NIS+AUTOFOFS+NFS

安装NIS所需要的软件包:
 
ypserv-2.19-3
 
yp-tools-2.9-0.1
 
ypbind-1.19-8.el5
 
portmap-4.0-65.2.2.1
 
这里通过配置好的yum安装:yum -y install yp*
 
# vim /etc/sysconfig/network
 
NETWORKING=yes
 NETWORKING_IPV6=no
 HOSTNAME=server.example.com
 NISDOMAIN=lanv_11
 
# vim /etc/yp.conf
domain lanv_11 service 192.168.137.254
 ---------添加一行
 
#service ypserv restart
 -------------重启ypserv
 

 

# cd /var/yp/
 [root@server yp]# /usr/lib64/yp/ypinit -m ----------32位系统是[root@server yp]# /usr/lib/yp/ypinit -m
 At this point, we have to construct a list of the hosts which will run NIS
 servers.
 server.example.com is in the list of NIS server hosts.
 Please
continue to add
 the names for the other hosts, one per line. When you are done with the
 list, type a <control D>.
 ---------按ctrl +D 完成配置
 next host to add:
 server.example.com
 next host to add:
 
The current list of NIS servers looks like this:
 
server.example.com
 
Is this correct?
 [y/n: y]
 y
 We need a few minutes to build the databases...
 Building /var/yp/lanv_11/ypservers...
 Running /var/yp/Makefile...
 gmake[1]: Entering directory `/var/yp/lanv_11'
 Updating passwd.byname...
 Updating passwd.byuid...
 Updating group.byname...
 Updating group.bygid...
 Updating hosts.byname...
 Updating hosts.byaddr...
 Updating rpc.byname...
 Updating rpc.bynumber...
 Updating services.byname...
 Updating services.byservicename...
 Updating netid.byname...
 Updating protocols.bynumber...
 Updating protocols.byname...
 Updating mail.aliases...
 gmake[1]: Leaving directory `/var/yp/lanv_11'
 
server.example.com has been set up as a NIS master server.
 
Now you can run ypinit -s server.example.com on all slave server.
 

[root@server yp]# make
 gmake[1]: Entering directory `/var/yp/lanv_11'
 Updating netid.byname...
 gmake[1]: Leaving directory `/var/yp/lanv_11'
 

[root@server yp]# chkconfig portmap on
 [root@server yp]# chkconfig nfs on
 [root@server yp]# chkconfig ypserv on
 [root@server yp]# chkconfig ypbind on
 #mkdir /rhome
 #useradd nisuser01 -d /rhome/nisuser01
 #passwd nisuser01
 #cd /var/yp
 #make
 每建立一个用户,要到/var/yp
 更新即make
 NIS的服务器设置好了
 
NFS服务配置:
 nfs服务为linux内核级服务,默认是已经装好的
 [root@server /]# vim /etc/exports
/rhome
 192.168.137.0/255.255.255.0(rw,sync)
 [root@server /]# service portmap restart
 [root@server /]# service nfs restart
 [root@server /]# showmount -e
 Export list for server.example.com:
 /rhome
 192.168.137.0/255.255.255.0
 

即NIS+NFS服务器已经做好。
 Client 端配置:
 1:NIS client
 要安装NIS的软件包有以下:
 ypbind-1.19-8.el5
 yp-tools-2.9-0.1
 
[root@station100 /]# vim /etc/resolv.conf
search example.com
 nameserver 192.168.137.254
 [root@station100 /]# system-config-authentication

 

[root@station100 /]# service ypbind restart
 关闭 NIS 服务:
 [确定]
 关联到 NIS 域:
 [确定]
 监听 NIS 域服务器。.
 
[root@station100 /]# ypcat passwd
 nisuser01:!!:502:503::/rhome/nisuser/nisuser01:/bin/bash
 nagios:$1$QOpN2J5B$6m0JEPGcXGCb7KDGMy/UA/:500:500::/home/nagios:/bin/bash
 test:!!:501:502::/home/nisuser/test:/bin/bash
 nisuser03:!!:504:505::/rhome/nisuser03:/bin/bash
 nisuser02:!!:503:504::/rhome/nisuser2:/bin/bash
 
2:autofs
 #vim /etc/auto.master
 /rhome
 /etc/auto.nis
 --timeout 60
 
----添加一行
 #cp /etc/auto.misc /etc/auto.nisuser
 #vim /etc/auto.nis
 #cd XXXX
 *
 -rw,soft,intr
 server.example.com:/rhome/&
 
#service autofs restart
 #service portmap restart
 
[root@station100 /]# su - nisuser02
 [nisuser02@station100 ~]$ pwd
 /rhome/nisuser2
 [nisuser02@station100 ~]$ id
 uid=503(nisuser02) gid=504(nisuser02) groups=504(nisuser02)
 
