二、安装PHP 5.2.14(FastCGI模式)【LNMP安装 】

1、编译安装PHP 5.2.14所需的支持库:
注意:下面的libiconv比如装在/usr/local下因为php在make会需要
tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../


  2、编译安装MySQL 5.5.3-m3
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.5.3-m3.tar.gz
cd mysql-5.5.3-m3/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=partition,innobase,myisammrg
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cd ../


  附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下几步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。

  ①、创建MySQL数据库存放目录
mkdir -p /data0/mysql/3306/data/
mkdir -p /data0/mysql/3306/binlog/
mkdir -p /data0/mysql/3306/relaylog/
chown -R mysql:mysql /data0/mysql/


  ②、以mysql用户帐号的身份建立数据表:
/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/data0/mysql/3306/data --user=mysql


  ③、创建my.cnf配置文件:
vi /data0/mysql/3306/my.cnf

  输入以下内容:
引用
[client]
character-set-server = utf8
port    = 3306
socket  = /tmp/mysql.sock

[mysqld]
character-set-server = utf8
replicate-ignore-db = mysql
replicate-ignore-db = test
replicate-ignore-db = information_schema
user    = mysql
port    = 3306
socket  = /tmp/mysql.sock
basedir = /usr/local/webserver/mysql
datadir = /data0/mysql/3306/data
log-error = /data0/mysql/3306/mysql_error.log
pid-file = /data0/mysql/3306/mysql.pid
open_files_limit    = 10240
back_log = 600
max_connections = 5000
max_connect_errors = 6000
table_cache = 614
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 1M
join_buffer_size = 1M
thread_cache_size = 300
#thread_concurrency = 8
query_cache_size = 512M
query_cache_limit = 2M
query_cache_min_res_unit = 2k
default-storage-engine = MyISAM
thread_stack = 192K
transaction_isolation = READ-COMMITTED
tmp_table_size = 246M
max_heap_table_size = 246M
long_query_time = 3
log-slave-updates
log-bin = /data0/mysql/3306/binlog/binlog
binlog_cache_size = 4M
binlog_format = MIXED
max_binlog_cache_size = 8M
max_binlog_size = 1G
relay-log-index = /data0/mysql/3306/relaylog/relaylog
relay-log-info-file = /data0/mysql/3306/relaylog/relaylog
relay-log = /data0/mysql/3306/relaylog/relaylog
expire_logs_days = 30
key_buffer_size = 256M
read_buffer_size = 1M
read_rnd_buffer_size = 16M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
myisam_recover

interactive_timeout = 120
wait_timeout = 120

skip-name-resolve
#master-connect-retry = 10
slave-skip-errors = 1032,1062,126,1114,1146,1048,1396

#master-host     =   192.168.1.2
#master-user     =   username
#master-password =   password
#master-port     =  3306

server-id = 1

innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 512M
innodb_data_file_path = ibdata1:256M:autoextend
innodb_file_io_threads = 4
innodb_thread_concurrency = 8
innodb_flush_log_at_trx_commit = 2
innodb_log_buffer_size = 16M
innodb_log_file_size = 128M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
innodb_file_per_table = 0

#log-slow-queries = /data0/mysql/3306/slow.log
#long_query_time = 10

[mysqldump]
quick
max_allowed_packet = 32M


  ④、创建管理MySQL数据库的shell脚本:
vi /data0/mysql/3306/mysql

  输入以下内容(这里的用户名admin和密码12345678接下来的步骤会创建):
#!/bin/sh

mysql_port=3306
mysql_username="admin"
mysql_password="12345678"

function_start_mysql()
{
   printf "Starting MySQL...\n"
   /bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/data0/mysql/${mysql_port}/my.cnf 2>&1 > /dev/null &
}

function_stop_mysql()
{
   printf "Stoping MySQL...\n"
   /usr/local/webserver/mysql/bin/mysqladmin -u ${mysql_username} -p${mysql_password} -S /tmp/mysql.sock shutdown
}

function_restart_mysql()
{
   printf "Restarting MySQL...\n"
   function_stop_mysql
   sleep 5
   function_start_mysql
}

function_kill_mysql()
{
   kill -9 $(ps -ef | grep 'bin/mysqld_safe' | grep ${mysql_port} | awk '{printf $2}')
   kill -9 $(ps -ef | grep 'libexec/mysqld' | grep ${mysql_port} | awk '{printf $2}')
}

if [ "$1" = "start" ]; then
   function_start_mysql
elif [ "$1" = "stop" ]; then
   function_stop_mysql
elif [ "$1" = "restart" ]; then
function_restart_mysql
elif [ "$1" = "kill" ]; then
function_kill_mysql
else
   printf "Usage: /data0/mysql/${mysql_port}/mysql {start|stop|restart|kill}\n"
fi
注意:如果上面报错语法错误
注释掉function_kill_mysql方法和调用
  ⑤、赋予shell脚本可执行权限:
chmod +x /data0/mysql/3306/mysql


