LINUX5配置smokeping

转载自http://hi.baidu.com/yifan1018/blog/item/e1e1c92a7ec61295023bf6a9.html

【实际需求】

做为网站公司一般都会要求我们 IT 部提供全国各地 IDC 网络速度如何？质量？稳定性等等？
一般 ISP 或者代理公司会给出测试服务器供我们测试该 IDC 的网络情况如何？
比如 windows 服务器中有雷傲测试工具等等、就是通过在高峰时间段 ping 各地区的信息港或者骨干网络的 IP 地址；最后分析统计该时间段内的 ping 值数据的平均值和丢包率等；
===================================================================================SmokePing

【Smokeping 简介】

是 rrdtool 的作者 Tobi Oetiker 的作品，所以它在图形显示方面有很大优势，也是一个很有特点的 opensource 工具：
多种探测方式，包括 fping、echoping、dig、curl 等；
易用可扩展的插件；
master/slave 的工作方式，可以在多个节点收集同一个监测点的数据；
很有特色的 alert 设置，不只是简单的设置一个阀值。
===================================================================================
【系统配置 RHEL-5.3】

关闭 防火墙
# service iptables stop
Flushing firewall rules:                                 [ OK ]
Setting chains to policy ACCEPT: filter                   [ OK ]
Unloading iptables modules:                                  [ OK ]

关闭 selinux
# system-config-selinux
或
# setenforce 0
或
# vi /etc/sysconfig/selinux
将 SELINUX= enforcing
改成 SELINUX= disabled
重启后生效
===================================================================================
【安装相关软件】
smokeping 是一个用 perl 写的程序，所以不需要安装。但是他需要使用一些工具以及 perl 的 module，还有 rrdtool、fping、echoping 等，这些都需要预先安装好。smokeping 启动的时候，也会自己去检查需要用到的程序是否能找到。

我已经配置好了 yum ：

# yum install gcc
# yum install freetype-devel
# yum install zlib-devel
# yum install libpng-devel
# yum install libart_lgpl-devel
# yum install httpd-devel
# yum install apr-util-devel
# yum install apr-devel
# yum install perl*

# yum install gcc freetype-devel zlib-devel libpng-devel libart_lgpl-devel httpd-devel apr-util-devel apr-devel freetype libart_lgpl libpng zlib perl*

除了以上的 rpm 包，还需手动安装以下的包。
【rrdtool】【cgilib】【fping-2.4b2_to】【echoping】【CGI-SpeedyCGI-2.22】【smokeping】
===================================================================================
【rrdtool】

rrdtool 依赖以下程序
# yum install freetype
# yum install libart_lgpl
# yum install libpng
# yum install zlib
# yum install freetype libart_lgpl libpng zlib

# wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.3.6.tar.gz
# tar zxvf rrdtool-1.3.6.tar.gz
# cd rrdtool-1.3.6
# ./configure --disable-tcl

----------------------------------------------------------------
Config is DONE!

With MMAP IO: yes
Build rrd_getopt: no
Static programs: no
Perl Modules: perl_piped perl_shared
Perl Binary: /usr/bin/perl
Perl Version: 5.8.8
Perl Options: PREFIX=$(DESTDIR)/usr/local/rrdtool-1.3.6 LIB=$(DESTDIR)/usr/local/rrdtool-1.3.6/lib/perl/5.8.8
Ruby Modules:
Ruby Binary: no
Ruby Options: sitedir=$(DESTDIR)/usr/local/rrdtool-1.3.6/lib/ruby
Build Tcl Bindings: no
Build Python Bindings: yes
Build rrdcgi: yes
Build librrd MT: yes
Link with libintl: yes

Libraries: -lxml2 -lcairo -lcairo -lcairo -lm -lcairo -lpng12   -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0

Type 'make' to compile the software and use 'make install' to
install everything to: /usr/local/rrdtool-1.3.6.

... that wishlist is NO JOKE. If you find RRDtool useful
make me happy. Go to http://tobi.oetiker.ch/wish and
place an order.