[root@station100 /]# mount -l
 /dev/sda1 on / type ext3 (rw) [/]
 proc on /proc type proc (rw)
 sysfs on /sys type sysfs (rw)
 devpts on /dev/pts type devpts (rw,gid=5,mode=620)
 tmpfs on /dev/shm type tmpfs (rw)
 none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
 none on /proc/fs/vmblock/mountPoint type vmblock (rw)
 sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
 nfsd on /proc/fs/nfsd type nfsd (rw)
 /dev/hdc on /media/RHEL_5.4 x86_64 DVD type iso9660 (ro,noexec,nosuid,nodev,uid=0) [RHEL/5.4 x86_64 DVD]
 192.168.137.254:/rhome/nisuser2 on /rhome/nisuser2 type nfs (rw,soft,intr,addr=192.168.137.254)
 

[root@station100 /]# id
 uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
 [root@station100 /]# cd /rhome/nisuser2/
 bash: cd: /rhome/nisuser2/: 权限不够
 [root@station100 /]# ----------客户端本地root无法访问nis用户目录
 
设定每个用户的home目录大小为500M,当用户使用空间达到400M时将提出警告,但能继续读写,当空间使用达到500M时,将不能继续写入数据。
 为了方便测试,我将用户空间上线定为200K,超过200K不能继续写入,超过100K提出警告
 [root@server /]# cat /etc/fstab
LABEL=/
 /
 ext3
 defaults
 1 1
 tmpfs
 /dev/shm
 tmpfs
 defaults
 0 0
 devpts
 /dev/pts
 devpts
 gid=5,mode=620
 0 0
 sysfs
 /sys
 sysfs
 defaults
 0 0
 proc
 /proc
 proc
 defaults
 0 0
 LABEL=SWAP-sda2
 swap
 swap
 defaults
 0 0
 /dev/sdb1
 /rhome
 ext3
 defaults,usrquota,grpquota 0 0
 
配置quota:
 [root@server ~]# umount /dev/sdb1
 [root@server ~]# mount -a
 [root@server ~]# mount
 /dev/sda1 on / type ext3 (rw)
 proc on /proc type proc (rw)
 sysfs on /sys type sysfs (rw)
 devpts on /dev/pts type devpts (rw,gid=5,mode=620)
 tmpfs on /dev/shm type tmpfs (rw)
 none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
 none on /proc/fs/vmblock/mountPoint type vmblock (rw)
 sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
 nfsd on /proc/fs/nfsd type nfsd (rw)
 /dev/hdc on /media/DPExps500 type iso9660 (ro,noexec,nosuid,nodev,uid=0)
 /dev/sdb1 on /rhome type ext3 (rw,usrquota,grpquota)
 
[root@server ~]# quotacheck -mcugf /rhome/
 [root@server ~]# quotaon /rhome/
 [root@server ~]# edquota -u nisuser01
 [root@server ~]# setquota -u nisuser01 100 200 0 0 /rhome/
 [root@server ~]# repquota -a
 *** Report for user quotas on device /dev/sdb1
 Block grace time: 7days; Inode grace time: 7days
 
Block limits
 File limits
 User
 used
 soft
 hard
 grace
 used
 soft
 hard
 grace
 ----------------------------------------------------------------------
 root
 --
 5652
 0
 0
 3
 0
 0
 
nisuser01 --
 9
 100
 200
 9
 0
 0
 
测试:
 [root@server nisuser01]# su - nisuser01
 [nisuser01@server ~]$ pwd
 [nisuser01@server ~]$ dd if=/dev/zero of=/rhome/nisuser01/testfile bs=1024 count=100
 sdb1: warning, user block quota exceeded.
 -----空间使用超过100K提出警告,但能正常写入
 100+0 records in
 100+0 records out
 102400 bytes (102 kB) copied, 0.001188 seconds, 86.2 MB/s
 
[root@server ~]# repquota -a
 *** Report for user quotas on device /dev/sdb1
 Block grace time: 7days; Inode grace time: 7days
 
Block limits
 File limits
 User
 used
 soft
 hard
 grace
 used
 soft
 hard
 grace
 ----------------------------------------------------------------------
 root
 --
 5652
 0
 0
 3
 0
 0
 
nisuser01 +-
 110
 100
 200
 6days
 10
 0
 0
 

[nisuser01@server ~]$ dd if=/dev/zero of=/rhome/nisuser01/testfile bs=1024 count=200
 sdb1: warning, user block quota exceeded.
 sdb1: write failed, user block limit reached.
 dd: 写入 “/rhome/nisuser01/testfile”: ------超出磁盘限额
 -----超出限制,写入失败
 191+0 records in
 190+0 records out
 194560 bytes (195 kB) copied, 0.003576 seconds, 54.4 MB/s
 
[root@server ~]# repquota -a
 *** Report for user quotas on device /dev/sdb1
 Block grace time: 7days; Inode grace time: 7days
 
Block limits
 File limits
 User
 used
 soft
 hard
 grace
 used
 soft
 hard
 grace
 ----------------------------------------------------------------------
 root
 --
 5652
 0
 0
 3
 0
 0
 
nisuser01 +-
 200
 100
 200
 6days
 10
 0
 0
 

 

本文出自 “广园A班-林凡龙” 博客,谢绝转载!

你可能感兴趣的:(NIS+AUTOFOFS+NFS)