  ⑥、启动MySQL:
/data0/mysql/3306/mysql start


  ⑦、通过命令行登录管理MySQL服务器(提示输入密码时直接回车):
/usr/local/webserver/mysql/bin/mysql -u root -p -S /tmp/mysql.sock


  ⑧、输入以下SQL语句,创建一个具有root权限的用户(admin)和密码(12345678):
GRANT ALL PRIVILEGES ON *.* TO 'admin'@'localhost' IDENTIFIED BY '12345678';
GRANT ALL PRIVILEGES ON *.* TO 'admin'@'127.0.0.1' IDENTIFIED BY '12345678';


  ⑨、(可选)停止MySQL:
/data0/mysql/3306/mysql stop


  3、编译安装PHP(FastCGI模式)
tar zxvf php-5.2.14.tar.gz
gzip -cd php-5.2.14-fpm-0.5.14.diff.gz | patch -d php-5.2.14 -p1
cd php-5.2.14/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
注意如果配置php报错,且机器是64位系统:

1.如果提示"configure: error: libjpeg.(a|so) not found"错误

所以这里我们需要复制一份libjpeg.so到/usr/lib/目录里才可以.再次执行./configure命令即可.

cp -frp /usr/lib64/libjpeg.* /usr/lib/

2.注意过程中还会提示" Configure: error: libpng.(also) not found."错误,解决办法和上面的一样.

cp -frp /usr/lib64/libpng* /usr/lib/

3.如果提示"configure: error: Cannot find ldap libraries in /usr/lib."的话.

cp -frp /usr/lib64/libldap* /usr/lib/

4.如果提示:/usr/bin/ld: cannot find -liconv

需要查看是否安装了libiconv 和是否在/usr/local下。且/usr/lib 下存在libiconv.so文件,如果不存在需要查找libiconv.so到/usr/lib下。

说明:

通过上面的搜索其实就知道一些原因了,configure一般的搜索编译路径为/usr/lib/下,因为php默认就在/usr/lib/下找相关库文件,而x64机器上是在:/usr/lib64.这时你就可以直接把需要的库文件从/usr/lib64中拷贝到/usr/lib/中去就可以了.

上面的make之后要运行make install,而且如果是64位操作系统 则可能报错。
如果报错:缺少libicon.so.2 那么只需要更改/etc/ld.so.conf 增加一行: /usr/local/lib
然后运行:/sbin/sdconfig
如果继续报错:/usr/lib64/mysqlclient.so is empty 那么则需要删除这个空文件,并复制/usr/local/webserver/mysql/lib/mysqlclient.so文件过来
继续执行/sbin/sdconfig

  4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.6.1.tar.bz2
cd eaccelerator-0.9.6.1/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../


  5、修改php.ini文件
手工修改: 查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
  修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
  并在此行后增加以下几行,然后保存:
  extension = "memcache.so"
  extension = "pdo_mysql.so"
  extension = "imagick.so"

  再查找output_buffering = Off
  修改为output_buffering = On

  再查找; cgi.fix_pathinfo=0
  修改为cgi.fix_pathinfo=0,防止Nginx文件类型错误解析漏洞。

自动修改: 若嫌手工修改麻烦,可执行以下shell命令,自动完成对php.ini文件的修改:
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini
sed -i "s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g" /usr/local/webserver/php/etc/php.ini
sed -i "s#; cgi.fix_pathinfo=0#cgi.fix_pathinfo=0#g" /usr/local/webserver/php/etc/php.ini


  6、配置eAccelerator加速PHP:
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini

  按shift+g键跳到配置文件的最末尾,加上以下配置信息:
引用
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"



  7、创建www用户和组,以及供blog.s135.com和 www.s135.com 两个虚拟主机使用的目录:
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www


  8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):
  在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf

  输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的<value name="display_errors">0</value>改为<value name="display_errors">1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页):
<?xml version="1.0" ?>
<configuration>