-- Tobi Oetiker <[email protected]>
----------------------------------------------------------------

# make
# make install
# whereis rrdtool
   rrdtool: /usr/local/rrdtool

完成后执行cd ..退回安装包的目录
------------------------------------------------------------------------------------------------------------------------------------
【cgilib】
# wget http://down1.chinaunix.net/distfiles/cgilib-0.5.tar.gz
# tar zxvf cgilib-0.5.tar.gz
# cd cgilib-0.5
# make
# cp libcgi.a /usr/local/lib
# cp cgi.h /usr/include 

cglib是一个强大的,高性能,高质量的Code生成类库。它可以在运行期扩展Java类与实现Java接口。
cglib封装了asm，可以在运行期动态生成新的class。cglib用于AOP，jdk中的proxy必须基于接口，cglib却没有这个限制。cglib项目主页 | http://cglib.sourceforge.net/
------------------------------------------------------------------------------------------------------------------------------------
【fping-2.4b2_to】
# wget http://fping.sourceforge.net/download/fping.tar.gz
# tar zxvf fping.tar.gz
# cd fping-2.4b2_to
# ./configure
# make
# make check
# make install
# whereis fping
fping: /usr/local/sbin/fping
------------------------------------------------------------------------------------------------------------------------------------
【echoping】
# wget http://jaist.dl.sourceforge.net/project/echoping/echoping/6.0.0/echoping-6.0.0.tar.gz
# tar zxvf echoping-6.0.0.tar.gz
# cd echoping-6.0.0
# ./configure
# make
# make test
遇到测试不成功等信息就 ctrl+c 回到命令行；
# make install
# whereis echoping
echoping: /usr/local/bin/echoping /usr/local/lib/echoping
------------------------------------------------------------------------------------------------------------------------------------
【CGI-SpeedyCGI-2.22】
# wget http://daemoninc.com/SpeedyCGI/CGI-SpeedyCGI-2.22.tar.gz
# tar zxvf CGI-SpeedyCGI-2.22.tar.gz
# cd CGI-SpeedyCGI-2.22
# perl Makefile.PL

Optional mod_speedycgi support.

Mod_speedycgi increases performance under Apache by avoiding the fork/exec
overhead associated with each request under normal SpeedyCGI. However, it
requires a working copy of "apxs" in your path, Apache with mod_so
support, and additional Apache configuration.

Compile mod_speedycgi (default no)? n
遇到问题选择默认选项（ no）

# ls /etc/httpd/modules/
libphp5.so          mod_cgid.so        mod_include.so        mod_proxy.so
……
mod_cern_meta.so    mod_imap.so        mod_proxy_http.so

这个目录下没有 mod_speedycgi.so，现在需要去下载安装 mod_speedycgi.so

搜到了一个源
# wget ftp://195.220.108.108/linux/epel/5/i386/mod_speedycgi-2.22-4.el5.i386.rpm

# rpm -ivh mod_speedycgi-2.22-4.el5.i386.rpm
warning: mod_speedycgi-2.22-4.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 217521f6
error: Failed dependencies:
perl-CGI-SpeedyCGI = 2.22-4.el5 is needed by mod_speedycgi-2.22-4.el5.i386

# wget ftp://fr.rpmfind.net/linux/EPEL/5Server/i386/perl-CGI-SpeedyCGI-2.22-4.el5.i386.rpm
# rpm -ivh --force perl-CGI-SpeedyCGI-2.22-4.el5.i386.rpm
# rpm -ivh mod_speedycgi-2.22-4.el5.i386.rpm
# perl Makefile.PL

# make
# make test
# make install

完成后执行 cd ..退回安装包的目录
===================================================================================
三、配置 【smokeping】

① 下载、解压文件
# wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.3.6.tar.gz
# tar zxvf smokeping-2.3.6.tar.gz
# mv smokeping-2.3.6 / smokeping
# cd / smokeping /smokeping-2.3.6
------------------------------------------------------------------------------------------------------------------------------------
② 生成文件

bin/ 下的 smokeping.dist
# cp smokeping.dist smokeping

etc/ 下的 basepage.html.dist，config.dist，smokemail.dist
# cp basepage.html.dist basepage.html
# cp config.dist config
# cp smokemail.dist smokemail
# chmod 600 smokeping_secrets.dist

htdocs/smokeping.cgi.dist
# cp smokeping.cgi.dist smokeping.cgi

/etc/ 下的 config-echoping.dist 可以先不去掉.dist；
------------------------------------------------------------------------------------------------------------------------------------
③ 按下面的步骤改参数：

