-speed interface, such as an OC-192, the recommended burst size is the transmit rate of the interface times 3–5 milliseconds.

juniper@LAB# set firewall policer width if-exceeding burst-size-limit ?         
Possible completions:
  <burst-size-limit>   Burst size limit (1500..100000000000 bytes)

低速链路上,使用10倍的的MTU

高速链路,如10G链路,则使用3-5倍的毫秒速率

OC192=10Gbps=10mbits/ms

3X10mbits per millisends=30mbits/ms,需要更改单位为bytes? ?=3750k

你可能感兴趣的:(职场,休闲,JNCIE,bust-size)