 All relative paths in this config are relative to php's install prefix

 <section name="global_options">

   Pid file
   <value name="pid_file">/usr/local/webserver/php/logs/php-fpm.pid</value>

   Error log file
   <value name="error_log">/usr/local/webserver/php/logs/php-fpm.log</value>

   Log level
   <value name="log_level">notice</value>

   When this amount of php processes exited with SIGSEGV or SIGBUS ...
   <value name="emergency_restart_threshold">10</value>

   ... in a less than this interval of time, a graceful restart will be initiated.
   Useful to work around accidental curruptions in accelerator's shared memory.
   <value name="emergency_restart_interval">1m</value>

   Time limit on waiting child's reaction on signals from master
   <value name="process_control_timeout">5s</value>

   Set to 'no' to debug fpm
   <value name="daemonize">yes</value>

 </section>

 <workers>

   <section name="pool">

     Name of pool. Used in logs and stats.
     <value name="name">default</value>

     Address to accept fastcgi requests on.
     Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
     <value name="listen_address">127.0.0.1:9000</value>

     <value name="listen_options">

       Set listen(2) backlog
       <value name="backlog">-1</value>

       Set permissions for unix socket, if one used.
       In Linux read/write permissions must be set in order to allow connections from web server.
       Many BSD-derrived systems allow connections regardless of permissions.
       <value name="owner"></value>
       <value name="group"></value>
       <value name="mode">0666</value>
     </value>

     Additional php.ini defines, specific to this pool of workers.
     <value name="php_defines">
       <value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
       <value name="display_errors">0</value>
     </value>

     Unix user of processes
     <value name="user">www</value>

     Unix group of processes
     <value name="group">www</value>

     Process manager settings
     <value name="pm">

       Sets style of controling worker process count.
       Valid values are 'static' and 'apache-like'
       <value name="style">static</value>

       Sets the limit on the number of simultaneous requests that will be served.
       Equivalent to Apache MaxClients directive.
       Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
       Used with any pm_style.
       <value name="max_children">128</value>

       Settings group for 'apache-like' pm style
       <value name="apache_like">

         Sets the number of server processes created on startup.
         Used only when 'apache-like' pm_style is selected
         <value name="StartServers">20</value>

         Sets the desired minimum number of idle server processes.
         Used only when 'apache-like' pm_style is selected
         <value name="MinSpareServers">5</value>

         Sets the desired maximum number of idle server processes.
         Used only when 'apache-like' pm_style is selected
         <value name="MaxSpareServers">35</value>

       </value>

     </value>

     The timeout (in seconds) for serving a single request after which the worker process will be terminated
     Should be used when 'max_execution_time' ini option does not stop script execution for some reason
     '0s' means 'off'
     <value name="request_terminate_timeout">0s</value>

     The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
     '0s' means 'off'
     <value name="request_slowlog_timeout">0s</value>

     The log file for slow requests
     <value name="slowlog">logs/slow.log</value>

     Set open file desc rlimit
     <value name="rlimit_files">65535</value>

     Set max core size rlimit
     <value name="rlimit_core">0</value>

     Chroot to this directory at the start, absolute path
     <value name="chroot"></value>

     Chdir to this directory at the start, absolute path
     <value name="chdir"></value>

     Redirect workers' stdout and stderr into main error log.
     If not set, they will be redirected to /dev/null, according to FastCGI specs
     <value name="catch_workers_output">yes</value>

     How much requests each process should execute before respawn.
     Useful to work around memory leaks in 3rd party libraries.
     For endless request processing please specify 0
     Equivalent to PHP_FCGI_MAX_REQUESTS
     <value name="max_requests">1024</value>

     Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
     Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
     Makes sense only with AF_INET listening socket.
     <value name="allowed_clients">127.0.0.1</value>

     Pass environment variables like LD_LIBRARY_PATH
     All $VARIABLEs are taken from current environment
     <value name="environment">
       <value name="HOSTNAME">$HOSTNAME</value>
       <value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
       <value name="TMP">/tmp</value>
       <value name="TMPDIR">/tmp</value>
       <value name="TEMP">/tmp</value>
       <value name="OSTYPE">$OSTYPE</value>
       <value name="MACHTYPE">$MACHTYPE</value>
       <value name="MALLOC_CHECK_">2</value>
     </value>

   </section>

 </workers>

</configuration>
  9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为128(如果服务器内存小于3GB,可以只开启64个进程),用户为www:
ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start

  注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload。


你可能感兴趣的:(安装php,5.2.14)