配置 bin/smokeping
# vi /smokeping/smokeping-2.3.6/bin/ smokeping
主程序，运行在后台。
在这个文件里面我们需要修改前面两个 lib 和后面 config 文件的 path。
两个 lib 分别是 smokeping 的 lib 和 rrdtool 的 lib 。

我的 smokeping 安装在 /usr/local/ 目录中，所以我的设置是：

将以下几行替换为已经安装的相关软件的路径（将 橙黄色改为 浅黄色）：

#!/usr/sepp/bin/perl-5.8.4 -w
#!/usr/bin/perl -w

use lib qw(/usr/pack/rrdtool-1.2.23-mo/lib/perl);
use lib qw( /usr/local/rrdtool-1.3.6/lib/perl );

use lib qw(lib);
use lib qw(/smokeping/smokeping-2.3.6/lib);

use Smokeping 2.003006;

Smokeping::main("etc/config.dist");
Smokeping::main("/smokeping/smokeping-2.3.6/etc/config");


配置 htdocs/smokeping.cgi
# vi / smokeping /smokeping-2.3.6/htdocs/smokeping.cgi
这个文件显示页面、图像和作为 slave 传输数据的接口，设置方法与"bin/smokeping"类似。
但是第一行的 speedy 的路径可能需要修改，否则浏览器中只会看到一个白色的页面。
将以下几行替换为已经安装的相关软件的路径（将 橙黄色改为 浅黄色）：
#!/usr/sepp/bin/speedy -w
# -*-perl-*-
#!/usr/bin/speedy -w
# -*-perl-*-

# use lib qw(/usr/pack/rrdtool-1.0.33-to/lib/perl);
use lib qw(/usr/local/rrdtool-1.3.6/lib/perl/);

# use lib qw(/home/oetiker/data/projects/AADJ-smokeping/dist/lib);
use lib qw( / smokeping /smokeping-2.3.6/ lib);

use Smokeping 2.003006;

Smokeping::cgi("/home/oetiker/data/projects/AADJ-smokeping/dist/etc/config");
Smokeping::cgi("/ smokeping /smokeping-2.3.6/etc/config");


配置 htdocs/cropper/*
用来作页面图像放大缩小的工具。


配置 etc/basepage.html
显示页面的主框架。里面之需要配置"htdocs/cropper/"的位置即可。


配置 etc/config
# vi /smokeping/smokeping-2.3.6/etc/config
（config 默认是只读的，需要修改属性）
将以下几行替换为已经安装的相关软件的路径（将 橙黄色改为 浅黄色）：

*** General ***
owner    = Peter Random
owner = qu6zhi.test （输入您的名字，显示在网页上)

contact = [email protected]
contact = user@domain （输入您的邮件，显示在网页上）

imgcache = /home/oetiker/public_html/smokeping-ms/cache
imgcache = /smokeping/smokeping-2.3.6/htdocs/cache

imgurl   = cache
imgurl   = cache

datadir = /tmp/smokeping-ms/data
datadir = /smokeping/smokeping-2.3.6/var

piddir = /tmp/smokeping-ms/var
piddir = /smokeping/smokeping-2.3.6/var

cgiurl   = http://some.url/smokeping.cgi
cgiurl   = http://IP/htdocs/smokeping.cgi

smokemail = /home/oetiker/checkouts/smokeping/trunk/software/etc/smokemail.dist
smokemail = /smokeping/smokeping-2.3.6/etc/smokemail

tmail = /home/oetiker/checkouts/smokeping/trunk/software/etc/tmail.dist
tmail = /smokeping /smokeping-2.3.6 /etc/tmail.dist

*** Presentation ***

template = /home/oetiker/checkouts/smokeping/trunk/software/etc/basepage.html.dist
template = /smokeping/smokeping-2.3.6/etc/basepage.html

*** Database ***

step     = 30 // web 页面的刷新时间 这里要修改，不然30秒发出1000个包，远端的机器还以为是黑客攻击；修改为100秒 发出20个包  ；
pings    = 1000

