以太网链路聚合配置1（手动模式的链路聚合）

<Huawei>

Aug 25 2015 09:26:52-08:00 Huawei %%01PHY/1/PHY(l)[0]:    GigabitEthernet0/0/1: c

hange status to up

Aug 25 2015 09:26:52-08:00 Huawei %%01IFNET/4/IF_STATE(l)[1]:Interface Vlanif1 ha

s turned into UP state.

Aug 25 2015 09:26:52-08:00 Huawei %%01PHY/1/PHY(l)[2]:    GigabitEthernet0/0/2: c

hange status to up

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sys s1

[s1]

Aug 25 2015 09:27:27-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 4, the chan

ge loop count is 0, and the maximum number of records is 4095.

[s1]int

[s1]interface gi

[s1]interface GigabitEthernet 0/0/1

[s1-GigabitEthernet0/0/1]und

[s1-GigabitEthernet0/0/1]undo ne

[s1-GigabitEthernet0/0/1]undo negotiation auto

[s1-GigabitEthernet0/0/1]

Aug 25 2015 09:28:07-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 5, the chan

ge loop count is 0, and the maximum number of records is 4095.

[s1-GigabitEthernet0/0/1]sp

[s1-GigabitEthernet0/0/1]speed 100

[s1-GigabitEthernet0/0/1]

Aug 25 2015 09:28:17-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 6, the chan

ge loop count is 0, and the maximum number of records is 4095.du

                            ^

Error:Incomplete command found at '^' position.

[s1-GigabitEthernet0/0/1]dup

                             ^

Error:Incomplete command found at '^' position.

[s1-GigabitEthernet0/0/1]du

[s1-GigabitEthernet0/0/1]duplex fu

[s1-GigabitEthernet0/0/1]duplex full 

[s1-GigabitEthernet0/0/1]q

[s1]int

[s1]interface gi

[s1]interface GigabitEthernet 0/0

Aug 25 2015 09:28:37-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 7, the chan

ge loop count is 0, and the maximum number of records is 4095./

                              ^

Error: Wrong parameter found at '^' position.

[s1]interface GigabitEthernet 0/0/2

[s1-GigabitEthernet0/0/2]und

[s1-GigabitEthernet0/0/2]undo ne

[s1-GigabitEthernet0/0/2]undo negotiation au

[s1-GigabitEthernet0/0/2]undo negotiation auto 

[s1-GigabitEthernet0/0/2]sp

[s1-GigabitEthernet0/0/2]speed 100

[s1-GigabitEthernet0/0/2]

Aug 25 2015 09:28:57-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 9, the chan

ge loop count is 0, and the maximum number of records is 4095.

[s1-GigabitEthernet0/0/2]du

[s1-GigabitEthernet0/0/2]duplex fu

[s1-GigabitEthernet0/0/2]duplex full 

[s1-GigabitEthernet0/0/2]q

[s1]dis

[s1]display 

Aug 25 2015 09:29:07-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 10, the cha

nge loop count is 0, and the maximum number of records is 4095.

            ^

Error:Incomplete command found at '^' position.

[s1]ds

[s1]dis

[s1]display cu

[s1]display current-configuration 

#

sysname s1

#

cluster enable

ntdp enable

ndp enable

#

drop illegal-mac alarm

#

diffserv domain default

#

drop-profile default

#

aaa

 authentication-scheme default

 authorization-scheme default

 accounting-scheme default

 domain default

 domain default_admin

 local-user admin password simple admin

 local-user admin service-type http

#

interface Vlanif1

#

interface MEth0/0/1

#

interface GigabitEthernet0/0/1

 undo negotiation auto

 speed 100

#

interface GigabitEthernet0/0/2

 undo negotiation auto

 speed 100

#

interface GigabitEthernet0/0/3

#

interface GigabitEthernet0/0/4

#

interface GigabitEthernet0/0/5

#

interface GigabitEthernet0/0/6

#

interface GigabitEthernet0/0/7

#

interface GigabitEthernet0/0/8

#

interface GigabitEthernet0/0/9

#

interface GigabitEthernet0/0/10

#

interface GigabitEthernet0/0/11

#

interface GigabitEthernet0/0/12

#

interface GigabitEthernet0/0/13

#

interface GigabitEthernet0/0/14

#

interface GigabitEthernet0/0/15

#

interface GigabitEthernet0/0/16

#

interface GigabitEthernet0/0/17

#

interface GigabitEthernet0/0/18

#

interface GigabitEthernet0/0/19

#

interface GigabitEthernet0/0/20

#

interface GigabitEthernet0/0/21

#

interface GigabitEthernet0/0/22

#

interface GigabitEthernet0/0/23

#

interface GigabitEthernet0/0/24

#

interface NULL0

#

user-interface con 0

user-interface vty 0 4

#

return

[s1]

[s1]

[s1]

[s1]

[s1]

[s1]dis

[s1]display int

[s1]display interface gi

[s1]display interface GigabitEthernet 0/0/1

GigabitEthernet0/0/1 current state : UP

Line protocol current state : UP

Description:

Switch Port, PVID :    1, TPID : 8100(Hex), The Maximum Frame Length is 9216

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc9c-08f2

Last physical up time   : 2015-08-25 09:26:52 UTC-08:00

Last physical down time : 2015-08-25 09:26:33 UTC-08:00

Current system time: 2015-08-25 09:29:46-08:00

Hardware address is 4c1f-cc9c-08f2

    Last 300 seconds input rate 0 bytes/sec, 0 packets/sec

    Last 300 seconds output rate 0 bytes/sec, 0 packets/sec

    Input: 11662 bytes, 98 packets

    Output: 595 bytes, 5 packets

    Input:

      Unicast: 0 packets, Multicast: 98 packets

      Broadcast: 0 packets

    Output:

      Unicast: 0 packets, Multicast: 5 packets

      Broadcast: 0 packets

    Input bandwidth utilization  :    0%

    Output bandwidth utilization :    0%

[s1]

[s1]int

[s1]interface et

[s1]interface Eth-Trunk 1

[s1-Eth-Trunk1]q

[s1]int

[s1]interface gi

[s1]interface GigabitEthernet 0/0/1

[s1-GigabitEthernet0/0/1]et

[s1-GigabitEthernet0/0/1]eth-trunk 1

Info: This operation may take a few seconds. Please wait for a moment...done.

[s1-GigabitEthernet0/0/1]

Aug 25 2015 09:33:35-08:00 s1 %%01IFNET/4/IF_STATE(l)[3]:Interface Eth-Trunk1 has

 turned into UP state.q

[s1]

Aug 25 2015 09:33:37-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 11, the cha

nge loop count is 0, and the maximum number of records is 4095.

[s1]int

[s1]interface gi

[s1]interface GigabitEthernet 0/0/2

[s1-GigabitEthernet0/0/2]eth

[s1-GigabitEthernet0/0/2]eth-trunk 1

Info: This operation may take a few seconds. Please wait for a moment...done.

[s1-GigabitEthernet0/0/2]q

[s1]

Aug 25 2015 09:33:57-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1

91.3.1 configurations have been changed. The current change number is 12, the cha

nge loop count is 0, and the maximum number of records is 4095.

[s1]dis

[s1]display eth

[s1]display eth-trunk 1

Eth-Trunk1's state information is:

WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         

Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              

Operate status: up          Number Of Up Port In Trunk: 2                     

--------------------------------------------------------------------------------

PortName                      Status      Weight 

GigabitEthernet0/0/1          Up          1      

GigabitEthernet0/0/2          Up          1      

本文出自 “竹笛个人博客” 博客，谢绝转载！