netapp

 

在机头中安装阵列操作系统
1,在笔记本或网络中的其它Windows终端设备上,通过运行窗口来远程打开阵列的C$目录,如下图所示;
 
 
2,进入etc目录,在此目录下创建一个software目录;
3,将操作系统安装软件包703_setup_e复制到此目录下;
4,通过超级终端登录到机头上,使用software命令进行安装,过程如下:
headb> software list
703_setup_e
headb> software install 703_setup_e
software: installing software, this could take a few minutes...
software: installation completed.
Please type download to load the new software and reboot subsequently for changes to take effect.
headb> Mon Mar 20 09:36:55 GMT [rc:info]: software: installation completed.
提示软件安装完成,需要进一步输入download命令来下载新的系统,并且要重新启动机头使系统生效。
 
5,输入download命令;
headb> download
download: You can cancel this operation by hitting Ctrl-C in the next 6 seconds.
download: Depending on system load, it may take many minutes
download: to complete this operation. Until it finishes, you will
download: not be able to use the console.
Mon Mar 20 09:37:28 GMT [download.request:notice]: Operator requested download initiated
 
download: Downloading boot device
Version 1 ELF86 kernel detected.
..............................
download: Downloading boot device (Service Area)
.......
headb> Mon Mar 20 09:39:23 GMT [download.requestDone:notice]: Operator requested download completed
提示download操作执行完毕;
 
6,使用cf命令来检查Cluster功能的当前状态;
headb> cf
Cluster must be licensed and the system rebooted before using this command.
 
7,重新启动机头;
headb> reboot
CIFS local server is shutting down...
CIFS local server has shut down...
Mon Mar 20 09:40:32 GMT [kern.shutdown:notice]: System shut down because : "reboot".
Mon Mar 20 09:40:34 GMT [pvif.allLinksDown:CRITICAL]: vif1: all links down
 
8,等重启完毕出现登陆提示后,建议重新设置root用户的密码,默认无密码;
Data ONTAP (headb.)
login: 
 
Data ONTAP (headb.)
login: root
Password: 
headb> Mon Mar 20 09:44:08 GMT [console_login_mgr:info]: root logged in from console
 
headb> passwd
Login: root
New password:
Retype new password:
headb> Mon Mar 20 09:44:46 GMT [headb: passwd.changed:info]: passwd for user 'root' changed.
 
9,至此阵列的操作系统安装完毕,可以正常使用了。

本文出自 “学习人生” 博客,谢绝转载!

你可能感兴趣的:(职场,休闲,netapp安装阵列操作系统)