*** Alerts ***
to = [email protected]
to = user@domain （要收到报警邮件的 e-mail address）

from = [email protected]
from = smokealert@localhost （本机要发送的账号）


*** Targets ***
编辑要做监控的主机
编辑方式采阶层式, 用 + （加号） 做阶层功能

probe = FPing
normal 是100bit
default 是 1024bit

+ Test

menu = Top
title = Network Latency Grapher（描述）

++ stddev（++ 第二层分类）
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation（menu = 第二层）
format = Standard Deviation %f

title = 第二层的描述

+++ Switch001
menu = 第三层里的配置 （可以继续分层）
title = 第三层里的设备的名称
host = 192.168.1.254 （IP 或 domain name 都可以）
+++ Switch002
menu = 第三层里的设备 （可以继续分层）
title = 第三层里的设备的名称
host = 192.168.2.254 （IP 或 domain name 都可以）
menu = Multihost
title = James and James as seen from Boomer
host = /World/第二层分类/Switch001 /World/第二层分类/Switch002 （将多个图合并到一个图中）

*** Targets ***
probe = FPing

menu = Top
title = Network Latency Grapher
remark = Welcome to this SmokePing website.

+ mysite1
menu = Site 1
title = Hosts in Site 1

++ myhost1
host = myhost1.mysite1.example
++ myhost2
host = myhost2.mysite1.example

+ mysite2
menu = Site 2
title = Hosts in Site 2

++ myhost3
host = myhost3.mysite2.example
++ myhost4
host = myhost4.mysite2.example

注意：设备名字当中不能出现“ .”。

*** Probes ***

+ FPing
binary = /usr/sbin/fping
binary = /smokeping/fping-2.4b2_to/fping


*** Slaves ***
secrets=/smokeping/smokeping-2.3.6/etc/smokeping_secrets.dist
#+boomer
#display_name=boomer
#color=0000ff
#+slave2

显示中文
*** Presentation ***
中，加入：

charset = gb2312
不过 rrdtool 图像中还是显示不了中文。

最后：
# mkdir /smokeping/smokeping-2.3.6/htdocs/cache
# mkdir /smokeping/smokeping-2.3.6/var

===================================================================================

# vi /smokeping/smokeping-2.3.6/etc/config

确认下图的配置

imgcache = /home/oetiker/public_html/smokeping-ms/cache
imgcache = /smokeping/smokeping-2.3.6/htdocs/cache

imgurl   = cache
imgurl   = cache

datadir = /tmp/smokeping-ms/data
datadir = /smokeping/smokeping-2.3.6/var

piddir = /tmp/smokeping-ms/var
piddir = /smokeping/smokeping-2.3.6/var

查看缓存 /smokeping/smokeping-2.3.6/htdocs/cache/HP-IDC/ 没有发现 png 文件，这样不正常。

给 smokeping 目录 apache 完全权限，不然 rrdtool 会画不出图：
# chown -R apache:apache /smokeping/smokeping-2.3.6/

imgurl (mandatory setting)

Either an absolute URL to the imgcache directory or one relative to the directory where you keep the SmokePing cgi.

# vi /smokeping/smokeping-2.3.6/etc/config

……

#imgurl = /smokeping/smokeping-2.3.6/htdocs/cache

imgurl = cache
……

===================================================================================
四、web 页面认证的配置

# wget http://ftp.cuhk.edu.hk/pub/packages/perl/CPAN/authors/id/H/HO/HORROCKS/CGI-SpeedyCGI-1.8.2.tar.gz

① 把运营设备 /var/www/.htaccess 拷贝到新设备的 /var/www 目录下；

② 把运营设备 /smokeping/smokeping-2.3.6/etc/htpasswd.users 拷贝到新设备的 /smokeping/smokeping-2.3.6/etc 目录下；如果考不过来，就在运营设备上 vi htpasswd.users ，同时在新设备上 vi /smokeping/smokeping-2.3.6/etc/htpasswd.users ，然后把运营设备的那个文件里面的内容拷贝到新设备的那个文件里，(noc:bC6fBME.DZLHE)保存推出vi ；

③ 接下来配置 smokeping 的储存图形文件的目录，不然会画不出图：
# mkdir /smokeping/smokeping-2.3.6/.simg
# chown -R apache:apache /smokeping/smokeping-2.3.6/

④ 接下来编辑 apache 的配置文件，让apache能执行 smokeping 的 html 文件：
# vi /etc/httpd/conf/httpd.conf

