配置802.1X验证

配置802.1X验证

Server IP address 10.1.2.1/24 初始配置 Router： Conf t Int e 0 Ip ad 10.1.1.1 255.255.255.0 No shut     在 Switch 上配置 IEEE 802.1X Conf t Aaa new-model                                                                            /启用AAA Aaa authentication dot1x default group radius                            /在AAA下启用DOT1X验证方法 Dot1x system-auth-control Radius-server host 10.1.2.1                                                         / 配置RADIUS服务器 Int f 0/1 Switchport mode access Dot1x port-control auto Dot1x guess-vlan 2                                                                       /配置GUEST VLAN Dot1x auth-fail vlan 2                                                                  /配置受限制的VLAN aaa accounting dot1x  default start-stop group radius                 /配置802。1X统计 aaa accounting system default start-stop group radius               配置系统统计并当交换机重启时 产生系统统计重启事件通知 end