NameVirtualHost *:80

<VirtualHost *:80>
   DocumentRoot /smokeping/smokeping-2.3.6/htdocs
   ServerName dummy-host.example.com
   ScriptAlias /index.html /smokeping/smokeping-2.3.6/htdocs/smokeping.cgi
</VirtualHost>

把下面这段加到下面几行配置下面
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>

要加的配置是：
<Directory "/smokeping/smokeping-2.3.6/htdocs">
Options FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
Allow from all
</Directory>

<Directory /smokeping/smokeping-2.3.6>
Options FollowSymLinks
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>

⑤ 然后，为了不让 apache 找 mysql 去认证，需要：
# yum install mod_auth_mysql
===================================================================================
六、运行环境

删除进程：
# cd /smokeping/smokeping-2.3.6/etc
# killall smokeping（多执行）
# ps -efH |grep smokeping

启动进程：
# /smokeping/smokeping-2.3.6/bin/smokeping start
# service httpd restart

配置开机自动运行

# vi /etc/rc.d/rc.local

/smokeping/smokeping-2.3.6/bin/smokeping start

打开浏览器，

 

http://x.x.x.x/htdocs/smokeping.cgi

===================================================================================
七、访问权限

①

修改 httpd.conf

#

vi /etc/httpd/conf/httpd.conf

306

<Directory " /smokeping/smokeping-2.3.6/htdocs ">

307

 

308 #

 

309 # Possible values for the Options directive are "None", "All",

 

310 # or any combination of:

 

311 #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

 

312 #

 

313 # Note that "MultiViews" must be named *explicitly* --- "Options All"

 

314 # doesn't give it to you.

 

315 #

 

316 # The Options directive is both complicated and important. Please see

 

317 # http://httpd.apache.org/docs/2.2/mod/core.html#options

 

318 # for more information.

 

319 #

 

320    

Options Indexes FollowSymLinks

321

 

322 #

 

323 # AllowOverride controls what directives may be placed in .htaccess files.

 

324 # It can be "All", "None", or any combination of the keywords:

 

325 #   Options FileInfo AuthConfig Limit

 

326 #

 

327    

AllowOverride AuthConfig

328

 

329 #

 

330 # Controls who can get stuff from this server.

 

331 #

 

332    

Order allow,deny

333    

Allow from all

334

 

335 </Directory>

意思是在 /smokeping/smokeping-2.3.6/htdocs 下不同目录的访问权限由该目录下的 .htaccess 文件来控制，而且不同目录的权限策略可互相覆盖。

② 编辑 .htaccess 文件
# vi /smokeping/smokeping-2.3.6/htdocs/ .htaccess.smoke #访问权限控制文件
AuthUserFile /smokeping/smokeping-2.3.6/htdocs/htpasswd.smoke.user   # 用户密码信息存放文件
AuthType Basic   #认证类型为基本型
AuthName "smokeping" #弹出对话框的说明
require valid-user   #认证方式
保存退出。

③ 建立用户
# /usr/bin/htpasswd �Cc /smokeping/smokeping-2.3.6/htdocs/htpasswd.smoke.user admin # 建立用户 admin
New password: # 输入用户密码
Re-type new password: # 再次输入密码
Adding password for user admin # 添加用户成功信息
可以建立多个用户

④ # chgrp apache htpasswd.smoke.user
    # chmod 640 htpasswd.smoke.user

⑤ 重启 apache，再次访问http://xxx.xxx.xxx.xxx，这时应该出现一个身份认证窗口，你需要输入用户名和密码才能访问这个页面。

如果你也遇到 Apache 还不支持 .htaccess 的情况，使用我上面的这个情况不行的话，那就在 httpd.conf 文件里搜索 LoadModule rewrite_module modules/mod_rewrite.so，如果前面有 # 符号，就去掉。保存，然后重启 Apache 。

===================================================================================
285 vi /etc/bashrc
286 w
320 netstat -anptu
321 ps -A | grep smoke
===================================================================================

参考：

官方：http://oss.oetiker.ch/smokeping/
官方：http://oss.oetiker.ch/smokeping/doc/smokeping_config.en.html
https://confluence.slac.stanford.edu/display/IEPM/Smokeping+Installation
http://blog.sina.com.cn/s/blog_58d6275e01000a5s.html
http://hi.baidu.com/qu6zhi/blog/item/e80633dc3e8926a8cd1166ab.html
http://www.blogjava.net/ruoyoux/articles/257138.html
http://linux.chinaunix.net/bbs/thread-1064864-1-1.html
http://bbs.wglm.net/read.php?tid=98204&uid=12891
http://search.cpan.org/~horrocks/CGI-SpeedyCGI-2.22/
http://search.cpan.org/~horrocks/CGI-SpeedyCGI-2.22/lib/CGI/SpeedyCGI.pm
http://daemoninc.com/SpeedyCGI/
http://search.cpan.org/~horrocks/CGI-SpeedyCGI-2.22/src/SpeedyCGI.src
http://pzc.nio.name/?p=282
http://www.boy110.com/apache-htaccess/
http://blog.sina.com.cn/s/blog_5398c3200100b4in.html~type=v5_one&label=rela_nextarticle
http://www.fastmirrors.org/smokeping/probe/TelnetJunOSPing.en.html
http://hi.baidu.com/qu6zhi/blog/item/41eae42e3f455e594fc226a7.html
http://blogs.techrepublic.com.com/networking/?p=334
Install Smokeping on openBSD：http://idur.staff.uns.ac.id/tag/smokeping/page/2/
http://blog.sina.com.cn/s/blog_6151984a0100euux.html###
http://www.mw.net.tw/user/lindahu/blog/2005/04/26/1502/5188/
http://www.mw.net.tw/user/lindahu/blog/2005/12/20/1502/18268/
http://bbs.chinaunix.net/viewthread.php?tid=678582&page=1
================================================

在我配置smokeping 的过程中参考了上篇文章，配置过程中有些路径是上下是不对的，在配置的过程不要照抄，要仔细的看一下；总之是一篇不错的文章；

 

下面是我的配置apache的http.conf文件

ScriptAlias /smokeping.cgi "/usr/local/smokeping/htdocs/smokeping.cgi"
Alias /cache "/usr/local/smokeping/htdocs/cache"

<Directory "/usr/local/smokeping ">
AllowOverride None
AddHandler cgi-script cgi
Options ExecCGI
</Directory>
 

附上smokeping 配置文件

*** General ***

owner    = noc
contact  = [email protected]
mailhost = my.mail.host
sendmail = /usr/lib/sendmail
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed ... this is not
# good for images.
imgcache = /usr/local/smokeping/htdocs/cache
#imgurl   = http://192.168.250.107/cache
imgurl   = cache
datadir  = /usr/local/smokeping/var
piddir  = /usr/local/smokeping/var
cgiurl   = http://192.168.250.107/smokeping.cgi
smokemail = /usr/local/smokeping/etc/smokemail
tmail = /usr/local/smokeping/etc/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no

*** Alerts ***
to = [email protected]
from = smokealert@localhost

+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times  in a row

*** Database ***

step     = 100
pings    = 20

# consfn mrhb steps total

AVERAGE  0.5   1  1008
AVERAGE  0.5  12  4320
    MIN  0.5  12  4320
*** Presentation ***

template = /usr/local/smokeping/etc/basepage.html
charset = gb2312
+ charts

menu = Charts
title = The most interesting destinations

++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Standard Deviation %f

++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds

++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f

++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median
format = Median RTT %f seconds

+ overview

width = 600
height = 50
range = 10h

+ detail

width = 600
height = 200
#++ location
#title = Location

*** Probes ***

+ FPing

binary = /usr/local/sbin/fping

*** Slaves ***
secrets= /usr/local/smokeping/etc/smokeping_secrets.dist
#+boomer
#display_name=boomer
#color=0000ff
#+slave2

*** Targets ***

probe = FPing

menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of xxx Company. \
         Here you will learn all about the latency of our network.

+ JIETONG
menu = JIETONG
title = JIETONG

++ 111server
menu = 111server
title = 111server
host = 192.168.250.111

++ 107server
menu = 107server
title =107server
host = 192.168.250.107

++ 217server
menu = 217server
title =217server
host = 217.19.149.132

 

后来用tar包方式安装lamp结构，如果在安装上面配置apache时 会出现提示

“

You don’t have permission to access / on this server”

打开Apache的配置文件httpd.conf ,查找下面这段:
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
修改为
<Directory />
Options Indexes FollowSymLinks
AllowOverride None
<Directory />

重启Apache。